Designed by Yizumi in March 2018

A5-N Series High-end Servo

Injection Molding Machine
New A5-N, Excellent As Always

YIZUMI-HPM Corporation
3424 State Route 309,Iberia, Ohio 43325
TEL: 740-382-5600 Email: [email protected] www.yizumi-hpm.com
 About Yizumi-HPM Corporation

Yizumi-HPM Corporation Yizumi Headquarters

Mission & Vision

Our mission is to use the HPM technology developed over 135 years
combined with modern control technology to R&D and manufacture the best
performance and competitive
priced machines to satisfy our customer needs.
Yizumi-HPM Team Yizumi Shunde(Wusha)Production Base Yizumi Suzhou(Wujiang)Production Base
Our vision is to become the No.1 choice for our customers in the world.

Yizumi-HPM Corporation is a manufacturer of high quality hybrid injection molding machinery from 60 to 3500 tons, and
hot and cold chamber die casting machinery from 200 to 4500 tons. HPM has been supplying injection molding
machinery and support services to the plastic industry since 1931, and has thousands of injection molding and die
casting machines in operation throughout North America.

HPM Company was incorporated in 1877 as the Hydraulic Press Manufacturing Company in Mount Gilead, Ohio, with the
purpose to design and build hydraulic presses for the extraction of apple cider. Through the sales efforts of its founders,
the company marketed its products to most fruit-growing areas in the United States and Canada, gaining credibility
primarily through word-of-mouth advertising. HPM started to manufacture hydraulic presses that were used in a number
of markets, including textiles, railroads, and food processing.

In March of 2011, Guangdong Yizumi Precision Machinery Co., Ltd, located in China, acquired all HPM intellectual
properties. Shortly after the purchase, HPM North America Corporation was set up in Marion, Ohio. In 2017 HPM North
America changed its name to Yizumi-HPM Corporation to be representative of the formidable international company
that we are a part of today.

Yizumi-HPM Corporation sells and manufactures injection molding machines and die casting machines based upon the
HPM designs but utilizing the engineering, manufacturing and financial strengths of YIZUMI.“It is not only the service
and technical center of YIZUMI in North America; it’s also a very important step of the globalization strategy of the
company. I hope with further global operation of HPM and YIZUMI brands, we can provide our customers worldwide with
our best products and services ,”Richard Yan, CEO of Yizumi.

01 02
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

A5-N Series High-end Servo

Injection Molding Machine
To fulfill the core value of“reliability & stability”in A5-N series medium-large machines, we redefine and
Clamping force: 65-1125 US Tons strictly implement key inspection and performance criteria below:

● Backflow detection variation <1mm

Plasticizing weight deviation<0.5%

Core Customer Value
●

● Platen parallelism (after load) <0.18mm（UN900A5-N）

● Platen parallelism (mold opening to 100mm)<0.54mm（UN900A5-N）

Reliability & Stability ● Force deviation of tie bar <±3%

● Repeatability of clamping force <1%

● Accuracy of mold-open end position <2mm

Data above are QC standards in factory

03 04
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Highly rigid clamping unit

Less platen deformation, better parallelism, less deviation of stress

on tie bars, more precise repeatability of clamping force.

Applicable to high-speed & high-pressure injection molding require-

ment, effectively improving precision of molded parts.

Uniform-stress clamping technology

Uniform distribution of clamping force, less platen deformation .

Lower clamping force is applicable to produce the same part without

flash, protecting platen and mould.

Extended moving platen support

The movable platen is equipped with front heavy-load sliding sup-

ports. The center of gravity of support moves forwards to the mold
mounting surface, preventing the platen from tilting. Machine still
operates steadily when it is loaded with heavy molds.

Extended ejector guiding platen design

Clamping unit Ejector guiding extended, effectively avoiding ejector plate tilting
and improving stability of ejection.

Mechanical structure of clamping unit⸺stable, high-rigidity Uniform distribution of ejector force , precise ejection position with
better ejection performance.

The platen structure is designed with European style and fully optimized parameters and force distribution. High-rigidity materials and
manufacturing processes for base frame ensure the machine is strong, stable and reliable.

05 06
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Integrated linear guide rail support

Machine adopt integrated linear guide rail, horizontal double-carriage design

and double-cylinder injection to ensure injection is reliable & stable.

Integrated linear guide rail support reduces the friction between injection
unit and linear guide rail or tie bar and enhances production repeatability.

