W100

WEIGHT INDICATOR

Instrument
Manager

DESCRIPTION MAIN FUNCTIONS

 Weight indicator in DIN box suitable for front panel mounting.  Connections to:
 Dimensions: 96x48x130 mm (drilling template: 92x45 mm). - PLC via analog output (on request);
 6-digit semi-alphanumeric red LED display (14 mm height). - PC/PLC via RS485/RS232 (up to 99 instruments with line
 8 signalling LED. repeaters, up to 32 without line repeaters);
 4-key keyboard. - remote display and printer via RS485/RS232;
 IP54 front panel protection rating (IP65 front optional). - up to 8 load cells in parallel by junction box;
 Real-time clock/calendar with buffer battery. - intelligent junction box or other multichannel instruments: allow
the use of advanced functions as digital equalization, load
 Extractable screw terminal blocks. distribution analysis and automatic diagnostics.
 The instrument can be configured and managed using the free
“Instrument Manager” PC software, which you can download from  Digital filter to reduce the effects of weight oscillation.
www.laumas.com.  Theoretical calibration (via keyboard) and real calibration (with
sample weights and the possibility of weight linearization up to
8 points).
INPUTS/OUTPUTS AND COMMUNICATION  Tare weight zero setting.
 Automatic zero setting at power-on.
 RS485/RS232 serial ports for communication via protocols  Gross weight zero tracking.
ModBus RTU, ASCII Laumas bidirectional or continuous one way  Semi-automatic tare (net/gross weight) and preset tare.
transmission.  Semi-automatic zero.
 5 relay outputs controlled by the setpoint values or via protocols  Displaying of the maximum weight value reached (peak).
(4 outputs if analog output is present).  Direct connection between RS485 and RS232 without converter.
 3 optoisolated PNP digital inputs: status reading via serial  Hysteresis and setpoint value setting.
communication protocols (2 inputs if analog output is present).  Weight value printing with date and time via keyboard or external
 1 load cell dedicated input. contact.
 Current or voltage 16 bit optoisolated analog output (option on request).  The indicator can be used as a remote display with setpoint.
 12 groups selection by 5 setpoint via external selector switch or
contact (option on request).

CE-M version: 2014/31/EU-EN45501:2015-OIML R76:2006

 System parameters management protected by qualified access
via software (password), hardware or fieldbus.
 Weight subdivisions displaying (1/10 e).
 Three operation mode: single interval or multiple range or
multi-interval.
 Net weight zero tracking.
 Calibration.
 Alibi memory (option on request).
 The following values can be printed via keyboard or external
contact: gross weight, net weight, tare, preset tare, date, time,
On request: label support for initial verification ID code (alibi memory).
Re v. 0. 0

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com
 W100
WEIGHT INDICATOR

CERTIFICATIONS

OIML R76:2006, class III, 3x10000 divisions, 0.2 μV/VSI / OIML R61 - WELMEC Guide 8.8:2011 (MID)

UL Recognized component - Complies with the United States and Canada standards

Complies with the Eurasian Custom Union standards

CERTIFICATIONS ON REQUEST
Conformity assessment (initial verification) in combination with Laumas weighing module
Support for metric label (dimensions: 124x77x1.5 mm)
NMI Trade Approved - Complies with the Australian standards for legal use with third parties

Complies with the regulations of the Russian Federation for legal use with third parties

TECHNICAL FEATURES

Power supply and consumption 12÷24 VDC ±10%; 5 W

Number of load cells • Load cells supply up to 8 (350 Ω) - 4/6 wires • 5 VDC/120 mA

Linearity • Analog output linearity <0.01% full scale • <0.01% full scale

Thermal drift • Analog output thermal drift <0.0005% full scale/°C • <0.003% full scale/°C

A/D Converter 24 bit (16000000 points) - 4.8 kHz

Divisions (with measurement range ±10 mV and sensitivity 2 mV/V) ±999999 • 0,01 μV/d
Measurement range ±39 mV
Usable load cells sensitivity ±7 mV/V
Conversions per second 300/s
Display range ±999999
Decimals • Display increments 0÷4 • x1 x2 x5 x10 x20 x50 x100
Digital filter • Readings per second 10 levels • 5÷300 Hz

Relay outputs 5/4 - max 115 VAC/150 mA

Optoisolated digital inputs 3/2 - 5÷24 VDC PNP

Serial ports RS485, RS232
Baud rate 2400, 4800, 9600, 19200, 38400, 115200 (bit/s)
16 bit = 65535 divisions. 0÷20 mA; 4÷20 mA (up to 300 Ω)
Optoisolated analog output (option on request)
0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ)
Humidity (condensate free) 85%
Storage temperature -30 °C +80 °C
Working temperature -20 °C +60 °C

Relay outputs 5/4 - max 30 VAC, 60 VDC/150 mA

Working temperature -20 °C +50 °C

Equipment to be powered by 12-24 VDC LPS or Class 2 power source

METROLOGICAL SPECIFICATIONS OF TYPE-APPROVED INSTRUMENTS

Applied standards 2014/31/UE - EN45501:2015 - OIML R76:2006

Operation modes single interval, multi-interval, multiple range

Accuracy class III or IIII

Maximum number of scale verification divisions 10000 (class III); 1000 (class IIII)

Minimum input signal for scale verification division 0.2 μV/VSI

Working temperature -10 °C +40 °C
Re v. 0. 0

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com
 W100
WEIGHT INDICATOR

OPTIONS ON REQUEST

ACCESSORIES CODE

IP65 panel gasket. OPZW48X96IP65

INTERFACES

Optoisolated 16 bit analog output.

OPZW1ANALOGICA
One input and one output not available.

Additional RS485 port.

OPZW1RS485
One input and one output not available.

Weight reading from 0-10 VDC input (15 kΩ). OPZWING010

Weight reading from 4-20 mA input (120 Ω). OPZWING420

Select one option among those marked with an asterisk.

EXPANSIONS

12 groups selection by 5 setpoint via external selector switch. EC

12 groups selection by 5 setpoint via external contact. E

Simultaneous use of E/EC option with the analog output. OPZWAEC

External 5-relay module to increase the capacity of SPDT contacts to

RELE5M
115 VAC/2 A.

Select one option among those marked with an asterisk.

APPLICATIONS - SOFTWARE

Alibi memory. OPZWALIBI

Re v. 0. 0

The Company reser ves the right to make changes to the technical data, drawings and images without notice.

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com