Scribd
Upload
72 views

RF Optimization Tips - CSSR Optimization For GSM and WCDMA

This document discusses tips for optimizing Call Setup Success Rate (CSSR) in GSM and WCDMA networks. In GSM there is one CSSR metric for voice services, while in WCDMA there are separate CSSR metrics for voice, data, video, HSDPA and HSUPA services. The tips provided for GSM CSSR optimization include checking for hardware issues, ensuring no SD blocking, checking for frequency interference, ensuring no overshooting, tuning access parameters, and using layering between TRXs. Tips for WCDMA CSSR optimization are also provided but not described in detail.

Uploaded by

reza seyedMohammadi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
72 views

RF Optimization Tips - CSSR Optimization For GSM and WCDMA

This document discusses tips for optimizing Call Setup Success Rate (CSSR) in GSM and WCDMA networks. In GSM there is one CSSR metric for voice services, while in WCDMA there are separate CSSR metrics for voice, data, video, HSDPA and HSUPA services. The tips provided for GSM CSSR optimization include checking for hardware issues, ensuring no SD blocking, checking for frequency interference, ensuring no overshooting, tuning access parameters, and using layering between TRXs. Tips for WCDMA CSSR optimization are also provided but not described in detail.

Uploaded by

reza seyedMohammadi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2/4/2020 RF Optimization Tips: CSSR Optimization for GSM and WCDMA

More [email protected] Dashboard Sign Out

RF Optimization Tips
Sharing knowledge about RF Optimization in 2G GSM,3G WCDMA/UMTS and 4G LTE

Thursday, 19 November 2015 SUBSCRIBER

CSSR Optimization for GSM and WCDMA


CSSR stands for Call Set up Success Rate that is one of important KPI(Key Performances
Indicator) in Optimization both GSM and UMTS/WCDMA. For the beginning we have to
know that KPI in WCDMA including CSSR are separated based on each Services such as :
REGISTER YOUR EMAIL TO GET FREE
CSSR CS( for Voice services), CSSR PS(for PS/Data Services), CSSR Video(for Video
Services),CSSR HSDPA(For HSDPA Services), CSSR HSUPA(for HSUPA Services). In OPTIMIZATION TIPS !
GSM there is only one type CSSR(Voice Services), For Data services usually called as
PDASR(Packet data Access Success Rate) or TBF Establishment Success Rate.There are Enter your email here !
some tips how to optimizes CSSR in GSM and WCDMA.
1. GSM CSSR Optimization tips
-Make Sure no Hardware issue SUBSCRIBE
Hardware checking is always the first step to check all KPI because you will have no impact
about your action if common problem like Hardware or Installation has occurred in your
network. Defect GRFU/CU(TRX Module) or Combiner will make CSSR degraded below
95%. Swap module to other sector to identify the problem and replace bad module.Also Blog Archive About Me
make sure no problem with Power or Transmission. Check for TCH availability and active
►
► 2017 (6) Hidayat Encuh
alarm to make sure no hardware issue.
-Make Sure no SD Blocking ►
► 2016 (5) View my complete
Lack of SDCCH can make degradation in CSSR because SD Blocking included in CSSR ▼
profile
▼ 2015 (11)
Formula, make sure no SD Blocking found in your cells. If found then you have to add SD
►
► December (8)
channel based on Erlang Calculation. If you lazy to calculate, just add 1 channel first :D
,then increase 1 channel again if still found Blocking on SDCCH. ▼
▼ November (3)
-Make Sure no Frequency Interference WCDMA CSSR
Optimization
Frequency Interference can make high SD drop in your cells.SD drop also included in CSSR
Tips
Formula,check for SD drop first if found then you need to clear the cells by re-tune/change
CSSR
BCCH Frequency. Interference problem also will impact to other KPI like drop call rate,
Optimization
Handover, etc for GSM and
-Make Sure no Overshooting WCDMA
Overshooting also will make your CSSR getting low and under threshold because to much Drop Call Rate
attempt at the edge of Coverage with low RX Level. You have to make sure no overshooting Optimization,
occurred to make good CSSR. If found then you need to adjust your coverage by add Tilting How to identify
and f...
value(Down Tilt)
-Tuning Parameter
You need to change parameter smoothly if all main problem have cleared. Try to change
wisely related access parameter such as : RXLEVAMI/RXLEVACCMIN/AccMin(Different
name between Vendor),RACHBT,T200,MAXRETR,etc.Make sure no extreme setting to
avoid bad user perception :D.
-TRX Layering
Shifting traffic from bad TRX to Good TRX can improve your KPI included CSSR. Try to set
Good TRX as high priority and bad TRX as lowest priority to improve your CSSR. TRX
BCCH usually has better Quality to set as highest priority because Full Power(No Power
Control).

2. WCDMA CSSR Optimization Tips


Continued here

You might also Need to know:


- How to Optimize Handover Success Rate in GSM Network
- Drop Call Rate Optimization in GSM and UMTS
- Power Control activation for Electricity Saving in Huawei GSM

Posted by Hidayat Encuh at 16:00

3 comments:

rfoptimization-tips.blogspot.com/2015/11/cssr-optimization.html 1/2
2/4/2020 RF Optimization Tips: CSSR Optimization for GSM and WCDMA
Unknown 3 September 2016 at 17:08
merci beaucoup
Reply

Unknown 9 September 2016 at 01:28


This Document is very good, thank you for your Help
Reply

Hidayat Encuh 15 September 2016 at 23:55


you are welcome
Reply

Enter your comment...

Comment as: reza.m.paret@ Sign out

Publish Preview Notify me

Newer Post Home Older Post

Subscribe to: Post Comments (Atom)

popup

Simple theme. Powered by Blogger.

rfoptimization-tips.blogspot.com/2015/11/cssr-optimization.html 2/2

You might also like