Standard Profile

10-2015-V.03
All rights reserved.
No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
Standard Profiles
SP - A GULF EXTRUSIONS 03

SP - B QUALITY AND CERTIFICATIONS 04 - 09

SP - C EQUAL ANGLES 10

SP - D UNEQUAL ANGELS 11

SP - E CHANNELS 12-13

SP - F T-SECTIONS 14

SP - G RECTANGULAR TUBES 15-17

SP - H SQUARE TUBES 18

SP - I ROUND TUBES 19-20

SP - J FLAT BARS 21-22

SP - K I-SECTIONS 23

SP - L RODS 24
GULF EXTRUSIONS SP-A

GULF
EXTRUSIONS
Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded
in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most
innovative and reliable companies in the Middle East.

Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s
largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants
in the region.

Gulf Extrusions quality products can be seen in many of today’s progressive structures. The
company was formed with the sole purpose to meet the increasing demands for aluminium
extrusions in domestic, regional and international markets.

Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per
annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized
finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries
ranging from architectural to transportation, engineering to structural sections, components for
household items, HVAC and customized products.

During the progressive stages of Gulf Extrusions, from its inception to expansion, the company
not only has acquired a majority share in the local market, it has also made its presence felt
globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa,
Europe and Canada.

Our commitment and utmost priority is to provide customers with the finest quality of
aluminium extrusions.

Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.

3
SP-B QUALITY STANDARD & CERTIFICATIONS

Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is
dedicated to respond and deliver on time, high quality, tailor-made and cost effective products.
The management and staff are committed to implement a comprehensive and integrated Quality
Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.

INTERNATIONAL STANDARD COMPLIANCE

Extrusions Dimensions Tolerances: Powder Coated Finish: Anodizing Finish:

• BS EN 755 - 9:2008 • BS:6496 Clause: 10.4, 10.5, • BS EN 12373-1 2001 Clause 7

• BS EN 12020 - 2:2008 10.6, 10.7 & 10.8 (BS:6161 Part 6)
• DIN 1748, DIN 17615 • ISO 2360 / 2813 / 2409 / 2931 • BS:3987 Clause 2, 3, 5, 6
• ASTM B221 • Minimum Film • Appendix- A, B, C, D, E,
Thickness – 60 Microns F, G, H, J, K, L Minimum Film
Thickness- 16 Microns

PRODUCT QUALITY CERTIFICATES

Qualicoat (European Powder Coaters Association):

• A quality label for coating on metal for Architectural Applications
• A product license under the control of EWAA (European Wrought Aluminium Association)
in Zurich Switzerland

Qualanod (European Anodizers Association):

• A quality label organization to guarantee high quality Aluminium Anodizing.
• A product license under the control of EWAA (European Wrought Aluminum Association)
in Zurich Switzerland

• SASO

• ESMA

Health & Safety:

OHSAS 18001
• OHSAS 18001 (Certification for occupational health & safety management)

Management:
• ISO 9001 (Quality Management System)

• ISO/TS 16949:2009 (Management System)

Environment:
• ISO 14001 (Environment Management System)

Membership in International Organization:

• AAC member (Aluminium Anodizers Council - USA)
• AEC member (Aluminum Extruders Council - USA)
• DIN EN 15088

