White Paper

Powering your FPGA Applications

Xiao Li, Senior Apps Engineer, Industrial Analog & Power Group, Renesas Electronics Corp.
Billy Yang, Principal Apps Engineer, Industrial Analog & Power Group, Renesas Electronics Corp.
February, 2018

Abstract
Field-programmable gate arrays (FPGAs) have gained much attention and widespread application in
the end market. This document outlines the requirements for FPGA power supply and related issues.
It will also discuss the latest digital power module from Renesas, which can be used as a power supply
solution for FPGA applications, with a detailed introduction to the ISL8274M as an example.

Introduction
FPGAs are widely used in a variety of products
due to their many advantages, including short
development time and flexibility during
development and when reconfiguring or updating
in the field. FPGAs are also cost-effective solutions.

Many new FPGAs are typically designed

using advanced technology to achieve low power
consumption while providing high performance.
Those FPGAs use the new fabrication process that
tends to require a lower core voltage, which extends the voltage range needed for its power supply
with a higher supplying current capability. Many FPGAs also have varying power supply requirements.
Even for the same FPGA, each power rail may have a different output requirement, which depends on
factors such as the voltage and power demands for each rail, the rail’s sequencing requirements, and
noise sensitivity. Power devices with the ability to provide multiple voltage levels in a wider range with
higher current supporting capability for high-power blocks are ideal for those applications with varying
power requirements.

Power modules include the controller, FETs, inductors, and the majority of the passives encapsulated
in a single package, leaving only the input and output bulk capacitors outside to complete the system
design. Digital power modules combine the benefits of power modules and digital power. By using a
digital power module, designers can shorten development time and quickly update power monitoring
and sequencing control functions, which analog solutions cannot provide. Benefiting from improved
voltage regulation accuracy and advanced digital control techniques, digital power modules are
becoming more competitive in FPGA applications.

This document will discuss the general power requirements of FPGA and introduce the Intersil
ISL8274M from Renesas, explaining how its main features satisfy the requirements for powering
FPGAs.

White Paper – Powering your FPGA Applications Page 1 of 9

.

FPGA Power Requirements

An FPGA power supply is normally used to transfer input voltage, which is usually from a DC bus
supplied by a switching mode power supply (SMPS) with a typical range from 5V to 12V, down to the
voltage required by FPGA sub-blocks and auxiliary circuits. Figure 1 shows the general structure of an
FPGA power supply system.

1ST Voltage Core

Regulator Voltage

2ND Voltage I/O

Regulator Voltage FPGA
3RD Voltage Auxiliary
Regulator Voltage

Input
Reset VREF
Power
Supply One or
Two Chip Voltage Voltage
Solution Supervisor Reference

Sequencer
(Optional)

4TH Voltage DDR SDRAM

Regulator

Figure 1. General structure of FPGA power system.

There are various blocks in an FPGA. These blocks may include the core, I/O port with different voltage
standards, and auxiliary circuits that encompass internal circuits such as bias circuit, phase locked loop
circuit, and transceiver. The block also features external DDR memory. Below is a description of the
supply voltage for each part and its specific power requirements.

Core Voltage
Core voltage supplies the internal core of configurable logic blocks and tends to require lower supply
voltage, especially for high-performance FPGAs with a low power consumption requirement. The logic
core generally has the most demanding current requirements, which can be up to tens of Amps.

I/O Voltage
I/O voltage supplies the I/O banks. Its voltage level depends on the specific I/O standard applied to the
FPGA and is usually in the range of 1.2V to 3.3V. To satisfy the working condition of the parts and to
optimize the power performance, the FPGA may employ a different I/O standard for each I/O port, which
could require supporting multiple supply rails. The current load can be different for various cases.
For UltraScale FPGA, the maximum output current needed could be up to tens of Amps.

Auxiliary Voltage
Auxiliary voltage supplies auxiliary circuits in the FPGA, as well as some related external blocks in
the system if needed. It may be completed using varying voltage levels for different manufacturer’s
products. This kind of supply generally needs comparatively lower current. But for some noise sensitive
parts, such as clock/memory circuit, they would have a harsher voltage requirement on output
variation.

White Paper – Powering your FPGA Applications Page 2 of 9

Table 1 lists the specific voltage requirements of some high-performance FPGA products on the
market. It is usually recommended by the FPGA manufacturer to supply FPGA with voltages within
±5% or ±3% of nominal. Some sensitive parts, such as PLL, could require an even lower voltage of
around 2%, as shown in Table 1. This should be considered as a target in the power design stage.

