TC4049,4050BP/BF/BFN

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TC4049BP,TC4049BF,TC4049BFN,
TC4050BP,TC4050BF,TC4050BFN

TC4049B Hex Buffer/Converter (inverting type)

TC4050B Hex Buffer/Converter (non-inverting Note: xxxFN (JEDEC SOP) is not available in
type) Japan.
TC4049BP, TC4050BP

TC4049B, TC4050B contain six circuits of buffers. TC4049B is

inverter type and TC4050B is non-inverter type.
Since one TTL or DTL can be directly driven having large
output current, these are useful for interfacing from CMOS to
TTL or DTL. As voltage up to VSS + 18 volts can be applied to the
input regardless of VDD, these can be also used as the level
converter IC’s which converts CMOS logical circuits of 15 volts or
10 volts system to CMOS/TTL logical circuits of 5 volts system.
Ideal switching characteristic has been obtained by the circuit TC4049BF, TC4050BF
diagram of three stage inverters for TC4049B and two stage
inverters for TC4050B.

TC4049BFN, TC4050BFN

Weight
DIP16-P-300-2.54A : 1.00 g (typ.)
SOP16-P-300-1.27A : 0.18 g (typ.)
SOL16-P-150-1.27 : 0.13 g (typ.)

1 2007-10-01
 TC4049,4050BP/BF/BFN
Pin Assignment
TC4049B TC4050B

Circuit Diagram
1/6 TC4049B

1/6 TC4050B

Absolute Maximum Ratings (Note)

Characteristics Symbol Rating Unit
DC supply voltage VDD VSS − 0.5~VSS + 20 V
Input voltage VIN VSS − 0.5~VSS + 20 V
Output voltage VOUT VSS − 0.5~VDD + 0.5 V
DC input current IIN ±10 mA
Power dissipation PD 300 (DIP)/180 (SOIC) mW
Operating temperature range Topr −40~85 °C
Storage temperature range Tstg −65~150 °C

Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).

2 2007-10-01
 TC4049,4050BP/BF/BFN
Operating Ranges (VSS = 0 V) (Note)

Characteristics Symbol Test Condition Min Typ. Max Unit

DC supply voltage VDD ⎯ 3 ⎯ 18 V

Input voltage VIN ⎯ 0 ⎯ 18 V

Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VDD or VSS.

Static Electrical Characteristics (VSS = 0 V)

Test Condition −40°C 25°C 85°C
Sym-
Characteristics VDD Unit
bol
Min Max Min Typ. Max Min Max
(V)
5 4.95 ⎯ 4.95 5.00 ⎯ 4.95 ⎯
High-level output ⎪IOUT⎪< 1 μA
VOH 10 9.95 ⎯ 9.95 10.00 ⎯ 9.95 ⎯ V
voltage VIN = VSS, VDD
15 14.95 ⎯ 14.95 15.00 ⎯ 14.95 ⎯
5 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05
Low-level output ⎪IOUT⎪< 1 μA
VOL 10 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05 V
voltage VIN = VSS, VDD
15 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05
VOH = 4.6 V 5 −0.73 ⎯ −0.65 −1.2 ⎯ −0.58 ⎯
VOH = 2.5 V 5 −2.40 ⎯ −2.10 −3.9 ⎯ −1.90 ⎯
Output high current IOH VOH = 9.5 V 10 −1.80 ⎯ −1.65 −2.5 ⎯ −1.35 ⎯ mA
VOH = 13.5 V 15 −4.80 ⎯ −4.30 −8.0 ⎯ −3.50 ⎯
VIN = VSS, VDD
VOL = 0.4 V 5 3.8 ⎯ 3.2 6.4 ⎯ 2.9 ⎯
VOL = 0.5 V 10 9.6 ⎯ 8.0 16.0 ⎯ 6.6 ⎯
Output low current IOL mA
VOL = 1.5 V 15 28.0 ⎯ 24.0 48.0 ⎯ 20.0 ⎯
VIN = VSS, VDD
VOUT = 0.5 V, 4.5 V 5 3.5 ⎯ 3.5 2.75 ⎯ 3.5 ⎯
VOUT = 1.0 V, 9.0 V 10 7.0 ⎯ 7.0 5.50 ⎯ 7.0 ⎯
Input high voltage VIH V
VOUT = 1.5 V, 13.5 V 15 11.0 ⎯ 11.0 8.25 ⎯ 11.0 ⎯
⎪IOUT⎪ < 1 μA
VOUT = 0.5 V, 4.5 V 5 ⎯ 1.5 ⎯ 2.25 1.5 ⎯ 1.5
VOUT = 1.0 V, 9.0 V 10 ⎯ 3.0 ⎯ 4.50 3.0 ⎯ 3.0
Input low voltage VIL V
VOUT = 1.5 V, 13.5 V 15 ⎯ 4.0 ⎯ 6.75 4.0 ⎯ 4.0
⎪IOUT⎪ < 1 μA
5
Input “H” level IIH VIH = 18 V 18 ⎯ 0.1 ⎯ 10− 0.1 ⎯ 1.0
μA
current “L” level IIL VIL = 0 V 18 ⎯ −0.1 ⎯ −10 −5
−0.1 ⎯ −1.0
5 ⎯ 1 ⎯ 0.002 1 ⎯ 30
Quiescent supply VIN = VSS, VDD
IDD 10 ⎯ 2 ⎯ 0.004 2 ⎯ 60 μA
current (Note)
15 ⎯ 4 ⎯ 0.008 4 ⎯ 120

Note: All valid input combinations.

3 2007-10-01
 TC4049,4050BP/BF/BFN
Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF)
Test Condition
Characteristics Symbol Min Typ. Max Unit
VDD (V)
5 ⎯ 60 160
Output transition time
tTLH ⎯ 10 ⎯ 30 80 ns
(low to high)
15 ⎯ 25 60
5 ⎯ 120 60
Output transition time
tTHL ⎯ 10 ⎯ 10 40 ns
(high to low)
15 ⎯ 8 30
5 ⎯ 60 120
Propagation delay time
tpLH ⎯ 10 ⎯ 35 65 ns
(low to high)
TC4049B

15 ⎯ 30 50
5 ⎯ 40 60
Propagation delay time
tpHL ⎯ 10 ⎯ 20 30 ns
(high to low)
15 ⎯ 15 20
5 ⎯ 50 130
Propagation delay time
tpLH ⎯ 10 ⎯ 30 70 ns
(low to high)
TC4050B

15 ⎯ 25 55
5 ⎯ 30 70
Propagation delay time
tpHL ⎯ 10 ⎯ 17 35 ns
(high to low)
15 ⎯ 14 25
Input capacitance CIN ⎯ ⎯ 5 7.5 pF

Waveform for Measurement of Dynamic Characteristics

Waveform

4 2007-10-01
 TC4049,4050BP/BF/BFN
Package Dimensions

Weight: 1.00 g (typ.)

5 2007-10-01
 TC4049,4050BP/BF/BFN
Package Dimensions

Weight: 0.18 g (typ.)

6 2007-10-01
 TC4049,4050BP/BF/BFN
Package Dimensions (Note)

Note: This package is not available in Japan.

Weight: 0.13 g (typ.)

7 2007-10-01
 TC4049,4050BP/BF/BFN

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

• The information contained herein is subject to change without notice.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.

• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.

• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.

• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.

• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.

8 2007-10-01