4
QUALITY STANDARD & CERTIFICATIONS SP-B

CHEMICAL COMPOSTIONS

ALLOY 6005A ALLOY 6060

Element Minimum Maximum Element Minimum Maximum

Si 0.50 0.90 Si 0.30 0.60

Fe - 0.35 Fe 0.10 0.30

Cu - 0.30 Cu - 0.10

Mn - 0.50 Mn - 0.10

Mg 0.40 0.70 Mg 0.35 0.60

Cr - 0.30 Cr - 0.05

Zn - 0.20 Zn - 0.15

Ti - 0.10 Ti - 0.10

Other Each - 0.05 Other Each - 0.05

Other Total - 0.15 Other Total - 0.15

Aluminium Remainder Aluminium Remainder

ALLOY 6063 ALLOY 6082

Element Minimum Maximum Element Minimum Maximum

Si 0.20 0.60 Si 0.70 1.30

Fe - 0.35 Fe - 0.50

Cu - 0.10 Cu - 0.10

Mn - 0.10 Mn 0.40 1.00

Mg 0.45 0.90 Mg 0.60 1.20

Cr - 0.10 Cr 0.04 0.15

Zn - 0.10 Zn - 0.20

Ti - 0.10 Ti - 0.10

Other Each - 0.05 Other Each - 0.05

Other Total - 0.15 Other Total - 0.15

Aluminium Remainder Aluminium Remainder

ALLOY 6061

Element Minimum Maximum

Si 0.40 0.80

Fe - 0.70

Cu 0.15 0.40

Mn - 0.15

Mg 0.8 1.20

Cr 0.04 0.35

Zn - 0.25

Ti - 0.15

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

5
SP-B QUALITY STANDARD & CERTIFICATIONS

ANODIZING

A wide range of anodizing treatment options are possible for the aluminium profile sections of this
system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro
colors (Red, Blue, Green, and Gray).

This surface treatment process involves first pre-treatment with scotch brite brushing for the
unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic
electrolyte solution through which electric current is passed creating an anodic film on the profiles
ranging from 5-30MICs.

The process is guaranteed and certified for use by QUALANOD - A quality label Organization to
guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.

6
QUALITY STANDARD & CERTIFICATIONS SP-B

Authorization to use the quality sign

7
SP-B QUALITY STANDARD & CERTIFICATIONS

POWDER COATING

• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT
Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8
ISO 2360/2813/2409/2931
Minimum Film Thickness - 60 Microns

A wide choice of colors for powder coating can be used for the aluminium profile sections.

From Gulf Extrusions the following powder types are available

• Polyester Façade (PE-F)

• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent
to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)
• Anti Bacterial (recommended to be used in Hospitals)
• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant
in nature.

This surface treatment process involves the following pre-treatment

1. Degreasing
2. Washing
3. Etching
4. Washing
5. Chromatising
6. Double washing in dematerialized water

Once completed, powder is applied using an electrostatic spraying process with charged powder
particles, followed by curing in an oven under a controlled temperature of 180-200C for paint
polymerization where the paint layer is at least 60mic.

This whole process is certified for use from QUALICOAT - A quality label for coating on metal for
Architectural Applications.

GUARANTEE PERIOD:
10 years for PE-F Quality
25 years for PE-SDF

8
QUALITY STANDARD & CERTIFICATIONS SP-B

Authorization to use the quality sign

9
SP-C EQUAL ANGLES

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner Kg. / Profile Corner Kg. /

A mm B mm Th mm A mm B mm Th mm
Reference Radius m. Reference Radius m.
01060 8 8 2 -- 0.075 01035 38 38 1.15 -- 0.232
01059 13 13 2 -- 0.129 01030 38 38 3.3 -- 0.648
01047 15 15 1 -- 0.078 01020 38 38 3.5 -- 0.685
01017 15 15 1.3 -- 0.101 01046 40 40 1.3 -- 0.276
01012 15 15 1.5 -- 0.116 01015 40 40 2 -- 0.422
01045 17.5 17.5 1.5 -- 0.136 01051 40 40 2.2 -- 0.462
01050 20 20 1 -- 0.105 01043 40 40 2.5 -- 0.523
01018 20 20 1.2 -- 0.126 01034 40 40 2.8 -- 0.584
01028 20 20 1.3 -- 0.136 01004 40 40 3 -- 0.623
01013 20 20 1.4 -- 0.150 01026 40 40 3.5 -- 0.723
01001 20 20 1.5 -- 0.168 01021 40 40 3.7 -- 0.762
01042 20 20 2 -- 0.205 01009 40 40 4 -- 0.820
01048 25 25 1 -- 0.132 01032 40 40 5.5 -- 1.106
01029 25 25 1.2 -- 0.158 01053 44.5 44.5 3 -- 0.697
01014 25 25 1.4 -- 0.184 01023 50 50 2 -- 0.529
01002 25 25 2 -- 0.259 01005 50 50 3 -- 0.785
01041* 25 25 3 3 0.376 01008 50 50 4 -- 1.036
01054 29 29 2 -- 0.302 01044 50 50 5 -- 1.283
01049 30 30 1 -- 0.159 01033 51 51 5.5 -- 1.433
01036 30 30 1.1 -- 0.175 01058 60 60 6 -- 1.846
01010 30 30 1.5 -- 0.240 01011 75 75 3 -- 1.195
01024 30 30 2 -- 0.313 01022 * 75 75 4.7 1 1.841
01007 30 30 2.5 -- 0.384 01027 76 76 4.8 -- 1.907
01019 30 30 2.8 -- 0.432 01052 90 90 3 -- 1.434
01031 30 30 3 -- 0.462
01025 30 30 4 -- 0.605
01003 30 30 5 -- 0.742
01037 35 35 3 -- 0.543

