Spec Sheet

DELL EMC INTEGRATED

DATA PROTECTION
APPLIANCE (IDPA)
SIMPLY POWERFUL DATA PROTECTION AT A LOW COST-TO-
PROTECT.3 GUARANTEED.

The IDPA simplifies deployment and management, while delivering powerful, enterprise-class data protection capabilities
for mid-size and enterprise organizations at a low cost-to-protect than competing solutions.3
It is a converged solution that offers complete backup, replication, recovery, deduplication, instant access and restore,
search & analytics, seamless VMware integration—plus, cloud readiness with disaster recovery and long-term retention to
the cloud—all in a single appliance.
The IDPA delivers a low cost-to-protect3 and is guaranteed under the Future-Proof Program.

Specifications

Table 1. IDPA Performance and Capacity

Features DP4400 DP5800 DP8300 DP8800

MAXIMUM THROUGHPUT1 Up to 9 TB/hr Up to 32 TB/hr Up to 41 TB/hr Up to 68 TB/hr

MAXIMUM LOGICAL CAPACITY1,2 4.8 PB 14.4 PB 36 PB 50 PB

W/ CLOUD TIER 14.4 PB2 43.2 PB 108 PB 150 PB

MAXIMUM USABLE CAPACITY 8 to 96 TB4 96 to 288 TB 192 to 720 TB 624 to 1 PB

W/ CLOUD TIER Up to 288 TB2 Up to 864 TB Up to 2.16 PB Up to 3 PB

PROCESSOR Intel Xeon Intel Xeon Intel Xeon Intel Xeon

SAS 4TB or SAS 4 TB SAS 4 TB SAS 4 TB

DRIVE TYPE
SAS 12 TB
8x RJ45 or 8x 4x40GbE Customer uplinks; Each Quad SFP port can be
BUILT- IN NETWORKING SFP Optical links split to 4x10GbE uplinks; Only two required
(only two req’d) 4

DELL EMC INTEGRATED DATA PROTECTION APPLIANCE (IDPA)

© 2020 Dell Inc. or its subsidiaries.

 Specifications
Table 1 (cont.). IDPA Performance and Capacity

Features DP4400 DP5800 DP8300 DP8800

WEIGHT (LBS) 72.8 lbs.6 450 lbs. 734 lbs. 846 lbs.

17.09 x 28.17 x 40U rack Height: 75 in (190.8 cm);

3.42 (inches Width: 24.0 in (61.1 cm); Depth: 39.0 in (99.2 cm)
DIMENSIONS WDH)
434 x 715.5 x
86.8 (mm WDH)
POWER (100-120 / 200-240 V ≈ 475 VA (MAX @ 1,989 VA 3,117 VA 3,865 VA
50/60HZ) 35°C)
THERMAL RATING (BTU/HR) 1620 5,935 9,479 14,243

OPERATING TEMPERATURE / 10°C to 35°C, 10°C to 35°C, 10°C to 35°C, 10°C to 35°C,
ALTITUDE 35°C at 7,500 ft. 35°C at 7,500 ft. 35°C at 7,500 ft. 35°C at 7,500 ft.
NON-OPERATING -40°C to +65°C -40°C to +65°C -40°C to +65°C -40°C to +65°C
(TRANSPORTATION) (-40°F to +149°F) (-40°F to +149°F) (-40°F to +149°F) (-40°F to +149°F)
TEMPERATURE
10% to 80% 20% to 80% 20% to 80% 20% to 80%
relative humidity non-condensing non-condensing non-condensing
with 29°C
OPERATING HUMIDITY
(84.2°F),
maximum dew
point