Table 1. Some high-performance FPGAs with their voltage conditions recommended

Core voltage range Auxiliary voltage range I/O voltage range

FPGA model
(tolerance), V (tolerance), V (tolerance), V

Spartan-7 1.0 (50 mv) 1.8 (5%) 1.2 to 3.3 (5%)

Spartan-7 (-1LI) 0.95 (30 mv) 1.8 (5%) 1.2 to 3.3 (5%)

Artix-7 1.0 (50 mv) 1.8 (5%) 1.2 to 3.3 (5%)

Artix-7 (-2LE) 0.9 (30 mv) 1.8 (5%) 1.2 to 3.3 (5%)

Kintex-7 (-2LI) 0.95 (20 mv) 1.8 (5%) 1.2 to 3.3 (5%)

2.5 (VCCA_PLL)
Arria II-GX 0.9 (30 mv) 1.2 to 3.3 (5%)
0.9 (VCCD_PLL)

2.5 (VCCA_PLL)
Stratix IV-GX 0.9 (30 mv) 1.2 to 3.0 (5%)
0.9 (VCCD_PLL)

1.2 (50 mv)/ 2.5 (VCCA_PLL)

Cyclone IV 1.2 to 3.3 (5%)
1.0 (30 mv) 1.2/1.0 (VCCD_PLL)

Note: The data listed in the table was obtained from the datasheets of the specific FPGA models listed in Column 1.

Even a small change in voltage causes a reasonable change to static and dynamic power. It is,
therefore, important to have exact voltage control with small tolerance and good output voltage
set-point resolution.

Power Consumption
Power consumption of an actual system may vary significantly. Due to inherent FPGA flexibility,
users in similar applications could end up with different power consumption based on the particular
combination of performance level and specific FPGA features utilized in their design.
Power estimation software provided by the FPGA manufacturer can be used to estimate power
consumption in the FPGA and to understand where power is dissipated. In terms of power supply
design, it gives the designer a sense of the power level needed for the FPGA power supply in the
product development phase and allows the designer to focus on power and thermal optimization.
Generally, static and dynamic power consumed at the core and I/O cause the greatest power
consumption in the FPGA. The maximum current during the worst transient and power-on process
should also be considered when executing the power design.

Startup Voltage Ramping

It is important for the FPGA power supply to have an adjustable soft-start feature with monotonic
output voltage ramping to help prevent excessive inrush current during startup and possibly other
functions. Most FPGAs have requirements on voltage ramp-up time for rails. A slower rising time
could cause failure in the device configuration and incorrect operation. Thus, a power supply with an
adjustable soft-start is preferred in FPGA power applications. The ISL8274M digital power module
provides an advanced soft-start feature, allowing the designer to easily configure a wide range of
soft-start times without changing any physical component.

White Paper – Powering your FPGA Applications Page 3 of 9

Tracking/Power-Up Sequence
Numerous high-performance systems place stringent demands on the order in which the power
supply voltages are turned on. This is particularly true when powering FPGAs. In most cases, the I/O
interface operates at a higher voltage than the core and, therefore, the core supply voltage must not
exceed the I/O supply voltage according to the manufacturers’ specifications. In this condition, the
voltage tracking function is expected to ensure a safe power up. Figure 2 illustrates two typical tracking
modes provided by the ISL8274M: coincident and ratiometric.

VOUT VOUT
Vo1 Vo1

Vo2 Vo2

Time Time
VOUT VOUT
Coincident Ratiometric
Vo1 Vo1
Figure 2. Two typical modes of voltage tracking provided by the ISL8274M.

Vo2 one supply reach its operating voltage before another

In some conditions, it is important to have Vo2
supply reaches it in order to avoid latch-up. This requires power regulators of different rails to power
up in a predetermined sequence. Therefore, a power regulator with a programmable start-up
Time Time
sequence would be particularly useful when powering advanced processors like FPGAs. Most
Coincident Ratiometric
manufacturers recommend a specific power-up sequence in their product documents, which can be
used as a reference in power design.

Pre-Bias Startup
An output pre-bias
VOUT condition exists when an externally applied voltage
VOUT is present on a power supply’s
output before the power supply’s control IC is enabled. Figure 3 illustrates two general conditions of
Desired Output
pre-bias startup with the bias voltage higher or lower than Pre-bias
Voltage the reference voltage before powering up.
These conditions could happen in an FPGA application as well. Voltage
If the FPGA requires safe startup and
the power Desired
supply regulator isn’t allowed to sink current
Pre-bias Output
during start-up, a pre-bias startup condition
Voltage Voltage
should be considered in the power supply regulator to provide pre-bias protection.

