HOSE INDEX

HYDRAULIC HOSES
SELECTION GUIDE
Click on Hose Codes to Be Linked to That Page
Page Group Product Codes Construction Normal Usage Features & Benefits
(See main Specification pages for details and Approvals)

R4HT / IROFSD Hydraulic suction & delivery hose for fuels & Synthetic smooth oil resistant inner tube. 2
6-7 Oil Fuel Suction mineral oils with aromatic content ≤ 40% braids of textile & a metal spiral. MSHA

IRFWSDH Hardwall FRAS hose for arduous air / water Electrically conductive NBR liner and CR
8 FRAS Suction/Delivery applications in u/ground coal mining cover meeting AS2660 requirements
MPH High quality black multi-purpose hose with Synthetic black rubber inner and outer.
9 Multipurpose spiral wound textile reinforcement Abrasion and weather resistant. Oil resistant
IRFAW Softwall hose for arduous air/water Weather resistant black cover with orange
10 FRAS Air / Water applications in underground mining spiral. Fire resistant / anti static rating
LPHT Low pressure hydraulic fluids, aqueous Low pressure high temp. hose with oil
11 Textile braid Hi-Temp emulsions, air transfer and water resistant liner suited to push fit fittings

R5HT Medium pressure air and hydraulic hose Internal diameters match the inside diameter
12 Hi-Temp. Truck Hose common on American equipment of copper tube to yield an unrestricted flow

HTAB/HTFH Specifically intended for trucking industry Black rubber with poyester textile outer
13 Engine & Air Brake applications involving diesel fuel / air brakes cover for safe escape of entrapped air

JW250 / JW400 Flexible high pressure compact hose for 250 bar versions with 1-wire braid, 400 bar
15-16 Jet Wash Hose pressure cleaning with water and detergents version with 2-wire braid
R1AT / R1ATFS Medium pressure hose for hydraulic fluids Normally black but R1ATFS has red cover to
17-18 One wire braid and aqueous emulsions and water indicate use in fire suppression systems
HT1 Medium pressure hose for hydraulic fluids, Similar to R1AT but has increased flexibility,
19 One wire braid aqueous emulsions, water and air high temperature and also conveys air
R2AT/2SC High pressure hose for hydraulic fluids and Synthetic rubber oil resistant liner and
20 Two wire braid aqueous emulsions and water abrasion resistant cover. 2 steel braids
R2ATHT High pressure hose for hydraulic fluids and As above but high temperature rubber
21
HYDRAULIC

High Temp. 2 wire hose aqueous emulsions and water formulation. Blue cover
HT2 High pressure hose for hydraulic fluids, Similar to R2AT but has increased flexibility,
22 Two wire braid aqueous emulsions, water and air high temperature and also conveys air

JH70 High pressure hydraulic hose for jacking Synthetic rubber oil resistant liner and
23 Jacking Hose applications abrasion resistant cover. 2 steel braids

C21
24 Isobaric 210 bar Class 21 hoses suit 210 bar WP
Isobaric (constant working pressure for all
C25, PC25 sizes) range of hoses exclusive to Pirtek.
25, 29 Isobaric 250 bar
Class 25 hoses suit 250 bar WP
Simplifies hose selection in circuits of known
Class 28 hoses suit 275 bar WP
PC28PS working pressure
26 Isobaric 280 bar Class 35 hoses suit 350 bar WP
‘PS’ Suffix denotes extreme abrasion
C35, PC35
27, 30 Isobaric 350 bar
resistant sheath over the cover
Class 42 hoses suit 420 bar WP
‘PC’ Prefix denotes Komatsu® genuine hoses
C42, C42EH, PC42 Class 45 hoses suit 450 bar WP
28, 31 Isobaric 420 bar
C45 Large bore medium pressure hose for Spiral construction. Prolonged usage with
32 Isobaric 450 bar hydraulic fluids incl. aqueous emulsions water based fluids will corrode reinforcement

JBF High pressure hose for transfer of LPG, Woven black poly cover with blue trace over
33 Large Bore Hose butane-propane on stationary and mobile eqpm’t. single st. steel braid / teflon liner. AGA approved.

LPG High pressure hose for transfer of LPG, Woven black poly cover with blue trace over
34 LP Gas Hose butane-propane on stationary and mobile eqpm’t. single st. steel braid / teflon liner. AGA approved.

R13C High pressure multi-spiral hose for hydraulic

35 5000psi Spiral fluids such as glycol, mineral oils, fuels,
Compatible with Caterpillar® reusable fittings
hydrocarbons etc.
R12C
36 4000-2500 psi Spiral
Provide flexibility and high temperature
resistance

This page is part of a complete catalogue containing technical and safety data. 1
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
Rev. U B
 HOSE INDEX
HYDRAULIC HOSES

SELECTION GUIDE
Click on Hose Codes to Be Linked to That Page
Page Group Product Codes Construction Normal Usage Features & Benefits
(See main Specification pages for details and Approvals)

37 PE2 Extreamely high pressure compact hose Synthetic rubber oil resistant liner
HYDRAULIC

for hydraulic fluids, aqueous emulsions, & abrasion resistant cover.

Two wire braid hybrid air & water Excellent flexability.

38 Extreamely high pressure with half bend

Synthetic rubber oil resistant liner
PE4_6 radius of R13/R15 hose.
& abrasion resistant cover.
350 Bar & 420 Bar Spiral hose For hydraulic fluids, aqueous emulsions,
Excellent flexability.
air & water

39 WB SERIES Very high constant pressure hose for water

scaling systems. Suitable for passage of
2.5 : 1 safety factor. Do not use in hydraulic
Water Blast Hoses water and aqueous solutions
systems

40 TPHC Cut fabric braid rubber & thermoplastic

MISC.

Hand Cutter hose.

41 PSH
Power steering hose Ideal for use on modern cars to eliminate vibration
& harmonics

42 30CT Flexible in cold temperatures (coldrooms).

Small OD and good over sheaves
Constant 207 bar working pressure for all sizes.
Perforated cover for gaseous applications
Cold temp. hose
THERMOPLASTIC

43 3JET Medium pressure hose for water jetting

and drain cleaning. Low elongation
Constant 207 bar working pressure for all sizes.
Perforated cover for gaseous applications
Water jetting hose

44 30CTX2 / 30CTX3 Commonly found in forklift applications in

cold rooms
Constant 207 bar working pressure for all sizes.
Hytrel core tube and perforated cover. 2 or 3 line
Multi-Line hose
45 3130
General hydraulics, material handling,
pneumatics, and agricultural equipment
The original SAE 100R7 design with nylon
tube and urethane cover. Economical
General purpose R7

46 3360X2 Similar to 30CT except with nylon core

tube
As for 30CT but with nylon tube and a wider
range of sizes
Twin forklift hose
47 37AL Non conductive hydraulic hose for aerial lift
equipment
Polyester core and good cold weather
flexibility. SAE 100R7 performance
R7 non-conductive
48 37ALX2 Non conductive twin line hydraulic hose for
aerial lift equipment
Polyester core and good cold weather
flexibility. SAE 100R7 performance
Twinline non-conductive
49 3800 Pilot lines, general hydraulics, and machine Compact dimensions due to aramid fibre
Compact R8 tools at higher pressures than 100R7 reinforcement - suits 100R7 fittings

50 3E80 Non conductive hydraulic hose for aerial lift Dimensionally as for 3R80 hose. Nylon core
Non-conductive R8 equipment with higher working pressures and orange urethane cover

51 3R80 General hydraulics, material handling, The original 100R8 with nylon core and
General purpose R8 forestry and construction urethane cover. Long impulse / flex life

52 3VE0 Extreme pressure hose for high pressure

jacks and rescue equipment
Orange cover signifies electrically non
conductive hose
High Pressure Jacking
53 TP1W Low temperature hydraulic & gas hose.
Recommended for mobile equipment
Good cold weather and cold room flexability
Good bend radius and kink resistance
One Wire Thermoplastic

54 TP2W High pressure hydraulic oils Polyols, Good chemical compatability - Nylon liner.
Good bend radius and kink resistance
Two Wire Thermoplastic Solvents, Paints/airless paint spray

55 TPSCO For water applications in the high Low volumetric expansion, good bend
radius for hose reels and into pipes
Sewer Cleaning Hose pressure cleaning field

56 TPR7 General hydraulics, material handling,

pneumatics, and agricultural equipment
The original SAE 100R7 design with nylon
tube and urethane cover. Economical
General Purpose R7
57 TPR7NC Non conductive hydraulic hose for aerial lift
equipment.
Polyester core and good cold weather
flexibility. SAE 100R7 performance
Non-Conductive R7
2 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
HOSE INDEX

HYDRAULIC HOSES
SELECTION GUIDE
Click on Hose Codes to Be Linked to That Page
Page Group Product Codes Construction Normal Usage Features & Benefits
(See main Specification pages for details and Approvals)

58 TPR8 Pilot lines, general hydraulics, and machine

R8 Performance with compact R7 dimensions
High Pressure R8 tools at higher pressures than 100R7

59 TPR8NC Non conductive hydraulic hose for aerial lift High pressure general hydraulic systems that
Non-conductive R8 equipment with higher working pressures may contact high voltage sources

60 STH
MISC.

Laundry equipment, plastic moulding Teflon liner and SS braid allow high temperature
St. Steel Teflon® hose presses, steam and hot air discharge and chemical capability

Chemical Compatibility Tables Commence page 59

ORDERING PIRTEK ASSEMBLIES

Should you wish to describe a Pirtek hose assembly in an abbreviated form, please use the following format. A forward slash is used
to separate each field. Product Codes for fittings can be found in Pirtek Catalogue Section C (except Mining Fittings Section U)

If spiral guard SSG-025 were fitted over the full length, the designation would be:

R1AT-12 / JF1-1712J / C614-1212J / 1200 / SSG-025

If both ends were fitted with the 45° flanged elbow set in alignment, the designation would appear:

R1AT-12 / C614-1212J / 1200 / 0

Generic Pattern : Hose / End A / End B / Length / Protection / Angle

This page is part of a complete catalogue containing technical and safety data. 3
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 WARNING
HYDRAULIC HOSES

SAFETY PRECAUTIONS FOR

THE USE OF
PIRTEK® HOSE ASSEMBLIES
Your Personal Safety may directly or indirectly be compromised if the hose assembly is abused.

By following the INSTRUCTIONS below, the more common abuses of hose and hose assemblies can be
avoided.

INSPECT the hose assembly before each use.

REPLACE the hose assembly immediately if:

A. The cover appears abnormal
B. You believe it may be abnormal
SAFETY WARNING

C. There is any fluid leakage

D. The fittings are damaged
E. The hose is damaged
F. Reinforcement is visible through the cover
DO NOT EXCEED the maximum working pressure of the hose.
DO NOT KINK the hose assembly.
DO NOT BEND beyond the specified minimum bend radius of the hose.
DO NOT EXPOSE to temperatures beyond the published maximums for the hose or fluid being conveyed.
DO NOT USE AS A STRENGTH MEMBER for pulling or lifting equipment. Use support cables for vertical
installations.
USE ONLY WITH COMPATIBLE FLUIDS as outlined in the Chemical Compatibility Charts or as
specifically approved in writing by Pirtek Fluid Systems.
PIN PRICK THE COVER of hoses used for compressed air above 17 bar or 250 psi to allow the safe escape
of air that permeates through the liner and reinforcement (except STH, R5HT and 3130). The maximum
working pressure and temperature must also be reduced by 30%.
Use only Pirtek HOSE AND FITTINGS COMBINATIONS as designated in their current assembly guidelines.
Use only Pirtek PROCEDURES and ASSEMBLY EQUIPMENT as published and maintained in their M.A.P.S.
documentation.
Relationship between actual working presasure and service life
100
• The use of conventional wire reinforced Experimental pressure waveform
90
rubber hose often entails the pressure Peak pressure 150 ± 7%
Pressure rising rate 5% of one cycle

fluctuations of fluid. 150

Rated Pressure at 100

80
Pressure as a % of

125
• The factors concerned with such pressure 70 100
Rated pressure

fluctuations are generally classified into two: 75

% of Service Life

those stemming from the pump itself, and 60

50
the others ascribable to external impacts 50
25
(kgf/cm ) 2

imparted to the hose via the operating 0

15% of one cycle
demands. The latter are considered to have 40 1/35 minute a cycle

the greater effect on the service life of the

30
hose.
• External impulse pressure is estimated to 20

be 150% of the set pressure (actual working 10

pressure) of a relief valve, and sometimes
exceeds 300%. 0
100 125 150 200 300 400 500 600
Actual working pressure %
Recommended working pressure

4 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
 FAST FIND TABLE
SIZE, PRESSURE, TEMPERATURE

HYDRAULIC HOSES
Product Code & Hose Type Working Pressure (bar) Temp. Pg.
dia. (ins.) 1
/8 3
/16 1
/4 5
/16 3
/8 1
/2 5
/8 3
/4 1 1 /4
1
1 /2 1 /4
1 3
2 2 /2
1
3 3 /2
1
4 5
°C
mm size 3.2 4.8 6.4 9.7 13.0 16.0 19.1 25.4 32.0 38.0 50.0 63.5 76.0 90.0 102 125.0

R4HT Hydraulic Suction/Delivery 21 17 14 10 10 10 13 13 13 -40°/+135° 6

IROFSD Oil Fuel Suction 10 10 10 10 10 10 10 10 10 10 -20°/+100° 7
IRFWSDH FRAS Air/Water Suction 20 20 20 20 20 -15°/+70° 8
MPH Multipurpose 35 35 35 35 35 35 35 -40°/+100° 9
IRFAW FRAS Air / Water 20 20 20 20 20 20 20 20 20 -15°/+70° 10
LPHT Low pressure hydraulic 21 21 21 21 21 -40°/+149° 11
R5HT High Temp 100R5 Unique diameters throughout range 3/16” to 1.13/16” -40°/+135° 12
HTAB/HTFH Engine/Air Brake Hose Unique diameters throughout range 3/16” to 1.3/8” -40°/+149° 13
JW250 / A Jet Wash 250 bar 250 250 -40°/+155° 15
JW400 / A Jet Wash 400 bar 400 -40°/+155° 16
R1AT 1-Wire Hydraulic 250 225 215 180 160 140 105 88 63 50 40 -40°/+100° 17
R1ATFS Fire Suppression 225 180 160 105 -40°/+100° 18
HT1 SINGLE WIRE BRAID 225 215 180 160 130 105 88 63 50 40 -40°/+150° 19
R2AT/2SC 2-Wire Hydraulic 415 400 350 330 275 250 215 165 125 90 80 69/70 70 -40°/+100° 20

FAST FIND TABLE

R2ATHT 2-Wire High Temp. 396 345 293 224 207 172 -40°/+150° 21
HT2 TWO WIRE BRAID 400 350 330 275 250 215 165 125 90 80 -40°/+150° 22
JH70 Jacking Hose 700 700 -40°/+100° 23
C21 Isobaric 210 bar 210 -40°/+120° 24
C25, PC25 Isobaric 250 bar 250 250 250 250 250 -40°/+120° 25,29
PC28PS Isobaric 280 bar 280 280 280 -40°/+120° 26
C35, PC35 Isobaric 350 bar 380 350 350 350 350 350 350 350 350 -40°/+120° 27,30
C42, PC42 Isobaric 420 bar 420 420 420 420 420 420 420 420 -40°/+120° 28,31
C45 Isobaric 450 bar 450 -40°/+100° 32
JBF Large Bore 140 -40°/+100° 33
LPG LPG Gas Hose 26 26 -20°/+125° 34
R12C 4000-2500 psi Spiral 276 276 276 276 276 207 172 172 -40°/+121° 35
R13C 5000 psi Spiral 345 345 345 345 345 -40°/+120° 36
PE2 2 wire hybrid 450 390 350 290 280 250 -40º/+100º 37
PE4_6 4 & 6 wire spiral 420 420 420 420 350/420 420 -40º/+121º 38
WB 2 Water Blast 1100 1000 -40°/+80° 39
WB 3 Water Blast 1450 -40°/+80° 39
PSH Power Steering 78 -40º /+100 41
30CT Cold Temp Isobaric 207 207 207 207 207 207 -54°/+94° 42
3JET Water Jetting Hose 331 331 -40°/+66° 43
30CTX2 Twin Line 30CT 207 207 207 207 207 -54°/+94° 44
3130 Medium Pressure 172 207 207 172 155 138 86 69 -40°/+100° 45
3360X2 Twin Line Forklift 207 -54°/+94° 46
37AL Non-conductive 207 207 207 207 207 -54°/+100° 47
37ALX2 Twin Line 37AL 207 207 207 -54°/+100° 48
3800 High Pressure compact 345 345 276 241 -40°/+100° 49
3E80 HP Non-conductive 345 276 241 -40°/+100° 50
13R80 High Pressure 345 345 276 241 155 138 -40°/+100° 51
3VEO High Pressure Jacking 689 551 -40°/+66° 52
TP1W 1 wire Thermoplastic 325 300 240 225 190 -54°/+100° 53
TP2W 2 wire Thermoplastic 400 350 330 275 215 165 -40°/+100° 54
TPSCO Sewer Cleaning 207 207 207 -40°/+55° 55
TPR7 Medium Pressure R7 230 210 200 190 175 140 -54°/+100° 56
TPR7NC Non-Conductive R7 210 200 175 140 -40°/+100° 57
TPR8 High Pressure R8 420 350 350 280 245 165 145 -40°/+100° 58
TPR8NC Non-Conductive R8 350 280 245 -40°/+100° 59
STH St Steel Teflon Hose 206 206 172 138 120 103 69 69 -55°/+240° 60

This page is part of a complete catalogue containing technical and safety data. 5
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 R4HT
HYDRAULIC HOSES

HIGH TEMP OIL SUCTION & DELIVERY

Construction Applications Reference Specifications

Inner Tube: Hardwall hose for suction and delivery of oil Tested in accordance with performance
Black smooth NBR (Nitrile) compound, oil at high temperatures in hydraulic systems. specifications:
resistant Extremely flexible. SAE100 R4
Reinforcement: Temperature Range: Approvals:
High strength synthetic cord plus embedded -40°C up to +135°C mineral oil MSHA
steel helix wire -40°C up to +70°C water based fluids Prolonged usage with water based fluids
at temperatures above 70°C will allow wire
corrosion as a result of diffusion through the
inner liner.
Cover: Comment: Hose Tails:
RUBBER HOSE

Black, smooth (wrapped finish) Hypalon rubber Lay line example may not be a true indication Pirtek ‘J’ Series & SF Series
compound flame retardant, resistant to abrasion, of current status. Refer Pirtek for current L Series, Cam & Groove, Combination Steel
oils and weathering information (all with clamps)

Lay line example: Embossed text on black background. Note Comment above
PIRTEK R4 HIGH TEMP R4HT-32 50.8mm (2”) 10 BAR (145 PSI) MSHA

Min bend
Nominal ID OD Pressure bar Weight
Product Code radius
mm ins mm working min burst vacuum mm Kg/m
R4HT-12 19.1 3/4 30.5 21 83 0.9 60 0.66
R4HT-16 25.4 1 37 17 68 0.9 80 0.84
R4HT-20 31.8 1.1/4 44 14 56 0.9 100 1.02
R4HT-24 38.1 1.1/2 50 10 40 0.9 125 1.33
R4HT-32 50.8 2 63 10 40 0.9 150 1.71
R4HT-40 63.5 2.1/2 80 10 40 0.9 200 2.71
R4HT-48 76 3 92 13 52 0.9 240 3.28
R4HT-56 89 3.1/2 108 13 52 0.9 280 4.29
R4HT-64 102 4 121 13 52 0.9 320 4.80

6 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
IROFSD

HYDRAULIC HOSES
OIL / FUEL SUCTION & DELIVERY

Construction Applications Reference Specifications:

Inner Tube: Light weight hardwall suction and delivery hose
Black smooth NBR (Nitrile) compound, oil for fuels having an aromatic content up to 30%,
resistant and mineral oils. Suitable in hydraulic systems
and for loading and unloading of tank trucks,
refineries and maintenance shops

Reinforcement: Temperature Range: Limitations:

High strength synthetic cord plus embedded -20°C up to +100°C for mineral oils Not suitable for ester oils
steel helix wire and anti-static copper wire -20ºC up to +70ºC for fuels

RUBBER HOSE
Cover: Comment: Hose Tails:
Black, smooth (wrapped finish) SBR weather Lay line example may not be a true indication Pirtek J,T, 932, 934, 954 Series crimp fittings
resistant rubber compound of current status. Refer Pirtek for current L Series, Cam & Groove, Combination Steel
information (all with clamps)

Lay line example: Black text on yellow background. Note Comment above
PIRTEK OIL FUEL S/D IROFSD 10 BAR (150psi) WORK.PRESS.

