ST.

ANNE’S
COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE, New Delhi. Affiliated to Anna University, Chennai)
(An ISO 9001: 2015 Certified Institution)
ANGUCHETTYPALAYAM, PANRUTI – 607 106.

STUDENT NAME YEAR/SEM III/V

REGISTER NO DATE
SUBJECT CODE & NAME EE8551-MICROPROCESSOR & MICROCONTROLLERS

MULTIPLE CHOICE QUESTIONS

UNIT-2
(50X1=50 Marks)
1.Consider the following registers:
1. Accumulator and flag register
2. B and C register
3.D and E register
4. H and L register
Which of these 8-bit register of 8085 microprocessors can be paired together to make a 16-bit
register?
a. 1,3 and 4
b. 2,3 and 4
c. 1,2 and 3
d. 1,2 and 4
2. In 8085 microprocessor system with memory mapped I/O, which of the following is true?
a) Devices have 8-bit address line
b) Devices are accessed using IN and OUT instructions
c) There can be maximum of 256 input devices and 256 output devices
d) Arithmetic and logic operations can be directly performed with the I/O data
3. Which is the microprocessor comprises:
a. Register section
b. One or more ALU
c. Control unit
d. All of these

4.  What is the store by register?

a. data
b. operands
c. memory
d. None of these
5. The data in the stack is called:
a. Pushing data
b. Pushed
c. Pulling
d. None of these

6.In an intel 8085 microprocessor, why is READY signal used?

a. To indicate to user that the microprocessor is working and is ready for use.
b. To provide proper WAIT states when the microprocessor is communicating with a slow peripheral device.
c. To slow down a fast-peripheral device so as to communicate at the microprocessor’s device.
d. None of the above.
7. Consider the following:
i) sign flag ii)Trap flag iii) Parity flag iv) Auxiliary flag
which one of the above flag is/are present in 8085microprocessor?
a. (I) only
b. (I) & (II)
c. (II) & (III)
d. (I) ,(III) & (IV)

8. Consider the following statements:

5. The structure shown below is known as ____________

a) Parallel form structure

b) Cascade structure
c) Direct form
d) None of the mentioned
6.  Which of the following equation is True?
a) [ΩP/ΩC]2N=10−KP/10+1
b) [ΩP/ΩC]2N=10KP/10+1
c) [ΩP/ΩC]2N=10−KP/10−1
d) None of the mentioned
7.  Which of the following is true in the case of Butterworth filters?
a) Smooth pass band
b) Wide transition band
c) Not so smooth stop band
d) All of the mentioned
8. What is the magnitude frequency response of a Butterworth filter of order N and cutoff frequency Ω C?
a) 1/ √1+(Ω/Ωp)2N
b) 1+(Ω/Ωp)2N
c) √1+(Ω/Ωp)2N
d) None of the mentioned
9.  What is the transfer function of Butterworth low pass filter of order 2?
a) 1/ s2+2√s+1
b) 1/ s2−2√s+1
c) s2−√2s+1
d) s2+√2 s+1
10. What is the transfer function of Butterworth low pass filter of order 1 ?
a) 1/ s+1
b) s+1
c) s2+√2 s+1
11. What is the transfer function of Butterworth low pass filter of order 3?
a) (s+1)(s2+s+1)
b) s+1
c) s2+√2 s+1
d) 1/(s+1)(s2+s+1)
12. What is the transfer function of Butterworth low pass filter of order 4 ?
a) (s2+0.76537s+1) (s2+1.8477s+1)
b) 1/ (s2+0.76537s+1) (s2+1.8477s+1)
c) s+1
13. What is the transfer function of Butterworth low pass filter of order 5 ?
a) (s+1)( s2+0.61803s+1)( s2+1.61803s+1)
b) 1/(s+1)( s2+0.61803s+1)( s2+1.61803s+1)
c) (s2+0.76537s+1) (s2+1.8477s+1)
14. What is the Butterworth filter of order N
a) N ≥ log( √ 10αs-1/100.1αp-1) / log (Ωs/Ωp)
b) N = log( √ 10αs-1/100.1αp-1) / log (Ωs/Ωp)
c) N = log( √ 10αs-1/100.1αp-1)
15. what is € value in Butterworth filter
a) √100.1αp -1
b) 100.1αp -1
c) 1/√100.1αp -1
16. what is λ value in Butterworth filter
a) √100.1αs -1
b) 100.1αp -1
c) 1/√100.1αp -1

20. For given α p =1 dB , αs = 30dB , Ωp= 200 rad/sec and Ωs =600rad/sec. Determine the order of
filter N
a) 4
b) 3
c) 3.5
21. For given α p =2 dB , αs = 10dB , Ωp= 20 rad/sec and Ωs =30rad/sec. Determine the order of filter
N
a) 4
b) 3
c) 3.5
22. For given specification 0.9 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.2, 0.4 ≤ Ω ≤л
Detremine the order of filter N
a) 4
b) 3
c) 3.5
23. For given specification 0.9 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.2, 0.4 л ≤ Ω ≤л
Detremine the value of €
a) 0.48
b)0.56
c) 0.89