VOUT VOUT
Time Time
Desired Output
Voltage TON TON Pre-bias TON TON
Delay Rise Voltage Delay Rise
Pre-bias VPRE-BIAS < VTARGET Desired Output VPRE-BIAS > VTARGET
Voltage Voltage

Time Time
TON TON TON TON
Delay Rise Delay Rise
VPRE-BIAS < VTARGET VPRE-BIAS > VTARGET

Figure 3. Two general pre-bias startup conditions

Multi-Channel/Interleaving
As mentioned previously, multiple power supplies are required to power different FPGA parts.
Therefore, a multi-channel power regulator with an adjustable voltage level would be ideal. This
would allow the designer to use one device to support multiple rails, reducing system size and the
design/layout effort needed.

White Paper – Powering your FPGA Applications Page 4 of 9

As the required supply voltage drops lower and lower, the current supplying capability expected for
the power supply can be high. For some high current conditions, a multiphase operation would be
preferred. Interleaving the connection among phases can help distribute power and thermal stress
into separate phases and reduce the input/output current ripple. The ISL8274M has two channels that
can be set with a distinct voltage level and configured as either two separate channels or a two-phase
condition with an adjustable interleaving setting to support the same rail with a high current rating and
distributed thermal dissipation.

Synchronization/Communication Bus
For FPGA applications, power regulators are typically required to synchronize to a common clock.
Communication among power regulators is expected to broadcast fault information among each
other; then the fault protection can be well managed at the system level. Many power regulators have
a SYNC pin to allow synchronization to a common clock or sync one part to another. The ISL8274M
allows fault spreading and phase spreading functions through the Digital-DC (DDC) bus to enhance the
communication among the same parts.

Point-of-Load (POL) Solution

To power the FPGA hardware system, there are many point-of-load regulator options for power rails,
including LDO, discrete voltage regulator, and power module solutions.

As the FPGA power requirement is usually lower output voltage and higher output current, an ideal
POL solution should support a wide range of output voltages with excellent load transient response.
Performance features such as efficiency under different load conditions, cost, size, package, and
thermal performance should also be considered in order to make the right choice based on the definite
requirements in an FPGA application. Because some systems may need updates or changes after
completing the initial design, a POL solution with an adjustable output configuration and compatibility
setting for adding more rails would be advantageous. System monitoring and fault protection functions
are also critical for many systems, especially for some complex and high-performance applications.

There are many aspects to consider in order to achieve the optimal performance of the overall power
system; unfortunately, some of them will have design trade-offs with others. This requires the designer
to extend considerable effort on validating and testing during design cycles to achieve the overall
optimal point. Ideally, you want to minimize the time spent on your power supply and instead focus
your attention on developing the application on the FPGA. Moreover, many variables can be involved
in analysis/design, which may include the tolerance or derating of the component, a change in the
operating environment, or variation on the design target. Even a small change on one component
may lead to spending extra time on the PCB redesign. Thus, if a power solution can be implemented
with fewer components, it would deliver better reliability and a reduced BOM, which is beneficial for
high-performance systems like FPGAs. All these aspects make the power module a good option for
this application.

Renesas Digital Power Module

As a leading power IC supplier, Renesas has both analog and digital
power modules that are suitable for FPGA power supply applications.
Digital power management provides many benefits such as real-time
monitoring, digital control with fast transient response, reduced BOM,
and decreased design effort. The digital power module solution is flexible
and can adapt to the changing FPGA power requirements of lower voltage, higher current, and
additional rails with less effort. A new voltage rail can be easily added to the power management
system through PMBus®. The Digital-DC communication bus is used to provide the communication
channel between devices, enabling trouble-free communication while providing benefits for such
features as sequencing and fault spreading. Nowadays, many digital power modules can achieve
excellent output voltage regulation accuracy with the exact set-point reference.

White Paper – Powering your FPGA Applications Page 5 of 9

The ISL8274M is a general-purpose step-down digital power module and features PMBus
communications and numerous other characteristics that satisfy the requirements for FPGA power
supplies. It has two channels, which can operate as two separate power rails for different FPGA
parts or can be easily connected in parallel to support the same rail with a high current capability
requirement. Moreover, the ISL8274M has an internal Digital-DC serial bus that enables
communication between other Renesas ICs, allowing easy configuration and implementation of such
functions as power-up sequence, fault protections, and monitoring. Its general application circuit is
shown in Figure 4.

