BLOCKWORK

ACCESSORIES
CATALOGUE

www.ikkgroup.com
 About SFSP 4

INDEX Block Ladder Reinforcement 19

Block Ladder Locations 30

Reinforcement

1
www.sfsp-ikk.com
ABOUT
SFSP
 Specialized Factory for Steel Products Co. Ltd
Sigma Factory for Steel Products
www.sfsp-ikk.com

Specialized/Sigma Factory for Steel Products (SFSP) was first established in KSA in 1989 and has been expanding
ever since through a variety of products and through its geographical presence.
Production at the factory is observed using modern practices of manufacturing methods in the steel construction
industry with a definite compliance to international standards of fabrication.

SFSP has manufacturing facilities in KSA, UAE, Egypt, and Lebanon. SFSP adapts quickly and easily to market
demands and requirements. The factory is operating a top of the line production machinery, fully automated with
highest technology to ensure quality and maintain speed with delicacy.

Quality at SFSP is uncompromised; the factories have been able to acquire ISO 9001: 2015 Quality Management
System, ISO 14001:2015 Environmental Management certified factory, and OHSAS 18001:2015 Occupational,
Health and Safety Management factory.

HOT-DIP GALVANIZATION
SFSP has an in-house state of the art Hot-Dip Galvanization facility, which permits a full control of the quality of its
finished products, offering better services to its clients globally.

4
 Specialized Factory for Steel Products Co. Ltd
www.sfsp-ikk.com

Specialized Factory for Steel Products Co., ltd,

which is part of Isam Khairi Kabbani Group
of companies is a leading fabricator of steel
construction products serving the kingdom of
Saudi Arabia since 1989.

The factory operates under TQM ISO modules,

using the latest modern technology in the
steel fabrication and manufacturing industry
in conformity with International standards for
safety and in compliance with the environmental
regulations in the Kingdom.

The factory has inaugurated its new manufacturing

facilities which is located in the 3rd Industrial Area
of Jeddah with a total built facilities of 37,000
squared meters.

The facilities include two manufacturing areas, a hot dip galvanization advanced section, warehousing areas
and administrative building. The project is an advanced environmental low emissions factory built with a definite
consideration of the safety of its workers and visitors.

5
 Specialized Factory for Steel Products Co. Ltd
Sigma Factory for Steel Products
www.sfsp-ikk.com

TECHNICAL SERVICES
A crucial factor in the job of a factory is to provide continuous technical services and consultations.
That’s why SFSP has invested in a professional team of researchers and specialists.

SFSP has recruited brilliant graduates and experienced engineers having the appropriate know on the on latest
technology changes and development in the steel building materials industry.

The product range is developed and updated according to the relevant standards of fabrication across markets,
whilst the business processes are evaluated to achieve maximum efficiency.

SFSP R&D Core Objectives

- Carry out responsibilities effectively in a safe and healthy work environment.
- Develop and implement research programs relevant to the products and solutions introduced and ensure that the
results are communicated clearly in-house and among the clients , concisely and accurately.

DESIGN AND ENGINEERING OFFICE - GERMANY

Unitech Deutshland GmbH is the design and

engineering office of Unitech for Building and
Construction Materials and is situated in Stuttgart,
Germany.

6
SOCIAL RESPONSIBILITY
Being socially responsible is a part of who we are and
how we do our business. We aim to provide useful
products and services, to provide jobs and development
opportunities for our communities, and to gain
satisfaction through meaningful work.
We make a difference by acting on the values and
principles of our societies and we inspire others to do
so. At SFSP, we anticipate and reduce threats caused
by environmental changes or natural disasters, and we
are well adapted to significant social changes.
We contribute to a more sustainable society by means
of value and support to our consumers, supply chains,
and stakeholders. We are keen to identify ways they
can improve our impacts on the people and places we
work and live in, and thereby become more valuable
and valued members of society.

- Organizational governance: We promote accountability

and transparency at all levels, thus, promoting - Fair operating practices: Practicing accountability and
responsibility fairness in dealings with other businesses
- Human care: We treat individuals with respect; and
make efforts to help members of vulnerable groups At SFSP, we are committed to continuous improvement
- Labor practices: We provide just, safe and favorable – ongoing learning, process review and innovative
conditions to workers thinking that foster new initiatives; and better practices.
- Environment: At SFSP, we Identify and improve Our environmental programs evolve to meet today’s
environmental impacts of our operations, including the changing needs while; protecting resources for future;
resource use of natural resources and waste disposal. generations.

HEALTH AND SAFETY

The Factory Management regard the health and safety 2. Ensures that all facilities and equipment are safe and
of the employees, clients and all others that may be properly maintained.
affected by their operations to be of a major importance. 3. 
Provides products that can be applied and used
safely and without risk to health.
In support of this, the management promotes health 4. Provides and maintain working procedures, that are
and safety throughout the Factory’s operations safe and without risk to health, throughout the its
and endeavour to engender a positive attitude in all operations in respect of:
employees towards the prevention of accidents and •T he use, handling, storage, transports and disposal
maintenance of healthy working arrangements. of materials and substances.
• The use of factory equipment.
The Factory satisfies the requirements of the Health, •P otential emergency situations, including first aid,
Safety and related legislation by setting out the fire and escape of substances.
responsibilities of all levels of staff and the arrangements 5. Ensure the competence of employees.
for carrying out those responsibilities and in particular
do what is reasonably practicable to: The factory is an OHSAS 18001:2007 Occupational,
1. Maintains safe & healthy working conditions. Health and Safety Management certified Factory.