Three bearings for 290A5-N and larger models

A deep-groove ball bearing is added to the front of transmission shaft, close

to the screw, to improve the support of transmission shaft, reduce vibration
when it rotates and prolong the service life of thrust bearing.

Proportional back pressure for plasticizing

Proportional back pressure facilitates accurate control by industrial comput-

er and enhances the stability of injection.

Injection Unit Low friction oil seal inside injection cylinder

Mechanical structure of injection unit⸺stable, less friction Injection cylinder adopts low friction oil seal design, fully reducing injection
friction and ensuring longer service life.

Optimized injection structure design improves rigidity of injection unit.

Reduce all frictional resistance during injection molding process enhance the stability & precision of injection.

07 08
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Hydraulic System Control System

Yizumi third generation of energy saving servo technology⸺ High precision control system⸺more accurate control of system pressure, flow,
durable, highly efficient, energy-saving & low noise position & temperature, higher part repeatability, as well as more stable overall
machine performance.

Yizumi’s third-generation energy-saving servo technology

So far, Yizumi has comprehensively grasped the application technology of energy-saving servo system since it was further
studied in 2005. The third-generation servo system has been improved and optimized in the internal structure of motor, Low oil level alarm
the standard of magnetic steel, the selection of oil pump and the development of drive software to achieve superior per-
formance in stability, reliability, durability, energy conservation, efficiency and low noise; the servo system uses 30%-80% Automatic low oil level alarm function prevents gas from

less energy than conventional hydraulic machines. being sucked in due to low oil level, avoiding consequent
instability of hydraulic circuit.

The third-generation servo system

Color mixing signal with EUROMAP-based interface

EUROMAP 67 based programs and plugs for robot

Professional brand-name motor Imported high-pressure gear pump INOVANCE servo drive

Proven by years of practical application and higher configured, the third-generation servo system is stable, reliable and durable and
characterized by high efficiency, energy saving, low noise, strong power and fast response.

Professional control system

Low noise Fast response High performance

A5-N series employs Austria＇s KEBA control system with
user-friendly interface and higher processing speed.
12＇＇TFT color touch screen, visualized graphic parameter
setting, actual parameter values recorded and displayed with
Under the same working conditions, High efficiency gear pump realizes Special high-torque servo motor and curves, more accurate online process analysis
the third-generation servo system fast response injection molding which high pressure gear pump greatly Free programming is available to meet the needs of special
emits 20% lower noise than the previ- can be used in high-precision mold- improve the low speed molding and molds and processes.
Extensible I/O modules can integrate with more functions,
ous generation when producing the ing. continuous pressure-holding perfor-
including temperature control and sequence valve as needed.
same product. mance with excellent repeatability.

09 10
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

UN65A5-N to UN1125A5-N Specifications

DESCRIPTION UN65A5-N UN100A5-N 135A5-N 180A5-N Note:

International specification UNIT 190/600 295/900 420/1200 604/1600
1.Shot volume= cross-sectional area of barrel×injection stroke
INJECTION UNIT
A B A B C A B C A B C 2.Shot weight= shot volume×0.92 (GPPS)

Shot volume
cu in 3.125 4.37 7.116 9.703 12.633 9.984 15.062 18.772 18.168 22.635 27.603 3.We reserve the right to improve products or change
cm3 51.2 71.6 116.6 159 207 163.6 246.8 307.6 297.7 370.9 452.3
g 47 65.9 107 146 190.4 150.5 227.1 283 273.9 341.2 416.1
specifications without prior notice. The product photos in
Shot weight (PS)
oz 1.6 2.3 3.8 5.2 6.7 5.3 8 10 9.7 12 14.7 this catalogue are for reference only.
in 0.866 1.024 1.181 1.378 1.575 1.378 1.693 1.89 1.693 1.89 2.087
Screw diameter
35 43 48
4.Please inform us if you need to process engineering plastics like
mm 22 26 30 40 35 48 43 53

