इंटरनेट मानक

Disclosure to Promote the Right To Information

Whereas the Parliament of India has set out to provide a practical regime of right to
information for citizens to secure access to information under the control of public authorities,
in order to promote transparency and accountability in the working of every public authority,
and whereas the attached publication of the Bureau of Indian Standards is of particular interest
to the public, particularly disadvantaged communities and those engaged in the pursuit of
education and knowledge, the attached public safety standard is made available to promote the
timely dissemination of this information in an accurate manner to the public.

“जान1 का अ+धकार, जी1 का अ+धकार” “प0रा1 को छोड न' 5 तरफ”

Mazdoor Kisan Shakti Sangathan Jawaharlal Nehru
“The Right to Information, The Right to Live” “Step Out From the Old to the New”

IS 1366 (2002): Slotted Cheese Head Screws - Product Grade

A [PGD 31: Bolts, Nuts and Fasteners Accessories]

“!ान $ एक न' भारत का +नम-ण”

Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”

“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता ह”

है”
ह
Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
 IS 1366:2002
ISO 1207:1992

mm

Wif%amv?fh$h-wnakq

( G%?m jpffm )

Indian Standard
SLOTTED CHEESE HEAD SCREWS—PRODUCT
GRADE A
(Third Revision )

Ics 21.060.10

@ BIS 2002

BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002

December 2002 Price Group 2

/ 1’
Bolts, Nuts and Fasteners Accessories Sectional Committee, BP 33

NATIONAL FOREWORD

This Indian Standard (Third Revision) which is identical with ISO 1207:1992 ‘slotted cheese head
screws — Product grade A’ issued by the International Organization for Standardization (ISO) was adopted
by the Bureau of Indian Standards on the recommendation of the Bolts, Nuts and Fasteners Accessories
Sectional Committee and approval of the Basic and Production Engineering Division Council.

This standard was originally published in 1962 and subsequently revised in 1968 and 1982.This revision
of the standard has been taken up to align it with ISO 1207:1992 by adoption under dual numbering
system.

The text of ISO Standard has been approved as suitable for publication as Indian Standard without
deviations. Certain terminology and conventions are, however, not identical to those used in the Indian
Standards. Attention is drawn especially to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should
be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice
is to use a point (.) as the decimal marker.

In this adopted standard, reference appears to certain International Standards for which Indian Standards
also exist. The corresponding Indian Standards which are to be substituted in their place are listed below
along with their degree of equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree of

Equivalence

ISO 225:1983 IS 8536:1987 Fasteners — Bolts, screws, studs and Identical

,nuts — Symbols and designation of dimensions (first
revision)

ISO 261 :1973’) IS 4218 (Part 2):2001 ISO General purpose metric do
screw threads: Part 2 General plan (second revision)

1s0 888: 976 IS 4206:1987 Dimensions for nominal lengths and do

thread lengths for bolts, screws and studs (first
revision)

ISO 898- : 19882) IS 1367 (Part 3):2002 Technical supply conditions for do
threaded steel fasteners: Part 3 Mechanical properties
of fasteners made of carbon steel and alloy steel —
Bolts, screws and studs (fourth revision)

ISO 965-2:1 9801) IS 14962 (Part 2):2001 ISO General purpose metric
screw threads — Tolerances: Part 2 Limits of sizes for do
general purposes external and internal screw threads
medium quality

ISO 3269:1988 IS 1367 (Part 17):1 996 Industrial fasteners—

Threaded steel fasteners—Technical supply do
conditions : Part 17 Inspection, sampling and
acceptance procedure (third revision)

(Continued on third cover)

1, Since revised in 1998.

2, Since revised in 1999.
 IS 1366:2002
ISO 1207:1992 ,,

Indian Standard
SLOTTED CHEESE HEAD SCREWS—PRODUCT
GRADE A
( Third Revision) ‘,

1 Scope

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and
with threads from MI,6 to MIO inclusive.

If, in special cases, specifications others than those listed in this International Standard are required, they
should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2,
ISO 3506, ISO 4759-1.

2 Normative references

The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard, At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below, Members of IEC and ISO
maintain registers of currently valid International Standards,

ISO 225:1983, Fasteners — Bolts, screws, studs and nuts – Symbols and designations of dimensions.

ISO 261:1973, /S0 general purpose metric screw threads – General plan
,
ISO 888:1976, Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts.

ISO 898-1:1988, Mechanical properties of fasteners – Part 1: Bolts, screws and studs,

ISO 965-2:1980, /S0 general purpose metric screw threads – Tolerances -– Part 2: Limits of sizes for general
purpose bolt and nut threads – Medium quality.

ISO 326!3:1988, Fasteners — Acceptance inspection.

ISO 3506:1979, Corrosion-resistqnt stainless steel fasteners – Specifications.

ISO 4042:1989, Threaded components – Electroplated coatings.

ISO 4759-1:1978, Tolerances for fasteners – Part 1: Bolts, screws and nuts with thread diameters between 1,6
(inclusive) and 150 mm (inclusive) and product grades A, B and C.