7
ENVIRONMENTAL AWARENESS
SFSP is committed to the following:
•C  ompliance with all statutory and regulatory
requirements related to its activities, products and
services and the environmental aspects.
• Identifying quality and environmental objectives by
review and audit of the processes both in-house and
on-site.
•F  ormally setting objectives based on the results of
the process reviews and their significance in relation
to their impact on the environment and the continual
improvement of the quality and environmental
management system.
• Implementing management programs to achieve
these objectives.
• Investing in a well-trained and motivated workforce.
•W  orking closely with suppliers and customers to
ensure mutual understanding and benefits of the
environmental aspects consideration.
•R  eviewing our policy and objectives as part of the
Management Review Process.
•C  ommunicating this policy to all persons working for SFSP operates under environmental management
or on behalf of the organization. system certification BS EN ISO 14001:2004 and
•P  reventing and minimizing Pollution to the environment. maintain it through registration and annual review.

SFSP facilities are equipped with the most technologically advanced machinery amongst are Laser
Cut Machines, Robot Bending Sets, Welding Robot Sets, sophisticated Cable Management Production
Lines, as well as Specialized Industrial Sections for its Hot Dip Galvanization facilities.

8
CNC MACHINES

WELDING
ROBOT
SETS

CNC FIBER LASER

PUNCHING CUT

ROBOTIC
BENDING
CELL

9
SFSP CERTIFICATION

ISO 14001 Certified ISO 18001 Certified

(Environment Management System) (Health & Safety Management system)

ISO 9001 certified

(Quality Management
System)

10
 BS EN 61537:2007
(KEMA certified for cable management products)

11
 UL Certification*

* for SFSP UAE

12
 CERTIFICATE OF COMPLIANCE
Certificate Number 20170811-R38825
Report Reference R38825-20170811
Issue Date 2017-AUGUST-11

Issued to: Sigma Factory for Steel Products

Saih Shuaib 3, 4 R/A Dubai Industrial City
Opposite DEWA Substation
Dubai UNITED ARAB EMIRATES

This is to certify that CHUTE-TYPE FIRE DOORS

representative samples of Chute-type fire door and frame assembly of the insulated
type, rated up to and including 2 hr, 450°F Temperature
Rise Rating.

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10B, Fire Tests of Door Assemblies

Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

13
 Specialized Factory for Steel Products Co. Ltd
Sigma Factory for Steel Products
www.sfsp-ikk.com

SFSP PRODUCTS
SFSP produces a variety of products ranging from cable management systems; cable trays, cable ladders, basket
trays, trunkings and support systems, to mechanical cladding fixations, steel lintels and block work accessories,
Plaster beads, expanded metal and block work reinforcement, strut channel systems, pipe clamps & hangers,
gypsum profiles as well as garbage and linen chutes. With the introduction of new machines and the enhancement
of production methods, SFSP continues to develop its production methods systematically as well as thoroughly.
Its design office in Stuttgart, Germany provides a comprehensive design and calculation case studies, enabling the
factory to have the safety factors required for the usage of its products.

Cable Trays & Accessories

Cable Trays are designed to meet most requirements of cable and
electrical wire installations and comply to local and international
standards of fabrications and finishes.

Cable Ladders (Welded & Swaged)

Cable Ladders of different side heights are available upon request.

Basket Trays & Accessories

SFSP’s Basket Tray systems make connections fast and simple with
limited need for tools. Its design allows for continuous airflow, and
prevents heating up of cables. SFSP’s Basket Tray comes in a full
range of sizes and is made with high-strength welded steel wires.

Cable Trunkings
Cable Trunkings and Accessories are offered in a comprehensive
range. Mill galvanized, hot-dip galvanized, and powder coated are the
various finishes produced in our factories.

Underfloor Trunking
Underfloor Trunking Systems solutions incorporate a range of products
for the distribution of power and data services , it is a coordinated set of
containments that protect, segregate, contain, and route cables within
a given environment.

14
Cable Management Support Systems
Cable Support Systems are well designed to provide necessary support for cable
trays, cable ladders and trunkings. Cable supports are manufactured according to
common standards from high quality raw materials.

C-Channel Strut Systems

SFSP’s Metal Framing Systems provide an economical solution for electrical,
mechanical and industrial supports with a wide variety of applications in the
construction industry.
Applications: - Pipe and Conduit Supports - Tunnel Pipe Stanchions - Racks and
Shelvings - Wall Framings.

Expanded Metals, Plasterers` Beads

Expanded Metals help the formation of joints, protection of corners and resistance
against cracks, chips and impact damage.

Block Ladder Reinforcement

SFSP ladder and truss types are used for the reinforcement of brick and block
masonry to give improved tensile strength to walls subjected to lateral loading e.g.
wind and seismic. SFSPblock reinforcements reduces the risk of cracking either at
stress concentration around opening.

Steel Lintels & Block Work Accessories

Steel Lintels provide a combination of strength and light weight, resulting in efficient
load bearing performance and increased productivity on site. They are characterized
by their ease of installation in addition to time as well as money saving.

Pipe Clamps & Hangers

Pipe Clamps and Hangers from SFSP used in the support of pipes and equipments
are manufactured according to the highest standards of fabrication.A diversified
choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps,
J and U-Bolts and Threaded Accessories.

Marble & Granite Fixings

Stangle Cladding Fixation includes design, calculation and production of several
types of mechanical fixings and accessories used for cladding purposes. Stainless
and galvanized steel are among the various materials used in the fabrication.

Dry Wall & Ceiling Profiles

SFSP provides a complete product range for dry wall and ceiling constructions.
Studs, Runners, Furring Channels, Ceiling Channels and Wall Angles are among the
range of products produced to service the dry wall installers.

Garbage & Linen Chutes

Chutes from SFSP are very convenient, simple and low cost method of controlling
and disposing of refuse and linen. Chutes meet the most stringent requirements
of environmental health and safety. Chutes are used as original equipment in new
buildings, such as : Hotels, Hospitals, High Rises and Residential Towers.