Injection pressure
psi 54099 38725 36666 26919 20624 37260 24656 19827 29443 23627 19377 PVC, PC and PMMA or have special requirements.
Mpa 373 267 252.8 185.6 142.2 256.9 170 136.7 203 162.9 133.6
oz/sec 1.6 2.2 2.9 4 5.2 3.5 5.3 6.6 5.5 6.8 8.4
Injection rate
g/sec 45.2 63.2 83.5 113.7 148.5 99 149 186 156 194 237
Screw L:D ratio 20:1 20:1 24:1 20:1 20:1 24:1 20:1 20:1 22.3:1 20:1 20:1
in/sec 5.16 5.12 4.41 4.61
Max. injection speed
mm/sec 131 130 112 117

in 5.31 6.5 6.69 8.07

Screw stroke
mm 135 165 170 205

Screw speed(stepless) r/min 0 - 256 0 - 266 0 - 271 0 - 296

CLAMPING UNIT
US tons 65 100 135 180
Clamping force
kN 600 900 1200 1600

in 10.24 12.99 14.17 16.54

Opening stroke
mm 260 330 360 420

in x in 12.2 x 12.2 14.17 x 14.17 16.14 x 16.14 18.11 x 18.11

Space between tie bars(H×V)
mm x mm 310 x 310 360 x 360 410 x 410 460 x 460

in 4.72 - 12.99 5.12 - 14.96 5.71 - 17.72 6.30 - 20.47

Mold thickness (Min.-Max.)
mm 120 - 330 130 - 380 145 - 450 160 - 520

in 2.36 3.94 4.72 5.51

Ejector stroke
mm 60 100 120 140

us tons 2.5 3.1 4.7 4.7

Ejector force
kN 22 28 42 42

POWER UNIT
psi 2538 2538 2538 2538
Hydraulic system pressure
Mpa 17.5 17.5 17.5 17.5
hp 18.8 22 23.6 38.5
Pump motor power
kW 14 16.4 17.6 28.7

hp 6.4/7.4 9.3/10.5 12.1/13.5 14.6/16.2

Heater power
kW 4.8/5.5 6.9/7.8 9/10.1 10.9/12.1
Number of temp control zones 5 5 5 5

GENERAL
Dry cycle time sec 1.6 1.8 2 2.4

gal 38 44 51 69
Oil tank capacity
L 145 165 195 260
in 168.5×53.1×72.4 178.3×53.1×74.0 185.8×55.9×75.6 205.9×58.3×769.5
Machine dimensions(L×W×H)
mxmxm 4.28×1.35×1.84 4.53×1.35×1.88 4.72×1.42×1.92 5.23×1.48×2.02
lbm 6380 7480 8800 11000
Design weight
kg 2900 3400 4000 5000

11 12
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

UN65A5-N to UN1125A5-N Specifications

DESCRIPTION UN225A5-N UN290A5-N UN360A5-N UN450A5-N Note:

International specification UNIT 895/2000 1269/2600 1885/3200 2693/4000
1.Shot volume= cross-sectional area of barrel×injection stroke
INJECTION UNIT
A B C A B C A B C A B C 2.Shot weight= shot volume×0.92 (GPPS)

Shot volume
cu in 25.949 31.637 40.522 35.677 45.728 58.733 50.897 65.379 81.667 73.136 91.358 111.607 3.We reserve the right to improve products or change
cm3 425.2 518.4 664 584.6 749.3 962.4 834 1071.3 1338.2 1198.4 1497 1828.8
g 391.2 476.9 610.9 537.8 689.4 885.4 767.3 985.6 1231.1 1102.5 1377.2 1682.5
specifications without prior notice. The product photos in
Shot weight (PS)
oz 13.8 16.8 21.5 19 24.3 31.2 27.1 34.8 43.4 38.9 48.6 59.3 this catalogue are for reference only.
in 1.89 2.087 2.362 2.087 2.362 2.677 2.362 2.677 2.992 2.677 2.992 3.307
Screw diameter
53 60 60 68 76
4.Please inform us if you need to process engineering plastics like
mm 48 53 68 60 76 68 84

Injection pressure
psi 30559 25063 19551 31488 24569 19116 32808 25541 20450 32604 26092 21364 PVC, PC and PMMA or have special requirements.
Mpa 210.7 172.8 134.8 217.1 169.4 131.8 226.2 176.1 141 224.8 179.9 147.3
oz/sec 6.8 8.3 10.6 9.3 11.9 15.3 11.9 15.3 19.1 13 16.2 19.8
Injection rate
g/sec 193 235.3 301 263.7 337.9 434.1 338 434.1 542.3 367.3 458.8 560.5
Screw L:D ratio 22:1 20:1 20:1 22.6:1 20:1 20:1 22.6:1 20:1 20:1 22.3:1 20:1 20:1
in/sec 4.57 5.12 5.12 4.33
Max. injection speed
mm/sec 116 130 130 110