IDPA Rack
Power configuration
Single phase is standard, optional 3-phase. Four power inlet connections. Two power domains (base and extended), each
redundant
Plug types
NEMA L6-30p or IEC 60309 332P6
Power capacity
DP5800/8300/8800: 200-240 V~, single-phase, 47-63 Hz, 4,800 VA (base configuration) 9,600 VA (extended
configuration)
DP4400: 100-240 V~ auto-ranging, single-phase, 47-63 Hz, 475 VA
AC protection
30A site circuit breaker on each power domain
Dimensions
40U available rack capacity
Height: 75 in (190.8 cm); Width: 24.0 in (61.1 cm); Depth: 39.0 in (99.2 cm)
Weight: 380 lbs. (173 kg) when empty
DS60 EXPANSION SHELF
External interface (host/expansion)
Quad 8 lane 12 Gb/s serial attached SCSI II (SAS) ports per Link Control Card (LCC). Half of each port is blocked
allowing the use of standard mini-SAS-HD connectors. One port is used for the host connection and the other is used for
expansion. The host controller runs at 6Gb/s to the DS60.
Connector type
SFF-8088 connectors (mini-SAS)
SAS cable length
Up to 5 meters
Disk drives
60-drive bays per DS60 expansion shelf, support low profile, one inch high, 3.5-inch form factor drives
SAS (6 Gb/s), 4 TB, 7200 RPM
Dimensions
Height: 8.75 in (22.23 cm) 5U (4U plus 1U cable management tray)
Width including rails: 17.50 in (44.45 cm)
Depth (chassis only): 34.5 in (87.63 cm)
Maximum depth (fully configured): 36.4 in (92.46 cm)
Weight: 225.0 lbs. (90.7 kg) (with 60 HDD installed)
Operational
Power: 980 VA or 931W (200-240V ~, 47 to 63 Hz)
Thermal Rating: 3177 BTU/hr.
Operating:
Ambient temperature: 41o F to 104o F (5o C to 40o C)
Temperature gradient: 18o F/hr. (10o C/hr.)
Relative humidity extremes: 20% to 80% noncondensing
Elevation: -50 to 7500 ft. (-16 to 2300 m)
Non-Operating (Transportation):
Ambient temperature: -40o F to 149o F (-40o C to 65o F)
Temperature gradient: 45o F/hr. (25o C/hr.)
Relative humidity: 10% to 90% noncondensing
Elevation: -50 to 35,000 ft. (-16 to 10,600 m)
ES30 EXPANSION SHELF
External interface (host/expansion)
Dual 4 lane 6 Gb/s serial attached SCSI II (SAS) ports per Link Control Card (LCC)—one for host and one for expansion
Connector type
SFF-8088 connectors (mini-SAS)
SAS cable length
Up to 5 meter
Disk drives
15-drive bays per ES30 expansion shelf, support low profile, one inch high, 3.5-inch form factor drives
SAS (6 Gb/s), 3TB, 7200 RPM
Dimensions
Height: 5.25 in (13.34 cm)
Width: 19.0 in (48.3 cm)
Depth: 14.0 in (35.56 cm)
Weight: 68 lbs (30.8 kg)
Operational
Power (VA): 280VA or 235W, (100-240V ~, 47 to 63 Hz)
Thermal Rating: 800 BTU/hr
Operating Temperature:
Ambient temperature: 41o F to 104o F (5o C to 40o C)
Temperature gradient: 18o F/hr (10o C/hr)
Relative humidity extremes: 20% to 80% noncondensing
Elevation: -50 to 7500 ft (-16 to 2300 m)
Non-Operating (Transportation) Temperature:
Ambient temperature: -40o F to 149o F (-40o C to 65o F)

Learn More about Dell

EMC IDPA solutions Contact a Dell Technologies Expert

1.
Top-end values are maximums – actual capacity & throughput depends on application workload, deduplication, and other settings.
2.
Mix of typical enterprise backup data (file systems, databases, email, developer files). The low end of capacity range represents a full backup weekly or monthly, incremental backup
daily or weekly, to system capacity. The top end of the range represents full backup daily, to system capacity. All capacity values are calculated using Base10 (i.e., 1 TB =
1,000,000,000,000 bytes).
3.
Based on ESG Technical Review commissioned by Dell Technologies, “Efficiently Protect Virtual Environments with Integrated Data Protection Appliances from Dell EMC”,
January 2020, comparing Dell EMC IDPA DP5800 vs. a leading competitive hyperconverged data protection appliance solution from Vendor X. Actual results may vary. If
starting at less than 24TB, hardware upgrade kit is required to bridge from 24TB to larger capacities. The upgrade is expected to take up to 90 minutes to complete.
4.
RJ45 or SFP retrofit option will provide flexibility for existing DP4400 customers to better accommodate to their lab networking requirements. These network cards are customer
installable and configurable.
5.
Does not include the environmental requirements for capacity shelves. For a specific IDPA capacity configuration, the appropriate capacity for the installed DS60 Expansion shelves
must be added to the configuration (see below).
6.
Weight is of a fully populated DP4400
7.
Dell EMC Information Technology Equipment is compliant with all currently applicable regulatory requirements for Electromagnetic Compatibility, Product Safety, and
Environmental Regulations where placed on market. Regulatory information and verification of compliance is available at Dell Regulatory Compliance site.
http://dell.com/regulatory_compliance

© 2020 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC and other trademarks are
trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners. Reference Number: h16034