15
 SFSP Products are solely distributed by UNITECH for Building and
Construction Materials

All Products Manufactured by SFSP are Solely Distributed by SFSP Sister Companies in the Following
Countries

KSA BAHRAIN UAE

Isam Kabbani & Partners for Building Isam Kabbani Trading Est. Issam Kabbani Trading Est. –
and Construction Materials Co., Ltd. ‫مؤسسة عصام قباين التجارية‬ ‫مؤسسة عصام قباين للتجارة‬
‫رشكة عصام قباين ورشكاه ملواد األنشاء والتعمري املحدودة‬

KUWAIT OMAN EGYPT

Hassan Kabbani for General Isam Kabbani & Partners UNITECH Egypt for Building
Contracting Est. Trading Co. Materials
‫مؤسسة حسان قباين للمقاوالت العامة للمباين‬ ‫رشكة عصام قباين ورشكاه للتجارة‬ ‫رشكة يونيتك مرص ملواد البناء‬

JORDAN LEBANON

Jordan Build Co. for Building & UNITECH ME s.a.r.l –

Construction Materials – ‫م‬.‫م‬.‫رشكة يونيتك ميدل إيست ش‬
‫رشكة بناء األردن ملواد اإلنشاء و التعمري و الكهرباء‬

SFSP CUSTUMER SERVICE CALL CENTER

KSA UAE
+966 13 8590097, Ext. 3214 +971 4 8181925, Ext. 4269

16
IKK UNITECH
Group of Companies ISAM KABBANI & PARTNERS FOR
BUILDING & CONSTRUCTION MATERIALS
The IKK Group is a major business institution,
serving most of the Arab World in the industrial, Isam Kabbani & Partners for buildings &construction
construction and trading fields, as well as in materials co. Ltd (UNITECH) which is part of
specialized maintenance and services. the IKK group of companies is recognized and
acknowledged for the quality and reliability of its
Today, the IKK Group of Companies is a pioneer in products and services as well as for the commitment,
waterproofing, weatherproofing, building material professionalism and experience of its employees.
supplies, UPVC and CPVC and high density
polyethylene pipes and fittings and several other Isam Kabbani & partners for buildings & construction
products for the construction industry. materials co. Ltd (UNITECH) core values are to offer
value products and services to its clients, to work
The Group is also represented in the sanitary closely with them in a lasting business partnership that
products, steel production, kitchen manufacturing, provides an outstanding performance.
telecommunications, food, decoration, re-
insurance and real estate business domain. A partnership based on trust, harmony, and a hard to
beat services and solutions.
Composed of 60 companies, the IKK Group
operates through almost 200 divisions, branches Our Factories have acquired, in addition to ISO
and outlets; it is spread over 12 countries, covering 9001:2008 Quality Management System, the ISO
all major cities in the region and employing around 14001:2004 Environmental Management System.
13,000 employees.
Our care for the environment has been translated via
Our vision is to maintain and improve our leading Isam Kabbani &partners for buildings &construction
position as a contractor whose reputation is built materials co. Ltd (UNITECH)’s membership in the US
on the ability to completely satisfy customers by Green Building Council as a Golden Member.
providing high quality services. As specialists in
their respective fields, our teams of professionals
are dedicated to a standard of excellence for
quality and performance, through continuous
development, which will set standards in our
industry.
We are simply providing solutions for a future of
success.

Our mission is to provide our part of the Arab

World with local and reliable services in a variety of
sectors and products.

To create employment to thousands of personnel

and in-house training for hundreds of young Arab
graduates in crucial sectors to the benefit of the
IKK Group, the graduates themselves and their
own communities.

To set a good example of our basic business

philosophy: “Hire well, train well, pay well and treat
well.”

17
 BLOCK WALL
REINFORCEMENT

www.sfsp-ikk.com
BLOCK LADDER
REINFORCEMENT
SFSP ladder and truss types are used for the reinforcement of brick and block masonry to give improved tensile
strength to walls subjected to lateral loading e.g. wind and seismic.

Uni-Metal block reinforcements reduces the risk of cracking either at stress concentration around opening.
Calculations are provided by our design office in Stuttgart, Germany.

SPECIFICATIONS

Uni-Metal reinforcement truss type are manufactured by resistance welding of ASTM A82 cold drawn steel wire
deformed at predetermined centers conforming to BS 4483:2005.

DIMENSIONS

• Hot-dip galvanized.
- Main wire diameter = 4.0 mm 4.8 mm
- Rung and diagonal wire diameter = 4.0 mm 4.8 mm
- Rung wire centers = 400 mm

• Stainless steel AISI 304

- Main wire diameter = 4.0 mm 4.8 mm
- Rung and diagonal wire diameter = 4.0 mm 4.8 mm
- Round wire centers = 400 mm

The production of cold reduced steel wires complies to BS 4483:2005 and ASTM A951 / A951M - 11 Standard
Specification for Steel Wire for Masonry Joint Reinforcement

a) Mechanical Properties
- Specified characteristic strength: 460 N/mm2 (Mpa)
- Tensile strength min 510 N/mm2 (Mpa)

b) Chemical composition of steel

- Carbon C max. 0,25 %, Sulphur S:max 0.06 %
- Carbon equivalent value Ceq: max 0.4 %, Ceq=C+Mn/6+ (Cr + V + Mo)/5+ (Cu x Ni)/15

SFSP Block ladder (Ladder type and Truss type) are continuous lengths of joint reinforcement that are embedded into
the horizontal joints of masonry walls.

