Scribd
Upload
208 views2 pages

Steel 40nicrmov15 Clarmhb7 - GB

Uploaded by

Adnan Colo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
208 views2 pages

Steel 40nicrmov15 Clarmhb7 - GB

Uploaded by

Adnan Colo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Steel

CLARMHB7®
40NiCrMoV15

Specifications Composition
40NiCrMoV15
Carbon............................................ 0.40
Manganese...………………………………. 0.10
Chromium....................................... 1.60
Nickel………….………………………………. 3.70
Typical mechanical properties Molybdenum………………………………. 0.90
Vanadium........................................ 0.30
Heat treatment reference
• Oil quench from 875°C. Temper at 560°C:
- UTS: 1480 N/mm2
- 0.2 % Yield strength: 1350 N/mm2
- Elongation (5d): 13 %
Applications
- Impact strength KV -40°C 32 J • Large caliber gun barrels and accessories
(breech rings, breech blocks, muzzle brakes,
• Oil quench from 875°C. Temper at 585°C: etc…)
- UTS: 1350 N/mm2 • Pressure vessels
- 0.2 % Yield strength: 1260 N/mm2 • Mechanical parts in the range of YS 1250 to
- Elongation (5d): 14 % 1400 N/mm2
- Impact strength KV -40°C 40 J

Characteristics
• High mechanical characteristics
• Good impact strength at low temperature
• High level of hardenability
• Good characteristics at high temperatures
• Good temper resistance

CLARM®HB7-
Heat treatment Tempering curve

• Harden:
- Heat to 850/875°C
- Oil quench

• Temper:
- Depending on properties required

Physical properties

• Density: 7.85

• Mean coefficient of expansion in m/m.°C:


- between 20°C and 200°C: 13.56 x 10-6
- between 20°C and 400°C: 14.48 x 10-6
- between 20°C and 650°C: 15.69 x 10-6

• Mean coefficient of elasticity in N/mm2


- at 20°C: 205 x 103

• Critical points:
- Ac 1: 720°C
- Ac 3: 780°C
- Ms: 250°C

Forging

• 1150/850°C
Soft annealed to 670°C

Contact:
www.aubertduval.com
The data provided in this document represent typical or average values rather than maximum or minimum guaranteed values. The applications indicated for the grades described are given as guidance only in
order to help the reader in his personal assessment. Please note that these do not constitute a guarantee whether implicit or explicit as to whether the grade selected is suited to specific requirements.
Aubert & Duval’s liability shall not under any circumstances extend to product selection or to the consequences of that selection.

CLARM®HB7- Patent Numbers: EP2049700, EP2049701 / US8551397, US8252129

You might also like