Scribd
Upload
197 views

Hyperterminal Teraterm

This document provides instructions for downloading log files from a product using a PC, including connecting a 0-modem cable or RS-232 to USB converter, opening Tera Term hyperterminal to select the correct COM port and baud rate, choosing a folder to store downloaded files, downloading files by following product manual instructions, and finding the downloaded log files in the selected folder.

Uploaded by

lucas barrios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
197 views

Hyperterminal Teraterm

This document provides instructions for downloading log files from a product using a PC, including connecting a 0-modem cable or RS-232 to USB converter, opening Tera Term hyperterminal to select the correct COM port and baud rate, choosing a folder to store downloaded files, downloading files by following product manual instructions, and finding the downloaded log files in the selected folder.

Uploaded by

lucas barrios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Product: Several JOWA Service Memo

Date: 2020-11-25
Rev: 0
Sign: Jim

1. Connect a 0-modem cable to the PC.

2. If you don’t have any serial port you need a RS232 to USB converter

3. Start Tera Term hyperterminal

Select Serial and the correct Com port. Press OK


Product: Several JOWA Service Memo
Date: 2020-11-25
Rev: 0
Sign: Jim

4. Select Serial port in the setup menu

5. Select the correct speed. Refer to the manual for the product you want to
download from. Then press New setting

6. Select Log in the File menu and choose a place in the PC where to store the
file with the downloaded files.
Product: Several JOWA Service Memo
Date: 2020-11-25
Rev: 0
Sign: Jim

7. Check the product manual how to download the log and follow the procedures.

8. After completion of downloading files, select Stop Logging in the File menu.

9. This is the downloaded log files in the folder you chose in step 6.

You might also like