Block reinforcement offers the following benefits:

- Increases lateral flexural strength.
- Reduces cracking that can arise from thermal stresses.
- Bonds exterior and interior masonry withes together in composite or cavity walls.
- Bonds masonry at intersecting walls and corners.
- Increases performance of masonry wall under various stresses
 LADDER TYPE
Dimensions Length
Item Number Description Type Material
(mm) (mm)
SOBLLS_F_00074797 Block Ladder - Ladder Type T Shape 100x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00058459 Block Ladder - Ladder Type T Shape 150x4.0/400 3000 GI (Galvanized Steel)
SOBLLS_F_00074801 Block Ladder - Ladder Type T Shape 150x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00043736 Block Ladder - Ladder Type T Shape 175x4.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00058463 Block Ladder - Ladder Type T Shape 200x4.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00043764 Block Ladder - Ladder Type T Shape 200x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00043744 Block Ladder - Ladder Type T Shape 225x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00043748 Block Ladder - Ladder Type T Shape 250x4.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00043768 Block Ladder - Ladder Type Overlap 250x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00058451 Block Ladder - Ladder Type T Shape 50x4.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00074793 Block Ladder - Ladder Type T Shape 50x5.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00055973 Block Ladder - Ladder Type T Shape 75x4.00/400 3000 GI (Galvanized Steel)
SOBLLS_F_00108923 Block Ladder - Ladder Type Overlap 100x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00057001 Block Ladder - Ladder Type T Shape 100x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043604 Block Ladder - Ladder Type Overlap 100x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00074455 Block Ladder - Ladder Type T Shape 100x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043528 Block Ladder - Ladder Type Overlap 150x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00063347 Block Ladder - Ladder Type T Shape 150x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043608 Block Ladder - Ladder Type Overlap 150x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00074459 Block Ladder - Ladder Type T Shape 150x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043564 Block Ladder - Ladder Type Overlap 175x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00040484 Block Ladder - Ladder Type T Shape 175x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043576 Block Ladder - Ladder Type Overlap 200x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00065105 Block Ladder - Ladder Type T Shape 200x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043612 Block Ladder - Ladder Type Overlap 200x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00074805 Block Ladder - Ladder Type T Shape 200x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043572 Block Ladder - Ladder Type Overlap 225x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00040588 Block Ladder - Ladder Type T Shape 225x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043588 Block Ladder - Ladder Type Overlap 250x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00065121 Block Ladder - Ladder Type T Shape 250x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043624 Block Ladder - Ladder Type Overlap 250x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00040534 Block Ladder - Ladder Type T Shape 250x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00040564 Block Ladder - Ladder Type Overlap 50x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00056961 Block Ladder - Ladder Type T Shape 50x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00043592 Block Ladder - Ladder Type Overlap 50x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00065129 Block Ladder - Ladder Type T Shape 50x5.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00040622 Block Ladder - Ladder Type Overlap 75x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00022440 Block Ladder - Ladder Type T Shape 75x4.00/400 3000 Hot Dip Galvanized
SOBLLS_F_00022428 Block Ladder - Ladder Type T Shape 50x4.00/400 3000 Hot Dip Galvanized

20
 Dimensions Length
Item Number Description Type Material
(mm) (mm)
SOBLLS_F_00058459 Block Ladder - Ladder Type Overlap 100x4.0/400 3000 Hot Dip Galvanized
SOBLLS_F_00044082 Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00058431 Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00044088 Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00058435 Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00044094 Block Ladder - Ladder Type Overlap 200x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00058447 Block Ladder - Ladder Type T Shape 200x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00095665 Block Ladder - Ladder Type T Shape 200x5.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00060407 Block Ladder - Ladder Type T Shape 250x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00077079 Block Ladder - Ladder Type Overlap 50x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00058427 Block Ladder - Ladder Type T Shape 50x4.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00044042 Block Ladder - Ladder Type T Shape 50x5.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057435 Block Ladder - Truss Type T Shape 100x4.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057487 Block Ladder - Truss Type T Shape 100x5.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057447 Block Ladder - Truss Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057459 Block Ladder - Truss Type T Shape 200x4.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057519 Block Ladder - Truss Type T Shape 200x5.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057471 Block Ladder - Truss Type T Shape 250x4.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057523 Block Ladder - Truss Type T Shape 250x5.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057423 Block Ladder - Truss Type T Shape 50x4.00/400 3000 SS A4 (Stainless Steel)
SOBLTS_F_00057477 Block Ladder - Truss Type T Shape 50x5.00/400 3000 SS A4 (Stainless Steel)
SOBLLS_F_00043972 Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00101077 Block Ladder - Ladder Type T Shape 100x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00043978 Block Ladder - Ladder Type Overlap 150x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00101083 Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00069993 Block Ladder - Ladder Type Overlap 150x5.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00100027 Block Ladder - Ladder Type Overlap 200x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00101099 Block Ladder - Ladder Type T Shape 200x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00069999 Block Ladder - Ladder Type Overlap 200x5.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00043960 Block Ladder - Ladder Type Overlap 250x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00069975 Block Ladder - Ladder Type Overlap 50x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00101071 Block Ladder - Ladder Type T Shape 50x4.00/400 3000 SS A6 (Stainless Steel)
SOBLLS_F_00069963 Block Ladder - Ladder Type Overlap 50x5.00/400 3000 SS A6 (Stainless Steel)

21
Accessories
Dimensions
Item Number Description Type Material
(mm)
Bends, Tee-branches, and intersections
SOBLLA_F_00007062 Ladder 90D - Accessory Overlap 100x4.00/400 GI (Galvanized Steel)
can be manufactured upon request.
Corner units provide continuity y of SOBLLA_F_00007260 Ladder 90D - Accessory Overlap 100x5.00/400 GI (Galvanized Steel)
reinforcement this can be cut and bent SOBLLA_F_00007118 Ladder 90D - Accessory Overlap 150x400/400 GI (Galvanized Steel)
on site.
SOBLLA_F_00007284 Ladder 90D - Accessory Overlap 150x500/400 GI (Galvanized Steel)

SOBLLA_F_00007164 Ladder 90D - Accessory Overlap 200x4.00/400 GI (Galvanized Steel)

SOBLLA_F_00007308 Ladder 90D - Accessory Overlap 200x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00007196 Ladder 90D - Accessory Overlap 250x4.00/400 GI (Galvanized Steel)

L - Junction
Ladder SOBLLA_F_00007588 Ladder 90D - Accessory Overlap 250x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00007220 Ladder 90D - Accessory Overlap 50x4.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 50x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00010894 Ladder 90D - Accessory Overlap 100x4.00/400 Hot Dip Galvanized