Min bend
Nominal ID OD Pressure bar Weight
Product Code radius
mm ins mm working min burst vacuum mm Kg/m
IROFSD-019 19 3/4 30 10 30 0.9 80 0.67
IROFSD-025 25 1 35 10 30 0.9 105 0.80
IROFSD-032 32 1.1/4 42 10 30 0.9 135 0.98
IROFSD-038 38 1.1/2 49.5 10 30 0.9 165 1.34
IROFSD-045 45 1.3/4 57 10 30 0.9 180 1.60
IROFSD-051 51 2 63 10 30 0.9 230 1.84
IROFSD-063 63 2.1/2 78 10 30 0.9 300 2.79
IROFSD-076 76 3 89 10 30 0.9 360 2.94
IROFSD-102 102 4 118 10 30 0.9 500 4.94
IROFSD-125 125 5 145 10 30 0.9 620 7.50

This page is part of a complete catalogue containing technical and safety data. 7
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 IRFWSDH
HYDRAULIC HOSES

FRAS AIR / WATER SUCTION & DELIVERY

Construction Applications Reference Speifications

Inner Tube: Hardwall hose designed for arduous air / water Approvals:
Black, smooth, electrically conductive NBR applications in underground coal mining, where Meets or exceeds
(Nitrile) rubber compound fire resistant, anti static properties are required AS2660, incorporating AS1180.13A and
AS1180.10B FRAS
Reinforcement: Temperature Range: FRAS Rated in all sizes
High strength synthetic cord plus helix wire -15°C up to +70°C

Cover: Comment: Hose Tails:

Black smooth (wrapped finish) electrically Lay line example may not be a true indication Industrial fittings
conductive CR (Neoprene) synthetic rubber of current status. Refer Pirtek for current High pressure 2 or 4 bolt clamps
RUBBER HOSE

compound, fire, oil weathering and UV resistant information Pirtek “J” series

Lay line example: White text on orange background. Note Comment above
PIRTEK FRAS WATER SUCTION & DELIVERY IRFWSDH 20BAR (290PSI) W.P MEETS & EXCEEDS AS2660 CLASS B

Min bend
Nominal ID OD Pressure bar Weight
Product Code radius
DN mm ins mm working min burst vacuum mm kg/m
IRFWSDH-025† 25 25.4 1 42.5 20 80 0.9 125 1.34
IRFWSDH-051 50 50.8 2 71 20 80 0.9 255 2.58
IRFWSDH-063 63 63.5 2.1/2 84 20 80 0.9 320 3.27
IRFWSDH-076 75 76 3 97 20 80 0.9 375 3.96
IRFWSDH-102 100 102 4 124 20 80 0.9 610 5.71
IRFWSDH-152† 150 152 6 178 20 80 0.9 1000 11.46
† Subject to availability

8 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
MPH

HYDRAULIC HOSES
MULTIPURPOSE HOSE

Construction Applications Reference Specifications

Inner Tube: Low pressure hose for fluids such as mineral Exceeds SAE J 517 (100 R6)
Black, smooth NBR (Nitrile) seamless synthetic and vegetable oils, aqueous emulsions, water, Exceeds EN 854 R6
rubber, oil resistant air and inert gases. JIS B 8360

Reinforcement: Temperature Range: Impulse Testing:

Two or four spirals of textile fibre Water 0º C to +50º C (continuous) 400 000 cycles of JIS waveform @ 133%
Water 0º C to +70º C (temporary) of working pressure (hose only) all sizes
Air -40º C to +50º C (in case of air applications, Safety Factor 4:1
pressure should be less than 15bar)
Other fluid -40°C up to +100°C

RUBBER HOSE
-40°C up to 70°C external ambient
Cover: Comment: Hose Tails:
Black CR (Neoprene) synthetic rubber compound Lay line example may not be a true indication Pirtek ‘P’ Series all sizes, Hose Clamps not
resistant to abrasion, oils, ozone and weathering of current status. Refer Pirtek for current required and could possibly damage hose.
information Pirtek ‘T’ Series option on 3/8, 1/2, 5/8 sizes

Lay line example: Green text on black background. Note Comment above
PIRTEK MULTI MPH-12 (3/4”) 35BAR W.P. (500 PSI)

Min bend
Product Nominal ID Reinforcement OD Pressure bar Weight
radius
Code
mm in mm working min burst mm Kg/m
MPH-04 6.3 1/4 4 fabric spiral 14.0 35 140 55 0.15
MPH-05 8.0 5/16 4 fabric spiral 15.8 35 140 60 0.19
MPH-06 9.5 3/8 4 fabric spiral 17.4 35 140 65 0.21
MPH-08 12.7 1/2 4 fabric spiral 21.3 35 140 90 0.28
MPH-10 15.9 5/8 2 fabric spiral 23.5 35 140 110 0.30
MPH-12 19.0 3/4 4 fabric spiral 31.4 35 140 135 0.59
MPH-16 25.4 1 4 fabric spiral 37.5 35 140 170 0.74

This page is part of a complete catalogue containing technical and safety data. 9
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 IRFAW
HYDRAULIC HOSES

FRAS AIR / WATER / STONEDUST

Construction Applications Reference Specifications

Inner Tube: Softwall hose designed for arduous air / water Approvals:
Black smooth electrically conductive NBR applications in underground coal mining, where Meets or exceeds AS2660-91B, incorporating
(Nitrile) oil resistant rubber compound fire resistant anti static properties are required AS1180.13A and AS1180.10B FRAS

Reinforcement: Temperature Range: Hose Tails:

2 or 4 spiral plies of high strength synthetic cord -15°C up to +70°C Industrial fittings / FFI Ferrules
High pressure 2 or 4 bolt clamps
Pirtek ‘J’ Series
Cover: Comment:
Black smooth (wrapped finish) electrically Lay line example may not be a true indication
RUBBER HOSE

conductive CR (Neoprene) rubber compound of current status. Refer Pirtek for current
with orange spiral stripe. Fire, oil and weather information
resistant

Lay line example: Black text on orange background. Note Comment above
PIRTEK AIR / WATER / STONEDUST FRAS IRFAW 20 BAR (290 psi) WORK. PRESS. MEETS & EXCEEDS AS 2660 “CLASS B”

Nominal ID Reinforcement OD Pressure bar Weight

Product Code
mm in mm working min burst Kg/m
IRFAW-013 13 1/2 2 spiral plies 23 20 80 0.36
IRFAW-019 19 3/4 2 spiral plies 29 20 80 0.47
IRFAW-025 25 1 2 spiral plies 37 20 80 0.70
IRFAW-032 32 1.1/4 2 spiral plies 46 20 80 1.02
IRFAW-038 38 1.1/2 2 spiral plies 52.5 20 80 1.21
IRFAW-051 51 2 2 spiral plies 66 20 80 1.60
IRFAW-063 63.5 2.1/2 4 spiral plies 81 20 80 2.27
IRFAW-076 76 3 4 spiral plies 93 20 80 2.53
IRFAW-102 102 4 4 spiral plies 120 20 70 3.60

10 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
LPHT

HYDRAULIC HOSES
LOW PRESSURE HIGH TEMP. HOSE

Construction Applications Reference Specifications

Inner Tube: Low pressure textile braid hose for petroleum
Seamless CPE/AQP rubber, oil resistant based hydraulic oil, lubricating fluids, diesel,
unleaded petrol, aqueous emulsions, water and
air. Not recommended for impulse applications.
Note: Not recommended for Ethanol/Methanol,
including blends.(Excluding E10)
Reinforcement: Temperature Range: Approvals
One braid of polyester -40°C up to +149°C hydraulic, transmission oils MSHA 2G
(petroleum based) & Diesel
-40°C up to +100°C E10 & B20 (biodiesel)

RUBBER HOSE
Cover: 0°C up to +82°C water, water based fluid &
Blue CPE rubber, resistant to oils, ozone, flame glycol (anti-freeze)
and weathering 0°C up to +121°C air
-40°C up to +121°C ambient

Comment: Hose Tails:

Lay line example may not be a true indication Pirtek ‘P’ Series, Hose Clamps not required and
of current status. Refer Pirtek for current could possibly damage hose.
information Pirtek ‘T’ Series

Lay line example: Black text on blue background. Note Comment above
PIRTEK LOW PRESSURE HIGH TEMP LPHT-04 6.4mm (1/4”) 21 bar (304 PSI) W.P MSHA

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
mm in mm working min burst Vacuum mm Kg/m
LPHT-04 6.4 1/4 12.4 21 84 0.9 76.2 0.12
LPHT-06 9.5 3/8 16.0 21 84 0.9 76.2 0.18
LPHT-08 12.7 1/2 19.0 21 84 0.9 127.0 0.22
LPHT-10 15.9 5/8 23.1 21 84 0.6 152.4 0.31
LPHT-12 19.1 3/4 26.4 21 84 0.6 177.8 0.37

This page is part of a complete catalogue containing technical and safety data. 11
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 R5HT
HYDRAULIC HOSES

LOW PRESSURE HOSE

Construction Applications Reference Specifications

Inner Tube: Low to medium pressures hose that will handle Approvals:
Seamless CPE/AQP rubber, oil resistant high temperature hydraulic fluids such as mineral Exceeds SAE J 517 (100 R5)
and vegetable oils, diesel, B20, petrol, E10,
aqueous emulsions, water, air and inert gases
Reinforcement: Temperature Range: Hose Tails:
One textile braid and one braid of high tensile -40°C up to +149°C hydraulic, transmission oils Pirtek ‘A’ Series (field attachable)
steel wire (petroleum based) & Diesel Pirtek ‘R’ Series (crimp)
-40°C up to +100°C E10 & B20 (biodiesel)
0°C up to +82°C water, water based fluid &
glycol (anti-freeze)
RUBBER HOSE

0°C up to +121°C air

-40°C up to +121°C ambient

Cover: Comment:
Black synthetic rubber with blue polyester textile Lay line example may not be a true indication
outer braid resistant to abrasion, oils, ozone and of current status. Refer Pirtek for current
weathering. Permeable cover allows safe escape information
of entrapped air when used to conduct high
pressure air

Lay line example: White ink-jet text on blue background. Note Comment above
PIRTEK HI-TEMP 8.3MM (5/16”) R5HT-06 155 BAR (2,250PSI) WORK. PRESS: 150°C./SAE J1402 TYPE AII 2Q04 BATCH 0037

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
mm in mm working min burst mm Kg/m
R5HT-04 5.1 3/16 13.2 207 827 76 0.19
R5HT-05 6.8 1/4 14.8 207 827 86 0.24
R5HT-06 8.3 5/16 17.1 155 620 102 0.34
R5HT-08 10.7 13/32 19.5 138 552 117 0.39
R5HT-10 13.2 1/2 23.4 121 483 140 0.55
R5HT-12 16.4 5/8 27.4 103 414 165 0.69
R5HT-16 22.8 7/8 31.4 55 221 187 0.66
R5HT-20 29.2 1.1/8 38.1 43 172 229 0.78
R5HT-24 35.5 1.3/8 44.4 34 138 267 1.00
R5HT-32 † 46.6 1.13/16 56.2 20.7 83 337 1.40

† Does not comply with SAE 100R5 operating pressure of 24 bar or minimum burst pressure of 96 bar

12 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
HTAB / HTFH

HYDRAULIC HOSES
ENGINE & AIR BRAKE* HOSE
EXTRA FLEXIBLE LOW PRESSURE HOSE

Construction Applications Reference Specifications

Inner Tube: Low to medium pressures hose that will handle * SAE J1402 Type AII in sizes -04 through -12
Seamless CPE/AQP rubber, oil resistant high temperature hydraulic fluids such as mineral DOT Regulation FMVSS106
and vegetable oils, aqueous emulsions, diesel, Consult Pirtek for specific Industry Approvals
B20, petrol, E10 fuels, lubricating oils, coolants,
water, air and inert gases
Reinforcement: Temperature Range:
One polyester braid and one braid of high tensile -40°C up to +149°C hydraulic, transmission oils
steel wire (petroleum based) & Diesel
-40°C up to +100°C E10 & B20 (biodiesel)
0°C up to +82°C water, water based fluid &

RUBBER HOSE
glycol (anti-freeze)
0°C up to +121°C air
-40°C up to +121°C ambient

Cover: Comment: Hose Tails:

Black synthetic rubber with black polyester textile Lay line example may not be a true indication Pirtek ‘A’ Series (Field Attachable)
outer braid resistant to abrasion, oils, ozone and of current status. Refer Pirtek for current Pirtek ‘R’ Series (Crimp)
weathering. Permeable cover allows safe escape information
of entrapped air when used to conduct high
pressure air

Lay line example: White Ink-Jet on black background. Note Comment above
PIRTEK HI-TEMP AIR BRAKE 7.9MM (5/16”) HTAB-06 103 BAR (1500PSI) WORK. PRESS: 149°C. SAE J1402 TYPE AII 2Q07

PIRTEK HI-TEMP FLEX HOSE 22.4MM (7/8”) HTFH-16 28 BAR (400PSI) WORK. PRESS: 149°C. 2Q07

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
mm in mm working min burst mm Kg/m
HTAB-04 4.8 3/16 13.7 138 552 19.1 0.19
HTAB-05 6.4 1/4 15.7 103 412 25.4 0.24
HTAB-06 7.9 5/16 17.7 103 412 31.8 0.28
HTAB-08 10.4 13/32 20.1 86 345 44.5 0.33
HTAB-10 12.7 1/2 24.0 86 345 57.2 0.50
HTAB-12 15.9 5/8 27.9 52 207 69.9 0.58
HTFH-16 22.4 7/8 32.3 28 110 88.9 0.55
HTFH-20 28.7 1.1/8 38.9 21 83 114.3 0.68
HTFH-24 35.1 1.3/8 46.0 17 69 139.7 0.85

This page is part of a complete catalogue containing technical and safety data. 13
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
HYDRAULIC HOSES
RUBBER HOSE

14 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
 JW250 / JW250A

HYDRAULIC HOSES
JET WASH HOSE

Construction Applications
Inner Tube: Synthetic rubber, resistant to water Extremely flexible, high pressure compact hose
and detergents in aqueous solution for pressure cleaners. Suitable for conducting
water and detergents in aqueous solution
Reinforcement: Temperature Range:
One braid of high tensile steel wire -40°C up to +155°C
† Comments:
Cover: Not suitable for steam and hydraulic applications. Hose Tails:
Pin pricked blue synthetic rubber resistant to Lay line examples may not be a true indication Pirtek ‘K’ Series all sizes
abrasion, oils, ozone and weathering. Specify of current status. Refer Pirtek for current
JW250A for an even higher level of abrasion information

RUBBER HOSE
resistance with black cover

Lay line example: Embosed text on blue cover (standard cover). Embossed text on black cover (abrasion resistant cover). Note: Comment above

PIRTEK JETWASH 9.5 mm (3/8”) JW250-06 250 BAR (3625 PSI) WORK PRESS MAX 155°C

PIRTEK JETWASH 6.5 mm (1/4”) JW250A-04 250 BAR (3625 PSI) WORK PRESS MAX 155°C ABRASION RESISTANT COVER

Min bend
Product Nominal ID OD mm Pressure bar Weight
radius
Code
mm in Wire Cover working min burst mm Kg/m
JW250-04 6.4 1/4 9.9 11.8 250 1000 35 0.16
“JW250-04
6.4 1/4 10.2 12.5 250 1000 60 0.18
SERIES II”
JW250A-04 6.4 1/4 9.9 11.8 250 1000 35 0.16
"JW250A-04
6.4 1/4 10.2 12.5 250 1000 60 0.18
SERIES II"
JW250-06 9.6 3/8 13.2 16.5 250 950 75 0.29
"JW250-06
9.6 3/8 12.8 16.5 250 1000 75 0.29
SERIES II"

JWH-06 Blue strain reliever to suit JW250-06 and JW250A-06 hose

This page is part of a complete catalogue containing technical and safety data. 15
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 JW400 / JW400A
HYDRAULIC HOSES

2-WIRE JET WASH HOSE

Construction Applications
Inner Tube: Synthetic rubber, resistant to water Extremely flexible, high pressure compact hose
and detergents in aqueous solution for pressure cleaners. Suitable for conducting
water and detergents in aqueous solution
Reinforcement: Temperature Range:
Two braid of high tensile steel wire -40°C up to +155°C

Cover: † Comments: Hose Tails:

Pin pricked blue synthetic rubber resistant to Not suitable for steam and hydraulic applications Pirtek ‘K’ Series all sizes
abrasion, oils, ozone and weathering. Specify Lay line examples may not be a true indication
JW400A for an even higher level of abrasion of current status. Refer Pirtek for current
RUBBER HOSE

resistance with black cover information

Lay line example: Embosed text on blue cover (standard cover). Embossed text on black cover (abrasion resistant cover). Note: Comment above
PIRTEK JETWASH 9.5 mm (3/8”) JW400-06 400 BAR (5800 PSI) WORK PRESS MAX 155°C

PIRTEK JETWASH 69.5 mm (3/8”) JW400A-06 400 BAR (5800 PSI) WORK PRESS MAX 155°C ABRASION RESISTANT COVER

Min bend
Product Nominal ID OD mm Pressure bar Weight
radius
Code
mm in Wire Cover working min burst mm Kg/m
JW400-06 9.5 3/8 14.8 16.8 400 1320 90 0.37
"JW400-06
9.5 3/8 15.4 17.3 400 1556 90 0.4
SERIES II"
JW400A-06 9.5 3/8 14.8 16.8 400 1320 90 0.37
"JW400A-06
9.5 3/8 15.4 17.3 400 1556 90 0.4
SERIES II"

JWH-06 Blue strain reliever to suit JW400-06 and JW400A-06 hose

16 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
R1AT

HYDRAULIC HOSES
SINGLE WIRE BRAID

Construction Applications Reference Specifications

Inner Tube: Medium pressure hose for hydraulic fluids such Tested in accordance with performance
Seamless NBR (Nitrile) rubber, oil resistant as mineral oils, aqueous emulsions, water, air specifications:
and inert gases SAE100 R1AT S
EN853 1SN
Reinforcement: Temperature Range: Approvals:
One braid of high tensile steel wire -40°C up to +100°C mineral oil AS2660 test requirements-
-40°C up to +60°C water based fluids AS1180 10B and AS1180.13A (FRAS)
0°C up to +60°C water MSHA
Cover: 0°C up to +50°C air Prolonged usage with water or water based
Black synthetic rubber resistant to abrasion, oils, -40°C up to +70°C ambient fluids at temperatures above 70°C will allow

RUBBER HOSE
ozone and weathering Cover must be pin pricked if hose is to be used wire corrosion as a result of diffusion through the
to convey air above 17 bar inner liner
Comment:
Lay line example may not be a true indication Hose Tails:
of current status. Refer Pirtek for current Pirtek ‘K’ Series to 5/8”
information. Pirtek ‘J’ Series 3/4” to 2”

Lay line example: White text on black background. Note Comment above
PIRTEK SAE 100R1 AT TYPE S R1AT-04 6.4 mm (1/4”) 225 BAR (3263 PSI) FRAS

