Scribd
Upload
52 views1 page

Dah9v Ficha Ing

This document provides information about home smoke and gas detection systems. It summarizes the specifications of an autonomous smoke detector, including its smoke and temperature sensitivity, current draw, alarm level, and installation requirements. It also outlines the specifications of an autonomous home gas detector, including its power supply, sensitivity, consumption, temperature and humidity operating ranges, and the types of gas it can detect. Additionally, it lists the specifications of an electromechanical gas shut off actuator, such as its size, voltage, power, torque, and temperature and humidity operating ranges.

Uploaded by

kaspare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views1 page

Dah9v Ficha Ing

This document provides information about home smoke and gas detection systems. It summarizes the specifications of an autonomous smoke detector, including its smoke and temperature sensitivity, current draw, alarm level, and installation requirements. It also outlines the specifications of an autonomous home gas detector, including its power supply, sensitivity, consumption, temperature and humidity operating ranges, and the types of gas it can detect. Additionally, it lists the specifications of an electromechanical gas shut off actuator, such as its size, voltage, power, torque, and temperature and humidity operating ranges.

Uploaded by

kaspare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HOME DETECTION Gas and smoke detection

SMOKE HOME DETECTOR

Autonomous smoke detector for fire detection, with acoustic alarm.

Smoke sensibility 0,08~0,15 dB/m


Temperature sensibility 57ºC(model with temperature sensor)
Current in standby 8 μA
Current in alarm 15 mA
Temperature 0ºC to 50ºC
Humidity 0 a 95% HR
Acoustic alarm level 85 dB / 3 m
Dimensions Ø105 x 30 mm

Installation requirements:
• Centre of roof (do not install less than 10 cm from the walls).
Minimum installation recommended:
• At least 2 detectors by house.
• At least 1 detector by floor.
• Separator hallway outside the open bedrooms.
• Bedrooms normally closed.
• On the roof before a stair.
• Living room, dinner room, attic, etc.

HOME GAS DETECTOR

Autonomous gas detector with acoustic alarm, capable of activate a gas


shut off to avoid danger.

Supply 220V AC with battery of 9V


Sensibility 10% LEL
Consumption in alarm ≤1,7 W
Consumption in standby ≤0,5 W
Temperature -10ºC~50ºC
Humidity <95% HR
Acoustic level 85 dB / 3m
Gas type detected:
1. LPG (Butane, Propane) used in standard and little bottles .
2. City gas and natural gas.
Installation: See installation notes of the Keeper diagram.

GAS SHUT OFF ACTUATOR

Electromecanic valve for automatic shut off of the gas supply.

Size 100 x 90 x 70 mm
Nominal voltage 12 Vdc
Operating voltage 8Vdc - 16Vdc
Operating power 0,24W - 4,5W - 10W
Consumption 20mA - 350mA - 1000mA
Torque 10 - 30 - 40 Kg/cm
Temperature 10ºC ~ -50ºC
Humidity <95% RH

www.cofem.com
[email protected]

You might also like