Dual-band Panel 790 – 862 880 – 960

Dual Polarization X X
Half-power Beam Width 65° 65°
Adjust. Electr. Downtilt 0°– 12° 0°– 12°
set by hand or by optional RCU (Remote Control Unit)

XXPol Panel 790–862/880–960 65°/ 65° 14.5/15dBi 0°–12°/0°–12°T

Type No. 80010667
Frequency range 790–862 880–960
790 – 862 MHz 880 – 960 MHz
Polarization +45°, –45° +45°, –45°
Average gain (dBi) 14.3 ... 14.4 ... 14.1 14.8 ... 15.0 ... 14.6
Tilt 0° ... 6° ... 12° 0° ... 6° ... 12°
Horizontal Pattern:
Half-power beam width 68° 64°
Front-to-back ratio, copolar (180°±30°) > 25 dB > 25 dB
Cross polar ratio
Maindirection 0° 20 dB 20 dB
Sector ±60° > 10 dB > 10 dB
Vertical Pattern:
Half-power beam width 15.2° 13.9°
Electrical tilt, continuously adjustable 0°– 12° 0°– 12°
Min. sidelobe suppression for 0° ... 6° ... 12° T 0° ... 6° ... 12° T
first sidelobe above main beam ≥ 17 ... 16 ... 15 dB ≥ 17 ... 15 ... 15 dB

Impedance 50 Ω
VSWR < 1.5
Isolation: Intrasystem > 28 dB, Typ. > 30 dB
Isolation: Intersystem > 28 dB, Typ. > 30 dB (790–862 // 880–960 MHz)
Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier)
Max. power per input 350 W (at 50 °C ambient temperature)

880 – 960 MHz: +45°/ –45° Polarization

64°
125°

13.9°
790– 862 790– 862 880– 960 880 – 960
–45° +45° –45° +45°
10 10

3
dB

dB

3
7-16 7-16 7-16 7-16
0
0

Horizontal Pattern Vertical Pattern Mechanical specifications

0°– 12° electrical downtilt
Input 4 x 7-16 female
Subject to alteration.

Connector position Bottom

790 – 862 MHz: +45°/ –45° Polarization Adjustment 2 x, Position bottom
mechanism continuously adjustable
Wind load Frontal: 630 N (at 150 km/h)
68°
130° Lateral: 220 N (at 150 km/h)
Rearside: 730 N (at 150 km/h)
15.2°
Max. wind velocity 200 km/h
936.4041/b

Height/width/depth 1355 / 303 / 99 mm

10 10
Category of
M (Medium)
3 mounting hardware
dB

dB

3
Weight 14 kg / 16 kg (clamps incl.)
0
0
Packing size 1681 x 317 x 127 mm
Horizontal Pattern Vertical Pattern Scope of supply Panel and 2 units of clamps
0°– 12° electrical downtilt for 50 – 115 mm diameter

Internet: www.kathrein.de 80010667 Page 1 of 2

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information

Accessories 72
64

9
Weight
Type No. Description Remarks Units per antenna
approx.

738546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2 (included in the scope

of supply)
731651 1 clamp Mast: 28 – 60 mm diameter 0.8 kg 2 (order separately if required)
85010002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 2 (order separately if required)
85010003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 2 (order separately if required)
737978 1 downtilt kit Downtilt angle: 0° – 15° 2.8 kg 1 (order separately if required)
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.

1407
1447
1355
Material: Reflector screen: Weather-proof aluminum.
Fiberglass housing: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-
mental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Adjustment
Environmental tests: Kathrein antennas have passed environmental tests as recommended mechanism
in ETS 300 019-2-4. The homogenous design of Kathreinʼs antenna with integrated
scale
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
Layout of interface:
99*

111*
40

50
Bottom view
303* * Dimensions refer to radome Subject to alteration.

Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
936.4041/b

dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.

Page 2 of 2 80010667 Internet: www.kathrein.de

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973