SOBLLA_F_00082143 Ladder 90D - Accessory Overlap 100x5.00/400 Hot Dip Galvanized

SOBLLA_F_00010902 Ladder 90D - Accessory Overlap 150x400/400 Hot Dip Galvanized

SOBLLA_F_00082151 Ladder 90D - Accessory Overlap 150x500/400 Hot Dip Galvanized

SOBLLA_F_00010910 Ladder 90D - Accessory Overlap 200x4.00/400 Hot Dip Galvanized

SOBLLA_F_00082159 Ladder 90D - Accessory Overlap 200x5.00/400 Hot Dip Galvanized

SOBLLA_F_00010918 Ladder 90D - Accessory Overlap 250x4.00/400 Hot Dip Galvanized

SOBLLA_F_00082167 Ladder 90D - Accessory Overlap 250x5.00/400 Hot Dip Galvanized

SOBLLA_F_00010886 Ladder 90D - Accessory Overlap 50x4.00/400 Hot Dip Galvanized

SOBLLA_F_00082135 Ladder 90D - Accessory Overlap 50x5.00/400 Hot Dip Galvanized

SOBLLA_F_00050573 Ladder 90D - Accessory Overlap 100x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050603 Ladder 90D - Accessory Overlap 100x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050579 Ladder 90D - Accessory Overlap 150x400/400 SS A4 (Stainless Steel)

SOBLLA_F_00050609 Ladder 90D - Accessory Overlap 150x500/400 SS A4 (Stainless Steel)

SOBLLA_F_00050585 Ladder 90D - Accessory Overlap 200x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050615 Ladder 90D - Accessory Overlap 200x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050591 Ladder 90D - Accessory Overlap 250x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050621 Ladder 90D - Accessory Overlap 250x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050567 Ladder 90D - Accessory Overlap 50x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050597 Ladder 90D - Accessory Overlap 50x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050649 Ladder 90D - Accessory Overlap 100x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050679 Ladder 90D - Accessory Overlap 100x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050655 Ladder 90D - Accessory Overlap 150x400/400 SS A6 (Stainless Steel)

SOBLLA_F_00050685 Ladder 90D - Accessory Overlap 150x500/400 SS A6 (Stainless Steel)

SOBLLA_F_00050661 Ladder 90D - Accessory Overlap 200x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050691 Ladder 90D - Accessory Overlap 200x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050667 Ladder 90D - Accessory Overlap 250x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050697 Ladder 90D - Accessory Overlap 250x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050643 Ladder 90D - Accessory Overlap 50x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_000 50673 Ladder 90D - Accessory Overlap 50x5.00/400 SS A6 (Stainless Steel)

22
 Dimensions
Item Number Description Type Material
(mm)

SOBLLA_F_00007968 Equal T-Branch - Accessory Overlap 100x4.00/400 GI (Galvanized Steel)

SOBLLA_F_00008068 Equal T-Branch - Accessory Overlap 100x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00007996 Equal T-Branch - Accessory Overlap 150x400/400 GI (Galvanized Steel)

SOBLLA_F_00008092 Equal T-Branch - Accessory Overlap 150x500/400 GI (Galvanized Steel)

T - Junction
SOBLLA_F_00008020 Equal T-Branch - Accessory Overlap 200x4.00/400 GI (Galvanized Steel) Ladder
SOBLLA_F_00008130 Equal T-Branch - Accessory Overlap 200x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00008036 Equal T-Branch - Accessory Overlap 250x4.00/400 GI (Galvanized Steel)

SOBLLA_F_00008164 Equal T-Branch - Accessory Overlap 250x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00005464 Equal T-Branch - Accessory Overlap 50x4.00/400 GI (Galvanized Steel)

SOBLLA_F_00008060 Equal T-Branch - Accessory Overlap 50x5.00/400 GI (Galvanized Steel)

SOBLLA_F_00050711 Equal T-Branch - Accessory Overlap 100x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050751 Equal T-Branch - Accessory Overlap 100x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050719 Equal T-Branch - Accessory Overlap 150x400/400 SS A4 (Stainless Steel)

SOBLLA_F_00050759 Equal T-Branch - Accessory Overlap 150x500/400 SS A4 (Stainless Steel)

SOBLLA_F_00050727 Equal T-Branch - Accessory Overlap 200x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050767 Equal T-Branch - Accessory Overlap 200x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050735 Equal T-Branch - Accessory Overlap 250x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050775 Equal T-Branch - Accessory Overlap 250x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050703 Equal T-Branch - Accessory Overlap 50x4.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050743 Equal T-Branch - Accessory Overlap 50x5.00/400 SS A4 (Stainless Steel)

SOBLLA_F_00050791 Equal T-Branch - Accessory Overlap 100x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050831 Equal T-Branch - Accessory Overlap 100x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050799 Equal T-Branch - Accessory Overlap 150x400/400 SS A6 (Stainless Steel)

SOBLLA_F_00050839 Equal T-Branch - Accessory Overlap 150x500/400 SS A6 (Stainless Steel)

SOBLLA_F_00050807 Equal T-Branch - Accessory Overlap 200x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050847 Equal T-Branch - Accessory Overlap 200x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050815 Equal T-Branch - Accessory Overlap 250x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050855 Equal T-Branch - Accessory Overlap 250x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050783 Equal T-Branch - Accessory Overlap 50x4.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00050823 Equal T-Branch - Accessory Overlap 50x5.00/400 SS A6 (Stainless Steel)

SOBLLA_F_00010982 Equal T-Branch - Accessory Overlap 100x4.00/400 Hot Dip Galvanized

SOBLLA_F_00011022 Equal T-Branch - Accessory Overlap 100x5.00/400 Hot Dip Galvanized

SOBLLA_F_00010990 Equal T-Branch - Accessory Overlap 150x400/400 Hot Dip Galvanized

SOBLLA_F_00011030 Equal T-Branch - Accessory Overlap 150x500/400 Hot Dip Galvanized

