11900 300

4T12 - 15 - 200cc 4T12 - 15 - 200cc

25T12-02-200c\c T2
25T12-02-200c\c T2
63T16-01-200c\c T1
25T12 - 14 -
200CC Links

25T12-04-200c\c B2 25T12-04a-200c\c B2
63T16 - 14 - 200 B1
63T16 - 07a - 150 cc NF
Wing walls

63T16 - 07a - 150 cc FF

Gabions
2000 2000
SLOPE 0.5%
84T12-09-150c\c T1 33T12-10-150c\c T2

84T12-11-150c\c B1 33T12-12-150c\c B2

LONGITUDINAL DETAIL SECTION 1-1

12500

Cut off beam

8mm scroring scheck in both ditections

4900
300 300 1700 300 1700 300 300
63T16-01-200c\c T1
25T12-02-200c\c T2

66T12 - 11- 200 cc

63T12-13-200c\c
6T12 - 12 - 200cc
63T16-03-200c\ B1 25T12-04-200c\c B2
63T16-03-200c\c B1

300 300
63T12-13-200c\c

63T12-07-200c\c FF
63T16-07a-200c\c FF 63T12-07-200c\c FF
63T16-06-200c\c NF 63T16-7a-200c\c

2000 2000

63T16-01-200c\ T1 CUT OFF BEAM DETAILS

9T12-05-250c\c FF 9T12-05-250c\c NF
9T12-05-250c\c FF 9T12-05-250c\c FF

9T12-05-250c\c NF 300 300

84T12-09-150c\c T1
33T12-10-150c\c T2
63T12-13-200c\c

500 2000
C15 CONCRETE
BLINDING A
12500
500mm MIN HARCORE 84T12-11-150c\c B1 33T12-12-150c\c B2 63T12-13-200c\c
PLACED BELOW THE
4 X 12T12-03-200c\c
BOX CULVERT TO
THE ENGINEERS SATISFACTION

TOP SLAB REINFORCEMENT DETAILS B B

12500 4 X 12T12-04-200c\c

CROSS SECTION THROUGH BOX CULVERT

A
2500

WING WALL LAYOUT

500 2000

84T12-11-150c\c B1 300

14T10-01-200c\c 14T10-02-200c\c NOTES:

1.Excavation to be confirmed by the Engineer
11T10-07-250c\c 13T10-05-200c\c

2. Weak pockets of bearing strata to be dug out and filled

with 1:4:8 mass concrete.
3. CONCRETE MIXES
(a) Mass concrete to have a minimum works cube strength
4 X 13T12-05-200c\c
13T12-06-200c\c of 30N/mm^2 at 28days
4 X 11T12-07-250c\c C25 OUTLET

84T12-09-150c\c T1
SLAB APRON
WITH R8-200c/c 4 X 11T10-08-250c\c 8T12-10-200c\c (b) Reinforced concrete to have a minimum works cube
4 X 11T10-08-250c\c SCOUR CHECK

700 13T12-04-200c\c strength of 30N/mm^2 at 28days with 20mm maximum

4 X 13T10-06-200c\c
aggregate size.
4. REINFORCEMENT
1500 (a) High Yield bars to be square twisted cold formed bars to
2500 13T12-03-200c\c
8T12- 09 - 200cc BS4461 and are marked 'T'on these drawings.

(b) Mild steel bars Marked 'R' on these dwgs to be round bars
to BS 4483.
12500 SECTION A - A THROUGH WING WALL
SECTION B -B THROUGH WING WALL
5.MINIMUM COVER TO ALL STEEL IN
(i) base slab =40mm
BOTTOM SLAB REINFORCEMENT DETAILS (ii)Deck =25mm
(iii) Slabs = 40mm
(iv) Walls =30mm

CLIENT: STRUCTURAL ENG: DRAWING TITTLE:

WAKISO DISTRICT LOCAL GOVERNMENT BOX CULVERT LAYOUT DETAILS
NO REVISION

DESIGNED BY: DRAWN BY: JOB NO: DRG NO:

NO DATE DESCRIPTION
D.K D.K 2017/C/04 02
PROJECT: QUANTITY SURVEYOR:

PROPOSED 2mX2m TWIN CELL BOX CHECKED BY: SCALE: DATE: CLIENT'S SIGNATURE:

CULVERT D.K 1:50,1:75 AUG 2018