10
 UNEQUEL ANGELS SP-D

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner Kg. / Profile Corner Kg. /

A mm B mm Th mm A mm B mm Th mm
Reference Radius m. Reference Radius m.
02013 20 10 1.5 -- 0.115 02007 78.5 12.5 2 -- 0.479
02036 20 12 6/3.5 -- 0.381 02039 82 75 8 -- 3.218
02040 22 8 3 -- 0.219 02006 90 30 5 -- 1.553
02052 30 13 3 -- 0.324 02038 100 40 2 -- 0.745
02045 30 15 3 -- 0.340 02005* 100 50 6 8 2.365
02008 30 17 2 -- 0.243 02054 100 40 3 -- 1.109
02001 30 20 1.5 -- 0.196 02047 100 50 6 -- 2.331
02034 30 20 2 -- 0.259 02018 101.6 10 1.5 -- 0.446
02009 30 25 4 -- 0.551 02058 135 20 2 -- 0.826
02016 31 14.7 2 -- 0.236 02010 142 48.5 4 -- 2.014
02048* 38 12 1.5 0.75 0.195 02021 150 25 3 -- 1.393
02024 38 33 2.8 -- 0.516 02049 150 50 3 -- 1.596
02020 38 34 3.2 -- 0.594 02050 187 100 12/6 -- 7.484
02014 38 34 3.5 -- 0.647
02015 40 20 2 -- 0.313
02033 40 35 3 -- 0.583
02025 45 27 1.2 -- 0.229
02017 47 15 1.5 -- 0.245
02044 50 25 3 -- 0.583
02037 53 20 3 -- 0.567
02042 55 28 2 -- 0.437
02053* 57 45 3 1 0.802
02012 60 18 6 -- 1.166
02003 66.5 44.5 4 -- 1.156
02046 68 29 2 -- 0.512
02002 70 25 2 -- 0.502
02004 75 50 3 -- 0.988
02043 76.2 25.4 3 -- 0.799

11
SP-E CHANNELS

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile A B Th Th1 Corner Kg. / Profile A B Th Th1 Corner Kg. /

Reference mm mm mm mm Radius m. Reference mm mm mm mm Radius m.
03092 6.6 10 1.2 1.2 -- 0.077 03094 25 38 2 2 -- 0.524
03100 8.4 13 1.2 1.2 -- 0.103 03051 29 17 1.5 1.5 -- 0.243
03088 9 12 1.5 1.5 -- 0.121 03050 29 21 1.5 1.5 -- 0.275
03082 10.2 12.1 1.6 1.8 -- 0.146 03017* 29.5 52 2 2 2/4 0.688
03042 11.5 13 2.5 1.5 0.163 03057 30 12 1.5 1.5 -- 0.207
03067 12 9 1.2 1.2 -- 0.089 03072 30 15 2 2 -- 0.302
03112 12 23 2 2 -- 0.292 03084* 30 18.5 1.8 1.8 1.8 0.304
03029* 12.3 19 3 1.3 2 0.207 03027 30 30 2 2 -- 0.464
03005 13 19.1 1.8 1.8 -- 0.231 03047 30 50 10 5 -- 1.890
03054 14 15 1.5 1.5 -- 0.166 03009* 32 3.5 1.5 1.2 0.6 0.142
03091 15 10 1.2 1.2 -- 0.105 03049 33 21 1.5 1.5 -- 0.292
03105 15 35 2.25 2.25 -- 0.489 03053 34 15 1.5 1.5 -- 0.247
03060 16.5 19.5 1.2 1.2 -- 0.171 03030 34 20 1.5 1.5 -- 0.288
03052 17 17 1.5 1.5 -- 0.194 03099 34 75 4 4 -- 1.900
03031* 17.5 35 4 3.25 1 0.732 03065 36 12 2 2 -- 0.302
03071 18 40 4 4 -- 0.972 03013 38 25 3 3 -- 0.665
03063 18.8 12.5 1 1 -- 0.113 03033 38.3 10.1 2.25 2.25 -- 0.328
03062 19 12.5 2 2 -- 0.216 03081 40 20 1.1 1.1 -- 0.231
03061 20 12 2 2 -- 0.216 03039 40 20 1.2 1.2 -- 0.251
03080 20 20 1.3 1.3 -- 0.201 03019 40 20 1.55 1.55 -- 0.322
03001 20 20 2 2 -- 0.302 03002 40 20 1.8 1.8 -- 0.371
03007* 20 30.5 3 3.5 1 0.674 03043 40 20 2.2 2.2 -- 0.449
03059 21 9.25 1.15 1.15 -- 0.116 03104 40 30 6 7.5 -- 1.619
03038 23 15 1.2 1.2 -- 0.164 03018 40 40 2.5 2.5 -- 0.776
03041 23 21.5 1.5 1.5 -- 0.255 03103 40 55 6 7.5 -- 2.632
03040 24.8 15 1.4 1.4 -- 0.197 03089* 42.5 33 5 4.2 2 1.212
03064 25 12 1.3 1.3 -- 0.163 03076* 44 20 1.5 1.5 1/1.5 0.327
03075* 44 20 2 2 1 0.431

