Scribd
Upload
127 views1 page

Partition 4 With Details

The document details construction materials and methods for partition walls, including a 150mm thick brick wall with plaster, 25mm thick blockboard used for doors with walnut veneer finishes. It specifies the use of timber battens and drywall screws for vertical framing, as well as 6mm thick toughened glass, plywood, laminate, and glass wool for acoustic treatment. Metal channels are provided for concealed door closers.

Uploaded by

RONAK RATHOD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views1 page

Partition 4 With Details

The document details construction materials and methods for partition walls, including a 150mm thick brick wall with plaster, 25mm thick blockboard used for doors with walnut veneer finishes. It specifies the use of timber battens and drywall screws for vertical framing, as well as 6mm thick toughened glass, plywood, laminate, and glass wool for acoustic treatment. Metal channels are provided for concealed door closers.

Uploaded by

RONAK RATHOD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

25MM THK BLOCKBOARD

RCC SLAB
USED FOR DOOR AND
FINISHED WITH 4MM THK
150 MM THK BRICK WALL WALNUT VENEER
WITH 12 MM THK PLASTER
RAUL PLUG 50X50 MM THK T.W. BATTENS BRASS T PATTI
USED AS VERTICAL FRAMING
SS BLACK OXIDE COATED MEMBERS FOR THE
DRYWALL SCREW PARTITION
LED STRIP LIGHT
19 MM FULL THREAD
L ANGLE SCREW
G.I Intermediate Channel 6MM THK TOUGHENED SS BLACK OXIDE COATED
25X50X25 MM​ GLASS USED AS WINDOW DRYWALL SCREW
G.I. Ceiling Section
80X25X50 MM ACOUSTICALLY TREATED
12 MM THK GYPSUM SHEET WITH GLASS WOOL
BY GYPROC FINISHED WITH 6 MM THK PLY
2 MM THK PUTTY &LUSTER FINISHED WITH
PAINT 2 MM THK LAMINATE
1 MM THK MASKING TAPE DETAIL OF B' HAFELE TELESCOPIC
DETAIL OF FALSEING FOR JOINT CHANNEL
6MM THK TOUGHENED GLASS
USED AS WINDOW
50X50 MM THK T.W. BATTENS
USED AS VERTICAL FRAMING 6 MM RUBBER GAS KIT AND 12
MEMBERS FOR THE MM THK BEADING PATTI
PARTITION FINSIHED IN PU POLISH
HAFELE CONCELED DOOR
ACOUSTICALLY TREATED WITH
50X50 MM THK T.W. BATTENS CLOSER
GLASS WOOL
USED AS VERTICAL FRAMING
SS BLACK OXIDE COATED MEMBERS FOR THE
DRYWALL SCREW PARTITION

LED STRIP LIGHT ACOUSTICALLY TREATED WITH


GLASS WOOL HAFELE CONCELED DOOR
6 MM THK PLY CLOSER
FINISHED WITH 6 MM THK PLY
2 MM THK LAMINATE FINISHED WITH
2 MM THK LAMINATE
DETAIL OF D'
DETAIL OF C'

50X50 MM THK T.W. BATTENS


50X50 MM THK T.W. BATTENS
USED AS VERTIAL FRAMING EXECUTIVE TABLE
USED AS VERTICAL FRAMING
MEMBERS FOR THE
MEMBERS FOR THE
PARTITION
PARTITION
NOTE:

-ALL MEASUREMENT ARE IN MM.


50X50 MM THK T.W. BATTENS -WRITTEN DIMENSIONS TO BE FOLLOWED
USED AS HORIZONTAL 50X50 MM THK T.W. BATTENS
-DRAWING SHOULD NOTE BE SCALED
FRAMING MEMBERS FOR THE USED AS HORIZONTAL
-DO NOT ASSUME DATE UNLESS SPECIFIED
PARTITION FRAMING MEMBERS FOR THE
PARTITION SIGNATURE DWG .NO. DATE

SCALE

CROSS LAP JOINERY T LAP JOINERY


NAME - RONAK P. RATHOD

CLASS -T.Y.G.P.T ROLL NO.-

L.S. RAHEJA SCHOOL OF ARCHITECTURE

You might also like