OD mm Min. bend
Product Nominal Diameter Reinforce- Pressure bar Weight
(AVG) radius
Code ment
DN inch mm Cover working burst mm kg/m
R1AT-03 † 5 3/16 4.9 1 braid 11.8 250 1000 90 0.18
R1AT-04 6 1/4 6.4 1 braid 13.3 225 900 100 0.23
R1AT-05 † 8 5/16 7.9 1 braid 15.0 215 850 115 0.27
R1AT-06 10 3/8 9.5 1 braid 17.3 180 720 125 0.37
R1AT-08 13 1/2 12.7 1 braid 20.3 160 640 180 0.45
R1AT-10 16 5/8 15.9 1 braid 23.5 130 520 201 0.50
R1AT-12 20 3/4 19.1 1 braid 27.5 105 420 240 0.62
R1AT-16 25 1 25.4 1 braid 35.6 88 352 300 0.93
R1AT-20 32 1 1/4 31.8 1 braid 43.2 63 252 420 1.36
R1AT-24 40 1 1/2 38.1 1 braid 50.4 50 200 500 1.70
R1AT-32 50 2 50.8 1 braid 64.3 40 160 630 2.43
† Non-standard product. Available to special order

This page is part of a complete catalogue containing technical and safety data. 17
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 R1ATFS
HYDRAULIC HOSES

SINGLE WIRE BRAID

FIRE SUPPRESSION APPROVAL

Construction Applications Reference Specifications

Inner Tube: Medium pressure hose for hydraulic fluids SAE J 517 (SAE 100R1AT)
Seamless synthetic rubber, resistant. to oil. such as mineral and vegetable oils, aqueous EN 853 1SN
emulsions and water. Former DIN 20022 1SN (part 3)
Meets hose requirements outlined in AS5062
Reinforcement: Temperature Range:
One braid of high tensile steel wire. -40°C up to +100°C (125°C intermittent) Approvals:
MSHA 2G in all sizes
Comment: Approved within Australia for use on fire
Cover: Lay line example may not be a true indication suppression systems
Red synthetic rubber resistant to abrasion, oils, of current status. Refer Pirtek for current
RUBBER HOSE

ozone and weathering information. Hose Tails:

Pirtek ‘K’ Series to 5/8”
Pirtek ‘J’ Series 3/4”

Lay line example: White text on red background. Note Comment above
PIRTEK R1ATFS — DIN EN 853 1SN 25mm (1”) R1AT-16 88 BAR (1,200 PSI) WORK. PRESS. MSHA

Min. bend
Nominal Diameter OD mm Pressure bar Weight
Product Code radius
DN inch mm Wire Cover working burst mm kg/m
R1ATFS-04 6 1/4 6.4 11.1 13.4 225 900 100 0.23
R1ATFS-06 10 3/8 9.5 15.1 17.4 180 720 130 0.33
R1ATFS-08 12 1/2 12.7 18.3 20.6 160 640 180 0.41
R1ATFS-12 19 3/4 19.0 25.4 27.7 105 420 240 0.61

18 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
HT1

HYDRAULIC HOSES
SINGLE WIRE BRAID
HIGH TEMPERATURE

Construction Applications Reference Specifications

Inner Tube: High temperature hose. Tested in accordance with performance
High temperature synthetic rubber, resistant. to Hydraulic oils, both mineral and biological; specifications:
oil. Polyglycol base oils, water-oil emulsions and SAE100 R1AT
water. EN853 1SN

Reinforcement: Temperature Range: Approvals:

One braid of high tensile steel wire. Hydraulic oils: -40°C up to +135°C occasional MSHA
peaks up to +150°C
Polyglycol base oils, water-oil emulsions and Hose Tails:
Cover: water: up to +85°C Pirtek ‘J’ Series

RUBBER HOSE
Blue synthetic rubber resistant to abrasion, oils, Air: (with Oil mist) up to 135°C
ozone and weathering Not suitable with dry air.

Comment:
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information.

Lay line example: Embossed text on blue background. Note Comment above

INTERTRACO FlexIT HTI DN25-1” - HIGH TEMP 135°C - 275°F EN853 1SN SAE100R1AT WP 88 -1250PSI MSHA

Min. bend
Product Nominal Diameter Reinforce- OD mm Pressure bar Weight
radius
Code ment
DN inch mm Cover working burst mm kg/m
HT1-04 † 6 1/4 6.4 1 braid 13.2 225 900 100 0.21
HT1-05 † 8 5/16 7.9 1 braid 14.5 215 860 115 0.24
HT1-06 † 10 3/8 9.5 1 braid 17.2 180 720 125 0.33
HT1-08 † 12 1/2 12.7 1 braid 20.4 160 640 180 0.41
HT1-10 † 16 5/8 15.9 1 braid 23.5 130 520 200 0.45
HT1-12 19 3/4 19.1 1 braid 27.5 105 420 240 0.58
HT1-16 25 1 25.4 1 braid 35.4 88 352 300 0.88
HT1-20 † 31 1.1/4 31.8 1 braid 43.5 63 252 420 1.23
HT1-24 † 38 1.1/2 38.1 1 braid 50.0 50 200 500 1.51
HT1-32 † 51 2 50.8 1 braid 63.6 40 160 630 1.97

† Non-standard product. Available upon request

This page is part of a complete catalogue containing technical and safety data. 19
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 R2AT/2SC
HYDRAULIC HOSES

TWO WIRE BRAID

Construction Applications Reference Specifications

Inner Tube: Medium to high pressure hose for hydraulic fluids Tested in accordance with performance
Seamless NBR (Nitrile) rubber, oil resistant such as mineral oils, aqueous emulsions, water, specifications:
air and inert gases SAE100 R2AT
Reinforcement: EN853 2SN
Two braids of high tensile steel wire Temperature Range: Approvals:
-40°C up to +100°C mineral oil AS2660 test requirements-
-40°C up to +60°C water based fluids AS1180.10B and AS1180.13A (FRAS)
Cover: 0°C up to +60°C water MSHA approved
Black synthetic rubber resistant to abrasion, oils, 0°C up to +50°C air Prolonged usage with water or water based
ozone and weathering -40°C up to +70°C ambient fluids at temperatures above 70°C will allow
RUBBER HOSE

Cover must be pin pricked if hose is to be used wire corrosion as a result of diffusion through the
to convey air above 17 bar inner liner
Comment: Hose Tails:
Lay line example may not be a true indication Pirtek ‘K’ Series to 5/8”
of current status. Refer Pirtek for current Pirtek ‘J’ Series 3/4” to 3”
information. 954, 934 Series 2.1/2” to 3”

Lay line example: White text on black background. Note Comment above
PIRTEK SAE 100R2AT R2AT-12 19.1 mm (3/4”) 215 BAR (3118 PSI) FRAS

Product Nominal Diameter Reinforce- OD mm Pressure bar Min. bend Weight

Code ment ( AVG ) radius
DN inch mm Cover working burst mm kg/m
R2AT-03 † 5 3/16 4.9 2 braids 13.4 415 1650 90 0.30
R2AT-04 6 1/4 6.4 2 braids 14.9 400 1600 100 0.37
R2AT-05 † 8 5/16 7.9 2 braids 16.6 350 1400 115 0.45
R2AT-06 10 3/8 9.5 2 braids 18.9 330 1320 125 0.50
R2AT-08 13 1/2 12.7 2 braids 21.9 275 1100 180 0.62
R2AT-10 16 5/8 15.9 2 braids 25.2 250 1000 205 0.68
R2AT-12 20 3/4 19.1 2 braids 29.2 215 860 240 0.89
R2AT-16 25 1 25.4 2 braids 37.9 165 660 300 1.45
R2AT-20 32 1 1/4 31.8 2 braids 48.0 125 500 420 2.25
R2AT-24 40 1 1/2 38.1 2 braids 54.4 90 360 500 2.61
R2AT-32 50 2 50.8 2 braids 67.0 80 320 630 3.31
R2AT-40 63 2 1/2 63.5 2 braids 78.0 69 276 762 3.80
2SC-40 63 2 1/2 63.5 2 braids 76.5 70 280 762 2.90
2SC-48 § 76 3 76.2 2 braids 90.5 70 § 280 900 3.98
† Non standard product. Available to special order
§ Safety factor only 3.4:1 when used in conjunction with 934 Series hose tails
Note: 2SC-40 and 2SC-48 hoses are not included in Standard EN857-2SC

20 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
R2ATHT

HYDRAULIC HOSES
TWO WIRE BRAID HIGH TEMP.

Construction Applications Reference Specifications

Inner Tube: Hydraulic system service with petroleum, Exceeds SAE J 517 (SAE 100R2AT)
High temp. elastomer rubber, resistant to oil fire resistant and water base fluids, fuel and EN 853 2SN
lubricating systems Former DIN 20022 2SN (part 4)
Temperature Range: Approvals:
Reinforcement: -40°C up to +150°C MSHA
Two braids of high tensile steel wire except: air not to exceed 121°C FRAS AS1180.10B &13A
: water not to exceed 70°C
Comment: Limitations:
Cover: Lay line example may not be a true indication Cover must be pin pricked if hose is to be used
Blue elastomer rubber resistant to abrasion, oils, of current status. Refer Pirtek for current to conduct air above 17 bar pressure

RUBBER HOSE
ozone and weathering information.
Hose Tails:
Pirtek ‘K’ Series to 5/8”
Pirtek ‘J’ Series 3/4” to 2”

Lay line example: White text on a dark blue layline. Note Comment above
PIRTEK SAE 100 R2 AT — DIN EN 853 2SN “HIGH TEMP” 25mm (1”) R2ATHT-16 172 BAR (2494 PSI) WORK.PRESS: 150`C MAX MSHA FRAS

Product Nominal Diameter OD mm Pressure bar Min. bend Weight

Code radius
DN inch mm Wire Cover working burst mm kg/m
R2ATHT-04 6 1/4 6.4 12.7 15.2 396 1584 102 0.40
R2ATHT-06 10 3/8 9.5 16.7 19.2 345 1380 127 0.58
R2ATHT-08 12 1/2 12.7 19.8 22.1 293 1172 178 0.69
R2ATHT-10 16 5/8 15.9 23.0 25.1 224 896 203 0.81
R2ATHT-12 19 3/4 19.0 27.0 29.5 207 828 241 1.00
R2ATHT-16 25 1 25.4 34.9 37.8 172 688 305 1.45

This page is part of a complete catalogue containing technical and safety data. 21
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 HT2
HYDRAULIC HOSES

TWO WIRE BRAID

HIGH TEMPERATURE

Construction Applications Reference Specifications

Inner Tube: High temperature hose. Tested in accordance with performance
High temperature synthetic rubber, resistant. to Hydraulic oils, both mineral and biological; specifications:
oil. Polyglycol base oils, water-oil emulsions and SAE100 R2AT
water. EN853 1SN

Reinforcement: Temperature Range: Approvals:

Two braids of high tensile steel wire. Hydraulic oils: -40°C up to +135°C occasional MSHA
peaks up to +150°C
Polyglycol base oils, water-oil emulsions and Limitations:
Cover: water: up to +85°C Cover must be pin pricked if hose is to be used
RUBBER HOSE

Blue synthetic rubber resistant to abrasion, oils, Air: (with Oil mist) up to 135°C to conduct air above 17 bar pressure.
ozone and weathering Not suitable with dry air. *-24 & -32 comes pin pricked

Comment: Hose Tails:

Lay line example may not be a true indication Pirtek ‘J’ Series
of current status. Refer Pirtek for current
information.

Lay line example: Embossed text on blue background. Note Comment above

INTERTRACO FlexIT HT2 DN32- 1.1/4” - HIGH TEMP 135°C - 275°F EN853 2SN SAE100R2AT WP 125 -1800PSI MSHA

Min. bend
Product Nominal Diameter Reinforce- OD mm Pressure bar Weight
radius
Code ment
DN inch mm Cover working burst mm kg/m
HT2-04 † 6 1/4 6.4 2 braid 15.0 400 1600 100 0.33
HT2-05 † 8 5/16 7.9 2 braid 16.4 350 1400 115 0.39
HT2-06 † 10 3/8 9.5 2 braid 18.8 330 1320 125 0.50
HT2-08 † 12 1/2 12.7 2 braid 22.2 275 1100 180 0.59
HT2-10 † 16 5/8 15.9 2 braid 25.2 250 1000 200 0.71
HT2-12 † 19 3/4 19.1 2 braid 29.3 215 860 240 0.86
HT2-16 † 25 1 25.4 2 braid 37.2 165 660 300 1.28
HT2-20 31 1.1/4 31.8 2 braid 47.3 125 500 420 2.02
HT2-24 38 1.1/2 38.1 2 braid 53.7 90 360 500 2.23
HT2-32 51 2 50.8 2 braid 66.7 80 320 630 2.85

† Non-standard product. Available upon request

22 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
JH70

HYDRAULIC HOSES
JACKING HOSE

Construction Applications Reference Specifications

Inner Tube: High pressure hose for hydraulic fluids including ISO 1307
Seamless NBR (Nitrile) rubber, oil resistant mineral and vegetable oil in hydraulic systems Approvals:
for jacking applications MSHA

Reinforcement: Temperature Range: Limitations:

Two braids of high tensile steel wire -40°C up to +100°C mineral oil Only for use as jacking hose.
 +125°C intermittent Note reduced Safety Factor at 2:1

Cover: Comment: Hose Tails:

Black synthetic rubber resistant to abrasion, oils, Lay line example may not be a true indication Pirtek ‘K’ Series NM1E-0404K, NM1E-0604K &

RUBBER HOSE
ozone and weathering of current status. Refer Pirtek for current NM1E-0606K
information. Use in conjunction with SRP Strain Relievers
REFER TO PIRTEK FOR ASSEMBLY
INSTRUCTION

SPECIAL NOTES:
Use ONLY NM1E-0404K, NM1E-0604K & NM1E-0606K Hose Tails and fit SRP Strain Relivers. Safety Factor is 2:1

Lay line example: Red text on black background. Note Comment above
PIRTEK JACKING HOSE JH70-04 6.4mm (1/4”) 700 BAR (10152 PSI) MSHA IC-215/0 ABRASION RESISTANT

Product Nominal Diameter Reinforce- OD mm Pressure bar Min. bend Weight

Code ment radius
DN inch mm Cover working burst mm kg/m
JH70-04 6 1/4 6.4 2 braid 14.8 700 1400 80 0.372
JH70-06 10 3/8 9.5 2 braid 19.0 700 1400 95 0.569
NOTE: Hose End Fittings: Use ONLY NM1E-0404K, NM1E-0604K & NM1E-0606K

JH70-06 assembly with Strain

Reliever attached to resist kinking of
the hose at the end of the Ferrule

SRP-04 Strain Reliever

SRP-06 Strain Reliever

This page is part of a complete catalogue containing technical and safety data. 23
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 C21
HYDRAULIC HOSES

ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic rubber, resistant Isobaric (constant 210 bar working pressure JIS K6349-3
to oil across all sizes) hose for hydraulic fluids such as SAE100R12
mineral and vegetable oils, aqueous emulsions,
Reinforcement: 4 spirals of high tensile steel water and inert gases Approvals:
wire Prolonged usage with water or water based MSHA
fluids at temperatures above 70°C will allow FRAS AS1180.10B & 13A
Cover: Abrasion resistant black synthetic rubber wire corrosion as a result of diffusion through the
resistant to oils, ozone and weathering. inner liner Hose Tails:
Pirtek ‘J’ or ‘X’ Series
Comment: Temperature Range:
RUBBER HOSE

Lay line example may not be a true indication -40°C up to +120°C mineral oil
of current status. Refer Pirtek for current -40°C up to +70°C water based fluids
information. 0°C up to +70°C water
-40°C up to +70°C ambient

Lay line example: White text on black hose. Note Comment above.
PIRTEK C21 50 mm (2”) C21-32 210 BAR (3,000 PSI) MSHA IC-104/1 ABRASION RESISTANT

Product Nominal Diameter OD mm Pressure bar Min. bend Weight

Code radius
DN inch mm Wire Cover working burst mm kg/m
C21-32 51 2” 50.8 63.6 66.7 210 840 500 4.20

24 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
C25

HYDRAULIC HOSES
ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic rubber, resistant Isobaric (constant 250 bar working pressure Meets or exceeds SAE J 517 (100 R16)
to oil across all sizes) hose for hydraulic fluids such as Meets or exceeds EN 857 2SC
mineral and vegetable oils, aqueous emulsions, Tested in accordance with SAE J517, EN856,
Reinforcement: Two braids of high tensile steel water and inert gases AS3791
wire, or 4 spirals of high tensile steel wire Prolonged usage with water or water based Approvals:
fluids at temperatures above 70°C will allow MSHA
Cover: Abrasion resistant black synthetic wire corrosion as a result of diffusion through the FRAS AS1180.10B & 13A
PVC nitrile rubber resistant to oils, ozone and inner liner
weathering Impulse Testing:
Temperature Range: Braided hoses as per SAE 100 R16

RUBBER HOSE
Comment: Spiral hoses: Spiral hoses as per SAE 100 R12
Lay line example may not be a true indication -40°C up to +120°C mineral oil
of current status. Refer Pirtek for current -40°C up to +70°C water based fluids Hose Tails:
information. 0°C up to +70°C water Pirtek ‘K’ Series to 5/8”
-40°C up to 70°C air Pirtek ‘J’ Series 3/4”, 1”
Pirtek ‘J’ or ‘X’ Series 1 1/4”, 1 1/2”
Braided Hoses:
-40°C up to +100°C mineral oil
-40°C up to +60°C water based fluids
0°C up to +60°C water
-40°C up to 70°C ambient

Lay line example: White text on black hose. Note Comment above
PIRTEK C25 SERIES III 25mm (1”) C25-16 250 BAR (3,500 PSI) W.P. MSHA IC-104/1 ABRASION RESISTANT

Product Nominal Diameter Type OD mm Pressure bar Min. bend Weight

Code radius
DN inch mm Wire Cover working burst mm kg/m
C25-10 16 5/8 15.9 2 braid 23.0 25.2 280 1120 170 0.80
C25-12 19 3/4 19.0 2 braid 26.2 29.1 250 1000 200 1.00
C25-16 25 1 25.4 2 braid 32.9 35.6 250 1000 250 1.30
C25-20 31 1 1/4 32.2 4 spiral 43.9 47.0 250 1000 350 2.70
C25-24 38 1/2 38.5 4 spiral 48.8 53.5 250 1000 450 3.20

This page is part of a complete catalogue containing technical and safety data. 25
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 PC28PS
HYDRAULIC HOSES

ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic rubber, resistant Isobaric (constant 275 bar working pressure Meets or exceeds SAE J 517 (100 R12) for
to oil across all sizes) hose for hydraulic fluids such as impulse requirements
mineral and vegetable oils, aqueous emulsions, Meets or exceeds JIS K6349
Reinforcement: 4 spirals of high tensile steel water and inert gases Tested in accordance with SAE J517, EN856,
wire Prolonged usage with water or water based AS3791
fluids at temperatures above 70°C will allow
Cover: Utmost abrasion resistant UHWMPE over wire corrosion as a result of diffusion through the Approvals:
black synthetic rubber, resistant to oils, ozone inner liner MSHA Approval
and weathering Improved bending radius for underground AS2660 test requirements
drilling machines
FRAS AS1180.10B & 13A
RUBBER HOSE

Cover loss by abrasion when tested in

Temperature Range:
accordance with ISO 6945 is 0.0 gram after Hose Tails:
-40°C up to +100°C mineral oil
2,000 cycles Pirtek ‘J’ Series 1/2”, 3/4”, 1”
-40°C up to +70°C water based fluids
(Refer Pirtek for current Fitting Series)
0°C up to +70°C water
-40°C up to 70°C air

Comment:
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information.

