Scribd
Upload
62 views48 pages

LCD Weekly / Yearly Time Switch: Manual

This document provides safety information for an LCD weekly/yearly time switch. It contains 3 sentences or less: It describes important safety information including dangers, warnings, and cautions that must be followed when using the product. Users are instructed to read the safety information carefully before use and follow all instructions. The document also provides additional operational guidelines and maintenance recommendations for safe use of the product.

Uploaded by

hieu nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views48 pages

LCD Weekly / Yearly Time Switch: Manual

This document provides safety information for an LCD weekly/yearly time switch. It contains 3 sentences or less: It describes important safety information including dangers, warnings, and cautions that must be followed when using the product. Users are instructed to read the safety information carefully before use and follow all instructions. The document also provides additional operational guidelines and maintenance recommendations for safe use of the product.

Uploaded by

hieu nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 48

LCD weekly/yearly time switch LY7

Manual
1.1 Safety information
Please read safety information carefully before use and then use this product properly.
Safety information described in this manual contains important contents related with
safety. So please follow the instructions accordingly. Safety information is composed of
DANGER, WARNING and CAUTION.

Danger

Warning

Caution
The contents of this manual maybe changed without prior notification.
Before using the product you have purchased, check to make sure that it is exactly what you ordered.
Check to make sure that there is no damage or abnormality of the product during delivery.
Do not use this product at any place with corrosive(especially noxious gas or ammonia) or
flammable gas.
Do not use this product at any place with direct vibration or impact.
Do not use this product at any place with liquid, oil, medical substances, dust, salt or iron
contents. (Use at Pollution level 1 or 2)
Do not polish this product with substances such as alcohol or benzene.
Do not use this product at any place with excessive induction trouble, static electricity or magnetic noise.
Do not use this product at any place with possible thermal accumulation due to direct
sunlight or heat radiation.
Install this product at place under 2,000 m in altitude.
When the product gets wet, the inspection is essential because there is danger of an
electric leakage or fire.
If there is excessive noise from the power supply, using insulating transformer and noise
filter is recommended. The noise filter must be attached to a panel grounded, and the wire
between the filter output side and power supply terminal must be as short as possible.
It is effective to use a twisted cable for power supply against noise.
Do not connect anything to the unused terminals.
After checking polarity of terminal, connect wires at the correct position.
When this product is connected to a panel, use a circuit breaker or switch approved with
IEC947-1 or IEC947-3.
Install the circuit breaker or switch at near place for convenient use.
Write down on a label that the operation of circuit breaker or switch disconnects the power
since the devise is installed.
For the continuous and safe use of this product, the periodical maintenance is recommended.
Some parts of this product have limited life span, and others are changed by their usage.
The warranty period for this product including parts is one year if this product is properly used.
When the power is on, the preparation period of contact output is required. In case of use
for signals of external interlock circuit, use with a delay relay.
MD0406E110503

You might also like