Pin Strap Resistors (Optional)

(Note 1) (Note 2)

VTRKN
VTRKP
VAUX or VCC 3.3V to 5V

PG2
EN1
EN2
PG1
Should be active 10kΩ 10kΩ 10kΩ 10kΩ (Note 3)
before enable
R7 R8 R9 R10 R 11 R12 R 13
R1 R2 R3 R4

SS/TRACK

VTRKN
SA/CFG

VSET1

VSET2

ASCR1

ASCR2

EN1
EN2
PG1
PG2
SYNC/OCP

VTRKP
DDC DDC
SCL SCL
12x100µF 1x470µF
SDA SDA CERAMIC POSCAP
VOUT1
VOUT1 1.5V 30A
SALRT SALRT
2x470µF 8x22µF + 4x47µF
VIN Bulk Ceramic
VIN C8 C9
4.5V to 14V
C1 C2 C3
VDD
10µF
VR5
ISL8274M VSENN1

10µF 10µF VR6 VSENP1

C4 C5
12x100µF 1x470µF
VDRV CERAMIC POSCAP
VCC 10µF 10µF VOUT2
VCC VOUT2 1.5V 30A
R5
C7 VDRV1
100kΩ C6

VSENP2 C8 C9

VSENN2
VMON
SGND

PGND

SWD1

SWD2

VR55
SW1

SW2

R6
VR

6.65kΩ

Notes:
1: R2 and R3 are not required if the PMBus host already has I2C pull-up resistors.
2. Only one R4 per DDC bus is required when multiple modules share the same DDC bus.
3. R7 through R13 can be selected according to the tables for the pin-strap resistor setting in this document. If the

Figure 4. General application circuit of the ISL8274M PMBus configuration is chosen to overwrite the pin-strap configuration, R8 through R13 can be non-populated.

Table 2. Key features of the Renesas ISL8274M digital power module

ISL8274M Key Features

• Complete digital power • ChargeMode™ control loop • Advanced soft-start/stop,

supply architecture sequencing, and tracking
• 30A/30A dual-channel –– 296 kHz to 1.06 MHz fixed • Complete over/under
output current switching frequency voltage, current and
–– 4.5V to 14V single rail operations temperature protections
input voltage –– No compensation required with fault logging
–– Up to 95.5% efficiency –– Fast single clock cycle • PowerNavigator™ support
• Programmable output transient response • Thermally enhanced HDA
voltage • PMBus interface and/or package
–– 0.6V to 5V output voltage pin-strap mode
settings –– Fully programmable
–– ±1.2% accuracy over line/ through PMBus
load/temperature –– Pin-strap mode for
standard settings
–– Real-time telemetry for VIN,
VOUT, IOUT, temperature,
duty cycle, and switching
frequency

White Paper – Powering your FPGA Applications Page 6 of 9

Digital ChargeMode™ Control Scheme
The ISL8274M uses Renesas’ patented ChargeMode™ control scheme, which has the ability to
achieve a fast response when loading the transient with a fixed switching frequency and to support an
all-ceramic output cap design. Delays are reduced between the error-sampling instant and the moment
the PWM is generated using a multi-rate sampling technique and digital filter. This is also an easy
compensation control scheme, achieved without the need for extra passive RC components for
a compensation loop design as required by an analog module. For any in-system change, new
compensation can be easily reconfigured by the PMBus command or PIN-strap setting. A reference
design is provided by the manufacturer for the user’s convenience.

Soft-Start with Adjustable Ramping Time

It may be necessary to set a delay from the time when
an enable signal is received until the output voltage
ramps to its target value. The ISL8274M provides
the customer with an easy process through
PowerNavigator™ to reset both the delay and ramp
time periods precisely and independently. The
ISL8274M also provides pre-bias protection by
sampling the output voltage before initiating an output
ramp in the event a pre-bias condition exists at the
output stage prior to startup. Figure 5 shows the soft
startup process, with startup rising time equal to 5 ms. Figure 5. ISL8274M startup performance

Power Sequencing/Voltage Tracking

A group of power modules for different rails or multiphase operation can be configured to power up
in a predetermined sequence. This feature is especially useful when powering advanced processors,
such as FPGAs, that require one supply to reach its operating voltage prior to another supply reaching
it in order to avoid latch-up. With the ISL8274M, multiple device sequencing is configured by issuing
PMBus commands to assign the preceding device in the sequencing chain, as well as the device that
follows the sequence.