24. For given specification 0.9 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.2, 0.4 л ≤ Ω ≤л
Detremine the valuen of λ
a) 4.89
b)0.56
c) 0.89
25. For given specification α p =0.5 dB , αs = 22dB , fp= 10KHz and fs =25KHz. Detremine the order
of N
a) 4
b)0.56
c) 0.89
26. For given specification α p =0.5 dB , αs = 22dB , fp= 10KHz and fs =25KHz. Detremine the cut-off
frequency Ωc value
a)0.56
b) 0.89
c)81.68
27. What is the chebyshev filter of order N
a) N ≥ cosh-1( √ 10αs-1/100.1αp-1) / cosh-1 (Ωs/Ωp)
b) N = log( √ 10αs-1/100.1αp-1) / cosh-1 (Ωs/Ωp)
c) N = log( √ 10αs-1/100.1αp-1)

28. Find the chebyshev filter minnor axis formula

a) Ωp [µ1/N- µ-1/N] /2
b) Ωs [µ1/N- µ-1/N] /2
c) Ωp [µ1/N- µ-1/N]
29. Find the chebyshev filter major axis formula
a) Ωp [µ1/N+ µ-1/N] /2
b) Ωs [µ1/N- µ-1/N] /2
c) Ωp [µ1/N- µ-1/N]

30. Find Chebyshev filter µ value

a) ƹ -1 +√ ƹ- 2 + 1
b) ƹ -1 -√ ƹ- 2 + 1
c) ƹ -1 -√ ƹ- 2

31.Find pre-warpping formula

a) Ω= 2/ T[tan w/2]
b) Ω= 2[tan w/2]
c) Ω= [tan w/2]
32. The cut off frequency 1000Hz find Ω value
a) Ω =2000Л
b) Ω= 3000Л
c) Ω= 1000Л
33. The cut off frequency 2000Hz find Ω value
a) Ω= 3000Л
b) Ω= 4000Л
c) Ω= 1000Л
34. Find the formula of impulse invariance method
a) H(Z)= Ck / 1-epk z-1
b) H(Z)= Ck ( 1-epk z-1)
c) H(s) = Ck / s-pk
35. Find the formula of bilinear transformation method
a) H(z) = 2/T[ 1-z -1/ 1+z-1]
b) H(z) = 2[ 1-z -1/ 1+z-1]
c) H(s) = Ck / s-pk
36. Find the poles of chebyshev filter
a) Sk = a cosфk+jb sinфk
b) Sk = cosфk+j sinфk
c) Sk = a cosфk+ sinфk

37. For given specification 0.9 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.2, 0.4 л ≤ Ω ≤л
Detremine the value of pass band frequency Ωp
 a) Ωp =0.2л
b) 0
c) л
38. For given specification 0.9 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.2, 0.4 л ≤ Ω ≤л
Detremine the value of stop band frequency Ωs
a) Ωp =0.2л
b) 0
c) Л
d) Ωs =0.4л
40. For given specification α p =3 dB , αs = 16dB , fp= 1KHz and fs =2KHz. Determine the order of N
using chebyshev filter

a) 5
b) 4
c) 2

41. For given specification α p =3 dB , αs = 16dB , fp= 1KHz and fs =2KHz. Determine the minor axis “a”
Value using chebyshev filter
a) a= 5
b) a=910.17л
c) a=910.17

42. For given specification α p =3 dB , αs = 16dB , fp= 1KHz and fs =2KHz. Determine the major axis
Value “ b” using chebyshev filter
a) 2196.5л
b) 2196.5
c) 2053 л

43. Find the formula of фk = л/2=[2k-1/2N] л

a) фk = л/2+[2k-1/2N] л
b) фk = 2k-1/2N] л
c) фk = л/2[2k-1/2N] л
44. For given specification 0.7 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.3, 0.6 л ≤ Ω ≤л
Detremine the value of pass band frequency Ωp
a) Ωp =0.2л
b) Ωp = 0
c) Ωp =л
45. For given specification 0.7 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.3, 0.6 л ≤ Ω ≤л
Detremine the value of pass band frequency Ωs
a)Ωs =л
b) Ωs =0.2л
c) Ωs =0.6л
46. For given specification 0.7 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.3, 0.6 л ≤ Ω ≤л
Detremine the value of ƹ
a) Ƹ=1.019
b) Ƹ=0.008
c) Ƹ=2.01
47. For given specification 0.7 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.3, 0.6 л ≤ Ω ≤л
Detremine the value of λ
a) λ =2.17
b) λ=3.17
c) λ=1.08
48. For given specification 0.7 ≤. │H(ejw)│≤ 1 for 0 ≤ Ω ≤0.2л , │H(ejw)│≤0.3, 0.6 л ≤ Ω ≤л
Detremine the value of N using Butterworth filter
a) N= 3
b) N=5
 c) N=2
49. Determine the € value for Butterworth filter satisfying the following constrains √0.5 ≤. │H(ejw)│≤ 1 for
With T=1 apply impulse invariant transformation
a) Ƹ=1
b) Ƹ=0.008
c) Ƹ=2.01
50. Determine the λ value for Butterworth filter satisfying the following constrains √0.5 ≤. │H(ejw)│≤ 1 for
With T=1 apply impulse invariant transformation
ANSWER SHEET
Q.No. Answer Mark Q.No. Answer Mark Q.No. Answer Mark
1 18 35
2 19 36
3 20 37
4 21 38
5 22 39
6 23 40
7 24 41
8 25 42
9 26 43
10 27 44
11 28 45 -
12 29 46
13 30 47
14 31 48
15 32 49
16 33 50
17 34
TOTAL