in 9.25 10.43 11.61 12.99

Screw stroke
mm 235 265 295 330

Screw speed(stepless) r/min 0 - 254 0 - 266 0 - 287 0 - 193

CLAMPING UNIT
US tons 225 290 360 450
Clamping force
kN 2000 2600 3200 4000

in 19.29 20.87 25.2 27.56

Opening stroke
mm 490 530 640 700

in x in 20.87 x 20.87 24.02 x 22.44 27.95 x 26.38 29.92 x 27.95

Space between tie bars(H×V)
mm x mm 530 x 530 610 x 570 710 x 670 760 x 710

in 7.09 - 21.65 7.68 - 24.02 8.66 - 25.98 9.45 - 28.74

Mold thickness (Min.-Max.)
mm 180 - 550 195 - 610 220 - 660 240 - 730

in 5.91 6.3 6.69 8.27

Ejector stroke
mm 150 160 170 210

us tons 5.5 8.7 8.7 12.4

Ejector force
kN 49 77 77 110

POWER UNIT
psi 2538 2538 2538 2538
Hydraulic system pressure
Mpa 17.5 17.5 17.5 17.5
hp 48.3 38.35 + 23.6 52.8 + 23.6 52.8 + 30.8
Pump motor power
kW 36 28.6 + 17.6 39.4 + 17.6 39.4 + 23

hp 19.3/22.5 22.3/25.5 29.8/33 35.4/41.4

Heater power
kW 14.4/16.8 16.6/19 22.2/24.6 26.4/30.9
Number of temp control zones 6 6 6 7

GENERAL
Dry cycle time sec 2.7 2.8 3.2 4

gal 86 115 117 150

Oil tank capacity
L 325 435 445 570
in 223.6×65.4×82.3 254.7×73.6×94.1 274.8×73.6×98.4 311.8×85.8×96.5
Machine dimensions(L×W×H)
mxmxm 5.68×1.66×2.09 6.47×1.87×2.39 6.98×1.87×2.50 7.92×2.18×2.45
lbm 13200 18700 24640 35200
Design weight
kg 6000 8500 11200 16000

13 14
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

UN65A5-N to UN1125A5-N Specifications

DESCRIPTION UN540A5-N UN630A5-N UN730A5-N UN900A5-N UN1125A5-N Note:

International specification UNIT 3330/4800 3330/5600 4820/6500 6780/8000 9015/10000
1.Shot volume= cross-sectional area of barrel×injection stroke
INJECTION UNIT
A B C A B C A B C A B C A B C 2.Shot weight= shot volume×0.92 (GPPS)

Shot volume
cu in 102.435 125.137 150.104 102.435 125.137 177.285 135.28 162.273 223.606 194.678 230.074 309.41 263.627 307.543 411.815 3.We reserve the right to improve products or change
cm3 1678.5 2050.5 2459.6 1678.5 2050.5 2905 2216.7 2659 3664 3190 3770 5070 4319.8 5039.4 6748
g 1544.2 1886.5 2262.8 1544.2 1886.5 2673 2039.4 2446.3 3371 2934.8 3468 4664 3974.2 4636.2 6208
specifications without prior notice. The product photos in
Shot weight (PS)
oz 54.5 66.5 79.8 54.5 66.5 94.4 71.9 86.3 119.1 103.7 122.5 164.8 139.9 163.2 219 this catalogue are for reference only.
in 2.992 3.307 3.622 2.992 3.307 3.937 3.307 3.622 4.252 3.622 3.937 4.567 3.937 4.252 4.921
Screw diameter 4.Please inform us if you need to process engineering plastics like
mm 76 84 92 76 84 100 84 92 108 92 100 116 100 108 125

Injection pressure
psi 28804 23569 19653 28804 23569 16621 31560 26310 19000 30864 26136 19421 30284 25976 19377 PVC, PC and PMMA or have special requirements.
Mpa 198.6 162.5 135.5 198.6 162.5 114.6 217.6 181.4 131 212.8 180.2 133.9 208.8 179.1 133.6
oz/sec 16.8 20.5 24.6 16.8 20.5 29 18.7 22.4 30.9 21.1 24.9 33.6 25.2 29.4 39.4
Injection rate
g/sec 475.5 580.9 696.8 475.5 580.9 823.3 529.9 635.7 876 598.4 707 951.3 714.9 833.9 1117.1
Screw L:D ratio 22.1:1 20:1 20:1 22.1:1 20:1 20:1 21.9:1 20:1 20:1 21.7:1 20:1 20:1 21.6:1 20:1 20:1
in/sec 4.49 4.49 4.09 3.85 3.90
Max. injection speed
mm/sec 114 114 104 97.9 99

in 14.57 14.57 15.75 18.9 21.65

Screw stroke
mm 370 370 400 480 550
Screw speed(stepless) r/min 0 - 176 0 - 176 0 - 172 0 - 150 0 - 130

