Scribd
Upload
39 views

Appendix C

The document outlines the requirements for a design document for an Advanced Oxidation Process (AOP) application. It lists 4 main sections that must be included: 1) Design Analysis, 2) Plans, 3) Specifications, and 4) Operation & Maintenance Manuals. Section 1 requires descriptions of wastewater characteristics, equipment, mass balance calculations, and records. Section 2 requires various diagrams and plans. Section 3 requires equipment sizing and component specifications. Section 4 requires procedures, manuals, catalogs, and service details.

Uploaded by

Magin Idelfonso Torreblanca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Appendix C

The document outlines the requirements for a design document for an Advanced Oxidation Process (AOP) application. It lists 4 main sections that must be included: 1) Design Analysis, 2) Plans, 3) Specifications, and 4) Operation & Maintenance Manuals. Section 1 requires descriptions of wastewater characteristics, equipment, mass balance calculations, and records. Section 2 requires various diagrams and plans. Section 3 requires equipment sizing and component specifications. Section 4 requires procedures, manuals, catalogs, and service details.

Uploaded by

Magin Idelfonso Torreblanca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ETL 1110-1-161

29 MAR 96

APPENDIX C

CHECKLIST FOR
DESIGN DOCUMENT

1.0 DESIGN ANALYSIS


The design analysis should be performed in accordance with
Department of the Army U.S. Army Corp and Engineers publication
“Engineer and Design--Design Analyses,” Regulation ER 1110-345-
700. For AOP applications, the complete design analyses should
include, but not be limited to the following: (some of the
calculations may be carried out by the vendor)

1.1 PROCESS DESCRIPTION


1.1.1 Wastewater Characteristics
1.1.2 Pretreatment Requirements
1.1.3 Performance Requirements
1.1.4 Description of Equipment and Controls

1.2 CALCULATIONS
1.2.1 Mass Balance Calculations
1.2.2 Equipment Sizing
1.2.3 Oxidants and/or Chemical Feed

1.3 RECORDS
1.3.1 Correspondence
1.3.2 Manufacturers Literature
1.3.3 Environmental Criteria

2.0 PLANS

2.1 PROCESS FLOW DIAGRAMS (LIQUID AND SOLID)

2.2 EQUIPMENT LAYOUT PLAN

2.3 PROCESS & INSTRUMENTATION DIAGRAMS (CONTROL SCHEMATICS)

2.4 PIPING AND PLUMBING PLANS. SECTIONS. AND DETAILS

2.5 CONNECTION DETAILS

C-1
ETL 1110-1-161
29 MAR 96

2.6 COORDINATION WITH OTHER DISCIPLINES


2.6.1 General Plans (Drawing Index, Legend and General
Notes, Abbreviations)
2.6.2 Structural Plans (Concrete Slab and Foundation Plans)
2.6.3 Architectural Plans (Interior and Exterior Elevations)
2.6.4 Mechanical Plans (Hydraulic Profiles of Liquids and
Solids, HVAC Plans and Details)
2.6.5 Electric Plans (Line Diagrams, Power and Control
Plans)

3.0 SPECIFICATIONS

3.1 EQUIPMENT SIZING (BASED ON DESIGN ANALYSIS CALCULATIONS)

3.2 AOP COMPONENTS


3.2.1 Accessories (Coordinate with Other Specification)
3.2.2 Ozonator Specifications
3.2.3 UV Lamp Specifications
3.2.4 Chemical Feed Systems Specifications
3.2.5 Compressed Air (Plumbing) Specifications
3.2.6 Oxidants and or Chemical Storage Tank Specifications.

3.3 SPECIAL MATERIAL REQUIREMENTS (COORDINATE WITH ALL GUIDE


SPECIFICATIONS)

3.4 RELATED SPECIFICATIONS


3.4.1 Electric Work Specification
3.4.2 Plumbing and Piping Specifications
3.4.3 Installation (Concrete and Welding)
Specifications

4.0 OPERATION & MAINTENANCE MANUALS

4.1 O&M PROCEDURES


4.1.1 Start-up Procedures
4.1.2 Operating Procedures
4.1.3 Shutdown Procedures
4.1.4 Maintenance Schedule

4.2 SPECIFICATIONS AND PLANS

C-2
ETL 1110-1-161
29 MAR 96

4.2.1 Equipment Specifications (Manufacturer*s Name, Model


Number, Size/ Dimension, Description of Operating Functions)
4.2.2 Equipment Plans (Piping, Valve, Wiring, and Control
Layouts)

4.3 EQUIPMENT CATALOGS

4.4 SERVICE REQUIREMENTS


4.4.1 Utility Requirements (Air, Electric Waste)
4.4.2 Maintenance Instructions (Routine Procedures,
Breakdowns and Repairs)
4.4.3 Troubleshooting Guide

C-3

You might also like