100% found this document useful (1 vote)
147 views2 pages

FPRA (Rectificador)

The document describes the FPRA Flexi Power Rectifier, which is a 6kW AC rectifier package made up of three 2kW AC/DC power modules operating in parallel. It includes a Power Distribution Assembly with integrated battery protection and monitoring features. The rectifier is compact at 3U high and 19 inches wide, designed for outdoor use, with high efficiency and a wide operating temperature and voltage range. It provides 5 distribution circuits and converts AC power to -54VDC nominal output with low ripple and fast hold up time.

Uploaded by

Francisco Reveco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
147 views2 pages

FPRA (Rectificador)

The document describes the FPRA Flexi Power Rectifier, which is a 6kW AC rectifier package made up of three 2kW AC/DC power modules operating in parallel. It includes a Power Distribution Assembly with integrated battery protection and monitoring features. The rectifier is compact at 3U high and 19 inches wide, designed for outdoor use, with high efficiency and a wide operating temperature and voltage range. It provides 5 distribution circuits and converts AC power to -54VDC nominal output with low ripple and fast hold up time.

Uploaded by

Francisco Reveco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FPRA Flexi Power Rectifier

The FPRA is a 6kW output power AC rectifier package made up of three individual 2kW AC/DC power
modules operating in a parallel mode configuration. The FPRA also includes a Power Distribution
Assembly (PDA), which has a fully integrated battery protection LVD, load/battery circuit breakers,
battery current shunt and alarm signals to the BTS EAC interface.

Main features:

 Compact 3U high 19inch wide rectifier module


 Outdoor IP55 compliant stand alone module
 Wide operating temperature & voltage range
 Modular construction for future expansion

GENERAL INPUT
Efficiency >91% AC connection & 240 (US 1-phase)
nominal voltages 230 (Europe 1-phase)
Losses, max <180W
Cooling Fan on each rectifier module 202 (Japan 3-phase delta)
3-phase input supported
Air flow Back to Front
max 350VAC overvoltage up to
IP class IP54 (w/o front/rear covers)
60 seconds
IP55 (with front/rear covers)
AC range, full 180VAC to 315VAC
Operating ambient -40°C to +55°C power
Storage temperature -45°C to +45°C AC range, limited 80VAC to 180VAC
Start up temperature -40°C -> power
Distribution 5 x 63A (2 for loads, 3 for Frequency range 45Hz to 66Hz
batteries) Power factor ≥ 0.95

OUPUT
Nominal voltage -54VDC ± 2V
DC range -40VDC to -58.5VDC
Over voltage -58.5VDC ± 1V
protection
Ripple & noise ≤ 300mV (6kW @ +55°C)
Hold up time ≤ 20mS
Current 37.6A @ -53.3VDC
MECHANICS (Chassis) CONTROL AND MONITORING
Height 3U Controller Integrated in PDA unit
Width 19 inch Display LCD type with buttons
Depth 559mm (with front/rear covers) Functions System monitoring
422mm (w/o front/rear covers) (local/remote)
Weight ~37kg (fully equipped) Parameter setting
~25kg (bare 3U chassis) Temperature compensation
Mounting Vertical/horizontal Float/boost charging
MECHANICS (Rectifier module) Alarm relay definition
Height 100mm Manual/periodic battery test
Width 81.8mm Interface RJ45
Depth 383.7mm
Weight ~3.9kg

You might also like