CLAMPING UNIT
US tons 540 630 731 900 1125
Clamping force
kN 4800 5600 6500 8000 10000

in 30.71 33.46 35.43 40.94 48.03

Opening stroke
mm 780 850 900 1040 1220
in x in 32.68 x 31.89 33.46 x 31.89 36.61 x 36.61 39.37 x 39.37 45.67 x 45.67
Space between tie bars(H×V)
mm x mm 830 x 810 850 x 810 930 x 930 1000 x 1000 1160 x 1160
in 10.24 - 31.89 12.99 - 33.46 13.78 - 35.43 15.75 - 39.37 17.72 - 45.67
Mold thickness (Min.-Max.)
mm 260 - 810 330 - 850 350 - 900 400 - 1000 450 - 1160
in 8.66 8.66 11.02 11.02 12.6
Ejector stroke
mm 220 220 280 280 320
us tons 12.4 18.7 20.5 20.5 30.8
Ejector force
kN 110 166 182 182 274
POWER UNIT
psi 2538 2538 2538 2538 2538
Hydraulic system pressure
Mpa 17.5 17.5 17.5 17.5 17.5
hp 74.6 + 30.8 74.6 + 30.8 80.5 + 48.3 80.5 + 52.8 80.5 x 2
Pump motor power
kW 55.4 + 23 55.4 + 23 60 + 36 60 + 39.4 60 x 2
hp 44.4/48.5 44.4/57.7 50.9/63 56.3/68.4 62.4/85.3
Heater power
kW 33.1/36.2 33.1/43 38/47 42/51 46.5/63.6
Number of temp control zones 7 7 7 7 7

GENERAL
Dry cycle time sec 4.5 5.5 6.5 7 8
gal 201 201 264 304 343
Oil tank capacity
L 760 760 1000 1150 1300
in 333.5×87.8×98 343.7×87.8×98 378.3×90.9×102.8 415.4×93.7×103.5 449.2×102.4×104.7
Machine dimensions(L×W×H)
mxmxm 8.46×2.23×2.49 8.73×2.23×2.49 9.61x2.31x2.61 10.55x2.38x2.63 11.41x2.60x2.66
lbm 40260 41800 56100 77000 96800
Design weight
kg 18300 19000 25500 35000 44000

15 16
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Platen Dimensions & Layout Machine Dimensions

A-AT-slot
210
175
3769 567 538
2016

23
14
140

240
110 11 240
75 23 50
40 35 35
8-M12 24

1334

1851
1810
1560
140 70
10

UN65A5-N UN65A5-N

1129
Ø2
Ø100
210
175

Ø101.6
Ø125
140
110
75
40

75
470
310
SR10

837 540
600
48-M16 32
3423
260 120-330

4276 1350
310
470

A-AT-slot
240

605 555
190
4200
14

23

140
105 11
275
2271
275
70 23 100
50 35
8-M12 24

UN100A5-N UN100A5-N

1414

1936
1895
A

1640
140 70
10

Ø3
240
190

1169
A

Ø101.6
140

Ø125
105
70

360
560

SR10
Ø100 4-Ø30

75
44-M16 32 960 652
675
330 130-380

3658
1350
Ø177.8
4531
360
560

A-AT-slot

240 4560 640 590

190 2461
14

23

140
275
275
105 11 100

70 23 35 70
8-M16 24

1484

1966
1960
1710
UN135A5-N UN135A5-N
140 105

10

1204
Ø3

A
Ø101.6
240

Ø125
190
140

75
105

SR10
70

623
410

1135 645
Ø100 4-Ø30

44-M16 32
360 145-450
3943 745
4724 1420
Ø177.8

410
623

A-AT-slot

270 5212 693 633

220 2769
30
18

170
125 12 295
100
295
70 30
50 70

1609
8-M16 24

2065
2045
1795
UN180A5-N UN180A5-N
175 105

1299
A 10
Ø3
270
220

Ø101.6
Ø125
170
125

90
70

460
690

SR10
4-Ø30 Ø100
1235 785
Ø177.8 420 160-520 4453 805
5231
44-M16 32
1482
460
690

17 18
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Platen Dimensions & Layout Machine Dimensions

