Scribd
Upload
459 views1 page

Dokumen - Tips Astm f1554 Grade 36 56812cbde4aeb

This document provides a chart with specifications for steel anchors of various diameters that are ASTM F1554 Grade 36. It lists the drill diameter, tensile stress area, embedment depth, and tensile, yield, and shear load capacities for anchor diameters from 1/2 to 3 inches. The values are calculated based on properly installed anchors in concrete with a compressive strength of at least 3500 psi after 28 days.

Uploaded by

Leonardo Christianto Yonathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
459 views1 page

Dokumen - Tips Astm f1554 Grade 36 56812cbde4aeb

This document provides a chart with specifications for steel anchors of various diameters that are ASTM F1554 Grade 36. It lists the drill diameter, tensile stress area, embedment depth, and tensile, yield, and shear load capacities for anchor diameters from 1/2 to 3 inches. The values are calculated based on properly installed anchors in concrete with a compressive strength of at least 3500 psi after 28 days.

Uploaded by

Leonardo Christianto Yonathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Kelken Construction Systems

550 Hartle Street


Suite C
Sayreville, NJ 08872
(732) 416-6730 FAX (732) 416-6733

US Metric Chart ASTM F1554 Grade 36


36 KSI Yield 58 KSI Tensile

Anchor Diameter Drill Diameter Tensile Stress Embed Depth Yield Tensile Shear
in. (mm) in. (mm) Area in. (mm) lb (kn) lb. (kn) lb. (kn)

1/2 5/8 0.142 4 1/4 5112 8236 4118


(12.7) (15.9) (108) (22.7) (36.64) (18.32)
5/8 3/4 0.226 6 8136 13108 6554
(15.9) (19.1) (152) (36.2) (58.31) (29.20)
3/4 7/8 0.334 6 1/2 12024 19372 9686
(19.1) (22.2) (165) (53.5) (86.17) (43.10)
7/8 1 0.462 7 1/2 16632 26796 13398
(22.2) (25.4) (169) (74.0) (119.20) (59.60)
1 1 1/8 0.606 8 1/2 21816 35148 17574
(25.4) (28.6) ( 216) (97.0) (156.35) (78.20)
1 1/8 1 1/4 0.763 10 27468 44254 22127
(28.6) (31.8) (245) (122.1) (196.85) (98.43)
1 1/4 1 3/8 0.969 12 34884 56202 28101
(31.8) (34.9) (205) (237.4) (250.00) (125.00)
1 3/8 1 1/2 1.155 15 41580 66990 33495
(34.9) (38.1) (381) (184.8) (298.00) (149.00)
1 1/2 1 3/4 1.405 18 50580 81490 40745
(38.1) (44.4) (457) (344.23) (362.50) (181.25)
1 3/4 2 1.900 20 68400 110200 55100
(44.4) (50.8) (508) (224.80) (490.20) (245.10)
2 2 1/4 2.500 22 90000 145000 72500
(50.8) (57.2) (559) (400.0) (645.00) (322.50)
2 1/4 2 1/2 3.250 26 117000. 188500 94250
(57.2) (63.5) (660) (520.00) (838.50) (419.25)
2 1/2 2 3/4 4.000 30 144000 232000 116000
(63.5) (69.9) (762) (640.00) (1032.00) (516.00)
2 3/4 3 4.930 34 177480 285940 142970
(69.9) (76.2) (864) (788.80) (1272.00) (363.00)
3 3 1/4 5.970 40 214920 346260 173130
(76.2) (82.5) (1016) (955.20) (1540.30) (770.20)
Steel Strength ASTM F1554 Grade 36
Yield = Fy x Tensile Stress Area
Tensile = Ft x Tensile Stess Area
Shear = .50 x Ultimate Steel Strength

Based on 3500 psi or greater compressive strength concrete 28 days old.

All values based on properly installed Keligrout/Keligrout 101-p per Technical Data Sheets

You might also like