Lay line example: White text on black hose. Note Comment above

PIRTEK PC28PS 25mm (1”) PC28PS-16 280 BAR (4,060 PSI) W.P. MSHA FRAS ULTRA HIGH ABRASION RESISTANT

Product Nominal Diameter Type OD mm Pressure bar Min. bend Weight

Code radius
DN ins mm Wire Cover working burst mm kg/m
PC28PS-08 13 1/2 12.7 4 spiral 20.0 23.0 280 1120 110 0.78
PC28PS-12 19 3/4 19.0 4 spiral 27.0 29.9 280 1120 170 1.13
PC28PS-16 25 1 25.4 4 spiral 33.9 36.8 280 1120 220 1.86

26 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
C35

HYDRAULIC HOSES
ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic rubber, resistant Isobaric (constant 350 bar working pressure Meets or exceeds SAE J 517 (100 R12, R13 or
to oil across all sizes) hose for hydraulic fluids such as R16)
mineral and vegetable oils, aqueous emulsions, Meets or exceeds EN 857 2SC
Reinforcement: Two braids of high tensile steel water and inert gases Tested in accordance with SAE J 517, EN856,
wire, or 4-6 spirals of high tensile steel wire Prolonged usage with water or water based AS3791
fluids at temperatures above 70°C will allow
Cover: Abrasion resistant black synthetic rubber wire corrosion as a result of diffusion through the Approvals:
resistant to oils, ozone and weathering. (PVC inner liner MSHA
Nitrile rubber on braided hoses) Temperature Range: FRAS AS1180.10B & 13A
Spiral hoses:

RUBBER HOSE
Comment: -40°C up to +120°C mineral oil Hose Tails:
Lay line example may not be a true indication -40°C up to +70°C water based fluids Pirtek ‘K’ Series to 5/8”
of current status. Refer Pirtek for current 0°C up to +70°C water Pirtek ‘J’ Series 3/4”, 1”
information. -40°C up to 70°C air Pirtek ‘X’ Series 1”, 1 1/4”, 1 1/2”,2”
Braided hoses: Interlock option 3/4” and above
-40°C up to +100°C mineral oil
-40°C up to +60°C water based fluids
0°C up to +60°C water
-40°C up to 70°C ambient

Lay line example: White text on braided hoses. Red text on spiral hoses. Note Comment above
PIRTEK CLASS 35 9.5mm (3/8”) C35-06 350 BAR (5000 PSI) MSHA IC-104/1 ABRASION RESISTANT

Product Nominal Diameter Type OD mm Pressure bar Min. bend Weight

Code radius
DN inch mm Wire Cover working burst mm kg/m
C35-05 8 5/16 7.9 2 braid 13.0 14.7 380 1520 85 0.34
C35-06 10 3/8 9.5 2 braid 15.3 17.2 350 1400 90 0.42
C35-08 12 1/2 12.7 2 braid 20.1 22.2 350 1400 130 0.62
C35-10 † 16 5/8 16.1 4 spiral 23.7 27.4 350 1400 200 1.00
C35-12 19 3/4 19.2 4 spiral 28.1 30.7 350 1400 220 1.50
C35-16 25 1 25.6 4 spiral 35.6 38.7 350 1400 280 2.20
C35-20 31 1 1/4 32.2 6 spiral 45.6 48.7 350 1400 380 3.70
C35-24 38 1 1/2 38.5 6 spiral 52.5 55.6 350 1400 480 4.40
C35-32 51 2 51.2 6 spiral 68.1 71.1 350 1400 600 6.90
† Meets or exceeds SAE100 R12 except for reinforcement OD

This page is part of a complete catalogue containing technical and safety data. 27
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 C42
HYDRAULIC HOSES

ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic rubber, resistant Isobaric (constant 420 bar working pressure Tested in accordance with SAE J517, EN856,
to oil across all sizes) hose for hydraulic fluids such as AS3791
mineral and vegetable oils, aqueous emulsions, Approvals:
Reinforcement: Two braids of high tensile steel water and inert gases MSHA
wire (C42-04), or 4-6 spirals of high tensile steel Prolonged usage with water or water based FRAS AS1180.10B & 13A
wire fluids at temperatures above 70°C will allow
wire corrosion as a result of diffusion through the Impulse Testing:
Cover: Abrasion resistant black synthetic rubber inner liner Braided hoses as per SAE 100 R16
resistant to oils, ozone and weathering (PVC Spiral hoses as per SAE 100 R12, R15
nitrile rubber on braided hoses) Temperature Range: C42EH 2 Million Cycles applicable only in
RUBBER HOSE

Spiral hoses: conjunction with EH Series interlock tails

Comment: -40°C up to +120°C mineral oil
Lay line example may not be a true indication -40°C up to +70°C water based fluids Hose Tails:
of current status. Refer Pirtek for current 0°C up to +70°C water Pirtek ‘K’ Series to 1/2”
information. -40°C up to 70°C air Pirtek ‘J’ Series 3/8” and 1/2”
Braided hoses: Pirtek ‘H’ Series 3/4”
-40°C up to +100°C mineral oil Pirtek ‘X’ Series 3/4”, 1”
-40°C up to +60°C water based fluids Interlock 1” to 1.1/2”
0°C up to +60°C water Special Interlock for C42EH-32
-40°C up to 70°C ambient

Lay line example: White text on braided hoses. Yellow text on spiral hoses. Note Comment above
PIRTEK CLASS 42 19 mm (3/4”) C42-12 420 BAR (6,000 PSI) WORK.PRESS. MSHA IC-104/1 ABRASION RESISTANT

PIRTEK CLASS 42 SERIES EH 50MM (2”) C42EH-32 420 BAR (6,000 PSI) EN856 MSHA IC-8/13 1Q09

Product Min. bend

Code Nominal Diameter OD mm Pressure bar Weight
Type radius
DN inch mm Wire Cover working burst mm kg/m
C42-04 6 1/4 6.4 2 braid 12.7 14.9 420 1680 75 0.40
C42-06 10 3/8 9.7 4 spiral 17.2 20.2 420 1680 125 0.70
C42-08 12 1/2 12.9 4 spiral 20.7 23.8 420 1680 180 0.90
C42-10 16 5/8” 16.0 4 spiral 24.4 26.4 420 1680 140 1.00
C42-12 19 3/4 19.2 4 spiral 28.1 32.0 420 1680 280 1.50
C42-16 25 1 25.7 4 spiral 35.1 38.2 420 1680 300 2.20
C42-20 31 1 1/4 32.2 6 spiral 46.8 49.8 420 1680 400 3.90
C42-24 38 1 1/2 38.5 6 spiral 54.0 57.2 420 1680 500 4.70
C42-32 51 2 51.2 6 spiral 70.6 75.0 420 1680 600 7.92
C42EH-20 31 1 1/4 32.2 6 spiral 46.8 49.4 420 1680 420 3.48
C42EH-24 38 1 1/2 38.5 6 spiral 53.4 57.3 420 1680 500 4.63
C42EH-32 51 2 51.2 6 spiral 67.3 71.6 420 1680 630 6.70

28 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
PC25

HYDRAULIC HOSES
PIRTEK CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Isobaric (constant 250 bar working pressure Tested in accordance with performance
Seamless synthetic rubber, oil resistant across all sizes) hose for hydraulic fluids such as specifications:
mineral oils, aqueous emulsions, water, air and SAE 100R16 (braided hose)
Reinforcement: inert gases SAE 100R12 (spiral hose)
Two braids, or 4 spirals of high tensile steel wire Excellent compact bend radius Approvals:
Temperature Range: AS2660 test requirements-
Cover: Spiral hoses: AS1180.10B and AS1180.13A (FRAS)
High abrasion resistance black synthetic rubber -40°C up to +120°C mineral oil MSHA
resistant to oils, ozone and weathering -40°C up to +70°C water based fluids Prolonged usage with water or water based
0°C up to +70°C water fluids at temperatures above 70°C will allow

RUBBER HOSE
-40°C up to 70°C air wire corrosion as a result of diffusion through the
Braided Hoses: inner liner
-40°C up to +100°C mineral oil Hose Tails:
-40°C up to +60°C water based fluids Pirtek ‘K’ Series to 5/8”
0°C up to +60°C water Pirtek ‘J’ Series 3/4”, 1”
-40°C up to 70°C ambient Pirtek ‘J’ or ‘X’ Series 1 1/4”, 1 1/2”
Comment:
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information.

Lay line example: White text on black background. Note Comment above
PIRTEK PC25-12 19.1MM (3/4”) 250 BAR (3625 PSI) W.P. FRAS ABRASION RESISTANT

Product Nominal Diameter Reinforce- OD Pressure bar Min. bend Weight

Code ment (mm) radius
DN inch mm W.P. Min. Burst mm Kg/m
PC25-10 16 5/8 15.9 2 braid 26.0 250 1000 140 0.84
PC25-12 20 3/4 19.1 2 braid 29.1 250 1000 170 0.96
PC25-20 32 1 1/4 31.8 4 spiral 44.9 250 1000 280 2.36
PC25-24 40 1/2 38.1 4 spiral 52.4 250 1000 330 3.06

This page is part of a complete catalogue containing technical and safety data. 29
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 PC35
HYDRAULIC HOSES

PIRTEK CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Isobaric (constant 350 bar working pressure Tested in accordance with performance
Seamless synthetic rubber, oil resistant across all sizes) hose for hydraulic fluids such as specifications:
mineral oils, aqueous emulsions, water, air and SAE R16 (braided hose)
Reinforcement: inert gases SAE 100 R12 (spiral hose)
Two braids, 4spirals or 6 spirals of high tensile Excellent compact bend radius SAE 100 R13 / R15 (spiral hose)
steel wire Temperature Range: Approvals:
Spiral hoses: AS2660 test requirements-
Cover: -40°C up to +120°C mineral oil AS1180.10B and AS1180.13A (FRAS)
High abrasion resistant black synthetic rubber -40°C up to +70°C water based fluids MSHA
resistant to oils, ozone and weathering 0°C up to +70°C water Prolonged usage with water or water based
RUBBER HOSE

-40°C up to +70°C ambient fluids at temperatures above 70°C will allow

Braided hoses: wire corrosion as a result of diffusion through the
-40°C up to +100°C mineral oil inner liner
-40°C up to +60°C water based fluids
0°C up to +60°C water Hose Tails:
-40°C up to 70°C ambient Pirtek ‘K’ Series to 5/8”
Comment: Pirtek ‘J’ Series 3/8” to 1”
Lay line example may not be a true indication Pirtek ‘X’ Series 1” to 2”
of current status. Refer Pirtek for current Pirtek Interlock Series 3/4” to 1.1/2”
information.

Lay line example: White text on black background. Note Comment above
PIRTEK CLASS PC35-12 19.1MM (3/4”) 350 BAR (5076 PSI) FRAS ABRASION RESISTANT

Product Nominal Diameter Reinforce- O.D. Pressure bar Min. bend Weight
Code ment mm radius
DN inch mm W.P. Min. Burst mm Kg/m
PC35-06 10 3/8 9.5 2 braids 18.9 350 1400 90 0.55
PC35-08 13 1/2 12.7 4 spirals 22.2 350 1400 110 0.80
PC35-10 16 5/8 15.9 4 spirals 26.4 350 1400 140 1.00
PC35-12 20 3/4 19.1 4 spirals 29.0 350 1400 170 1.13
PC35-16 25 1 25.4 4 spirals 36.6 350 1400 220 2.00
PC35-20 32 1 1/4 31.8 6 spirals 48.7 350 1400 280 3.80
PC35-24 40 1 1/2 38.1 6 spirals 55.6 350 1400 330 4.60

30 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
PC42

HYDRAULIC HOSES
PIRTEK CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Isobaric (constant 420 bar working pressure Tested in accordance with performance
Seamless synthetic rubber, oil resistant across all sizes) hose for hydraulic fluids such as specifications:
mineral oils, aqueous emulsions, water, air and SAE 100 R16 (braided hose)
Reinforcement: inert gases SAE 100 R15 (spiral hose)
Two braids of high tensile steel wire Excellent compact bend radius Approvals:
Cover: Temperature Range: AS2660 test requirements-
High abrasion resistance black synthetic rubber Spiral hoses: AS1180.10B and AS1180.13A (FRAS)
resistant to oils, ozone and weathering -40°C up to +120°C mineral oil MSHA
-40°C up to +70°C water based fluids Prolonged usage with water or water based
0°C up to +70°C water fluids at temperatures above 70°C will allow

RUBBER HOSE
-40°C up to 70°C ambient wire corrosion as a result of diffusion through the
Braided hoses: inner liner.
-40°C up to +100°C mineral oil
-40°C up to +60°C water based fluids Hose Tails:
0°C up to +60°C water Pirtek ‘K’ Series
-40°C up to 70°C ambient Pirtek ‘H’, ‘X’, Interlock
Comment:
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information.

Lay line example: White text on black background. Note Comment above
PIRTEK CLASS PC42-04 6.4 MM (1/4”) 420 BAR (6091 PSI) FRAS ABRASION RESISTANT

Product Min. bend

Code Nominal Diameter Reinforce- OD Pressure (bar) Weight
radius
ment (mm)
DN inch mm W.P. Min. Burst mm Kg/m
PC42-04 6 1/4 6.4 2 braids 14.9 420 1680 70 0.39
PC42-24 40 1.1/2 38.1 6 spirals 55.6 420 1680 330 4.60

This page is part of a complete catalogue containing technical and safety data. 31
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 C45
HYDRAULIC HOSES

ISOBARIC CLASS HOSE

Construction Applications Reference Specifications

Inner Tube: Synthetic rubber, resistant to oil High pressure hose for hydraulic fluids such as Tested in accordance with performance
mineral oils, aqueous emulsions, vegetable oils, specifications:
Reinforcement: 4 spirals of high tensile steel water, air and inert gases. DIN EN 856 4SH
wire Especially used for “Dynapac” style rollers.
NOTE: THIS HOSE MUST ONLY BE USED FOR Approvals:
Cover: Abrasion resistant black synthetic rubber STATIC APPLICATIONS – Not recommended for MSHA
resistant to oils, ozone and weathering. impulsing applications
Hose Tails:
Temperature Range: Pirtek ‘B’ Series
-40°C up to +100°C mineral oil (2-piece system requires a separate
RUBBER HOSE

-40°C up to +60°C water based fluids SFB ferrule)

0°C up to +60°C water
-40°C up to +70°C ambient
Comment:
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information.

Lay line example: Orange text on black background. Note Comment above
PIRTEK CLASS 45 C45-10 15.9mm (5/8”) 450 BAR (6500 PSI) MSHA

Product Nominal Diameter Reinforcement O.D. Pressure bar Min. bend Weight
Code Cover radius
DN inch mm mm working burst mm kg/m
C45-10 16 5/8 15.9 4 spiral 28.5 450 1800 250 1.30

32 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
JBF

HYDRAULIC HOSES
LARGE BORE HOSE

Construction Applications Reference Specifications

Inner Tube: Seamless synthetic Medium pressure hose for hydraulic fluids SAE J517 except for reinforcement OD
rubber, resistant. to oil such as mineral and vegetable oils, aqueous
emulsions and water Approvals:
Reinforcement: Four spirals of high MSHA
tensile steel wire. Prolonged usage with water or water based FRAS AS1180.10B & 13A
fluids at temperatures above 70°C will allow
Cover: Abrasion resistant black synthetic rubber wire corrosion as a result of diffusion through the Hose Tails:
resistant to oils, ozone and weathering inner liner Pirtek ‘BSMS’ & J Series

Temperature Range:

RUBBER HOSE
-40°C up to +100°C mineral oil
-40°C up to +70°C water based fluids
0°C up to +70°C water
-40°C up to 70°C air / ambient

Comment:
Lay line example may not be a true
indication of current status. Refer Pirtek for
current information.

Lay line example: Light yellow text on black hose. Note Comment above
PIRTEK JUMBO ACE 63mm (2 1/2”) JBF-40 140 BAR (2030 PSI) WP MSHA IC/104/1 FRAS ABRASION RESISTANT

Min. bend
Product Nominal Diameter OD mm Pressure bar Weight
Type radius
Code
DN inch mm Wire Cover working burst mm kg/m
JBF-40 63 2.1/2 63.5 4 spiral 76.8 82.4 140 560 660 5.5

This page is part of a complete catalogue containing technical and safety data. 33
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 LPG
HYDRAULIC HOSES

LP GAS AS1869 CLASS D

Construction Applications Reference Specifications

Inner Tube: High pressure hose for transfer of natural Meets and / or exceeds:
Conductive Teflon® gas, town gas, LPG, and butane-propane on AS1869 Class D
stationary and mobile LPG gas engines. Ideal Very low extractables and permeation rate.
Reinforcement: for forklift, automotive, light & medium duty truck Approvals:
Single braid of stainless steel wire and transfer AGA (Aust. Gas Association)
Cover: Temperature Range:
Black and blue fire retardant, abrasion resistant -20°C up to +125°C Hose Tails:
aramid polyester Comment: Pirtek ‘G’ Series
Lay line example may not be a true indication Special procedures apply using dedicated
of current status. Refer Pirtek for current dies and spacers.
RUBBER HOSE

information. Thermoplastic tag required on all hose

assemblies.

Lay line example: Hose does not have layline. Note Comment above

Product Min. bend

Code Nominal Diameter Reinforce- OD Pressure (bar) Weight
radius
ment (mm)
DN inch mm W.P. Min. Burst mm Kg/m
LPG-06 10 5/16 7.9 1 wire braid 13.6 26 104 101.6 0.18
LPG-10† 16 1/2 12.7 1 wire braid 19.1 26 104 165.1 0.27
† Limited stock available

34 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
R12C

HYDRAULIC HOSES
SPIRAL SAE100 R12 HOSE

Construction Applications Reference Specifications

Inner Tube: Fabric reinforced synthetic rubber, High pressure hose for hydraulic fluids such as SAE J 517 (100 R12)
resistant to oil glycol, mineral oils, fuels, hydrocarbons etc. EN 856 R12
Designed for applications where flexibility and
Reinforcement: Four spirals of high tensile steel high temperature resistance are required. Approvals:
wire separated by layers of synthetic rubber Compatible with Caterpillar® reusable fittings. MSHA
Cover: Black synthetic rubber resistant to
abrasion, oils, ozone and weathering Temperature Range: Hose Tails:
-40°C up to +121°C mineral oil Pirtek ‘K’ Series to 5/8”
Pirtek ‘J’ or ‘X’ Series 3/4” upwards
Comment: Caterpillar® re-useable

RUBBER HOSE
Lay line example may not be a true indication
of current status. Refer Pirtek for current
information

Lay line example: Yellow text on black hose. Note Comment above
XT® Technology SAE 100R12 ¾” Max WP 4000psi MSHA IC-101/10 Made in USA

Min. Bend
Product Nominal Diameter OD mm Pressure bar Weight
Type Radius
Code
DN inch mm Wire Cover working burst mm kg/m
R12C-06 10 3/8 9.5 4 spiral 17.2 20.2 276 1104 64 0.70
R12C-08 12 1/2 13 4 spiral 20.7 23.8 276 1104 89 0.83
R12C-10 16 5/8 16 4 spiral 24.6 27.2 276 1104 102 1.20
R12C-12 19 3/4 19 4 spiral 27.6 30.7 276 1104 121 1.43
R12C-16 25 1 25 4 spiral 34.9 38 276 1104 153 2.00
R12C-20 31 1.1/4 32 4 spiral 43.9 47 207 828 210 2.80
R12C-24 38 1.1/2 38 4 spiral 50.4 53.4 172 688 254 3.40
R12C-32 51 2 51 4 spiral 63.6 66.7 172 688 318 4.25

This page is part of a complete catalogue containing technical and safety data. 35
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 R13C
HYDRAULIC HOSES

SPIRAL SAE100 R13 HOSE

Construction Applications Reference Specifications

Inner Tube: Fabric reinforced synthetic rubber, Very high pressure hose for hydraulic fluids such SAE J 517 (100 R13)
resistant to oil as glycol, mineral oils, fuels, hydrocarbons etc. EN 856 R13
Reinforcement: Four or six spirals of high Specifically designed for applications where
tensile steel wire separed by layers of synthetic high pulsating pressure, flexibility and high Approvals:
rubber temperature resistance are required. Compatible MSHA
Cover: Black synthetic rubber resistant to with Caterpillar® reusable fittings
abrasion, oils, ozone and weathering.
Temperature Range: Hose Tails:
-40°C up to +121°C mineral oil Pirtek ‘X’ Series all sizes
Interlock option 1 1/4” upwards
RUBBER HOSE

Comment: Caterpillar® re-useable

Lay line example may not be a true indication
of current status. Refer Pirtek for current
information

Lay line example: Red text on black hose. Note Comment above
XT® Technology SAE 100R13 1” Max WP 5000psi MSHA IC-101/10 Made in USA

Min. Bend
Product Nominal Diameter OD mm Pressure bar Weight
Type Radius
Code
DN inch mm Wire Cover working burst mm kg/m
R13C-12 19 3/4 19 4 spiral 29.0 32.1 345 1380 141 1.75
R13C-16 25 1 25 4 spiral 35.6 38.7 345 1380 153 2.30
R13C-20 31 1.1/4 32 6 spiral 46.8 49.8 345 1380 210 3.70
R13C-24 38 1.1/2 38 6 spiral 54.3 57.3 345 1380 254 4.65
R13C-32 51 2 51 6 spiral 68.1 71.1 345 1380 318 6.90

36 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
 PE2 PIRTEK

HYDRAULIC HOSES
ENDURANCE SERIES
2 WIRE BRAID HYBRID HOSE

Construction Applications Reference Specifications

Inner Tube: Extremely high pressure compact hose with Exceeds SAE 100R16 & EN 857 2SC
Black synthetic rubber, resistant to oils greater flexability, suitable for mineral and MSHA approved
vegetable oils, aqueous emulsions, water, air FRAS ( Fire Resistant Anti Static )
and inert gases. Recommended for hydraulic
applications where high pressure and a tighter
bend radius is needed. Cover must be pin
pricked if hose is to be used to convey air above
17 Bar.
Reinforcement: Temperature Range:
Two high tensile steel braids -40ºC up to 100ºC (125ºC discontinuous) mineral & vegetable oils

RUBBER HOSE
-40ºC up to 70ºC water based fluids
0ºC up to 70ºC water & air -
-40ºC up to 70ºC external ambient
Prolonged usage with water or water based fluids at temperatures above 70ºC will allow wire
corrosion as a result of diffusion through the inner tube.