A-AT-slot
310 5529 733 672
250 2944
210
295

22

37
295
190
16 100
140 50 70
90 38

1708
8-M16 32

2138
2120
1870
1358
175 105
10

Ø3.5
A

UN225A5-N UN225A5-N
310

Ø100

Ø101.6
250

90
Ø160
210
190

A
140

1290 835

177.8
90

101.6
885

530
770
SR10

4798
8-Ø30

44-M20 40 177.8 5804 1659

490 180-550

406.4

530
770

A-AT-slot
390
320
6239 795 772
22

37

250
350
200
180
16 100 3258
38
350
35 140
150
8-M20 40

101.6

1800
UN290A5-N UN290A5-N

280 140

2414
2287
A
10

2037
Ø3.5

1425
320
250

Ø101.6
Ø105
200

Ø160
150
80

406.4
101.6

177.8

825
570

90
SR10

12-Ø30 1475 850

5208 935
177.8 530 195-610
6468
1883
52-M20 40
406.4

610
865

A-AT-slot
390
320

873 850
22

6910
250
37

350
200
180
16 100 3610
38
350
40 140
150
8-M20 40

1955
101.6

UN360A5-N UN360A5-N
280 140

2529
2390
2140
12
Ø3.5

A
Ø
390

10

1520
320

Ø101.6

5
250

Ø200
200

A
150
80

101.6

177.8

406.4

670
950

90
SR10

1620 985
5750
12-Ø30
177.8
640 220-660 6980
1060
64-M20 40
406.4 1875
710
990

A-AT-slot
1032 937
470
400 7730
300 3915
22

37

250 371 371

16 100
200
38 65 140
150

2450
2277
2082
8-M20 40
101.6

1432
UN450A5-N UN450A5-N

90
350 140

6233
A 12
400

1055
Ø4

Ø105
300
250

Ø101.6

7922
200

Ø200
150

2118
100

406.4
177.8
101.6

1030
710

2182
SR15

12-Ø30

60-M24 50 177.8
700 240-730

406.4
760
1080

19 20
 A5-N Series High-end Servo Injection Molding Machine New A5-N, Excellent As Always

Platen Dimensions & Layout Machine Dimensions

A-A T-slot A-A T-slot
500 500
400 400 8464 1072 977
4290

37
22
37

300 300
22

250
16 461 250 16 461 461
200 100 200 100
38 38
150 65 140 150 65 140

1993

2493
2308
2090
177.8 8-M20深40 177.8 8-M20深40

1458
A A Ø105

350 140

350 140
12

90
20

500
500

Ø4

400
400

Ø120 A
1140

Ø4
6706

300
300

Ø101.6
250
250

200
200

101.6
150

150
100
100

8460 2168
152.4

1145
406.4
101.6

101.6

152.4
406.4
177.8

1170
810

177.8

810
R15S SR15
4-Ø45 4-Ø55 2232
12-Ø30
12-Ø30
101.6 68-M24深50 101.6
68-M24深50 880 330-850
406.4 780 260-810
406.4
711.2 711.2
830

UN630A5-N UN540A5-N UN630A5-N

850

UN540A5-N
1165
1210

600 A-A T-slot

475
350
315
28

46

500
280
20 150
210
140 48
115 140

177.8
8-M20深40
A

UN730A5-N UN730A5-N
A

420 140
Ø1
600

20
475

20
350
315
280

Ø6
210
140

Ø101.6
177.8
101.6

152.4
406.4

1320
711.2
930

SR20
8-Ø55
101.6
12-Ø30

48-M24深50 152.4
900 350-900
406.4
711.2
930
1320

670
545
A-A T-slot
420
350
555
28

46

315
280
20 150
210 105
48
140 110
105
177.8
12-M24深48
101.6

UN900A5-N UN900A5-N
670

420 210

Ø1
545

20
420

20
350

Ø6
315
280
210
140

177.8
101.6

152.4
406.4

Ø127
1435
1000
711.2

8-Ø55 SR20
12-Ø30

68-M24深50

152.4
1040 400-1000
406.4
711.2
1000
1435

A-A T-slot
700
560
420
350
600
28

46

280
210 20 150
48 105
140 110
105
177.8
12-M24深48
101.6

UN1125A5-N Ø1 UN1125A5-N
420 280
700

20
560

20
Ø6
420
350
280
210
140

177.8
101.6

152.4
406.4

Ø127
1160
1620
711.2

8-Ø55
SR20
12-Ø30

68-M24深50

152.4
1220 450-1160
406.4
711.2
1160

21 22
1620
 UN65A5-N to UN630A5-N Features
Standard Optional Standard Optional
● Clamping Unit All transducers, weak-current switches and reversing solenoid valves covered with water-proof and rat-bite-proof corrugated pipes ●