12
 CHANNELS SP-E

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile A B Th Th1 Corner Kg. / Profile A B Th Th1 Corner Kg. /

Reference mm mm mm mm Radius m. Reference mm mm mm mm Radius m.
03073 44 20 2 2 -- 0.432 03003 102 50 3 3 -- 1.588
03016 45 20 1.5 1.25 -- 0.308 03021 110 20 2 2 -- 0.789
03011 45 60 2 2 -- 0.870 03077 112 74 4 4 -- 2.722
03025* 46 10 2.5 2.5 1.5 0.409 03032 118 20 4 4 -- 1.620
03074* 48 90 12 12 1 6.606 03012 135 40 8 8 -- 4.300
03022 50 10.5 1.6 1.25 -- 0.276 03066 180 15 2 2 -- 1.112
03024 50 16.6 1.6 1.6 -- 0.346 03044* 200 76 12 12 2 10.631
03070 50 25 2 2 -- 0.518
03023 50 50 3 3 -- 1.167
03046 55 20 1.8 1.8 -- 0.444
03034* 55 35 5 5 3 1.528
03028 56 20 2.5 2.5 -- 0.614
03079 56 30 2.5 2.5 -- 0.749
03026 58 40 1.5 1.5 -- 0.547
03010* 59 38 3 3 3 1.045
03056 60 12 1.5 1.5 -- 0.328
03045 60 20 4 4 -- 0.994
03093 60 30 3 3 -- 0.923
03117* 65 75 7 7 2 3.784
03014 66 30 3 3 -- 0.975
03036 80 40 2 2 -- 0.842
03090* 81.5 21.4 1.55 2.1 1/2 0.561
03055 94 15 3 3 -- 0.956
03015* 94.25 40 2 2 2 0.923
03035 100 40 1.65 1.65 -- 0.787
03020 100 40 4 4 -- 1.858
03078 100 45 5 5 -- 2.430
03004 101.6 41.45 1.8 1.8 -- 0.880

13
SP-F T - SECTIONS

(*) denotes profile with corner radious / chamfer

Check before order confirmation.

Profile Corner
A mm B mm Th mm Th1 mm Kg. / m.
Reference Radius
04011 6 9.75 1.75 2 -- 0.072
04012 6 11.5 1.5 2 -- 0.078
04015 18 20 3.5 6 -- 0.437
04002 19 59 1.6 1.6 -- 0.333
04005 20 22 2 2 -- 0.216
04014 20 35 1.3 1.3 -- 0.188
04013 20 35 1.5 1.5 -- 0.217
04016* 20 38 2.5 2 1/2 0.327
04017 20 50 3 3 -- 0.542
04010 22 37 2 1.5 -- 0.261
04003 25 25.2 3 3 -- 0.382
04001* 27 27 1.8 1.8 0.9 0.254
04007 30 15 1.5 1.5 -- 0.176
04004 40 40 2.5 2.5 -- 0.523
04008* 50 50 4 4 3 1.047
04024 50 150 12 12 2/5 6.111
04006 52 40 1.8 1.8 -- 0.438
04018 80 45 5 5 -- 1.620
04009* 100 75 6 6 5 2.805