SOBLLA_F_00010998 Equal T-Branch - Accessory Overlap 200x4.00/400 Hot Dip Galvanized

SOBLLA_F_00011038 Equal T-Branch - Accessory Overlap 200x5.00/400 Hot Dip Galvanized

SOBLLA_F_00011006 Equal T-Branch - Accessory Overlap 250x4.00/400 Hot Dip Galvanized

SOBLLA_F_00011046 Equal T-Branch - Accessory Overlap 250x5.00/400 Hot Dip Galvanized

SOBLLA_F_00010974 Equal T-Branch - Accessory Overlap 50x4.00/400 Hot Dip Galvanized

SOBLLA_F_00011014 Equal T-Branch - Accessory Overlap 50x5.00/400 Hot Dip Galvanized

23
 TRUSS TYPE

Dimensions Length
Item Number Description Type Material
(mm) (mm)

SOBLTS_F_00075203 Block Ladder - Truss Type T-Shape 100x4.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012766 Block Ladder - Truss Type T-Shape 100x5.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00075207 Block Ladder - Truss Type T-Shape 150x4.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012770 Block Ladder - Truss Type T-Shape 150x5.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00082987 Block Ladder - Truss Type T-Shape 200x4.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012774 Block Ladder - Truss Type T-Shape 200x5.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012758 Block Ladder - Truss Type T-Shape 250x4.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012778 Block Ladder - Truss Type T-Shape 250x5.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00075199 Block Ladder - Truss Type T-Shape 50x4.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00012762 Block Ladder - Truss Type T-Shape 50x5.00/400 3000 GI (Galvanized Steel)
SOBLTS_F_00022456 Block Ladder - Truss Type T-Shape 100x4.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022476 Block Ladder - Truss Type T-Shape 100x5.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022460 Block Ladder - Truss Type T-Shape 150x400/400 3000 Hot Dip Galvanized
SOBLTS_F_00022480 Block Ladder - Truss Type T-Shape 150x500/400 3000 Hot Dip Galvanized
SOBLTS_F_00022464 Block Ladder - Truss Type T-Shape 200x4.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022484 Block Ladder - Truss Type T-Shape 200x5.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022468 Block Ladder - Truss Type T-Shape 250x4.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022488 Block Ladder - Truss Type T-Shape 250x5.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00022472 Block Ladder - Truss Type T-Shape 50x5.00/400 3000 Hot Dip Galvanized
SOBLTS_F_00080145 Block Ladder - Truss Type T-Shape 150x400/400 3000 MS Hot Dip Galvanized
SOBLTS_F_00080149 Block Ladder - Truss Type T-Shape 200x4.00/400 3000 MS Hot Dip Galvanized
SOBLTS_F_00080153 Block Ladder - Truss Type T-Shape 250x4.00/400 3000 MS Hot Dip Galvanized
SOBLTS_F_00080137 Block Ladder - Truss Type T-Shape 50x4.00/400 3000 MS Hot Dip Galvanized
SOBLTS_F_00082175 Block Ladder - Truss Type T-Shape 75x4.00/400 3000 MS Hot Dip Galvanized
SOBLTS_F_00057275 Block Ladder - Truss Type Overlap 100x4.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057399 Block Ladder - Truss Type T-Shape 100x5.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057383 Block Ladder - Truss Type T-Shape 150x4.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057403 Block Ladder - Truss Type T-Shape 150x5.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057387 Block Ladder - Truss Type T-Shape 200x4.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057407 Block Ladder - Truss Type T-Shape 200x5.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057391 Block Ladder - Truss Type T-Shape 250x4.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057411 Block Ladder - Truss Type T-Shape 250x5.00/400 3000 SS A6 (Stainless Steel)
SOBLTS_F_00057271 Block Ladder - Truss Type T-Shape 50x400/400 3000 SS A6 (Stainless Steel)

24
25
Accessories
Bends, Tee-branches, and intersections can be manufactured upon request.
Corner units provide continuity of reinforcement this can be cut and bent on site.
L - Junction
Dimensions Truss
Item Number Description Type Material
(mm)

SOBLTA_F_00075659 90D - Truss Accessory T-Shape 100x4.00/400 GI (Galvanized Steel)

SOBLTA_F_00075679 90D - Truss Accessory T-Shape 150x4.00/400 GI (Galvanized Steel)
SOBLTA_F_00075665 90D - Truss Accessory T-Shape 200x4.00/400 GI (Galvanized Steel)
SOBLTA_F_00075653 90D - Truss Accessory T-Shape 50x4.00/400 GI (Galvanized Steel)
SOBLTA_F_00085437 90D - Truss Accessory T-Shape 150x4.00/400 MS Hot Dip Galvanized
SOBLTA_F_00108909 90D - Truss Accessory T-Shape 50x4.00/400 MS Hot Dip Galvanized

Dimensions
Item Number Description Type Material
(mm)
SOBLTA_F_00011222 Equal Tee - Truss Accessory Overlap 100x4.00/400 Hot Dip Galvanized
SOBLTA_F_00011262 Equal Tee - Truss Accessory Overlap 100x5.00/400 Hot Dip Galvanized
SOBLTA_F_00011230 Equal Tee - Truss Accessory Overlap 150x4.00/400 Hot Dip Galvanized
SOBLTA_F_00011270 Equal Tee - Truss Accessory Overlap 150x5.00/400 Hot Dip Galvanized
SOBLTA_F_00011238 Equal Tee - Truss Accessory Overlap 200x4.00/400 Hot Dip Galvanized
T - Junction
Truss
SOBLTA_F_00011278 Equal Tee - Truss Accessory Overlap 200x5.00/400 Hot Dip Galvanized
SOBLTA_F_00011246 Equal Tee - Truss Accessory Overlap 250x4.00/400 Hot Dip Galvanized
SOBLTA_F_00011286 Equal Tee - Truss Accessory Overlap 250x5.00/400 Hot Dip Galvanized
SOBLTA_F_00011214 Equal Tee - Truss Accessory Overlap 50x4.00/400 Hot Dip Galvanized
SOBLTA_F_00011254 Equal Tee - Truss Accessory Overlap 50x5.00/400 Hot Dip Galvanized
SOBLTA_F_00069481 Equal Tee - Truss Accessory T-Shape 100x4.00/400 GI (Galvanized Steel)
SOBLTA_F_00069465 Equal Tee - Truss Accessory T-Shape 150x4.00/400 GI (Galvanized Steel)
SOBLTA_F_00012686 Equal Tee - Truss Accessory Overlap 150x5.00/400 GI (Galvanized Steel)
SOBLTA_F_00069497 Equal Tee - Truss Accessory T-Shape 200x4.00/400 GI (Galvanized Steel)