ISO 6157-1:1988, Fasteners — Surface discontinuities – Part f: Bolts, screws and studs for general
requirements.

ISO 6157-3:1988, Fasteners – Surface discontinuities – Part 3: Bolts, screws and studs for special
requirements,

ISO 8839:1986, Mechanica/ properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals.

ISO 8992:1986, Fasteners – General requirements for bolts, screws, studs and nuts

I I
IS 1366:2002
ISO 1207:1992

3 Dimensions

See figure 1 and table 1.

The shank diameter is approximately equal to the pitch diameter or equal to the major thread diameter per-
missible.

NOTE 1 The symbols and specifications for dimensions are specified in ISO 225.

~ Edgemqber..nded.r flat As-rolledend

—.
E —.— .—. — .—. — .—. — —

x b

--l---H
t
I 1 .

k
I 1 ----4
Figure 1

:.. ----’

\
 IS 1366:2002
ISO 1207:1992

Table 1
Dimensions
in millimafras
Thraad (d) M1,6 M2 M2,6 M3 (M3,5)’) M4 MS km Me M1O
pa 0,36 0,4 0,45 0,5 0,6 0,7 0,8 1 1,26 1,5

a max. 0,7 0,8 0,9 1 1,2 1,4 1,6 2 2,5 3

b miri B 26 % 26 38 38 36 36 36 ,06
nom.. max. 3,00 3,60 4,50 5,50 6P3 7.00 6s50 10,00 13,00 16,00
dk
min. 2,66 3,62 4,32 5,32 5,82 6,76 8,28 9,78 12,73 15,73
da max. 2 2,6 3,1 3,6 4,1 4,7 5,7 6,8 9,2 11,2
nom.- max. 1,10 1,40 1,60 2,00 2,40 2.60 3,33 3s9 5,0 6,0
k
min. 0,86 1,26 1,66 1& 2,26 2,46 3,12 3,6 4,7 5,7 {
nom. 0,4 0,5 0,6 0,8 1 1,2 1,2 1,6 2 2,5
n max. 0,60 0,70 0,60 1,00 1,20 1,51 1,51 1,91 2,31 2,81
min. 0,46 0,66 0,66 0,6s 1,06 1,= 128 10= 206 256
r min. 0,1 0,1 0,1 0,1 0,1 0,2 0,2 0,25 0,4 0,4

t min. 0,45 0,6 087 0,85 1 1,1 1,3 1,6 2 2,4

w min. 0,4 0,5 0,7 0,75 1 1,1 1,3 1,6 2 2,4

x max. 0,9 1 1,1 1,25 1,5 1,75 2 2,5 3,2 3,8

I p) I ADDroximete
mess,in kilogramsper1000 pieces(e = 7$5 ka/dm3) I
nam.’) min. max. (forinformation
anlv)

2 1,8 2,2 0,07

3 2,8 3,2 0,062 0,16 0,272

4 3,76 . 4,24 0,084 0,179 0,302 0,515

5 4,76 5,24 0,105 0,186 0,332 0,56 0,786 1,08

6 5,76 6,24 0,117 0,217 0,362 0,604 0,645 1,17 2,06

8 7,71 8,29 0,14 0,254 0,422 0,692 0,866 1,33 2,3 3,56

10 9,71 10,29 0,163 0,281 0,462 0,78 1,06 1,47 2,55 3,92 7,85

12 11,65 12,35 0,166 0,328 0,542 0,666 1,2 1,63 2,8 4,27 8,49 14,6

(14) 13,65 14,35 0,208 0,365 0,602 0,956 1,32 1,79 3,05 4,62 9,13 15,6

16 15,65 16,35 0,232 0,402 0,662 1,04 1,44 1,95 3,3 4,86 9,77 16,6

20 19,56 20,42 0,478 0,762 1,22 1,66 2,25 3,78 5,69 11 18,6

2s 24,58 25,42 0,932 1,44 1,98 2,64 4,4 6,56 12,6 21,1

30 28,56 30,42 1,66 2,28 3,02 5,02 7,45 14,2 23,6

—--- ———
36 34,5 35,5 ‘–– ‘—– 1, 2,57 3,41 5,62 8,25 15,8 26,1

40 39,5 40,5 I 3,8 6,25 9,2 17,4 28,6

--- -——. ——- ——— —--— —--
45 44,5 45,5 6,66 10 18,9 31,1

60 49,5 60,5 7,5 10,9 20,6 33,6

(55) 54,05 55,95 11,8 22,1 36,1

60 59,05 60,95 12,7 23,7 36,6

(65) 64,05 65,95 25,2 41,1

70 69,05 70,95 26,8 43,6

(75) 74,05 75,95 26,3 46,1

66 78,05 60,95 28,8 46,6

NOTE - Popularlengthsarethosebetweenthestepped,continuous,
boldlines.
1) sizesinparentheses shouldbeavoidedifpossible.
2) P = pitchofthethread
3) Screws withnominallengthsabova the bolddottedline are threaded uptothahead(b = f - a).

//
1’
 r“,
—

IS 1366:2002
.,..
ISO 1207:1992 “~

4 Specifications and reference international Standards

See table 2.

