750-557, 750-559 / 753-557, 753-559

4-Channel Analog Output Module ±10V/0-10 V

13 14
A
Function C
B
Error D
A1 A2 Data contacte
1 5
A
AO 1 AO 2 AO 1 AO 2 AO D
Logic

M M

Common 2 6
Common Common Function
(ground) 270 pF
(ground) (ground) 24 V
A3 A4
3 7
AO 3 AO 4 AO 3 AO 4
0V
M M

4 8
10nF
Common Common Common Common
(ground) (ground) (ground) (ground)
750-557 750-557

Power jumper contacts

Fig. Series 750 / Technical data see page 28 / Delivery without Mini WSB marker
Series 750 / 753 marking see pages 16 ... 17 / 18 ... 19

The analog output module creates a standardized signal of ±10 V or 0-10 V.

The output signal is electrically isolated and will be transmitted with a

resolution of 12 bits.

The system voltage supply is used for the power supply of the module.

The output channels of the module have one common potential.

Pack.
Description Item no.
unit Technical Data
1)
4AO ± 10V DC 750-557 10 No. of outputs 4
4AO 0-10V DC 750-559 101) Current consumption max. (internal) 125 mA
4AO 0-10V DC/T 750-559/025-000 1 Voltage supply via system voltage DC/DC
(Operating temperature -20 °C ... +60 °C) Signal voltage ±10 V (750-557, 753-557)
4AO ±10V DC (without connector) 753-557 101) 0 V ... 10 V (750-559, 753-559)
4AO 0-10V DC (without connector) 753-559 101) Load impedance > 5 kΩ
Resolution 12 bits
Conversion time (typ.) 10 ms
Output filter settle time typ. 100 ms
Measuring error (25 °C) < ± 0.1 % of the full scale value
Temperature coefficient < ± 0.01 % /K of the full scale value
1)
Also available individually Isolation 500 V system/supply
Pack. Bit width 4 x 16 bits data
Accessories Item no.
unit 4 x 8 bits control/status (option)
753 Series connector 753-110 25 Wire connection CAGE CLAMP®
Coding elements 753-150 100 Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths (750 / 753 Series) 8 ... 9 mm / 0.33 in
Miniature WSB quick marking system, 9 ... 10 mm / 0.37 in
plain 248-501 5 Width 12 mm
with marking see pages 256 ... 257 Weight 53.5 g
EMC 1-Immunity to interference acc. to EN 50082-2 (1996)
EMC 1-Emission of interference acc. to EN 50081-1 (1993)
EMC marine applications -
Approvals
Immunity to interference acc. to Germanischer Lloyd (2003)
Series 750 and 753 EMC marine applications -
Conformity marking 1 Emission of interference acc. to Germanischer Lloyd (2003)
r UL 508
4 r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Series 750
4 EN 60079-15 I M2 / II 3 GD Ex nA IIC T4
Marine applications see "Approvals Overview" in section 1

Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: [email protected]
10.09.2008 Hansastr. 27 •D-32423 Minden Fax: +49(0)571/887-169 www.wago.com