PULLOUT BOX
The GI Pullout Box is supplied in retainer boxes made from galvanized sheet steel, for the reliable transmission of
shear forces. The GI Pullout Box, designed to ensure the exact distance between rods, in which the holes are made
slightly bigger than the rod diameter.
Material Used: Galvanized sheet, different zinc coatings.
Gi Pullout Box Length: 1.2m, 2.44m, 3m (other length can be manufactured upon request.)
Gi Pullout Box Width: 100mm – 400mm (other widths, smaller or larger can be arranged.)
Hole Diameter: 10mm – 25mm (other punching required, can be done.)
Material Thickness: 0.4mm – 1.5mm as standard (other thicknesses can be manufactured upon request)
Covers: According to the requirements.

26
 Dimensions
Item Number Description Material
(mm)
SCUC_F_00073485 Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
SCUC_F_00073479 Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
SCUC_F_00073473 Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
SCUC_F_00091265 Pull Out Bar Box 200x35-35x0.70x1000 GI (Galvanized Steel)
SCUC_F_00062363 Pull Out Bar Box 200x35-35x0.70x1200 GI (Galvanized Steel)
SCUC_F_00093351 Pull Out Bar Box 200x35-35x0.80x1000 GI (Galvanized Steel)
SCUC_F_00093473 Pull Out Bar Box 200x35-35x0.80x1200 GI (Galvanized Steel)
SCUC_F_00065295 Pull Out Bar Box 200x40-40x0.70x2400 GI (Galvanized Steel)
SCUC_F_00065289 Pull Out Bar Box 215x40-40x0.70x2400 GI (Galvanized Steel)
SCUC_F_00062369 Pull Out Bar Box 250x35-35x0.70x1200 GI (Galvanized Steel)
SCUC_F_00091271 Pull Out Bar Box 250x35-35x0.80x1000 GI (Galvanized Steel)
SCUC_F_00093467 Pull Out Bar Box 250x35-35x0.80x1200 GI (Galvanized Steel)
SCUC_F_00093345 Pull Out Bar Box 260x35-35x0.80x1000 GI (Galvanized Steel)
SCUC_F_00093461 Pull Out Bar Box 260x35-35x0.80x1200 GI (Galvanized Steel)
SCUC_F_00075467 Pull Out Bar Box 280x35-35x0.70x1200 GI (Galvanized Steel)
SCUC_F_00110621 Pull Out Bar Box 290x25-25x0.8x2000 GI (Galvanized Steel)
SCUC_F_00108479 Pull Out Bar Box 290x35-35x0.9x1500 GI (Galvanized Steel)
SCUC_F_00108485 Pull Out Bar Box 290x35-35x0.9x1600 GI (Galvanized Steel)
SCUC_F_00108491 Pull Out Bar Box 290x35-35x0.9x1800 GI (Galvanized Steel)
SCUC_F_00108473 Pull Out Bar Box 290x35-35x0.9x2100 GI (Galvanized Steel)
SCUC_F_00084717 Pull Out Bar Box 300x35-35x0.70x1000 GI (Galvanized Steel) De-
Dimensions
Item Number scripti- Material
SCUC_F_00062357 Pull Out Bar Box 300x35-35x0.70x1200 GI (Galvanized Steel) (mm)
on
SCUC_F_00106347 Pull Out Bar Box 300x35-35x0.80x1200 GI (Galvanized Steel) SCUC_F_00088339 Pull Out 498x34- GI (Galvanized
Bar Cover 34x0.90x1000 Steel)
SCUC_F_00084731 Pull Out Bar Box 325x35-35x0.70x1000 GI (Galvanized Steel)
SCUC_F_00084769 Pull Out 198x34- GI (Galvanized
SCUC_F_00084737 Pull Out Bar Box 350x35-35x0.70x1000 GI (Galvanized Steel) Bar Cover 34x0.70x1000 Steel)
SCUC_F_00084743 Pull Out Bar Box 400x35-35x0.70x1000 GI (Galvanized Steel) SCUC_F_00091761 Pull Out 198x34- GI (Galvanized
Bar Cover 34x0.80x1000 Steel)
SCUC_F_00087829 Pull Out Bar Box 450x35-35x0.70x1000 GI (Galvanized Steel)
SCUC_F_00102843 Pull Out GI (Galvanized
180x40x0.70x2400
SCUC_F_00088837 Pull Out Bar Box 475x35-35x0.90x1000 GI (Galvanized Steel) Bar Box Steel)

SCUC_F_00062351 Pull Out Bar Box 75x35-35x0.70x2400 GI (Galvanized Steel) SCUC_F_00107875 Pull Out GI (Galvanized
220x40x0.70x2400
Bar Box Steel)
SCUC_F_00084775 Pull Out Bar Box 298x34-34x0.70 GI (Galvanized Steel)
SCUC_F_00102829 Pull Out GI (Galvanized
280x40x0.70x2400
Bar Box Steel)
SCUC_F_00084787 Pull Out Bar Cover 323x34-34x0.70x1000 GI (Galvanized Steel)
SCUC_F_00102859 Pull Out GI (Galvanized
SCUC_F_00084805 Pull Out Bar Cover 348x34-34x0.70x1000 GI (Galvanized Steel) Bar Cover
178x39x0.70x2400
Steel)
SCUC_F_00084817 Pull Out Bar Cover 398x34-34x0.70x1000 GI (Galvanized Steel) SCUC_F_00107887 Pull Out GI (Galvanized
218x39x0.70x2400
Bar Cover Steel)
SCUC_F_00087835 Pull Out Bar Cover 448x34-34x0.70x1000 GI (Galvanized Steel)
SCUC_F_00107881 Pull Out GI (Galvanized
218x40x0.70x2400
SCUC_F_00073491 Pull Out Bar Cover 198x30-30x0.70x1200 GI (Galvanized Steel) Bar Cover Steel)