Non-ferrous
Matarial Steel Stainless steel
metal

General requirements International Standard ISO 8992

Tolerance 6g
rhread
International Standards ISO 261, ISO 965-2

Property clask 4.8, 5.8 A2-70, A2-50 . . .

Mechanical properties
International Standards ISO 898-1 1s03506 ISO 8839

Product grade A
Tolerances
International Standard 1s0 4759-1
.—
Plain

Requirements for electroplating are covered in ISO 4042.

If different electroplating requirements are desired or if

Finish requirements are needed for other finishes, they should be
agreed between customer and supplier.

Limits for surface discontinuities are covered in ISO 6157-1

and ISO 6157-3.

Acceptability Acceptance procedure is covered in ISO 3269.

5 Designation

Example for the designation of a slotted cheese head screw with thread M5, nominal length 1=20 mm and
property class 4.6:

Cheese head screw ISO 1207- M5 x 20- 4.8

4
(Continued from second cover)

/nternationa/ Standard Corresponding Indian Standard Degree of

Equivalence

ISO 3506:1 979’) IS 1367 (Part 14/See 1):2002 Technical supply Identical
conditions for threaded steel fasteners i Part 14
Mechanical properties of corrosion-resistant stainless-
steel fasteners, Section 1 Bolts, screws and studs
(third revision)

ISO 4042:1 9892) IS 1367 (Part 11):2002 Technical supply conditions for do
threaded steel fasteners : Part 11 Electroplated
coatings (third revision)

ISO 4759-1:1 9783) IS 1367 (Part 2):2002 Technical supply conditions for do
threaded steel fasteners: Part 2 Product grades and
tolerances (third revision)

ISO 6157-1:1988 IS 1367 (Part 9/See 1):1993 Technical supply do

conditions for threaded steel fasteners: Part 9 Surface
discontinuities, Section 1 Bolts, screws and studs for
general applications (third revision)

ISO 6157-3:1988 IS 1369 (Part 9/See 2):1993 Technical supply do

conditions for threaded steel fasteners: Part 9 Surface
discontinuities, Section 2 Bolts, screws and studs for
special applications (third revision)

ISO 8992:1986 IS 1367 (Part 1):2002 Technical supply conditions for do

threaded steel fasteners : Part 1 Introduction and
general information (third revision)

The concerned Technical Committee has reviewed the provisions of following ISO Standard referred in
this adopted standard and has decided that it is acceptable for use in conjunction with this standard:

ISO Standard Title

ISO 8839:1986 Mechanical properties of fasteners — Bolts, screws, studs and nuts made of
non-ferrous metals,

BIS CERTIFICATION MARKING

Details available with the Bureau of Indian Standards.

For the purpose of deciding whether a particular requirement of this standard is complied with, the final
value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance
with IS 2:1960 ‘Rules for rounding off numerical values (reviseo’)’.The number of significant places retained
in the rounded off value should be the same as that of the specified value in this standard.

1) since [evi~ed in 1997,

z) since revised in 1999.
3) sin~~ ~~vi~~d in 2000.
Bureau of Indian Standards

61S is a statutory institution established under the Bureau of Indian Standards Act, 1986 to promote
harmonious development of the activities of standardization, marking and quality certification of
goods and attending to connected matters in the country.

Copyright

61S has the copyright of all its publications. No part of these publications may be reproduced in any
form without the prior permission in writing of 61S. This does not preclude the free use, in the course
of implementing the standard, of necessary details, such as symbols and sizes, type or grade
designations. Enquiries relating to copyright be addressed to the Director (Publication), BIS.

Review of Indian Standards

Amendments are issued to standards as the need arises on the basis of comments. Standards are also
reviewed periodically; a standard along with amendments is reaffirmed when such review indicates that
no changes are needed; if the review indicates that changes are needed, it is taken up for revision.
Users of Indian Standards should ascertain that they are in possession of the latest amendments or
edition by referring to the latest issue of ‘BIS Catalogue’ and ‘Standards: Monthly Additions’.

This Indian Standard has been developed from Dot: No. BP 33 (0258).
I
.

Amendments Issued Since Publication

I

Amend No. Date of Issue Text Affected

BUREAU OF INDIAN STANDARDS

Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002 Telegrams: Manaksanstha
Telephones: 3230131, 3233375,3239402 (Common to all offices)

Regional Offices: Telephone

Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg 3237617,3233841

NEW DELHI 110002
Eastern : 1/1 4 C.I.T. Scheme Vil M, V.I.P. Road, Kankurgachi 3378499,3378561
KOLKATA 700054 { 3378626,3379120

Northern : SCO 335-336, Sector 34-A, CHANDIGARH 160022 603843

{ 602025
Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 2541216,2541442 ‘,,

( 2542519,2541315
Western : Manakalaya, E9 MlDC, Marol, Andheri (East) 8329295,8327858
MUMBAI 400093 { 8327891,8327892

Branches : AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FARIDABAD.

GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. KANPUR. LUCKNOW. NAGPUR.
NALAGARH. PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM. VISAKHAPATNAM.

Printedat SimcoPrintingPress, Delhi

i’!