The ISL8274M integrates a voltage tracking scheme that allows one of its outputs (Channel 1 or
Channel 2) to track a voltage that is applied to the VTRKP and VTRKN pins, with no external
components required in two optional modes that are based on the specific application.

Various Protection Functions and Monitoring

A full list of protection functions is supported by the ISL8274M, including power input UV/OV, driver
voltage UV/OV, two levels of output current UC/OC (average and peak), output voltage UV/OV, and
temperature UT/OT. Each protection has both a fault limit and waning limit. The user can set the
corresponding fault limit value easily through PMBus commands. There are also different fault
response mode options from which a customer can choose, including hiccup mode. Additionally,
the user can configure the response function through the PMBus command. The ISL8274M uses
PMBus commands to monitor a wide variety of system parameters.

The most complete protection functions and monitoring items are provided by the ISL8274M. These
functions protect the power system operation in a safer, more robust manner and provide increased
flexibility to the designer in terms of system design.

Digital-DC Communications Bus

The ISL8274M has combined the Digital-DC Communications (DDC) bus used to communicate
between Renesas’ digital power modules and digital controllers. The DDC bus provides the
communication channel between devices for features such as sequencing, interleaving, and fault
spreading.

White Paper – Powering your FPGA Applications Page 7 of 9

Design Tools from Renesas
Evaluation Board/User Guide
An evaluation board and detailed user guide for customer testing and evaluation are available for
the ISL8274M. A photograph of the evaluation board is shown in Figure 6. Additional details can be
obtained through the following link.
(https://www.intersil.com/en/tools/reference-designs/isl8274meval1z.html)

Figure 6. The ISL8274M Evaluation Board

PowerNavigator™
The PowerNavigator GUI software offered by Renesas will help accelerate the design, testing,
finalization, and debugging of your power design. It connects to development boards through
PMBus to set various adjustable system parameters and threshold values. The final configuration
is simply stored to non-volatile memory. Figure 7 shows an example of the PowerNavigator GUI
software windows. (www.intersil.com/powernavigator)

Figure 7. Screenshot of PowerNavigator windows

White Paper – Powering your FPGA Applications Page 8 of 9

PowerCompass™ Multi-load Configurator
The PowerCompass tool helps users quickly identify parts that match their specific requirements,
set up multiple rails, perform high-level system analysis, and generate custom reference design files.
The tool is available exclusively as a web app, from which users can also work offline. Detailed
instructions and a video tutorial are available online and can help the user get started easily.
(www.intersil.com/powercompass)

1 Define Your Power 2 Select 3 Summary 4 Generate

Requirements Parts Analysis Reference Designs

iSim™ Design & Simulation Tool

Renesas provides a web-based power simulation tool called iSim, which is an easy-to-use, interactive
power management and op-amp design tool. iSim allows the user to quickly select supporting
components and design and simulate their circuit and system.
Detailed instructions and a video tutorial are available online
and can help with easily getting started.
(www.intersil.com/isim)

Additional Resources
For other online resources provided by Renesas for FPGA power design, go to:
https://www.intersil.com/en/applications/fpga-power-solutions.html

© 2018 Renesas Electronics America Inc. (REA). All rights reserved. All trademarks and trade names are those of their respective owners. REA believes the information herein was accurate when given but assumes no
risk as to its quality or use. All information is provided as-is without warranties of any kind, whether express, implied, statutory, or arising from course of dealing, usage, or trade practice, including without limitation as to
merchantability, fitness for a particular purpose, or non-infringement. REA shall not be liable for any direct, indirect, special, consequential, incidental, or other damages whatsoever, arising from use of or reliance on the
information herein, even if advised of the possibility of such damages. REA reserves the right, with out notice, to discontinue products or make changes to the design or specifications of its products or other information
herein. All contents are protected by U.S. and international copyright laws. Except as specifically permitted herein, no portion of this material may be reproduced in any form, or by any means, without prior written
permission from Renesas Electronics America Inc. Visitors or users are not permitted to modify, distribute, publish, transmit or create derivative works of any of this material for any public or commercial purposes.

Document No.: R16WP0001-EU0000-POWER-MODULE

White Paper – Powering your FPGA Applications Page 9 of 9