Precision transducer for clamping / ejector/injection stroke control ● Multi-level password security ●

Clamping platens / toggles made of highly-rigid ductile iron QT500-7A ● Front and rear safety gates with emergency stop protection ●

Hydraulic gear-type mold height adjusting device ● PDP interface ●

Mechanical /electrical/ hydraulic safety devices ● Statistical process control (SPC) interface ●

Adjustment-free mechanical safety rod ● Reserved interfaces for air blowing, core pull, ejector back protection devices, etc. ●

Wear-resistant manganese steel bands and supporting tracks for movable platen ● Hot runner interface ○

Automatic central lubrication system ● Pneumatic sequence valve ○

Multiple functions of ejector available ● Interface for electric unscrewing device ○

Low pressure mold protection ● Air blowing device with valve ○

Platen with T-slots and mold mounting holes ● Air-assisted injection device ○

One-button automatic mold height adjustment ● Central (networked) monitoring system ○

Automatic clamping force adjustment as needed ● Protective light grid of front and rear safety gates ○

Forced ejector reset ● Display of machine’s energy consumption ○

Safety edges for machine gates ● Special power supply voltage ○

Special mold mounting holes ○ Sequential injection valve gate ○

Heat insulating plate of mold ○ Automatic safety door (UN450A5-N to UN630A5-N) ○

Larger ejection force and ejector stroke ○ Multiple operating languages ○

Increased mold thickness ○ ● Hydraulic System

Magnetic platen ○ EUROMAP 67 based robot interface ●

Mold lifting device ○ Servo pump system ●

Self-lubricated bushes in tie bars ○ High-precision bypass oil filter ●

● Injection Unit Low-noise energy-saving hydraulic circuit ●

Parallel double-cylinder injection system ● SPI standard based ejector hole pattern ●

Low-speed high-torque hydraulic motor ● SPI standard based mold locating hole (stationary platen) ●

Nitrided alloy-steel screw and bimetallic barrel ● Imported hydraulic control valve ●

Energy-saving groove design of barrel (patented design) ● Imported seal ●

Multi-stage PID nozzle and barrel temperature control ● Differential fast mold closing device (UN65A5-N to UN360A5-N) ●

Double-carriage cylinder ● Built-in cooler (UN65A5-N to UN360A5-N) ●

Fully-closed heat retaining cover ● Hydraulic circuit design of mold opening stop ●

Cold start protection ● Automatic oil temperature detection and alarm ●

Automatic purging ● Safety cable for exposed high-pressure hydraulic hose retention ●

Selectable suck-back before or after plasticizing ● A set of core pull and core pull interface with valve ●

Movable hopper (UN65A5-N to UN360A5-N ) ● Mold water-cooling devices with fast connectors ●

Three-bearing drive shaft (UN290A5-N and larger models) ● Synchronized ejection and core pulling system ●

Screw speed detection ● Plasticizing proportional back pressure control ●

Nozzle safety cover (with electrical protection) ● Oil temperature pre-heating system ●

Ceramic heater band ● Variable-displacement pump system ○

Linear guide rail ● Multi-size larger oil pump and motor ○

Dedicated barrel and screw assembly (electroplating, alloy, PC, PMMA, PBT, PA, etc) ○ Multi-size larger plasticizing motor ○

Barrel air-cooling device ○ Synchronized ejection and core pulling (UN65A5-N to UN225A5-N) ○

Spring shut-off nozzle ○ High-response servo injection system with accumulator ○

Increased injection stroke or one-size larger (smaller) injection unit ○ Multiple sets of core pull devices ○

Swivel injection unit (UN290A5-N to UN1125A5-N) ○ Hydraulic unscrewing device ○

Barrel heat-retaining energy-saving device (silicone heat preservation, infrared heating) ○ Glass-tube flowmeter ○