Cover: Comment: Hose Tails:

Black, smooth synthetic rubber, resistant to oils, Lay line example may not be a true indication Pirtek ‘K’ series up to 5/8”
abrasion and weather conditions of current status. Refer Pirtek for current Pirtek ‘J’ series 3/4”, 1”
information

Layline example: White text on black background

PIRTEK® ENDURANCE SERIES PE239-06 3/8” (9.5mm) 5656 PSI (390 BAR) W.P K MSHA FRAS 4Q18

Min. Bend
Product Nominal Diameter OD (avg) Pressure bar Weight
Radius
Code
DN inch mm mm W.P Min. Burst mm Kg/mtr
PE245-04 6 1/4 6.4 13.1 450 1800 45 0.30
PE239-06 10 3/8 9.5 16.5 390 1560 70 0.38
PE235-08 13 1/2 12.7 20.1 350 1400 90 0.55
PE229-10 16 5/8 15.9 23.6 290 1160 130 0.63
PE228-12 20 3/4 19.1 27.5 280 1120 160 0.80
PE225-16 25 1 25.4 35.6 250 1000 250 1.30

This page is part of a complete catalogue containing technical and safety data. 37
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 PE4_6 PIRTEK
HYDRAULIC HOSES

ENDURANCE SERIES
350 BAR & 420 BAR
4 & 6 WIRE SPIRAL HOSE

Construction Applications Reference Specifications

Inner Tube: Extremely high pressure hose with high Exceeds SAE 100R13 (350 Bar)
Black synthetic rubber, resistant to oils performance and half bend radius of SAE Exceeds SAE 100R15 (420 bar)
100R13 & R15 hoses. MSHA approved
Higher flexibility compared with conventional. FRAS ( Fire Resistant Anti Static )
spiral hoses. Suitable for mineral and vegetable
oils, aqueous emulsions, water, air and inert
gases.
Cover must be pin pricked if hose is to be used
to convey air above 17 Bar.
Reinforcement: Temperature Range:
RUBBER HOSE

350 Bar = Four high tensile steel spirals up to -40ºC up to 121ºC (125ºC discontinuous) mineral & vegetable oils
-20, six spirals -24 -40ºC up to 70ºC water based fluids
420 Bar = Four high tensile steel spirals up to 0ºC up to 70ºC water & air
-16, six spirals -20 & -24 -40ºC up to 70ºC external ambient
Prolonged usage with water or water based fluids at temperatures above 70ºC will allow wire
corrosion as a result of diffusion through the inner tube.

Cover: Hose Tails:

Black, smooth synthetic rubber, resistant to oils, 350 Bar = Pirtek ‘J’ series up to 1.1/4”, ‘H’ series
abrasion and weather conditions for 1.1/2”
420 Bar = Pirtek ‘J’series up to 1” & ‘H’ series
1.1/4” & 1.1/2”
Layline example: White text on black background
PIRTEK® ENDURANCE SERIES PE442-16 1” (25.4mm) 6091 PSI (420 BAR) W.P J MSHA FRAS 4Q18

Min. Bend
Product Nominal Diameter OD (avg) Pressure bar Weight
Radius
Code
DN inch mm mm W.P Min. Burst mm Kg/mtr
PE435-20 31 1.1/4 31.8 44.8 350 1400 210 2.4
PE442-06 10 3/8 9.5 20 420 1680 65 0.65
PE442-08 13 1/2 12.7 23 420 1680 90 0.85
PE442-12 20 3/4 19.1 30.6 420 1680 120 1.50
PE442-16 25 1 25.4 37.8 420 1680 150 2.00
PE642-20 31 1.1/4 31.8 49.3 420 1680 300 3.55
PE642-24 38 1.1/2 38.1 57 420 1680 350 4.65

38 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
WB SERIES

HYDRAULIC HOSES
WATERBLAST HOSE

Construction Applications Reference Specifications

Inner Tube: Very high constant pressure hose for water and AS/NZS 4233.2
Synthetic rubber. water emulsions scaling systems.
Reinforcement: Temperature Range:
Four spirals of high tensile steel wires -40°C up to +80°C
Six spirals of high tensile steel wires for WB3

Cover: Comment: Hose Tails:

Black synthetic rubber, extreamly resistant Layline example may not be a true indication WBI series hose tails
to abrasion, oils and weathering. of current status. Refer Pirtek for current IFSWB series ferrules
information.

RUBBER HOSE
Layline example: Embossed into outer cover. Note Comment above.
HFH Power Jet 2 intertraco WB2 DN12 1/2” Max Working Pressure 1100 BAR 16000 PSI

"Min. bend
"Product Nominal ID OD mm Pressure Bar Weight
radius"
Code"
DN Inch mm Wire Cover Working Min. Burst mm Kg/mtr
WB2-08 12 1/2" 12.7 22.2 24.6 1100 2750 230 1.24
WB2-12 19 3/4" 19.1 29.0 32.0 1000 2500 250 1.87
WB3-08 12 1/2" 12.7 25.9 29.0 1450 3625 250 1.87

This page is part of a complete catalogue containing technical and safety data. 39
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TPHC ( Replaces 4523 )
HYDRAULIC HOSES

HAND CUTTER
SUIT AUTO, AIR CON HOSES, THERMOPLASTIC, NYLON & FABRIC BRAID RUBBER
& PVC HOSE
Hand Cutting Tool
Product Code Description
TPHC-001 Hand Cutter for Hose and Tube - Up to 28mm External Diameter.
TPHCRB-001 Replacement Blade for Hand Cutter.
• A robustly made hand cutting tool for cleanly cutting a wide range of hose and tube products
• Replaceable blade
RUBBER HOSE

40 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
PSH

HYDRAULIC HOSES
POWER STEERING HOSE

Construction Applications
Inner Tube: Synthetic rubber Power steering hose.
Ideal alternative to wire braid hose as it
eliminates vibration & harmonics seen through
the steering column as identified with some
modern cars.
Reinforcement: Temperature Range: Hose Tails: Pirtek ‘K’ Series
Double textile braid -40ºC to +100ºC
Cover: Comment:
Black, synthetic rubber Lay line example may not be a true indication
of current status. Refer Pirtek for current

RUBBER HOSE
information

Lay line example: White text on black hose.

PIRTEK POWER STEERING PSH-06 3/8” (9.5MM) 1125 PSI 78 BAR W.P

Min bend Weight

Product Nominal ID OD ( avg) Pressure bar
radius
Code
DN inch mm mm working min burst mm Kg/mtr
PSH-06 10 3/8 9.5 19.3 78 310 101.6 0.3

This page is part of a complete catalogue containing technical and safety data. 41
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 30CT
HYDRAULIC HOSES

BROAD SPECTRUM HOSE

Construction Applications Reference Specifications

Inner Tube: Flexible even in cold temperatures. Small outside Exceeds SAE J517 (R18)
composite wall dual extrusion smooth seamless diameter and good flexibility over sheaves SAE J343 Test procedures
polymeric (polyester) inner and polyurethane allows use over a wide range of forklift sheaves, ASTM D-380 Testing Rubber hoses
adjacent including freezer applications. ASTM D-622 Testing for Automotive Brake
Other applications include construction, general Systems
hydraulics, chemical and gas transfer, machine
tools, agricultural equipment etc
Reinforcement: Temperature Range: Impulse Testing:
braided synthetic fibre in either single or dual -54°C up to +94°C for hydraulic fluids Hoses are tested to withstand 200 000 impulse
THERMOPLASTIC HOSE

layer -54°C up to +66°C for water based and fire cycles (hose only) at 133% WP
resistant fluids Volumetric Expansion:
Typically 10 cc per metre for 1/4” at WP
 20cc per metre for 1/2” at WP
Consult Pirtek for details
Cover: Comment: Hand Cutter:
black non stick perforated polymeric (polyester) Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
bonded to the reinforcement of current status. Refer Pirtek for current work of cutting Synflex hoses
information Hose Tails:
Pirtek ‘S7’ or ‘S18’ Series
(refer Table for Die)
Pirtek ‘T’ Series option

Lay line example: White text on black hose. Note Comment above
SYNFLEX® 30CT-06 SAE 100R18 3/8” W.P 3000 P.S.I. (207 BAR) SAINT-GOBAIN

Min bend Synflex Die and Hose

Product Nominal ID OD Pressure bar Weight
radius Tail Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
30CT-04 6 1/4 6.4 12.1 207 828 32 8.9 3W4 S7
30CT-05 8 5/16 8 15.5 207 828 38 14.7 305 S7
30CT-06 10 3/8 9.5 16.8 207 828 51 18.2 306 S7
30CT-08 12 1/2 12.7 21.6 207 828 89 24.7 A0800 S7
30CT-10 16 5/8 16 27 207 828 102 41.4 N10 S18

42 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
3JET

HYDRAULIC HOSES
WATER JETTING HOSE

Construction Applications Reference Specifications

Inner Tube: Medium pressure hose for water jetting and drain ISO 7751
Smooth seamless thermoplastic (nylon) cleaning.
Low elongation
Reinforcement: Temperature Range: Hand Cutter:
Spiral or braided synthetic fibre -40°C up to +66°C water Hand Cutting Tool (see page 38) makes light
work of cutting Synflex hoses
Cover: Comment: Hose Tails:
Black, perforated bonded polyurethane Lay line example may not be a true indication Pirtek ‘S7’ series (refer below table for dies)
of current status. Refer Pirtek for current Pirtek ‘T’ series

THERMOPLASTIC HOSE
information

Lay line example: White text on black hose. Note Comment above
PIRTEK PIRJET 3JET-03 4.9mm (3/16”) 331 BAR (4800 PSI) WATER JETTING 04/13 / - / / -

Min bend Synflex Die and Hose Tail

Product Nominal ID OD Pressure bar Weight
radius Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3JET-03 5 3/16 4.9 10.8 331 827 19 6.8 303 S7
3JET-04 6 1/4 6.4 13.0 331 827 32 8.5 304 S7

This page is part of a complete catalogue containing technical and safety data. 43
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 30CTX2 / 30CTX3
HYDRAULIC HOSES

MULTI-LINE BROAD SPECTRUM HOSE

Construction Applications Reference Specifications

Inner Tube: Flexible even in cold temperatures. Small outside Exceeds SAE J517 (R18)
composite wall dual extrusion smooth seamless diameter and good flexibility over sheaves SAE J343 Test procedures
polymeric (polyester) inner and polyurethane allows use over a wide range of forklift sheaves, ASTM D-380 Testing Rubber hoses
adjacent including freezer applications. ASTM D-622 Testing for Automotive Brake
Other applications include construction, general Systems
hydraulics, chemical and gas transfer, machine
tools, agricultural equipment etc
Reinforcement: Temperature Range: Impulse Testing:
braided synthetic fibre in either single or dual -54°C up to +94°C for hydraulic fluids Hoses are tested to withstand 200 000 impulse
THERMOPLASTIC HOSE

layer -54°C up to +66°C for water based and fire cycles (hose only) at 133% WP
resistant fluids Volumetric Expansion:
Typically 10 cc per metre for 1/4” at WP
 20cc per metre for 1/2” at WP
Consult Pirtek for details
Cover: Comment: Hand Cutter:
black non stick perforated polymeric (polyester) Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
bonded to the reinforcement of current status. Refer Pirtek for current work of cutting Synflex hoses
information Hose Tails:
Pirtek ‘S7’ or ‘S18’ Series
(refer Table for Die)
Pirtek ‘T’ Series option

Lay line example: White text on black hose. Note Comment above
SYNFLEX® 30CT-06 SAE 100R18 3/8” W.P 3000 P.S.I. (207 BAR) SAINT-GOBAIN

Synflex Die and

No. of Min bend
Product Nominal ID OD Pressure bar Weight Hose Tail
Lines radius
Code Combination
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
30CTX2-04 2 6 1/4 6.4 12.1 207 828 32 8.9 3W4 S7
30CTX2-05 2 8 5/16 8 15.5 207 828 38 14.7 305 S7
30CTX2-06 2 10 3/8 905 16.8 207 828 51 18.2 306 S7
30CTX2-08 2 12 1/2 12.7 21.6 207 828 89 24.7 A0800 S7
30CTX2-10 † 2 16 5/8 16 27.0 207 828 102 41.4 N10 S18
SPECTRA 30CT TRI-LINE
30CTX3-05 † 3 8 5/16 8 15.5 207 828 38 24.1 305 S7
† Non-standard product. Available to special order

44 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
3130

HYDRAULIC HOSES
MEDIUM PRESSURE HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulics, high pressure gas transfer, SAE J517 (R7)
smooth seamless thermoplastic (nylon) chemical transfer. Low elongation, best value SAE J343
100R7 hose. ASTM D-380
Not for use over pulleys. ASTM D-622
Absorbs shock loads and damaging pressure
spikes through controlled expansion.

Reinforcement: Temperature Range: Impulse Testing:

spiralled or braided synthetic -40°C up to +100°C Hoses are tested to withstand 200 000 impulse

THERMOPLASTIC HOSE
Max 66°C with water-based or fire resistant fluids cycles (hose only) at 133% WP
Cover: Comment: Hand Cutter:
Perforated bonded black polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information
Hose Tails:
Pirtek ‘S7’ Series (refer Table for Die)
Pirtek ‘T’ Series option

Lay line example: White text on black hose. Note Comment above
SYNFLEX® 3130-06 SAE 100R73/8” W.P 2250 P.S.I. (155 BAR) SAINT-GOBAIN

Min bend Synflex Die and Hose

Product Nominal ID OD Pressure bar Weight
radius Tail Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3130-02 3 1/8 3.2 8.5 172 689 13 3.87 302 S7
3130-03 5 3/16 5 10.8 207 827 19 6.70 303 S7
3130-04 6 1/4 6.4 13.0 207 827 32 9.08 304 S7
3130-05 8 5/16 8 15.1 172 689 45 11.16 305 S7
3130-06 10 3/8 9.5 17.0 155 620 51 12.5 306 S7
3130-08 12 1/2 12.7 20.7 138 552 76.2 16.97 308 S7
3130-12 20 3/4 19 27.1 86 345 127 26.19 312 S7
3130-16 25 1 25.4 34.0 69 276 203 46.28 316 S7

This page is part of a complete catalogue containing technical and safety data. 45
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 3360X2
HYDRAULIC HOSES

TWIN-LINE FOR FORKLIFTS

Construction Applications Reference Specifications

Inner Tube: Flexible even in cold temperatures. SAE 100R17
Nylon Small outside diameter and good flexibility over
sheaves allows use over a wide range of forklift Impulse Testing:
sheaves, including freezer applications. Hoses are tested to withstand 200 000 impulse
Other applications include construction, general cycles (hose only) at 133% WP
hydraulics, chemical and gas transfer, machine
tools, agricultural equipment etc.
Reinforcement: Temperature Range: Volumetric Expansion (per line):
braided synthetic fibre -54°C up to +94°C for hydraulic fluids Typically 10 cc per metre for 1/4” at WP
THERMOPLASTIC HOSE

-54°C up to +66°C for water based and fire 20cc per metre for 1/2” at WP
resistant fluids Consult Pirtek for details
Hand Cutter:
Hand Cutting Tool (see page 38) makes light
work of cutting Synflex hoses
Cover: Comment: Hose Tails:
black non stick perforated polymeric (polyester) Lay line example may not be a true indication Pirtek ‘S8’ (refer Table for Die)
of current status. Refer Pirtek for current Pirtek ‘200/SN8’ Series option
information

Lay line example: White text on black hose. Each line is branded as though a single line. Note Comment above
SYNFLEX® 3360-06 SAE 100R17 3/8” W.P 3000 P.S.I. (207 BAR) SAINT-GOBAIN

Min bend Synflex Die and Hose Tail

Product Nominal ID OD Pressure bar Weight
radius Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3360X2-06 † 9.5 3/8 10 18.4 207 828 51 56.8 J06N S8

† Please note that this hose is available on an indent only basis

46 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
37AL

HYDRAULIC HOSES
NON-CONDUCTIVE HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems that may contact high ANSI A92.2 for Vehicle Mounted Aerial Devices
polyester core tube voltage sources. SAE J517 Non-conductive hose
Aerial equipment Construction
Mobile hydraulics SAE 100R7
Rescue apparatus and tools
Reinforcement: Temperature Range: Features:
braided synthetic fibre -54°C up to +100°C SAE J517 non conductive hose construction.
except max. 60°C with water based or fire Less than 50 microamperes leakage when
resistant fluids subjected to 75,000 volts/foot for 5 minutes.
Flexible at low temperatures

THERMOPLASTIC HOSE
Abrasion resistant cover

Impulse Testing:
Hoses are tested to withstand 200 000 impulse
cycles (hose only) at 133% WP
Cover: Comment: Hand Cutter:
orange non-perforated non stick polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information Hose Tails:
Pirtek ‘S7’ Series (refer Table for Die)
Pirtek ‘T’ Series option

Lay line example: Black text on orange hose. Note Comment above
SYNFLEX® 37AL-04 NON-CONDUCTIVE SAE 100R7 1/4” I.D. 2750 PSI W.P. (190 BAR) ANSI A92-2 3000 PSI W.P. (207 BAR). USE DIE 4540-3W400

Min bend Synflex Die and Hose

Nominal ID OD Pressure bar Weight
Product radius Tail Combination
Code working
DN inch mm mm min burst mm Kg/100m Die 4540- Series
ANSI R7
37AL-03 † 5 3/16 4.8 10.8 207 207 827 19 7.1 303 S7
37AL-04 6 1/4 6.4 12.3 207 190 759 32 8.9 3W4 S7
37AL-05 † 8 5/16 7.9 14.7 207 172 689 44 11.2 305 S7
37AL-06 10 3/8 9.5 16.1 207 155 620 51 14.1 306 S7
37AL-08 12 1/2 12.7 20.7 207 155 620 76 21.3 308 S7
† Non-standard product. Available to special order

This page is part of a complete catalogue containing technical and safety data. 47
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 37ALX2
HYDRAULIC HOSES

