Scribd
Upload
129 views2 pages

Rechargeable Lithium-Ion Battery: High Performance Medium Prismatic Cell

This document summarizes the specifications and benefits of the Saft MP 144350 rechargeable lithium-ion battery. It has a nominal voltage of 3.75V and capacity of 2.6Ah. It provides high energy density and extended autonomy for mobile applications. It has excellent performance over a wide operating temperature range and long cycle life, retaining over 80% of its initial capacity after 500 cycles. Its integrated protection circuits ensure safety.

Uploaded by

Francisco Tejero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views2 pages

Rechargeable Lithium-Ion Battery: High Performance Medium Prismatic Cell

This document summarizes the specifications and benefits of the Saft MP 144350 rechargeable lithium-ion battery. It has a nominal voltage of 3.75V and capacity of 2.6Ah. It provides high energy density and extended autonomy for mobile applications. It has excellent performance over a wide operating temperature range and long cycle life, retaining over 80% of its initial capacity after 500 cycles. Its integrated protection circuits ensure safety.

Uploaded by

Francisco Tejero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Rechargeable lithium-ion battery

MP 144350

High performance
Medium Prismatic cell
Saft always supplies MP cells
in assemblies or as customized
battery system constructions

Benefits Electrical characteristics


l 
Extended autonomy and life for Nominal voltage 3.75 V
(0.5 A rate at 20°C)
mobile systems
l A broad operating temperature Typical capacity 2.6 Ah
(at 0.5 A 20°C 2.5 V cut-off)
range
l 
Recommended for ruggedized Nominal energy 9.75 Wh
designs Mechanical characteristics (Sleeved 100 % charged cell)
l 
Easy integration into compact
Thickness 14.9 mm
and light systems (Thickness tends to increase with cycling,
l 
Very high energy density typically obtained after 500 cycles. Consult Saft)
(344 Wh/l and 143 Wh/kg) (At beginning of life 14.6 mm)
l 
Unrivalled low temperature Width (max) 43.9 mm
performance Height (max) 54.5 mm
Typical weight 68 g
Key features
Lithium equivalent content 0.78 g
l 
Excellentcharge recovery after
Volume 28 cm3
long storage, even at high
temperature Operating conditions
l 
Maintenance-free Charge method Constant Current/Constant Voltage
l 
Long cycle life
Charge voltage 4.20 +/– 0.05 V
(over 80 % initial capacity after
Maximum recommended charge current** 2.6 A (C rate)
500 cycles at 100 % DoD)
l 
Non-restricted for transport/ Charge temperature range* – 20°C to + 60°C
Non-assigned to Class 9 Charge time at 20°C To be set as a function of the charge current:
according to the UN C rate ➡ 2 to 3 h
Recommendations on the C/2 rate ➡ 3 to 4 h
transport of dangerous goods - C/5 rate ➡ 6 to 7 h
Model Regulations Maximum continuous discharge current** 5.0 A (~2C rate)
l 
Underwriters Laboratories (UL) Pulse discharge current up to 10 A (~4C rate)
Component Recognition
Discharge cut-off voltage 2.5 V
(File Number MH 12609)
Discharge temperature range* – 50°C to + 60°C

Main applications * For optimized charging below 0°C, 60°C and discharging at – 50°C, consult Saft.
** Electronic protection circuits within battery packs may limit the maximum
l 
Mobile asset tracking charge/discharge current allowable. Consult Saft.
l 
Small UPS
l Soldier of the future equipment

l 
Portable radios
l 
Professional portable lighting
l 
Bar code readers
l Portable payment terminal

October 2009
MP 144350 Capacity versus current at + 20°C

Battery assembly
In order to operate properly, individual Li-ion cells

Voltage (V)
are mechanically and electrically integrated in battery
assemblies specific to each application. The battery
assembly incorporates electronics for performance,
thermal and safety management.
Technology
l Graphite-based anode
l Lithium Cobalt oxide-based cathode
l Electrolyte: organic solvents
l 
Built-in redundant safety protections Capacity (Ah)
(shutdown separator, circuit breaker, safety vent)
l 
Batteries assembled from MP cells feature an
Typical discharge profiles (0.5 A - C/5 rate)
electronic protection circuit
Electrolyte
filling hole Positive terminal

Safety vent
Cover (stainless steel) Voltage (V)

Circuit breaker
Insulator

Separator
Can (stainless steel)

Jelly roll
Negative terminal
Capacity (Ah)

Built-in protection devices ensure safety in case of:


Charge characteristics to 4.2 V at + 20°C
l Exposure to heat
l 
Exposure to direct sunlight for extended periods of time
l Short circuit
Voltage (V) / Current (A)

l Overcharge

State of charge (%)


l Overdischarge

When handling Saft MP batteries:


l Do not solder directly to cell terminal
l Do not disassemble
l Do not remove the protection circuit
l Do not incinerate

Transportation and storage:


l 
Store in a dry place at a temperature preferably not
exceeding 30°C
l 
For long-term storage, keep the battery within a
(30 ± 15) % state of charge Charge time (hours)

Saft
Specialty Battery Group
12, rue Sadi Carnot
93170 Bagnolet - France
Tel. : +33 (0)1 49 93 19 18
Fax : +33 (0)1 49 93 19 69 Doc. No 54044-2-1009
Information in this document is subject to change without notice
313, Crescent Street and becomes contractual only after written confirmation by Saft.

Valdese, NC 28690 - USA Published by the Communications Department.


Tel. : +1 (828) 874 41 11 Photo credit: Saft.
Fax : +1 (828) 879 39 81 Société anonyme au capital de 31 944 000€
RCS Bobigny B 383 703 873
www.saftbatteries.com Produced by Arthur Associates Limited.

You might also like