● Electrical System ● Other

Mandatory barrel heating protection ● Operation manual ●

Input/output inspection ● Leveling pad ●

Automatic heat retaining and automatic heating setting ● A toolkit and a precision filter element ●

Ways of switching from injection to holding pressure: time / position / time + position ● Mold clamp ●

12.1'' TFT color touch screen ● Spare parts (details as per sales contract ) ●

Large processes data storage capacity, with USB ports/ CF card ● Dryer ○

Operating languages: Chinese, English, Spanish and Portuguese ● Auto loader ○

Three-color alarm light ● Chiller ○

Color mixing signal interface ● PET preform mold ○

Linear guide ● Thin-wall packaging mold ○

23 24
 UN730A5-N to UN1125A5-N Features
Standard Optional Standard Optional
● Clamping Unit Low-noise hydraulic system ●

Precision transducer for clamping / ejector stroke control ● Hydraulic oil cooling device ●

Clamping platens and toggles made from highly-rigid ductile iron ● Safety retention device for high-pressure hydraulic hose ●

2-stage ejector forward / backward controlled by computer ● Oil level detection ●

Forced ejector back function ● A set of core pull device with extra interface for stationary platen ●

Various ejection function settings ● A set of core pull device with extra interface for moving platen ●

Hydrulic gear-type mold height adjusting device ● Oil pre heating function ●

Mechanical / Electrical / Hydraulic safety devices ● Independent oil temperature control system ●

Wear-resistant manganese steel bands and supporting tracks for movable platen ● Synchronized ejection and core pull ●

Automatic centralized lubrication system ● Unscrewing device ○

Platen with T-slots and mold mounting holes ● High response servo injection system ○

SPI standard based ejector hole pattern ● High response servo mold opening and closing system ○

SPI standard based mold locating hole (stationary platen) ● Plasticizing during mold opening ○

Increased mould thickness (100/200mm) ○ Enlarged oil cooler ○

Mold heat insulating plate ○ One size larger oil pump and motor ○

Special mould fixing hole ○ Extra hydraulic core pull ○

Automatic tie bar extraction device ○ Extra hydraulic unscrewing ○

Self-lubricated bushes in tie bars ○ ● Electrical System

● Injection Unit EU67 robot interface ●

Nitrided alloy-steel screw and bimetallic barrel ● Input / output inspection function ●

Nozzle PID temperature control ● Automatic heat retaining and automatic heating setting ●

Double-carriage cylinder ● Time / position / time + position control of switchover to hold pressure ●

Screw cold start protection function ● Independent adjustment of the action slope ●

Automatic purging ● Core-pull/ unscrewing program interface ●

Selectable suck-back before or after plasticizing ● Processes data locking function ●

Multi-stage barrel PID temperature control. ● 12'' TFT color LCD ●

Automatic injection and plasticizing failure detection ● Operating languages: Chinese, English, Spanish and Portuguese ●

Precision injection/plasticizing transducer ● Three-color alarm light ●

6-stage injection speed / pressure /position ● Color mixing signal interface ●

5-stage holding pressure speed / pressure / time control ● Electrical unscrewing device and interface ○

5-stage plasticizing speed / pressure / time control ● Hot runner interface and connector ○

Screw speed detection ● Air-assisted injection device and connector ○

Extended nozzle ● Air bow device ○

Purge guard (with safety switch) ● Power supply voltage change ○

Proportional back pressure control ● Extra automatic safety door ○

Linear guide rail ● Clamping force testing and display ○

Ceramic heater band ● Sequential injection valve gate ○

Special screw unit (PET/ PA/PC/ PMMA/ TPU/ UPVC) ○ Central (networked) monitoring system ○

Bi-metallic barrel unit ○ ● Other

Blowing device of barrel ○ Operation manual ●

Spring shut-off nozzle ○ Leveling pad ●

Magnetic grate base (with magnetic grates) ○ Hand tools / Hand tools box ●

Electric plasticizing ○ Filter element ●

Hydraulic shut-off nozzle ○ Standard hopper ●

Pneumatic shut-off nozzle ○ Spare parts (details as per sales contract) ●

● Hydraulic System Mold temperature controller ○

Servo pump system ● Auto loader ○

Precision by-pass oil filter ● Dehumidifier ○

System pressure and flow calibration ● Chiller ○

Imported hydraulic control valve ● Drying hopper ○

Imported sea ● Water flow regulator ○

Oil temperature detection and alarml ● PET preform mold ○

Thin-wall packaging mold ○

25 26