TWIN-LINE NON-CONDUCTIVE HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems that may contact high ANSI A92.2 for Vehicle Mounted Aerial Devices
polyester core tube voltage sources. SAE J517 Non-conductive hose
Aerial equipment Construction
Mobile hydraulics SAE 100R7
Rescue apparatus and tools
Reinforcement: Temperature Range: Features:
braided synthetic fibre -54°C up to +100°C SAE J517 non conductive hose construction.
except max. 60°C with water based or fire Less than 50 microamperes leakage when
resistant fluids subjected to 75,000 volts/foot for 5 minutes.
THERMOPLASTIC HOSE

Flexible at low temperatures

Abrasion resistant cover

Impulse Testing:
Hoses are tested to withstand 200 000 impulse
cycles (hose only) at 133% WP
Cover: Comment: Hand Cutter:
orange non-perforated non stick polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information Hose Tails:
Pirtek ‘S7’ Series (refer Table for Die)
Pirtek ‘T’ Series option

Lay line example: Black text on orange hose. Note Comment above
SYNFLEX® 37AL-04 NON-CONDUCTIVE SAE 100R7 1/4” I.D. 2750 PSI W.P. (190 BAR) ANSI A92-2 3000 PSI W.P. (207 BAR). USE DIE 4540-3W400

Min bend Synflex Die and Hose

Nominal ID OD Pressure bar Weight
Product radius Tail Combination
Code working
DN inch mm mm min burst mm Kg/100m Die 4540- Series
ANSI R7
37ALX2-04 6 1/4 6.4 12.3 207 190 759 32 17.8 3W4 S7
37ALX2-06 10 3/8 9.5 16.1 207 155 620 51 28.2 306 S7
37ALX2-08 12 1/2 12.7 20.7 207 155 620 76 42.6 308 S7

48 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
3800

HYDRAULIC HOSES
HIGH PRESSURE HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems SAE 100 R8 performance with SAE 100R7
nylon core tube High pressure gas and chemical transfer dimensions
Machine tools
Mobile equipment
Marine steering
Compatable with oxygen & breathing air mixtures
Reinforcement: Temperature Range: Impulse Testing:
braided high tensile aramid fibre (Kevlar) -40°C up to +100°C Hoses are tested to withstand 200 000 impulse
Max 66°C with water-based or fire resistant fluids cycles (hose only)
Cover: Comment: Hand Cutter:

THERMOPLASTIC HOSE
black perforated non stick polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information
Hose Tails:
Pirtek ‘S7’ Series (refer Table for Die)

Lay line example: White text on black hose. Note Comment above
SYNFLEX® 3800-04 SAE 100R81/4” W.P 5000 P.S.I. (345 BAR) SAINT-GOBAIN

Min bend Synflex Die and Hose

Product Nominal ID OD Pressure bar Weight
radius Tail Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3800-02 3 1/8 3.2 8.5 414 1656 20 4.0 302 S7
3800-03 5 3/16 4.8 11.0 345 1379 38 8.3 303 S7
3800-04 6 1/4 6.4 13.5 345 1379 51 11.8 304 S7
3800-06 10 3/8 9.5 16.9 276 1103 64 15.8 306 S7
3800-08 12 1/2 12.7 21.3 241 965 102 21.7 308 S7
3800X2-04 † 6 1/4 6.4 13.5 345 1379 51 23.6 304 S7
3800X2-06 † 10 3/8 9.5 16.9 276 1103 64 31.6 306 S7
3800X2-08 † 12 1/2 12.7 21.3 241 965 102 43.4 308 S7
† Non-stocked item. Available to special order

This page is part of a complete catalogue containing technical and safety data. 49
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 3E80
HYDRAULIC HOSES

NON-CONDUCTIVE HIGH PRESSURE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems that may contact high SAE 100 R8
smooth seamless nylon voltage sources. SAE J517 non-conductive construction
Aerial equipment.
Mobile hydraulics.
Rescue apparatus and tools
Reinforcement: Temperature Range: Features:
braided synthetic fibre -40°C up to +100°C SAE J517 non conductive hose construction.
Max 66°C with water-based or fire resistant fluids Less than 50 microamperes leakage when
subjected to 75,000 volts/foof for 5 minutes
THERMOPLASTIC HOSE

Impulse Testing:
Hoses are tested to withstand 200 000 impulse
cycles (hose only)
Cover: Comment: Hand Cutter:
Orange non stick non-perforated polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information
Hose Tails:
Pirtek ‘S8’ Series (refer Table for Die)

Lay line example: Black text on orange hose. Note Comment above
SYNFLEX® 3E80-06 SAE 100R8 3/8” W.P 4000 P.S.I. (276 BAR) NON CONDUCTIVE FURON

Min bend Synflex Die and Hose

Product Nominal ID OD Pressure bar Weight
radius Tail Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3E80-04 6 1/4 6.4 15.9 345 1379 51 17.6 H04 S8
3E80-06 10 3/8 9.5 19.5 276 1103 64 22.0 H06 S8
3E80-08 12 1/2 12.7 22.7 241 965 102 28.3 H08 S8

50 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
3R80

HYDRAULIC HOSES
HIGH PRESSURE HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems SAE 100 R8
smooth seamless nylon High pressure pneumatic systems
Machine tools
Mobile equipment
Mobile hydraulics
Compatable with oxygen & breathing air mixtures
Reinforcement: Temperature Range: Impulse Testing:
braided synthetic fibre -40°C up to +100°C Hoses are tested to withstand 200 000 impulse
Max 66°C with water-based or fire resistant fluids cycles (hose only)
Cover: Comment: Hand Cutter:

THERMOPLASTIC HOSE
black perforated non stick polyurethane Lay line example may not be a true indication Hand Cutting Tool (see page 36) makes light
of current status. Refer Pirtek for current work of cutting Synflex hoses
information
Hose Tails:
Pirtek ‘S8’ Series (refer Table for Die)

Lay line example: White text on black hose. Note Comment above
SYNFLEX® 3R80-08 SAE 100R8 1/2” W.P 3500 P.S.I. (241 BAR) SAINT GOBAIN

Min bend Synflex Die and Hose Tail

Product Nominal ID OD Pressure bar Weight
radius Combination
Code
DN inch mm mm working min burst mm Kg/100m Die 4540- Series
3R80-03 5 3/16 4.8 13.1 345 1379 38 11.5 H03 S8
3R80-04 6 1/4 6.4 15.9 345 1379 51 17.6 H04 S8
3R80-06 10 3/8 9.5 19.5 276 1103 64 22.0 H06 S8
3R80-08 12 1/2 12.7 22.7 241 965 102 28.3 H08 S8
3R80-12 19 3/4 19.1 28.9 155 620 165 38.1 H12 S8
3R80-16 25 1 25.4 37.4 138 552 254 57.3 H016 S8

This page is part of a complete catalogue containing technical and safety data. 51
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 3VEO
HYDRAULIC HOSES

NON-CONDUCTIVE JACKING HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems that may contact high Meets SAE 100 R8
smooth seamless nylon voltage sources. SAE J517 Non-Conductive Hose Construction
Aerial equipment.
Mobile hydraulics.
Rescue apparatus and tools.
Reinforcement: Temperature Range: Features:
spiralled high tensile aramid fibre (Kevlar) -40°C up to +66°C High WP 8000—10000 psi (551–689 bar)
Compact size with low elongation
Less than 50 microamperes leakage when
subjected to 75,000 volts/foot for 5 minutes.
THERMOPLASTIC HOSE

Cover: Comment: Hand Cutter:

Orange non stick non-perforated Lay line example may not be a true indication Hand Cutting Tool (see page 38) makes light
polyurethane. (See note) of current status. Refer Pirtek for current work of cutting Synflex hoses
information Hose Tails:
Pirtek ‘SV’ Series
Special procedures apply. Assemblies only to be
made by trained personnel listed on the Qualified
Personnel Register
Guards and warning tags are required on the
completed assembly

Lay line example: White text on orange hose. Note Comment above
SYNFLEX® 3VEO-04 SAE 1/4” I.D. W.P 10,000 P.S.I. (690 BAR) (NON CONDUCTIVE) PAT. NO. 4343333

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/m
3VEO-04 6 1/4 6.3 14.0 689 2758 64 0.158
3VEO-06 10 3/8 9.5 17.4 551 2205 76 0.244

3VEO hose assemblies are available only as completed assemblies from

accredited assemblers. Each assembly comprises :
3VEOhose
Pirtek SV Series couplings
Hose guard
Identity Tag

3VE0-04 assemblies complete with 3/8” NPT male ends are available in 6
standard configurations. Other configurations upon request
Product Code Length
3VEO04-06-1 1 metre long
3VEO04-06-2 2 metres long
3VEO04-06-3 3 metres long
3VEO04-06-4 4 metres long
3VEO04-06-5 5 metres long
3VEO04-06-6 6 metres long

52 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TP1W

HYDRAULIC HOSES
ONE WIRE THERMOPLASTIC HOSE

Construction Applications Reference Specifications

Inner Tube: TP1W LOW TEMPERATURE series These hoses meet or exceed standards:-
Smooth seamless thermoplastic polyester hoses have been created for hydraulic use at SAE 100 R1AT - EN 853 1ST,
high pressure. Suitable for gas transfer. This 1SN - EN 857 1SC pressures
hose is particularly recommended on mobile
hydraulic equipment including lift trucks
• Refer to chemical resistance
table at the back of this section

Reinforcement: Temperature Range: Vacuum Rating:

THERMOPLASTIC HOSE
One layer of high tensile steel braid -54°C up to +100°C -13.5 psi (27.5 in Hg)      
Max 70°C with air, water, water
based fluids or fire resistant fluids  
 
Cover: Comment: Cutting:
Black perforated antiabrasion polyurethane, Lay line example may not be a true indication Smooth blade recommended for cutting
stabilized to UV rays, resistant to micro- of current status. Refer Pirtek for current
organisms and good protection against information Hose Tails:
hydrolysis T series

Lay line example: White text on black hose Note Comment above
PIRTEK TP1W-08 12.7 mm (1/2”) W.P. 190 BAR (2755 P.S.I.)

Min bend
Nominal ID OD Pressure bar Weight
radius
Product
Code
DN inch mm mm working min burst mm Kg/100m

TP1W-03 5 3/16 4.8 10.0 325 1300 30 13.3

TP1W-04 6 1/4 6.4 11.9 300 1200 40 17.0
TP1W-05 8 5/16 8.0 14.0 240 960 50 22.1
TP1W-06 10 3/8 9.7 16.0 225 900 60 26.0
TP1W-08 12 1/2 13.0 19.2 190 760 75 32.6

* Twin line is also available in sizes 1/4”,5/16”,3/8” & 1/2”. Product code TP1WX2-XX

This page is part of a complete catalogue containing technical and safety data. 53
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TP2W
HYDRAULIC HOSES

TWO WIRE THERMOPLASTIC HOSE

Construction Applications Reference Specifications

Inner Tube: The TP2W series hoses have been created for These hoses meet or exceed standards:-
Smooth seamless thermoplastic polyamide the high pressure conduction of hydraulic SAE 100 R2AT - EN 853 2SN pressures
oils Polyols, Solvents, Paints/airless
paint spray and compatible gasses.
• REFER to chemical resistance table at the back
of this section for compatability

Reinforcement: Temperature Range: Vacuumn Rating:

Two layers of high tensile steel braid -40°C up to +100°C -13.5 psi (27.5 in Hg)
THERMOPLASTIC HOSE

Max +70°C with air, water, water  

based fluids or fire resistant fluids

Cover: Comment: Cutting:

Black perforated antiabrasion polyurethane, Lay line example may not be a true indication Smooth blade recommended for cutting
stabilized to UV rays of current status. Refer Pirtek for current
information Hose Tails:
K, T and J series dependant on size

Lay line example: White text on black hose Note Comment above
PIRTEK® TP2W-08 12.7 mm (1/2”) W.P. 275 BAR (4000 PSI)

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/100m
TP2W-04 6 1/4 6.4 13.5 400 1600 40 28.6
TP2W-05 8 5/16 8.0 15.1 350 1400 50 34.0
TP2W-06 10 3/8 9.7 17.0 330 1320 60 40.8
TP2W-08 12 1/2 13.0 22.0 275 1100 75 58.2
TP2W-12 20 3/4 19.2 27.5 215 860 150 76.5
TP2W-16 25 1 25.6 35.0 165 660 185 102.6

54 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TPSCO

HYDRAULIC HOSES
SEWER CLEANING HOSE

Construction Applications Reference Specifications

Inner Tube: The TPSCO series hoses have been created for 3000 psi speciality hose
Smooth seamless thermoplastic compound water applications in the high pressure cleaning
field. Low volumetric expansion, good bend
radius for supply onto hose reels and in pipes

Reinforcement: Temperature Range:

Two layers of polyester braid -40°C up to +55°C

Cover: Comment: Hose Tails:

THERMOPLASTIC HOSE
Orange antiabrasion polyurethane, Lay line example may not be a J series
stabilized to UV rays true indication of current status.
Refer Pirtek for current information.
Working Pressure:
Safety ratio 2.5 : 1

Lay line example: Black text on orange hose Note Comment above
PIRTEK® TPSCO-16 SEWER CLEANING 25.4 mm (1”) W.P. 207 BAR (3000 P.S.I.)

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/100m
TPSCO-12 20 3/4 19.2 29.8 207 518 120 43.1
TPSCO-16 25 1 25.6 37.3 207 518 150 55.0
TPSCO-20 32 1.1/4 32.0 46.0 207 518 235 84.8
• NOTE: All sizes only available as a fitted assembly in 180 metre lengths with male NPT hose fittings

This page is part of a complete catalogue containing technical and safety data. 55
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TPR7
HYDRAULIC HOSES

MEDIUM PRESSURE THERMOPLASTIC

HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems, polyols, solvents,
Smooth seamless thermoplastic polyamide paints and compatible gases. SAE 100R7
Not for use over pulleys. Note:
Flexible at low temperatures and has an • REFER to chemical resistance table at the back
excellent bend radius. of this section for compatability

Reinforcement: Temperature Range: Vacuumn Rating:

Polyester fibre braid -54°C up to +100°C -13.5 psi (27.5 in Hg)
Max +70°C with air, water, water Safety Factor
THERMOPLASTIC HOSE

based fluids or fire resistant fluids 4:1  

Cover: Comment: Cutting:

Black, perforated marine antiabrasion Layline example may not be a true indication Hand Cutting is recommended for this hose
polyurethane, stabilized to UV rays and of current status. Refer Pirtek for current Hose Tails:
resistant to micro-organisms. information Pirtek T series

Lay line example: White text on Black hose Note Comment above
PIRTEK® TPR7-06 9.5 mm (3/8”) W.P SAE 100R7 175 BAR (2537 PSI)

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/100m
TPR7-02 3 1/8 3.5 8.5 230 920 25 5.4
TPR7-03 5 3/16 4.8 10.0 210 840 30 6.8
TPR7-04 6 1/4 6.4 11.8 200 800 35 8.7
TPR7-05 8 5/16 8.0 14.3 190 760 45 12.6
TPR7-06 10 3/8 9.7 16.0 175 700 55 14.6
TPR7-08 12 1/2 13.0 20.3 140 560 75 21.4

56 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
 TPR7NC

HYDRAULIC HOSES
NON-CONDUCTIVE THERMOPLASTIC
HOSE

Construction Applications Reference Specifications

Inner Tube: General hydraulic systems that ANSI A92.2 for Vehicle Mounted Aerial Devices
Smooth seamless thermoplastic polyester may contact high voltage sources. SAE J517 Non-conductive hose
Aerial equipment Construction
Mobile hydraulics SAE 100R7
Rescue apparatus and tools Note:
Flexible at low temperatures and • REFER to chemical resistance table at the back
has an excellent bend radius of this section for compatability

Reinforcement: Temperature Range: Vacuumn Rating:

Polyester fibre braid -40°C up to +100°C -13.5 psi (27.5 in Hg)

THERMOPLASTIC HOSE
Max +70°C with air, water, water Safety Factor
based fluids or fire resistant fluids 4:1  

Cover: Comment: Cutting:

Orange non perforated antiabrasion Lay line example may not be a true indication Hand Cutting is recommended for this hose
polyurethane, stabilized to UV rays of current status. Refer Pirtek for current Hose Tails:
information Pirtek T series

Lay line example: Black text on orange hose Note Comment above
PIRTEK® TPR7NC-06 NON-CONDUCTIVE 9.7 mm (3/8”) W.P. 175 BAR (2500 PSI)

Min bend
Nominal ID OD Pressure bar Weight
"Product radius
Code”
"SAE Min
DN Inch mm mm SAE R7 ANSI A92.2 mm kg/mtr
Burst”
TPR7NC-02* 3 1/8 3.5 8.5 230 240 920 25 0.057
TPR7NC-03 5 3/16 4.8 10.0 210 224 840 30 0.073
TPR7NC-04 6 1/4 6.4 11.8 200 220 800 35 0.09
TPR7NC-05 8 5/16 8.0 14.3 190 220 760 45 0.128
TPR7NC-06 10 3/8 9.7 16.0 175 210 700 55 0.155
TPR7NC-08 12 1/2 13.0 20.3 140 185 560 75 0.219
* Available upon request

ANSI A92.2 Safety Factors:
A safety factor of 4:1 is required in the case in which the breaking of the hose may cause the rig or load lifting device or both to move.

A safety factor of 3:1 is acceptable in the case in which the breaking of the hose does not cause the aerial lifting devices to move.

SAE standard requires 4:1 safety factor

This page is part of a complete catalogue containing technical and safety data. 57
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TPR8
HYDRAULIC HOSES

HIGH PRESSURE THERMOPLASTIC

HOSE

Construction Applications Reference Specifications

Inner Tube: High Pressure general hydraulic systems, SAE 100R8 Performance with R7 dimensions
Smooth seamless thermoplastic polyamide polyols, solvents and compatible gasses. Note:
Suitable for tank to tank ONLY oxygen and Refer to chemical resistance table at the back of
breathing air mixtures. this section for compatibility.

