Scribd
Upload
25 views

DS - Graphite PSM-AS. Eng

The document summarizes information about Klingergraphite PSM/AS, a pure exfoliated graphite gasket material with stainless steel reinforcement. It has excellent chemical and thermal resistance, making it suitable for use in the petrochemical and chemical industries. The material has properties like compressibility, recovery stress relaxation, and low gas leakage. It is available in sheet sizes from 0.8mm to 3.0mm thick and can be used without concerns in many applications, but its chemical compatibility should always be considered.

Uploaded by

Dan Pastor
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

DS - Graphite PSM-AS. Eng

The document summarizes information about Klingergraphite PSM/AS, a pure exfoliated graphite gasket material with stainless steel reinforcement. It has excellent chemical and thermal resistance, making it suitable for use in the petrochemical and chemical industries. The material has properties like compressibility, recovery stress relaxation, and low gas leakage. It is available in sheet sizes from 0.8mm to 3.0mm thick and can be used without concerns in many applications, but its chemical compatibility should always be considered.

Uploaded by

Dan Pastor
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

A

KLINGERgraphite PSM/AS
Pure exfoliated graphite with a tanged stainless
steel sheet reinforcement for improved blow-
out resistance and ease of handling. Due to the
excellent chemical and thermal capabilities of
graphite it is used extensively throughout the
petrochemical and chemical industries for
process duties and steam applications.

The Klinger group has been General Properties


recognised as the market ƒ Excellent resistance to steam
leader in gaskets and ƒ Resistant to virtually all media
sealing for over a century. ƒ Outstanding resistance to high and low temperature
Our research and ƒ High compressibility
ƒ Good leakage properties
development laboratories ƒ Unlimited storage life
have investigated over 250 ƒ Anti-stick finish on both sides
different fibre forms in the
search for asbestos free Tests and Certifications
alternatives. The search has ƒ BAM Approval for use with oxygen 130 bar/2000C
resulted in a range of high ƒ WRc Approval
quality and high ƒ DIN DVGW NG-5124AT0417
performance asbestos free ƒ Firesafe according to BS 5146
materials that have been
Availability
proven in service ƒ Sheeting (m): 1.0 x 1.0*, 1.5 x 1.5
ƒ Thickness (mm): 0.8, 1.0, 1.5, 2.0, 3.0

* - Denotes standard sheet size


Also available in 99.85% pure nuclear grade
A
KLINGERgraphite PSM/AS

Application
Guidelines

1. Usually satisfactory without reference.


2. Usually satisfactory, but suggest you
refer to Klinger for advice
3. Caution: May be suitable but essential
that you refer to Klinger for advice.
Chemical compatibility must be considered
in all cases.

Typical Specifications
Compressibility ASTM F 36 A 33-38%

Recovery ASTM F 36 A 13-18%

Stress relaxation DIN 52913 50MPa, 16h/3000C min 48MPa

Klinger cold/hot compression (50 MPa) Thickness decrease 230C 40%


decrease at 3000C 1.5%

Gas leakage according to DIN 3535/6 0.8ml/min

Chlorides (soluble) <40ppm

Fluoride and Chloride Content <200ppm

Density 1.0g/cm3

Purity min 98%

Typical values for 1.5mm thick material

Head Office Klinger Ltd. Grangemouth Klinger Ltd. Runcorn


KLINGER Ltd Tel: 01324 472 231 Tel: 01928 577 030
Wharfedale Road Fax: 01324 482 111 Fax: 01928 575 223
Euroway Trading Estate
Bradford BD4 6SG Klinger Ltd. Aberdeen Klinger Ltd. International
Tel: 01224 772 962 Tel: 020 8308 0100
Tel: 01274 688 222 Fax: 01224 772 953 Fax: 020 8308 0200
Fax: 01274 688 549
Klinger Ltd. Middlesbrough
Tel: 01642 220 289
Fax: 01642 220 290
All information and recommendations contained in this specification sheet are to the best of our knowledge correct. Since
conditions of use are beyond our control, users must satisfy themselves that the products are suitable for the intended
processes and uses. No warranty is given or implied in respect of information or recommendations or that any use of products
will not infringe rights belonging to other parties. In any event or occurrence our liability is limited to our invoice value of the
goods delivered by us to you. We reserve the right to change product design and properties without notice

You might also like