Scribd
Upload
99 views5 pages

CISC PVO #1 Blank Form

This document is a cost estimate from Juncan Enterprises for renovations and modifications to a building including: 1) Removing partitions and doors to enlarge rooms, and replacing with new walls and doors. 2) Increasing the size of modular office cubicles and reorienting partitions. 3) Removing and replacing an exit door with a new wall. 4) Relocating a toilet door and electrical room door and building new walls. 5) Removing a wall extension and enclosing rooms with new partitions. 6) Installing a new glass door at an exit. The document provides descriptions of the work, materials, labor costs, and totals for each request.

Uploaded by

Ariel Dela Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views5 pages

CISC PVO #1 Blank Form

This document is a cost estimate from Juncan Enterprises for renovations and modifications to a building including: 1) Removing partitions and doors to enlarge rooms, and replacing with new walls and doors. 2) Increasing the size of modular office cubicles and reorienting partitions. 3) Removing and replacing an exit door with a new wall. 4) Relocating a toilet door and electrical room door and building new walls. 5) Removing a wall extension and enclosing rooms with new partitions. 6) Installing a new glass door at an exit. The document provides descriptions of the work, materials, labor costs, and totals for each request.

Uploaded by

Ariel Dela Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

JUNCAN ENTERPRISES

ITEM MATERIALS LABOR/EQPT. RENTAL TOTAL


DESCRIPTION OF WORK
NO UNIT QTY. PER UNIT TOTAL PER UNIT TOTAL COST
(P) (P) (P) (P) (P)
(1) (2) (3) (10) (11) (12) (13) (14) (15)

REQUEST 1 REMOVAL OF CHB PARTITION BETWEEN READING AND STAFF ROOM


AND ENCLOSING THE STAFF ROOM WITH CHB WALL

EXTRA WORK ORDER

DEMOLITION OF CHB WALL BETWEEN READING ROOM & STAFF ROOM


A. PREPARATORY WORKS
1. Demolition of existing CHB wall partition and restoration of affected
portion of adjacent walls lot 1.00 - 0.00 0.00 0.00 -
2. Dismantling of existing flush door. lot 1.00 - - 0.00 0.00 -

DOOR ENCLOSURE - CHB WALL


B. MASONRY WORKS
1 100mm thk. CHB wall with with 10mm ⌀ rebar spaced 0.60m O.C.,
mortar for filler and laying, plastering, smooth finish (1:3 mortar mix) sq.m 0.00 - - - 0.00 -
C. PAINTING WORKS
1. Masonry wall (Semi-gloss acrylic based latex paint finish, UPLB Beige
color)
a. New painting sq.m 0.00 350.00 - 35.00 - 350.00

DEDUCTIVE ITEM OF WORK

NON-INSTALLATION OF ED-4* OF STAFF ROOM


A. FABRICATION, SUPPLY, DELIVERY & INSTALLATION
1. DOORS
a. ED-4*; Proposed 1 3/4" hollow core flush door on existing door
jamb with 1/4" thk marine plywood skins and single rabbeted stop
door jamb, complete 3 - 3" x 3" loose pin hinges and cylindrical
lockset. Door leaf and jamb to be painted with Quick dry enamel
paint finish (same color as existing), as per plan.
(H=2.1m, W=0.8m) set 1 15,000.00 15,000.00 1,500.00 1,500.00 16,500.00
B. PAINTING WORKS
For the existing door and jamb to be re-used
a. Jamb (Quick dry enamel based paint) lot 1 - - - - -

REQUEST 2 CUBICLE SIZE BE INCREASED FROM 1.50M X 1.50M (LXW) TO


1.75 M X 1.50 M (LXW). REORIENTATION OF L-SHAPED MODULAR PARTITION

EXTRA WORK ORDER

A. FABRICATION, SUPPLY, DELIVERY & INSTALLATION


1. OFFICE CUBICLE
a. 45mm thk. modular wall partition with fabric finish panel sidings,
powder coated aluminum alloy frames. Provide 6mm thk. clear float
glass top partition panel, punch out holes for utilities, 25mm thk.
HPL pre-laminated modular table with PVC edging. Provide plastic
grommet for computer cables (size of holes as per manufacturer's
recommendation), complete with standard parts and accessories,
pre-fabricated/pre-assembled with mobile pedestal,
per construction bulletin plan lot 1.00 - - - - -

DEDUCTIVE ITEM OF WORK

C. FABRICATION, SUPPLY, DELIVERY & INSTALLATION


1. OFFICE CUBICLE
a. 45mm thk. modular wall partition with fabric finish panel sidings,
powder coated aluminum alloy frames. Provide 6mm thk. clear float
glass top partition panel, punch out holes for utilities, 25mm thk.
HPL pre-laminated modular table with PVC edging. Provide plastic
grommet for computer cables (size of holes as per manufacturer's
recommendation), complete with standard parts and accessories,
pre-fabricated/pre-assembled, per plan lot 1.00 500,000.00 500,000.00 50,000.00 50,000.00 550,000.00