Reinforcement: Temperature Range: Vacuum Rating:

Two layers of polyester braid -40°C up to +100°C -13.5 PSI (27.5 in Hg)
Max +70°C with air, water, water based fluids or Safety Factor:
fire resistant fluids 4:1
THERMOPLASTIC HOSE

Cover: Comment: Cutting:

Black, perforated antiabrasion polyurethane, Lay line example may not be a Hand cutting is recommended
stabilized to UV rays true indication of current status.
Refer Pirtek for current information. Hose Tails:
T series

Lay line example: White text on black hose Note Comment above
PIRTEK® TPR8-06 9.7 mm (3/8”) W.P. 280 BAR (4060 PSI)

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/100m
TPR8-02 3 1/8 3.2 7.1 420 1680 30 3.1
TPR8-03 5 3/16 4.8 10.0 350 1400 35 8.3
TPR8-04 6 1/4 6.4 11.8 350 1400 50 8.8
TPR8-06 10 3/8 9.7 16.0 280 1120 70 14.0
TPR8-08 12 1/2 13.0 20.3 245 980 95 34.1
TPR8-12 19 3/4 19.1 26.5 165 660 150 34.1
TPR8-16 25 1 25.4 34.7 145 580 200 47.5

58 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TPR8NC

HYDRAULIC HOSES
NON-CONDUCTIVE THERMOPLASTIC
HOSE

Construction Applications Reference Specifications

Inner Tube: High pressure hydraulic systems that SAE J517 Non-conductive hose
Smooth seamless thermoplastic polyamide may contact high voltage sources. Construction
Aerial equipment SAE 100R8
Mobile hydraulics Note:
Rescue apparatus and tools • REFER to chemical resistance table at the back
Flexible at low temperatures and of this section for compatability
has an excellent bend radius

Reinforcement: Temperature Range: Vacuumn Rating:

Polyester fibre braid -40°C up to +100°C -13.5 psi (27.5 in Hg)

THERMOPLASTIC HOSE
Max +70°C with air, water, water Safety Factor
based fluids or fire resistant fluids 4:1  

Cover: Comment: Cutting:

Orange non perforated antiabrasion Lay line example may not be a true indication Hand Cutting is recommended for this hose
polyurethane, stabilized to UV rays of current status. Refer Pirtek for current Hose Tails:
information Pirtek T series

Lay line example: Black text on orange hose Note Comment above
PIRTEK® TPR8NC-06 NON-CONDUCTIVE 9.7 mm (3/8”) W.P. 280 BAR (4060 PSI)

Min bend
Product Nominal ID OD Pressure bar Weight
radius
Code
DN inch mm mm working min burst mm Kg/100m
TPR8NC-04 6 1/4 6.4 11.8 350 1400 50 8.3
TPR8NC-06 10 3/8 9.7 16.0 280 1120 70 14
TPR8NC-08 12 1/2 13.0 20.3 245 980 95 21.8

This page is part of a complete catalogue containing technical and safety data. 59
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 STH
HYDRAULIC HOSES

PTFE (TEFLON) HOSE

Construction Applications Reference Specifications

Inner Tube: Medium pressure and laundry equipment SAE 100 R14
extruded seamless smooth bore Teflon Plastic moulding presses
Hazardous chemicals
Steam and compressor discharge
Reinforcement: Temperature Range: Features: A graphite impregnated (black)
AISI 304 stainless steel single wire braid -54°C up to +230°C* (see notes below) Teflon liner is available to special order for
applications requiring a core tube capable of
safely conducting static electricity. Consult Pirtek
for details
Impulse Testing:
No information available
Cover: Comment: Hose Tails:
The reinforcement braid serves as the outer No lay line present due to the stainless steel Pirtek ‘T’ Series
cover braid

Average Wall Min bend Vacuum

Product Nominal ID Pressure bar
OD Thickness radius Service
Code
Braiding mm in mm mm working min burst mm bar
STH-02 1 Braid 3.9 3/16 6.3 1.0 241 964 25 0.9
STH-03 1 Braid 4.8 3/16 7.6 1.4 206 824 50 0.9
STH-04 1 Braid 6.35 1/4 9.5 1.57 206 824 75 0.9
STH-05 1 Braid 7.94 5/16 10.9 1.48 172 688 100 0.9
STH-06 + 1 Braid 9.5 3/8 12.8 1.65 138 552 125 0.9
STH-08 + 1 Braid 12.7 1/2 16.3 1.80 120 480 165 0.9
STH-10 + 1 Braid 15.9 5/8 19.2 1.65 103 412 187 0.9
STH-12 + 1 Braid 19.05 3/4 22.6 1.78 69 276 212 0.4
STH-16 + 2 Braid 25.4 1 30.9 2.75 69 276 225 0.4
+ Use of an internal support coil for hoses -06 and larger is recmmended for tube support where continuous or extended service at high temperature
together with low or negative pressure is expected

Not recommended for steam / cold water cycling

*For temperatures above 120°C

Pressure: Reduce working pressure by 1% per additional degree C.
Vacuum: Reduce vacuum rating by 1.5% per additional degree C.
Note: The minimum bend radius quoted is for a static bend at ambient
temperature. Dynamic bending, especially at elevated temperatures,
will increase the minimum bend radius accordingly. Consult Pirtek for
specific applications

60 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TECHNICAL DATA

HYDRAULIC HOSES
SUMMARY OF PIRTEK HYDRAULIC HOSE MATERIALS
Product Code Type Description Liner Material Cover Material
2SC Two wire braid hose NBR (Class I) NBR (Class I)
C21 210 bar four spiral hose NBR (Class I) NBR (Class I)
C25 250 bar four spiral hose NBR (Class I) NBR (Class I)
C35 350 bar braid or spiral hose NBR (Class I) NBR (Class I)
C42 420 bar braid or spiral hose NBR (Class I) NBR (Class I)
C45 450 bar spiral hose high flexibility NBR (Class I) NBR (Class I)
HTAB / HTFH Engine & air brake hose NBR (Class I) NBR (Class I)
IRFAW FRAS rated Air / Water Stone Hose NBR (Class I) CR
IRFWSDH FRAS Air Water Suction & Delivery NBR (Class I) CR
IROFSD Oil suction hose NBR (Class I) SBR
JBF Large bore four spiral hose NBR (Class I) NBR (Class I)
JH70 Jacking Hose NBR (Class I) NBR (Class I)
JW210 210 bar jet wash hose Synthetic Rubber (Class IV) NBR (Class IV)
JW250 250 bar jet wash hose Synthetic Rubber (Class IV) NBR (Class IV)
JW400 400 bar jet wash hose Synthetic Rubber (Class IV) NBR Class IV)
LPG Liquid Petroleum Approved Hose Teflon® NBR (Class I)

TECHNICAL DATA
MPH Multi purpose oil and air hose NBR (Class I) NBR (Class I)
RUBBER

PC25 High abrasion resistance 250 bar hose NBR (Class I) NBR (Class I)
PC28PS High abrasion resistance 280 bar hose NBR (Class I) NBR (Class I)
PC35 High abrasion resistance 350 bar hose NBR (Class I) NBR (Class I)
PC42 High abrasion resistance 420 bar hose NBR (Class I) NBR (Class I)
R1AT One wire braid hose NBR (Class I) NBR (Class I)
R1ATFS One wire fire suppression hose NBR (Class I) NBR (Class I)
HT1 High Temp. one wire braid hose NBR (Class II) NBR (Class I)
R2AT Two wire braid hose NBR (Class I) NBR (Class I)
R2ATHT High Temp. two wire braid hose NBR (Class II) NBR (Class IV)
HT2 High Temp. two wire braid hose NBR (Class II) NBR (Class IV)
R4HT High Temp. Hydraulic Suction / Delivery NBR (Class II) NBR (Class IV)
R5HT High Temp. Air Brake Hose NBR (Class II) Polyester
R6 Low pressure hydraulic hose NBR (Class I) NBR (Class I)
R12C SAE 100R12 spiral hose NBR (Class II) NBR (Class II)
R13C SAE 100R13 spiral hose NBR (Class II) NBR (Class II)
PE2 2 wire braid hybrid hose NBR (CLASS I) NBR (CLASS I)
PE4_6 4 & 6 wire spiral 350 and 420 bar hose NBR (CLASS I) NBR (CLASS I)
WB1000 1000 bar water blast hose Synthetic Rubber (Class IV) NBR (Class III)
WB1100 1100 bar water blast hose Synthetic Rubber (Class IV) NBR (Class III)

3130 General purpose SAE 100R7 Nylon Polyurethane

3800 Compact SAE 100R8 Nylon Polyurethane
3E80 High pressure non-conductive Nylon Polyurethane
30CT Cold temperature hose Polyester (Hytrel) Polyester (Hytrel)
31BO Similar to 3130 Nylon Polyurethane
3360X2 High flexibility forklift twinline Nylon Polyester (Hytrel)
THERMOPLASTIC

37AL Non conductive SAE 100R7 Polyester Polyurethane

3JET Jetting hose based on 3130 Nylon Polyurethane
3R80 General purpose SAE 100R8 Nylon Polyurethane
3VEO Non conductive jacking hose Nylon Polyurethane
TP1W 1 wire general purpose Hydraulic Hose Polyester Polyurethane
TP2W 2 wire high pressure Hydraulic Hose Polyamide (Nylon) Polyurethane
TPSCO Sewer Cleaning - Orange Cover Thermoplastic Polyurethane
TPR7 Medium Pressure SAE 100R7 Polyamide (Nylon) Polyurethane
TPR7NC Non-conductive SAE R7 Polyester Polyurethane
TPR8 High pressure compact SAE R8 Polyamide (Nylon) Polyurethane
TPR8NC High pressure non-conductive SAE R8 Polyamide (Nylon) Polyurethane
STH Stainless steel braid over Teflon® Teflon® Stainless steel

This page is part of a complete catalogue containing technical and safety data. 61
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TECHNICAL DATA
HYDRAULIC HOSES

CHEMICAL RESISTANCE TABLE

CAUTION
The data in the following pages has been compiled from generally available sources and should not
be relied upon without consulting and following the specific recommendations of the manufacturers of
particular products
The data is considered valid at 20°C (70°F) except where specified otherwise. Chemical compatibility
can vary greatly with temperature
A good rating does not necessarily indicate the suitability of a particular hose and chemical
combination due to variables such as improper clamp and coupling application, special hose
construction, gasket material etc. Nor does it imply compliance with relevant food standards or safety
standards that may be applicable

SOLVENT INFORMATION
Aromatic solvents: benzene, cumene, p-cumene, naphthalene, toluene, xylene, cresol, styrene, cyclohexane
and combinations
Aliphatic solvents: propane, butane, pentane, hexane, heptane, dipetene, tripropylene
TECHNICAL DATA

Halogenous solvents: chloroform, dichorobenzene, dichloroethylene, methylen bromide, methylen chloride,

benzyl chloride, carbon tetrachloride, trichloroethylene, carbon disulphite, turpentine, perchloroethylene,
dichloroethane
Ketonic solvents: acetone, methyl ketone, isobutyl ketone, methyl ethyl ketone, methyl isobutyl ketone
Esters solvents: butyl acetate, methyl acetate, anyl acetate, isobutyl acetate
Amines: aniline, ethylene diamine , diethanol amine, triethanolamine, dimethyl amine, monoethanolamine
Alcohols: methanol, ethanol, propanol, butanol, glycerol

Common ASTM Composition General Properties

Elastomers Designation
brominated butyl BIIR bromo isobutene-isoprene excellent weathering resistance, low permeability to
chlorinated butyl CIIR chloro isobutene-isoprene air and gases, good physical properties, resistant to heat
poor resistance to petroleum based fluids, good resistance to fat
chlorinated CM (CPE) chloro polyethylene excellent ozone and weathering resistance, good oil and chemical
polyethylene resistance, excellent flame resistance
cross-linked XLPE polyethylene excellent for a very wide range of solvents, chemicals,
polyethylene UHMWPE and cross linking agent acids and oils
ethylene EPDM ethylene propylene excellent ozone, chemical and ageing resistance, poor resistance to
propylene diene-terpolymer petroleum based fluids, very good steam resistance
ethylene EPM (EPR) ethylene propylene excellent ozone, weathering, heat, chemical and aging resistance,
propylene copolymer poor resistance to petroleum products, very good steam resistance
hypalon ® CSM chloro-sulfonyl- excellent weathering, ozone and acid resistance, good heat and
polyethylene abrasion resistance, fair resistance to petroleum based fluids
natural NR isoprene natural excellent physical properties, very good abrasion resistance, poor
resistance to petroleum based fluids
neoprene CR chloroprene good weathering and flame retardant resistance,
good oil reistance, good physical properties
nitrile (buna-n) NBR Acrylonitrile-butadiene excellent petroleum products resistance, moderate resistance to
aromatics, good physical properties
buna-n / PVC / NBR acrylonitrile-butadiene / excellent petroleum products and weathering resistance,
polyvinyl chloride polyvinyl-chloride both for tube and cover
polyacrylic ACM acrylic monomer excellent oil and tar resistance at high temperatures

sbr SBR styrene butadiene good physical properties, good abrasion resistance,
poor resistance to petroleum based fluids
viton ® FKM fluorocarbon rubber excellent high temperature resistance, particularly in air and oil, very
good chemical resistance

62 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TECHNICAL DATA

HYDRAULIC HOSES
CHEMICAL RESISTANCE TABLE
AGENT RUBBER THERMOPLASTIC AGENT RUBBER THERMOPLASTIC

Legend: Legend:
G = Good

Polyurethane
G = Good

Polyurethane
C = Conditional

Polyester
C = Conditional

Polyester

Class IV
Class III

Class V
Class II
Class IV
Class III

Class I
Class V
Class II
U = Unsatisfactory

Class I

Teflon
Nylon
U = Unsatisfactory

Teflon
Nylon

PVC
PVC
- No Data - No Data

Acetaldehyde - - - U - G G G G U Barium Salts - - - - - - G G G G

Acetic Acid, Glacial G U - C - G C C C G Barium Sulphate - - - - - G - - - -
Acetic Acid, Less Than 10% G U - C C G - - - - Barium Sulphide - U - C - - - - - -
Acetic Acid, Over 10% C U - C C - - - - - Basic Copper Arsenate - - - - - - G G G G
Acetic Anhydride C - G C C C U Beer - - - - - G - - - -
Acetone U C - U U G G C U U Beet Sugar Liquors - - - - - G - - - -
Acetophenone - - - U - - - - - - Benzaldehyde - - - - - G G G G U
Acetyl Acetone - - - U - - - - - - Benzene (Benzol) U U - U U C G C C U
Acetyl Bromide - - - - - U U U U Benzenesulphonic Acid - - - - - C - - - -
Acetyl Chloride - - - U - - U U U U Benzine G - - - - G - - - -
Acetylene C C G G G G G G - Benzine (Petroleum Ether) - - - - - G - - - -
Acrylonitrile - - - - - G Benzine (Petroleum Naphtha) - - - - - - - - - -

TECHNICAL DATA
Air (Under 20kgf/Cm2) G - G G G G G G G Benzoic Acid - - - U - - G U U G
Alcohols - - - - - - G C C G Benzyl Alcohol - - - U - G C C C C
Aluminium - - - - - G - - - - Benzyl Benzoate - - - - G - - - -
Aluminium Acetate - - - - - G - - - - Benzyl Chloride - - - - G - - - -
Aluminium Bromide - - - - - G - - - - Biodiesel < 92c - - - C - - - - - -
Aluminium Chloride - C - G - G U - - G Biodiesel > 92c - - - U - - - - - -
Aluminium Fluoride 20% - C - U - G - - - - Bismuth Carbonate - - - - G - - - -
Aluminium Hydroxide - - - - G - - - - Black Sulphate Liquor - - - C - G - - - -
Aluminium Nitrate 10% Aqueous - - - C - G - - - - Blast Furnace Gas - - - G - G - - - -
Aluminium Salts - - - - - G - - - - Borac Acid - - - - - G - - - -
Aluminium Sulphate - C - G - G G - - G Borax - C - C - G G G G C
Aluminium Sulphate - - - - - G - - - - Bordeaux Mixture - - - - - G G G G G
Alums - C - G - G U - - G Boric Acid G U - G - G G G G G
Ammonia Gas, Cold G C - - G U U U U Boric Copper Sulphate - - - - - - G G G G
Ammonia Gas, Hot C - C G - - - - Brake Oil, Dot 3 C C - U - C G - - -
Ammonia, Aq G G - C G G - - - - Brake Oil, Dot 4 C C - U - C G - - -
Ammonia, Liquid (Anhydrous) - U - C - G - - - - Brake Oil, Dot 5 G C - U - G - - - -
Ammonium Carbonate - - U - - - - - - Brine G U - C G G - - - -
Ammonium Chloride - U - U - G G G G G Bromine U U - U G U U U C
Ammonium Hydroxide G C - U - G U U U U Bunker Oil - - - - - G - - - -
Ammonium Metaphosphate - - - - G - - - - ButAdiene - - - - - G - - - -
Ammonium Nitrate - C - U - G G C G G Butane G - - U C G - - - -
Ammonium Nitrite - - - - C - - - - Butter Oil - - - - - G G G G G
Ammonium Phosphate - U - U - G G C G G Butyl Acetate U U - U U G G C C U
Ammonium Sulphate - C - U - G G C G G Butyl Alchol (Butanol) - C - G G G G G G G
Ammonium Thiocyanate - - - G - - - - Butyl Amine - - - - - - - - - -
Amyl Acetate U U - U U G G C C U Butyl Carbitol - - - - - G - - - -
Amyl Alchol - U - C G G G G G Butyl Cellosolve - - - U - - - - -
Amyl Chloride - - - - - G - - - - Butyl Mercaptan - - - - - G - - - -
Amyl Chloronapthalene - - - - - G - - - - Butyl Stearate - - - U - G - - - -
Amyl Napthalene - - - - - G - - - - Butylene (Butene) - - - C - - - - - -
Anethole - - - - - - G - - - Butyraldehyde - - - U - G - - - -
Aniline U U - U U G C U U C Butyric Acid - - - - - G - - - -
Aniline Dyes - U - - - G - - - - Calcium Acetate 10% Aq - - - C - G - - - -
Aniline Hydrochloride - - - - - G - - - - Calcium Arsenate - - - - - G G G G
Animal Oils - - - - G - G G G G Calcium Bisulphate 10% Aq - - - G - G - - - -
Antirnony Salts - - - - - - G G G G Calcium Bisulphide - - - - - - - - - -
Apoclor Monsanto (Chlorinated Hydrocarbon) - - - - - - G C C C Calcium Bisulphite - U - - - G G G G C
Aqua Regia - - - - - - - - - - Calcium Carbonate - - - - - G - - - -
Aromatic Hydrocarbons - - - - - - G C C U Calcium Chlorate - - - - - G - - - -
Arsenic Acid - - - - - G - - - - Calcium Chloride 10% Aq - C - C - G G G G G
Arsenic Salts - - - - - G G G G G Calcium Hydroxide 10% Aq G G - C - G G C C G
Askarel - - - - - G - - - - Calcium Hypochlorite 10% Aq - U - U - G G C C G
Asphalt <105 C C U - G - G G G G G Calcium Nitrate 10% Aq - - - G - G - - - -
Automatic Transmission Fluid (ATF) G - - - - G G G G - Calcium Salts - - - - - - G G G G
Barium Carbonate - - - - - G - - - - Calcium Silicate - - - - - G - - - -
Barium Chloride - C - C - G G G G G Calcium Sulphate - - - - - G - - - -
Barium Hydroxide - C - C - G - - - - Calcium Sulphide - - - - - G - - - -

This page is part of a complete catalogue containing technical and safety data. 63
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TECHNICAL DATA
HYDRAULIC HOSES

CHEMICAL RESISTANCE TABLE

AGENT RUBBER THERMOPLASTIC AGENT RUBBER THERMOPLASTIC

Legend: Legend:
G = Good G = Good

Polyurethane

Polyurethane
C = Conditional C = Conditional

Polyester

Polyester
Class IV

Class IV
Class III

Class III
Class V

Class V
Class II

Class II
Class I

Class I
U = Unsatisfactory U = Unsatisfactory

Teflon

Teflon
Nylon

Nylon
PVC

PVC
- No Data - No Data
Caliche Liquors (Chile Saltpetre) - G - - - - - - - - Decalin - - - - - G G - - -
Cane Sugar Liquors - - - - - G - - - - Denatured Alcohol - - - - - G - - - -
Carbitol - - C - - - - - Detergent / Water Solution (Conc) C - - G C G - - - -
Carbolic Acid (Phenol) - U - U - G U U U U Diacetone - - - - - G - - - -
Carbon Bisulfide - - - - - - G C C U Diacetone Alcohol - - - - - G G C C U
Carbon Dioxide G G - G G G - - - - Diammonium Phosphate - - - - - G G C U G
Carbon Disulphide U U - U U - G C C U Dibenzyl Ether - - - - - G - - - -
Carbon Monoxide C C - G - G G G G G Dibutyl Ether - - - - - G - - - -
Carbon Tetrachloride U U - U - G G U U C Dibutyl Phthalate - - - - - G G C C -
Carbonates - - - - C - - - - - Dibutyl Sebacate - - - - - G - - - -
Carbonic Acid - U - U - G G C C G Dichlorobenzene - - - - - G - - - -
Castor Oil - - - C - G G C C G Diesel Fuel G G C C C G G G G C
TECHNICAL DATA