SCUC_F_00099377 Pull Out Bar Cover 198x34-34x0.70x1200 GI (Galvanized Steel) SCUC_F_00102849 Pull Out GI (Galvanized
278x39x0.70x2400
Bar Cover Steel)
SCUC_F_00108503 Pull Out Bar Cover 288x34-34x0.8x1500 GI (Galvanized Steel)
GNA_F_00073505 Pull Out 250x35- GI (Galvanized
Bar SET 35x0.80x1000 Steel)
SCUC_F_00108509 Pull Out Bar Cover 288x34-34x0.8x1600 GI (Galvanized Steel)
GNA_F_00073501 Pull Out 250x35- GI (Galvanized
SCUC_F_00108515 Pull Out Bar Cover 288x34-34x0.8x1800 GI (Galvanized Steel) Bar SET 35x0.80x1200 Steel)
SCUC_F_00108497 Pull Out Bar Cover 288x34-34x0.8x2100 GI (Galvanized Steel) GNA_F_00073497 Pull Out 260x35- GI (Galvanized
Bar SET 35x0.80x1000 Steel)
SCUC_F_00088329 Pull Out Bar Cover 473x34-34x0.80x1000 GI (Galvanized Steel)

27
www.sfsp-ikk.com
LOCATIONS
KIGDOM OF SAUDI ARABIA
[email protected] FACTORIES
Jeddah Tabuk Dammam SFSP - KSA
Tel : +966 12 627 8222 Tel : +966 14 423 5203 Tel : +966 13 859 0097 [email protected]
Fax: +966 12 627 8722 Fax: +966 14 423 5203 Fax: +966 13 857 8177
Specialized Factory for Steel Products
Mak kah/Taif Khamis Mushayt Jubail 3rd Industrial City / Jeddah
Tel : +966 12 541 1206 Tel : +966 17 237 5929 Tel : +966 13 361 4390 Tel: +966 12 637 4482
Fax: +966 12 532 1675 Fax: +966 17 237 8783 Fax: +966 13 362 4499 Fax: +966 12 636 1963
Riyadh Gizan Hofuf SFSP / UAE
Tel : +966 11 292 8200 Tel : +966 17 321 6660 Tel : +966 13 530 1474 [email protected]
Fax: +966 11 456 6627 Fax: +966 17 321 0665 Fax: +966 13 530 7144
SIGMA Factory for Steel Products
Qassim / Buraidah Mad inah DIC (Dubai Industrial City)
Tel : +966 16 382 3946 Tel : +966 14 842 1095 Tel : +971 4 818 1919
Fax: +966 16 385 2186 Fax: +966 14 842 1090
SFSP / Egypt
Skakah / Qurayyat Yanbu [email protected]
Tel : +966 14 626 3904 Tel : +966 14 390 1499
Fax: +966 14 626 3905 Fax: +966 14 322 7101 Specialized Factory for Steel Products
6th of October City Giza
Tel : +20 2 3820 6477
Fax: +20 2 3820 6036

SFSP / Lebanon
[email protected]

Specialized Factory for Steel Products

Tanayel, Bekaa
Tel: +961 8 514 290
Fax: +961 8 514 291

BAHRAIN KUWAIT UNITED ARAB EMIRATES

[email protected] [email protected] [email protected]

Manama Kuwait City Dubai - Al Rashidiyah

Tel : +973 17 874 897 Tel : +965 2 4924 937 Tel : +971 4 2591 773
Fax: +973 17 789 470 Fax: +965 2 4924 938 Fax : +971 4 2591 774

Abu Dhabi - Musaffah

Tel: +971 2 552 3393
Fax: +971 2 552 5499

OMAN JORDAN PAKISTAN

[email protected] [email protected] [email protected]
Muscat Amman Lahore - Punjab
Tel : +968 24 591 006 Tel : +962 6 556 3030 Tel: +92 42 32301578
Fax : +968 24 597 006 Fax: +962 6 554 7911

Aqaba ENGINEERING, DESIGN,

Tel : +962 6 556 3030
Fax: +962 6 554 7911 MARKETING & MULTIMEDIA
Unitech Deutschland GmbH
Germany
[email protected]
EGYPT LEBANON
[email protected] [email protected] Stuttgart
Tel : +49 711 6868 7222
Cairo 6th of October City Beirut Fax: +49 711 6868 7223
Tel : +20 2 3820 6477 Tel : +961 1 858 277
Fax: +20 2 3820 6036 Fax: +961 1 858 276 Multi-D s.a.r.l
Lebanon
[email protected]
Multi-d Beirut
Tel : +961 1 841 155
Fax: +961 1 841 156
LOCATIONS
SFSP makes every effort to maintain the accuracy and
quality of the information provided in this Catalogue.

However, SFSP cannot guarantee and assumes legal

liability or responsibility for the accuracy or completeness
of the information provided.

Whilst every care has been exercised in the

preparation of this catalogue to ensure that any advice,
recommendations or information is accurate, no liability
or responsibility of any kind is accepted.

Project working details should be entrusted to

appropriately qualified and experienced persons, case by
case.

With a policy of continuous product development, SFSP

may modify product design and specification without
due notice.

In case of any questions or remarks, feel free to contact

the R&D Department.

DISTRIBUTED BY:

www.sfsp-ikk.com