Scribd
Upload
277 views

Insert Bowls: Den-Con Tool Company Data Book & Technical / Operational / Service Manual

This document provides information on rotary equipment bushings and master bushings used in oil drilling operations. It includes a table that lists different bushing types that can be used with various sizes of rotary tables. It also provides guidance on inspecting bushings for wear and maintaining them by keeping surfaces clean and lubricated. An interchange listing is given for compatible insert bowls and master bushings made by Den-Con and Varco.

Uploaded by

Jacek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
277 views

Insert Bowls: Den-Con Tool Company Data Book & Technical / Operational / Service Manual

This document provides information on rotary equipment bushings and master bushings used in oil drilling operations. It includes a table that lists different bushing types that can be used with various sizes of rotary tables. It also provides guidance on inspecting bushings for wear and maintaining them by keeping surfaces clean and lubricated. An interchange listing is given for compatible insert bowls and master bushings made by Den-Con and Varco.

Uploaded by

Jacek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

GO TO MAIN INDEX

DEN-CON TOOL COMPANY


DATA BOOK
&
TECHNICAL / OPERATIONAL / SERVICE MANUAL

INSERT BOWLS
ROTARY EQUIPMENT AND BUSHINGS
ROTARY
TABLE BUSHING TYPE 8 5/8” - 2 3/8” 10 3/4” - 9 5/8” 13 3/8” - 11 3/4” 16” 20” - 18 5/8” 22” 24” 26” 30” 36”
SIZE
49 1/2” SCB Split Casing Bushing 8025 w/8025-16 8025 Body 8026 Body 8027 Body 8028 Body 8029 Body
R-750 Master Bushing 8011 w/8018 Std 8011 w/8019 8011 w/8020 8030 Body
8011 w/8017 500 T
8011 w/8016 750 T
37 1/2” SCB Split Casing Bushing 3316 w/3312 w/2529 3316 w/3312 w/2531 3316 w/3312 3316 w/3311 3316 Body 3317 Body 3318 Body 3319 Body
HMB Master Bushing 2701 w/2706 2701 w/2707 2701 w/2708
27 1/2” SCB Split Casing Bushing 3310 w/3312 w/2529 3310 w/3312 w/2531 3310 w/3312 3310 w/3311 3310 Body
UCB Solid Casing Bushing 2805 w/2807 w/2529 2805 w/2807 w/2531 2805 w/2807 2805 w/2806 2805 Body
UCB Solid Casing Bushing 2805 w/2809 2805 w/2808
SPB Solid Pin Drive Master Bushing 2528 w/2530 2528 w/2532 2528 w/2533
SMB Split Pin Drive Master Bushing 3300 Body
SSB Solid Square Drive Master Bushing 2508 w/2510
SSB Solid Square Drive Master Bushing 2508 w/2546 Ext. 2508 w/2547 Ext. 2508 w/2548 Ext.
SSD Split Square Drive Master Bushing 2524 Body
22-23 SCB Split Casing Bushing 2815 Body 2816 Body
UCB Solid Casing Bushing 2803 Body 2804 Body
SPB Solid Pin Drive Master Bushing 3325 w/2529 3325 w/2531
SMB Split Pin Drive Master Bushing 3320 Body
SSD Split Square Drive Master Bushing 2521 Body
20 1/2” UCB Solid Casing Bushing 2800 w/2529 2800 w/2531 2800 Body 2802 Body
SPB Solid Pin Drive Master Bushing 2527 w/2529 2527 w/2531 2527 Body
SMB Split Pin Drive Master Bushing 3309 Body
SSB Solid Square Drive Master Bushing 2506 w/2509
SSB Solid Square Drive Master Bushing 2506 w/2545 Ext.
SSD Split Square Drive Master Bushing 2523 Body
17 1/2” UCB Solid Casing Bushing 2800 w/2529 2800 w/2531 2800 Body
SMB Split Pin Drive Master Bushing 3315 Body
SSB Solid Square Drive Master Bushing 2505 w/2509
SSB Solid Square Drive Master Bushing 2505 w/2545 Ext.
SSD Split Square Drive Master Bushing 2522 Body
Specify rotary table size and manufacturer when ordering outer bodies
GO TO MAIN INDEX

DEN-CON TOOL COMPANY


DATA BOOK

INSPECTION

Casing bushings should be inspected visually for vertical or radial grooves in the slip
setting area. Grooves in the slip taper area will cause excessive wear on the slips and will
also cause the slips to stick in the bowl when weight is taken off the string.

A straight edge should be used vertically in the bore area to determine if excess wear has
occurred in the tapered area. A gap or clearance under the straight edge means wear is
present and that slips and pipe could be damaged as weight is set on the slips.

CARE AND MAINTENANCE

Clean and lubricated surfaces are the most important maintenance points for casing bush-
ings. Prior to installation in the rotary table, clean and lubricate the table bore. During
operations, frequently lubricate the slip taper bore in the casing bushing to help prevent
differential sticking of the slips.
GO TO MAIN INDEX

DEN-CON TOOL COMPANY


DATA BOOK
&
TECHNICAL / OPERATIONAL / SERVICE MANUAL

MASTER BUSHINGS & insert bowls


INSERT BOWLS
INTERCHANGE listing
DEN-CON VARCO DEN-CON VARCO DEN-CON VARCO
PART # PART # PART # PART # PART # PART #
2501 1001 2532 1904 2542 1014
2502 1002 2533 1903 2543 1811
2503 1003 2700 6600 2544 1013
2504 1005 2701 6601 2536 1815
2509 1024 2706 6608 2537 1816
2510 1025 2707 6609 2511 1021
2525 1801 2708 6610 2712 6699
2526 1804 3300 5429 2534 1813
2528 1808 3309 70526 2535 1814
2529 1809 2514 1015 2713 3699
2530 1810 2515 — 2709 6605
2531 1902 2541 1016 2711 6604
50106-24 1030 2715 6606

You might also like