Caustic Potash (<20%) - - - - - - G C C G Diesel Oil Light G C - C - G G - - -

Caustic Potash (>20%) - - - - - - C C C C Diethanolamine (20% Conc.) - - - - - G G C C -
Caustic Soda (Sodium Hydroxide) <20% - - - - G G G C C G Diethyl Ether - - - - - G G C C C
Caustic Soda (Sodium Hydroxide) >20% - - - - G - C C C C Diethyl Phthalate - - - - - G - - - -
Cellosolve Acetate - U - U - G - - - - Diethyl Sebacate - - - - - G - - - -
Cellosolve Butyl - - - - - - - - - - Diethylamine - - - C - - - - -
Cellulubes Celanese (Phosphate Ester Base) - - - - - G G U U U Diethylene Glycol - - - - - G - - - -
Cellusolves Union Carbide - - - - - - G U U U Di-Isobutylene - - - - - U - - - -
China Wood Oil (Tung) - G - C - G - - - - Di-Isopropyl Ketone - - - - - G - - - -
Chlordane - - - - - - G G G C Dimethyl Aniline - - - - - G - - - -
Chlorinated Solvents - U - - U - G U U U Dimethyl Formamide - - - - - U - - - -
Chlorine Gas, Dry C C - U U G U U U C Dimethyl Phthalate - - - - - G - - - -
Chlorine Gas, Wet (<20%) U U - U G C U C G Dioctyl Phosphate - - - - - - G C C U
Chlorine Trifluoride - - - - - - - - - - Dioctyl Phthalate (Dop) - - - C - G G C C U
Chloroacetic Acid - U - U - G U U U U Dioxane - - - - - G - - - -
Chloroacetone - - - U - - - - - - Dipentene - - - - - G - - - -
Chlorobenzene - - - U - G - - - - Dowtherm A and E - - - U - - - - - -
Chlorobromomethane - - - - - G - - - - Enamels - - - - - - G G G G
Chloroform U U - U U G G U U U Essential Oils - - - - - - G G G G
Chloronapthalene - - - - G - - - - Ethanol G C - G G G G C C C
Chlorosulphonic Acid U U - U - G - - - - Ethanolamine - - - - -
Chlorotoluene - - - - - G - - - - Ether G U - C G G C C C
Chromic Acid 30% U U - U - G U U U C Ethyl Acetate U U - U U G G C C U
Chromium Salts - - - - - - G G G G Ethyl Acetoacetate - - - - - G - - - -
Cider - - - - - - G G G G Ethyl Acrylate - - - - - - - - - -
Citric Acid G U - G G G G C C G Ethyl Alchol (Ethanol) G C - G G G G C C C
Coal Gas - - - - - G G G G G Ethyl Benzene - - - U - G - - - -
Cod Liver Oil - - - - - G - - - - Ethyl Cellulose - - - - - - - - - -
Coke Oven Gas - C - U G - - - - Ethyl Chloride - C - U U G G U U U
Compressed Air (< 290 Psi or 2000 Kpa) - - - G G G - - - - Ethyl Ether - - - - - G - - - -
Copper Chloride - - - - G C G G G Ethyl Mercaptan - - - - - G - - - -
Copper Chloride 10% Aq - U - G - U - - - - Ethyl Pentochlorobenzene - - - - - G - - - -
Copper Cyanide 10% Aq - - - - - - - - - Ethyl Silicate - - - - - G - - - -
Copper Sulphate 10% Aq - U - G - G G G G G Ethylene Cellulose G U - U G G - - - -
Corn Oil - G - - - G G G G G Ethylene ChlorhydrIn - - - - - G U U U U
Corn Syrup - - - - - G - - - - Ethylene Chloride - - - - - G - - - -
Cottonseed Oil G G - C - G G G G G Ethylene Diamine - - - - - G - - - -
Creosote Oil - U - C - G U U U C Ethylene Dichloride - U - U - G G U U U
Cresol C - - - - G U U U C Ethylene Glycol G G - G G G G G C G
Cresylic Acid - - - - - - U U U C Ethylene Oxide - - - - U - G C C -
Crude Petroleum Oil - U - C C G G C G G Fatty Acid - - - - - G G G G G
Crude Wax - - - - - G - - - - Ferric Chloride - U - G - - C - - G
Cupric Sulphate - - - - - - C C C G Ferric Chloride - - - - - G - - - -
Cutting Oil White & Bagley No. 2190 - - - - - G - - - - Ferric Nitrate - - - - - G - - - -
Cyclohexane C - - - C G G G G - Ferric Nitrate 10% Aq - - - G - - - - -
Cyclohexanol - - - G - - - - - - Ferric Sulphate 10% Aq - U - G - G G G G G
Cyclohexanone - - - - - G G G G U Ferrous Chloride - - - - - G - - - -
Cymene - - - - - G - - - - Ferrous Nitrate - - - - - G - - - -

64 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TECHNICAL DATA

HYDRAULIC HOSES
CHEMICAL RESISTANCE TABLE
AGENT RUBBER THERMOPLASTIC AGENT RUBBER THERMOPLASTIC

Legend: Legend:
G = Good G = Good

Polyurethane

Polyurethane
C = Conditional C = Conditional

Polyester

Polyester
Class IV

Class IV
Class III

Class III
Class V

Class V
Class II

Class II
Class I

Class I
U = Unsatisfactory U = Unsatisfactory

Teflon

Teflon
Nylon

Nylon
PVC

PVC
- No Data - No Data
Ferrous Salt Solutions - U - - - - - - - - Hydrogen Peroxide, Dilute - U - C G G G G G G
Ferrous Sulphate - - - - - G - - - - Hydrogen Sulphate, Gaseous - - - - - G - - - -
Fluoboric Acid - - - - - - U U C Hydrogen Sulphide, Dry C U - U - G C C - G
Fluoboric Acid - - - - - G - - - - Hydrogen Sulphide, Wet G U - - - G - - - -
Fluorine - - - - U - U U U C Hydrogluosilic Acid - U - - - - - - - -
Fluorosilicic - - - - - - - - U C Hydrolube Union Carbide -
Formaldehyde C U - U G G G C C G (Hydraulic Fluid Water Glycol Base) - - - - - - G C G G
Formic Acid G U - C G U U U C Irus Shell 902 Hydraulic Fluid
Freon 12 (Refrigerant) C C - G G C C C (Water-Oil Emulsion) - - - - - G - - - -
Freon 13 (Refrigerant) C - - - - - - - - - Iso Octane - - - G - G - - - -
Freon 22 (Refrigerant) C - - - - - - - - - Isobutyl Alcohol - - - - G - - - -
Fruit Juices - - - G G G G IsocyanAtes - - - U - - G G G -
Fuel Oil G C - C G G G G C Isopropyl Acetate - - - U - G G C C U

TECHNICAL DATA
Fuel Oil (Aromatic Gas) 100 Octane - - - - - G G G C Isopropyl Alcohol - - - G G G - - - -
Fuel Oil (Aromatic Gas) 100 Octane - - - - - - - - - - Isopropyl Ether - - - C - G - - - -
Fumaric Acid - - - - - - - - - - Jp-4, Jp-5 - - - - - - - - - -
Furan Furfuran - - - - - G - - - - Kerosene G C - C G G G G G C
Furfural C C - U - G - - - - Ketones - - - - - - G C C U
Furfuryl Alcohol - - - - - - G G G G Lacquer U U - U - G - - - -
Galic Acid (< 20%) - - - C - G G C C G Lacquer Solvents - U - U - G G C C U
Gas (Natural) - - - - - G G G G G Lactic Acid C U - - - G G - - G
Gas Oil - - - - - - G C G C Lard - - - - - G G G G G
Gaseous Hydrogen - - - - - G - - - - Lead Acetate - - - - - G - - - -
Gasohol - - - C - - - - - - Lead Arsenate - - - - - - G G G G
Gasoline G U - C C G G G G C Lead Sulphate - - - - - - G G G G
Gasoline (Aromatic) - - - - - - G G G C Lead Tetramethyl - - - - - - G G G -
Gasoline (Nor-Aromatic) - - - - - - G G G G Light Oil G - - - - G G G G
Gelatine - G - - - - G G G G Lime - - - - - - G G G G
Glucose - G - - - G G G G G Lime Sulphur - - - U - - - - - -
Glue (Depends On Type) - G - - - G G G G G Linoleic Acid - - - - - G - - - -
Glycerine, Glycerol G G - G G G G G G G Linseed Cake - - - - - G G G G
Glycol To Wc - - - - G G G G C G Linseed Oil G G - C - G G G G G
Grease,Petroleum G C - - - G G G G C Liquefied Petroleum Gas (LPG) G - - U C - - - - -
Green Sulphate Liquor U - U - G - - - - Lubricating Oils, Diester Base - - - - - - G C C -
Heavy Water (D20) G - - - G G G - - Lubricating Oils, Petro Base G G - C G - - - - -
Helium - - - G - - - - - - Magnesium Chloride 10%Aq - U - G - G G G G G
Heptane U G - C - G G G G C Magnesium Hydroxide 10%Aq G C - G - G G C C G
Hexaldehyde - - - U - G - - - - Magnesium Sulphate 10%Aq - G - G - G G G G G
Hexane U G - G G G G G G C Maleic Acid - - - - - G G C C G
Hexene - - - - - G - - - - Mercuric Chloride G C - G G G G G C
Hexyl Alcohol - - - - - G - - - - Mercury G G - G G G G G G G
Hydraulic Oil Phos. Ester Blend (MIL L-7808) - U - - - G G C C U Mesityl Oxide - - - - - G - - - -
Hydraulic Oil, Auto Transmission Fluid - - - - - G G G G U Methane - - - - - - G G G U
Hydraulic Oil, Chlorine Base U - - - - G - - - - Methy Salicylate - - - - - G - - - -
Hydraulic Oil, Ester Blend - - - - - G - - - - Methyl Acetate - - - - - G G C C U
Hydraulic Oil, Ordinary Petro G G - - G G - - - - Methyl Alcohol (Methanol) - C - C G G G C C U
Hydraulic Oil, Phosphate Ester (FR) U U - U - G G C C U Methyl Bromide - - - U G C U U U
Hydraulic Oil, Silicone Oil G G - - - G - - - - Methyl Chloride - U - U U G G U U U
Hydraulic Oil, Sodium Silicate Base - - - - - G - - - - Methyl Ethyl Ketone (MEK) - - - U U G G C C U
Hydraulic Oil, Water & Petrol Emulsion (FR) C - C - G - - - - Methyl Formate - - - - - G - - - -
Hydraulic Oil, Water Glycol (85c) C G - C - G G C G G Methyl Isopropyl Ketone - - - C - - - - - -
Hydraulic,Oil, Water & Oil Emulsion C C - C G G G G G G Methyl Methacrylate - - - - - G - - - -
Hydrobromic Acid - U - G G - - - - Methyl Sulphate - - - - - - G G G -
Hydrochloric Acid V% - U - U U G G U C G Methylene Chloride - - - - - G - - - -
Hydrocyanic Acid G C - U - G U - - G Methylisobutylketone (MIBK) - - - - - G G C C U
Hydrofluoric Acid, Cold - - U - G U U U C MIL-H-46170 - - - C - - - - - -
Hydrofluoric Acid, Hot - U - U - G - - - - MIL-H-5606 - - - C - - - - - -
Hydrofluorsilic Acid - - - G - G - - - - MIL-H-6083 - - - C - - - - - -
Hydrogen (Gaseous) G C - G C G G G G G MIL-H-83282 - - - C - - - - - -
Hydrogen Peroxide, Concentrated - U - C C G U U U C

This page is part of a complete catalogue containing technical and safety data. 65
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
 TECHNICAL DATA
HYDRAULIC HOSES

CHEMICAL RESISTANCE TABLE

AGENT RUBBER THERMOPLASTIC AGENT RUBBER THERMOPLASTIC

Legend: Legend:
G = Good G = Good

Polyurethane

Polyurethane
C = Conditional C = Conditional

Polyester

Polyester
Class IV

Class IV
Class III

Class III
Class V

Class V
Class II

Class II
Class I

Class I
U = Unsatisfactory U = Unsatisfactory

Teflon

Teflon
Nylon

Nylon
PVC

PVC
- No Data - No Data
Milk - - - - - G G G G G Potassium Permanganate (5%. Conc.) - - - - - - U U U G
Mil-L-2104 - - - G - - - - - - Potassium Sulphate - G - G - G G G G G
Mil-L-23699 - - - G - - - - - - Propane - - - U - G G G G G
Mil-L-7808 - - - G - - - - - - Propyl Acetate - - - U - - - - - -
Mineral Oils G - - G G G G G G G Propyl Alcohol - - - - - G - - - -
Molasses - - - - - G G G G Pydraul (Stauffer) F-9,150, 600, 625 - - - - - - G C C U
Monochlorobenzene - - - - - G - - - - Pyrethrum - - - - - - G G G G
Mustard - - - - - G G G G - Pyridine - - - - - G C C G U
Naphtalene C U - U U G G C C U Red Oil - - - - - G - - - -
Naphtha G C - G G G C C U Salt Water (Sea Water) G U - C G G G G G G
Napthenic Acid - - - - - G - - - - Saturated Steam U - - U U - - - - -
Natural Gas - G - U G G - - - - Sewage - - - G G - - - -
TECHNICAL DATA

Nickel Acetate 10% Aq - - - G - G - - - - Silicone Oils - G - G G - - - -

Nickel Chloride - U - G - G U U - U Silver Nitrate - - - - - G - - - -
Nickel Sulphate - U - G - G - - - - Skydrol Monsanto 500, 7000 - - - - - G G U U U
Nicotine - - - - - - G G G G Soap Solutions C - G G C G G G G G
Nitric Acid (Conc) U U - U U G C U U G Soda (Sodium Carbonate) G - - G G - G G G G
Nitric ACid (Dil) C U - U U G C C C G Soda Water - - - - - - G G G C
Nitriuc Acid (Red, Fuming) - - - - - G - - - - Sodium Acetate 10% Aq - - - G - G - - - -
Nitrobenzene - U - U U G G U U U Sodium Bicarbonate 10% Aq - - - G - G - - - -
Nitrogen / Argon Gaseous G - - G - G - - - - Sodium Bisulfite - - - - - - G G G G
Nitrous Oxide - - - - - - G G G G Sodium Bisulphate - U - - G - - - -
Octyl Alcohol - - - U - G - - - - Sodium Borate - - - - - G G G G G
Oil - - - - - - G G G C Sodium Carbonate - - - - - - G G G G
Oil Of Turpentine - - - - U G G G G Sodium Chloride Solutions G U - - G G G G G G
Oleic Acid G U - U U G - - - - Sodium Cyanide - - - - - - G G G G
Oleum Spirits - U - C - - G G G C Sodium Hydroxide <10% - U - C G G G C C G
Olive Oil - - - - - G - - - - Sodium Hydroxide 40% - U - - - G - - - -
Ortho-Dichlorobenzene - - - U - - - - - - Sodium Hypochloride 10% - - - - C - - - - -
OS 45 Monsanto Hyd. Fluid (Silicate Ester Base) - - - - - - G C C - Sodium Hypochlorite - U - G - G C C C G
Oxalic Acid - C - C U G C C G Sodium Metaphosphate 10% Aq - - - G - - - - - -
Oxygen (Liquid) - U - U U - - - - - Sodium Nitrate 10% Aq - - - G - G G G G G
Oxygen Gaseous - - - - G - - - - Sodium Perborate 10% Aq - U - G - G - - - -
Ozone - - - - - G G G G G Sodium Peroxide 10% Aq C U - G - G - - - -
Paint (Oil Based) - - - - - G G G G C Sodium Phosphates 10% Aq - U - C - G G G G G
Paint Solvents (Oil Base) - - - - - G G C C C Sodium Silicate 10% Aq G - - G - - G G G G
Palmlitic Acid - U - G G G G G G Sodium Sulphate 10% Aq - - - G - - G G G G
Peanut Oil - - - - - G - - - - Sodium Sulphide - - - - - - G G G G
Pentane - - - - - - G G G C Sodium Sulphite 10% Aq G - G - G - - - -
Perchloric Acid - - - U G U U U C Sodium Thiosulphate (Hypo) 10% Aq - U - G - G G G G G
Perchloroethylene - U - U U G G U U C Solution 2-4D DDT Preparation Hydroxy Quinoline - - - - G - - G
Petroleum Oils (Refined) - - - - - G G G G G Soybean Oil - G - C - G - - - -
Petroleum Oils (Sour) - - - - - G G C C G Stannic Chloride - U - G - G - - - -
Phenol (Carbolic Acid) - U - U U - U U U C Stannous Chloride - - - - - C G G G
Phenolates - - - - - - C C G C Steam - - - - - G U U U U
Phenols (Carbolic Acid) - - - - - G - - - - Steam - U - U - G - - - -
Phosphate Ester Base Oil - U - U U - - - - - Stearic Acid - - - - - G G C G
Phosphoric Acid (70%) - - U U - - - - - Stearic Acid, Botanical - C - G - G - - - -
Phosphoric Acid 10% G U - U G - G U U G Stearin - - - - - G G G -
Picric Acid (Molten) - U - - - G C U U G Stoddard Solvent - - - - - G G U U C
Picric Acid (Solution) - C - - - G - - - - Styrene - - - - - G G C C -
Pine Oil - - - - - G - - - - Sucrose Solution - - - - - G - - - -
Pinene - - - - - G - - - - Sulphur - - - - - G G G G
Plating Solution, Chrome - - - - - G - - - - Sulphur C G - G G G - - - -
Potassium Acetate 10% Aq - - - G - G - - - - Sulphur Chloride - C - U G - - - -
Potassium Chloride - U - G - G G G G G Sulphur Dioxide G U - U U G U U U C
Potassium Cyanide - G - G - G - - - - Sulphur Trioxide - U - - - - C U U G
Potassium Dichromate - - - G - G - - - - Sulphuric Acid, 10%, Hot G U - U U G - - - -
Potassium Hydroxide (Potash) G U - G - G C U U C Sulphuric Acid, 10%. Cold G U - U U G C U U G
Potassium Nitrate - - - - - G G G G G Sulphuric Acid, 75%, Cold U U - U U G - - - -

66 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice
TECHNICAL DATA

HYDRAULIC HOSES
CHEMICAL RESISTANCE TABLE
AGENT RUBBER THERMOPLASTIC

Legend:
G = Good

Polyurethane
C = Conditional

Polyester
Class IV
Class III

Class V
Class II
Class I
U = Unsatisfactory

Teflon
Nylon

PVC
- No Data
Sulphuric Acid, 75%, Hot U U - U - G - - - -
Sulphuric Acid, 95%, Cold U U - U - G U U U U
Sulphuric Acid, 95%, Hot U U - U - G - - - -
Sulphurous Acid G - G - U U U C
Tannic Acid G U - G - G G C C G
Tar - U - G - G G G G G
Tartaric Acid - U - G - G G G G G
Terpineol - - - - - G - - - -
Toluene U U - U U G G C C U
Toluol - - - - - G C C U
Transformer Oil - - - - - G - - - -
Transmission Fluid Type A G - - - - G - - - -

TECHNICAL DATA
Tributoxyethyl Phosphate - - - - - G - - - -
Tributyl Phosphate - - - - - G G C C U
Trichloracetic Acid - - - - - - U U U C
Trichlorethylene U U - U U G G U U C
Tricresyl Phosphate - - - U - - G C C U
Trisodium Phosphate Solution - - - - - - G C C G
Tung Oil (China Wood Oil) - G - - G - - - -
Turpentine Oil - U - G - G G G G G
Ucon Union Carbide
(Hydraulic Fluid Water Glycol Base) - - - - - - G C G G
Urea - - - - - G G C C G
Uric Acid - - - - - - G U U G
Varnish U - - G - - G G G U
Vegetable Greases - - - - G G - - - -
Versilube - - - - - G - - - -
Vinegar - - - - - G G C C G
Vinyl Chloride - - - - - G - - - -
Water @ 65°C - G G C - G G G G G
Water Glycol - - - G - - - - - -
Water, Normal Temp G C G G G G - - - -
Whiskey - - - - - G - - - -
White & Bagley No. 2190 Cutting Oil - - - - - G G - - -
Wine - - - - - G G G G G
Wool Oil - - - - - - G G G G
Xylene - - - U U G G C C U
Xylol - - - - - - G C C U
Zinc Acetate - - - - - G - - - -
Zinc Chloride 10% Aq - C - G - G G G G G
Zinc Hydrate - - - - - - U C C G
Zinc Sulphate 10% Aq - C - G - G U C C G

This page is part of a complete catalogue containing technical and safety data. 67
All data must be reviewed when selecting a product.
Pirtek reserve the right to change technical specifications without notice
B
HYDRAULIC HOSES
TECHNICAL DATA

68 This page is part of a complete catalogue containing technical and safety data.
All data must be reviewed when selecting a product.
B Pirtek reserve the right to change technical specifications without notice