Scribd
Upload
283 views5 pages

SPR, RCS-9627CN, No

1. A circuit breaker panel was tested for its measurement and protection functions. Measurements of currents and voltages matched the injected values to within 1%. 2. Differential protection and overcurrent protection were tested at various settings and stages. All operated within specifications. 3. Negative phase sequence and overload protections were also tested at various settings. All operated within specifications.

Uploaded by

Amaresh Nayak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
283 views5 pages

SPR, RCS-9627CN, No

1. A circuit breaker panel was tested for its measurement and protection functions. Measurements of currents and voltages matched the injected values to within 1%. 2. Differential protection and overcurrent protection were tested at various settings and stages. All operated within specifications. 3. Negative phase sequence and overload protections were also tested at various settings. All operated within specifications.

Uploaded by

Amaresh Nayak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Date:11-11-2018

1.0 Name Plate Details:


Location : 11 KV Switch Board
Make. : NR
Panel Name & No : SPARE
Model No : RCS9627 CN
SL No : --------
CT Ratio : 300/1A & 300/1A
CBCT RATIO : 100/5A
PT Ratio : 11 KV/110V

2.0 Measurement Function Check: -

CT MEASUREMENT
Injected current(A) Injected current(A) Measurement Measurement
Phase
side-1 side-2 current(A) side-1 current(A) side-1
R 5 5 4.99 4.99
Y 5 5 4.98 4.99
B 5 5 4.99 4.98

CBCT MEASUREMENT
Phase Injected current(A) Measurement current(A)
N 5 5.02

PT MEASUREMENT
Phase Injected Voltage(V) Measurement Voltage (VPN)
R 63.51 63.47
Y 63.51 63.48
B 63.51 63.47

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
1
Date:11-11-2018

3.0 DIFFERENTIAL PROTECTION

3.1 Pickup Test HV side: SET CURRENT: - 0.2A

Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 0.2 0.198 65

3.2 Pickup Test LV side: SET CURRENT: - 0.2A

Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 0.2 0.198 63

3.3 Stability Test:

Injected current(A) Injected current(A)


Phase Id Value Ib Value Relay Status
side-1 side-2
R 1∠0⁰ 1∠180⁰
Y 1∠-120⁰ 1∠60⁰ 0.0 1 Stable
B 1∠+120⁰ 1∠360⁰
R 1∠0⁰ 1∠0⁰
Y 1∠-120⁰ 1∠-120⁰ 9.96 1 Tripped
B 1∠+120⁰ 1∠+120⁰

3.4 Slope Test:

0.5*In Set Slope=0.40


Injected current(A) Injected current(A)
Phase Id1 Ib1 Relay Status
side-1 side-2
R 0.5∠0⁰ 0.696∠180⁰
Y 0.5∠-120⁰ 0.696∠60⁰ 0.193 0.605 Relay Operated
B 0.5∠+120⁰ 0.696∠300⁰

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
2
Date:11-11-2018

1*In
Injected current(A) Injected current(A)
Phase Id2 Ib2 Relay Status
side-1 side-2
R 1∠0⁰ 2.139∠180⁰
Y 1∠-120⁰ 2.139∠60⁰ 0.44 1.23 Relay Operated
B 1∠+120⁰ 2.139∠300⁰

SLOPE =Id2-Id1/Ib2-Ib1 = (0.44-0.193) / (1.23-0.605)


=39.48%

3.5 Differential High Stage:


SET CURRENT: -2.6 A
Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 2.6 2.6 49

4.0 Over Current:


Stage: -1 SET CURRENT: - 15A SET TIME: - 0.1 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 6.5 6.5 0.1 0.14
Y 6.5 6.5 0.1 0.14
B 6.5 6.5 0.1 0.14

Stage: -2 SET CURRENT: - 10A SET TIME: - 0.3 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (m Sec)
R 10 10 0.3 0.321
Y 10 10 0.3 0.321
B 10 10 0.3 0.321

Stage: -3 SET CURRENT: - 5A SET TIME: - 15 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 5 5 15 15.04
Y 5 5 15 15.04
B 5 5 15 15.04

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
3
Date:11-11-2018

5.0 Negative Phase Sequence:


Stage: -1 SET CURRENT: - 2A SET TIME: - 0.1 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 2 2 0.1 0.131
Y 2 2 0.1 0.131
B 2 2 0.1 0.131

Stage: -2 SET CURRENT: - 1A SET TIME: - 0.5 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 1 1 0.5 0.549
Y 1 1 0.5 0.549
B 1 1 0.5 0.549

6.0 Over Load Current:


SET CURRENT: - 3A SET TIME: - 15 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 3 3 15 15.05
Y 3 3 15 15.05
B 3 3 15 15.05

7.0 Thermal Overload:


SET CURRENT: - 6A
Phase Set Current (A) Injected Current (A) Alarm Opt. Time (Sec)
R 6 6 80% 3.03
Y 6 6 80% 3.03
B 6 6 80% 3.03

8.0 Residual Over Current:


SET CURRENT: - 3A SET TIME: - 50 m Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (m Sec)
N 3 3 0.05 85

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
4
Date:11-11-2018

9.0 Under Voltage:


SET VOLTAGE: - 50V SET TIME: - 9.0 Sec
Phase Set Voltage (VPP) Injected Voltage (VPN) Set time (Sec) Opt. Time (Sec)
R 50 28.5 9 9.03
Y 50 28.5 9 9.03
B 50 28.5 9 9.03

10. Remarks: -

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
5

You might also like