REQUEST 3 REMOVAL OF EXIT/SIDE DOOR (ED5) AND TO BE REPLACED WITH CHB WALL

EXTRA WORK ORDER

DISMANTLING OF EXISTING FLUSH DOOR


A. PREPARATORY WORKS
1. Dismantling of existing flush door. lot 1.00 - - 0.00 0.00 -

DOOR ENCLOSURE - CHB WALL


B. MASONRY WORKS
1 100mm thk. CHB wall with with 10mm ⌀ rebar spaced 0.60m O.C.,
mortar for filler and laying, plastering, smooth finish (1:3 mortar mix) sq.m 0.00 - - - 0.00 -
C. PAINTING WORKS
1. Masonry wall (Semi-gloss acrylic based latex paint finish, UPLB Beige
color)
a. New painting sq.m 0.00 350.00 - 35.00 - 350.00

DEDUCTIVE ITEM OF WORK

NON-REPAINTING AND NON-INSTALLATION OF DOOR ACCESSORIES OF ED-5 OF RESEARCH ROOM


A. MISCELLANEOUS AND ALL OTHERS TO COMPLETE THE
WORKS
1. Door accessories for the existing doors to be re-used (Hinges, lockset,
door closer, door closer, door jambs, etc), as per plan lot 1 - - - - -
B. PAINTING WORKS
For the existing door and jamb to be re-used
a. Jamb (Quick dry enamel based paint) lot 1 - - - - -

REQUEST 4
RELOCATION OF TOILET DOOR TO THE ADJACENT WALL

EXTRA WORK ORDER

DISMANTLING OF EXISTING FLUSH DOOR


A. PREPARATORY WORKS
1. Relocation of existing flush door to proposed location as per plan lot 1.00 - - 0.00 0.00 -
2. Demolition of portion existing CHB wall partition lot 1.00 - - 0.00 0.00 -

DOOR ENCLOSURE - CHB WALL


B. MASONRY WORKS
1 100mm thk. CHB wall with with 10mm ⌀ rebar spaced 0.60m O.C.,
mortar for filler and laying, plastering, smooth finish (1:3 mortar mix) sq.m 0.00 - - - 0.00 -
C. PAINTING WORKS
1. Masonry wall (Semi-gloss acrylic based latex paint finish, UPLB Beige
color)
a. New painting sq.m 0.00 350.00 - 35.00 - 350.00

RELOCATION OF ELECTRICAL ROOM DOOR


EXTRA WORK ORDER

DISMANTLING OF EXISTING FLUSH DOOR


A. PREPARATORY WORKS
1. Relocation of existing flush door to proposed location as per plan lot 1.00 - - 0.00 0.00 -

DOOR ENCLOSURE - CHB WALL


B. MASONRY WORKS
1 100mm thk. CHB wall with with 10mm ⌀ rebar spaced 0.60m O.C.,
mortar for filler and laying, plastering, smooth finish (1:3 mortar mix) sq.m 0.00 - - - 0.00 -
C. PAINTING WORKS
1. Masonry wall (Semi-gloss acrylic based latex paint finish, UPLB Beige
color)
a. New painting sq.m 0.00 350.00 - 35.00 - 350.00

REMOVAL OF WALL EXTENSION OF DIRECTOR'S OFFICE AND CONSTRUCTION


OF PARTITION TO ENCLOSE THE ELECTRICAL AND COMFORT ROOMS

EXTRA WORK ORDER

A. PREPARATORY WORKS
1. Demolition of CHB wall extension lot 1.00 - 0.00 0.00 0.00 -

B. WALL FINISHES
1. PW-2A; 6mm thk fiber cement board on galvanized metal framing
drywall partition, as per plan sq.m. 0.00 1,900.00 - 190.00 - 1,900.00
2. Installation of Refurbished Wooden Lattice with Wooden Frame lot 1.00 - - - - -

C. PAINTING WORKS
1. Drywall (Semi-gloss acrylic based latex paint finish) sq. m. 0.00 250.00 - 25.00 - 250.00
2. Refurbished wooden latice (Oil wood stain finish) lot 1.00 - - - - -

DEDUCTIVE ITEM OF WORK

PAINTING WORKS
1. Masonry wall (Semi-gloss acrylic based latex paint finish, UPLB Beige
color)
a. Repainting sq.m 0.00 350.00 - 35.00 - 350.00
REQUEST 5 INSTALLATION OF ALUMINUM FRAMED GLASS DOOR AT THE EXIT DOOR
AT THE CORRIDOR

EXTRA WORK ORDER

A. WALL FINISHES
1. PW-2A; 6mm thk fiber cement board on galvanized metal framing
drywall partition, as per plan sq.m 0.00 1,900.00 - 190.00 - 1,900.00

B. PAINTING WORKS
1. Drywall (Semi-gloss acrylic based latex paint finish) sq. m. 0.00 250.00 - 25.00 - 250.00

C. FABRICATION, SUPPLY, DELIVERY & INSTALLATION


1. DOORS
a. PD-1A; Proposed aluminum framed glass door with fixed side panel
6mm thk bronze tinted float glass on standard analok finish
aluminum door frame, ( Aluminum door frame component shall be
1.5mm thk minimum) 1.5mm thk x 40mm x 100mm close tube
analok finish aluminum jamb, provide fr 25mm thk x 150mm KD
narra wood push/pull plates on both sides, painted with oil wood
stain primer coat and semi-gloss lacquer top coat heavy duty door
closer, key hole lock set, complete with weather stripping lot 1.00 - - - - -

TOTAL ADDITIVE COST


TOTAL DEDUCTIVE COST
TOTAL NET ADDITIVE COST

You might also like