14
 RECTANLGULAR TUBES SP-G

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner Kg. / Profile Corner Kg. /

A mm B mm Th mm A mm B mm Th mm
Reference Radius m. Reference Radius m.
05070 20 10 1.2 -- 0.179 05166 60 30 3 -- 1.360
05153 20 10 1.5 -- 0.218 05044 60 40 1.6 -- 0.836
05108 20 15 1.2 -- 0.211 05002 60 40 2 -- 1.037
05177 24 15 1.5 -- 0.291 05099 61 20 5 -- 1.917
05168 25 10 1.8 -- 0.305 05139 64 25 1.7 -- 0.786
05146* 27.5 14 1.8 2 0.359 05138 64 38 1.7 -- 0.905
05203 30 20 3 -- 0.713 05096 69.5 33.5 2.5 -- 1.322
05207 40 10 2 -- 0.495 05079 69.5 62.5 2.5 -- 1.715
05035 40 20 1.1 -- 0.345 05118 70 25 1.1 -- 0.551
05016 40 20 1.4 -- 0.433 05019 70 25 1.4 -- 0.698
05008 40 20 1.8 -- 0.550 05003 70 46.5 3 -- 1.790
05144* 40 20 2 2 0.596 05061 75 20 1.7 -- 0.841
05112 40 20 2.5 -- 0.743 05060 75 50 1.6 -- 1.052
05100 40 26 3.2 -- 1.030 05127 76 37 1 -- 0.600
05111 46 20 2.5 -- 0.824 05092 80 15 1.1 -- 0.551
05064 50 15 1.5 -- 0.502 05098 80 20 1.1 -- 0.581
05157 50 20 3 -- 1.036 05076 80 20 1.35 -- 0.709
05117 50 25 1.1 -- 0.432 05040 80 20 1.6 -- 0.836
05017 50 25 1.4 -- 0.546 05013 80 25 2 -- 1.091
05199 50 25 2.5 -- 0.945 05142 80 40 1 -- 0.637
05145* 50 30 1.8 1.8 0.735 05121 80 40 1.1 -- 0.700
05189 50.8 25.4 3.25 -- 1.223 05091 80 40 1.2 -- 0.762
05125 54 25 1.5 -- 0.616 05041 80 40 1.25 -- 0.793
05137 55 35 1.7 -- 0.795 05124 80 40 1.3 -- 0.824
05105 55 45.5 3 -- 1.530 05014 80 40 1.4 -- 0.886
05007 60 20 1.5 -- 0.624 05054 80 40 1.5 -- 0.948
05194* 60 25 2 2 0.866 05059 80 40 2 -- 1.253
05018 60 30 1.4 -- 0.660 05190 80 40 3 -- 1.847

15
SP-G RECTANGULAR TUBES

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner Kg. / Profile Corner Kg. /

A mm B mm Th mm A mm B mm Th mm
Reference Radius m. Reference Radius m.
05101 80 40 3.2 -- 1.963 05058 100 50 2.5 -- 1.958
05057 80 50 1.6 -- 1.096 05201 100 50 3 -- 2.332
05005 80 50 2 -- 1.361 05033* 100 50 3.45 0.75 2.666
05211 85 50 2.7 -- 1.882 05026* 100 60 4 1.25 3.283
05130 90 40 2 -- 1.361 05042 100 70 1.65 -- 1.485
05148* 90 53 4 2 2.907 05109 100 80 3 -- 2.818
05173 93.2 59 2 -- 1.600 05103* 100 90 3 3/1.5 2.965
05106 94 55 3 -- 2.315 05131* 109 53 4 1.5 3.321
05140 95 25 1.7 -- 1.070 05187 110 44 1.8 -- 1.461
05104 95.4 55 3 -- 2.338 05078 110 65 3 -- 2.738
05086* 98 61 4 1 3.259 05167 115 90 4 -- 4.254
05120 100 15 1.15 -- 0.700 05045 115 100 3.5 -- 3.931
05090 100 15 1.2 -- 0.730 05185 120 20 1.5 -- 1.110
05075 100 15 1.35 -- 0.819 05165 120 20 3 -- 2.170
05089 100 20 1.2 -- 0.762 05043 120 40 1.7 -- 1.438
05084 100 20 1.3 -- 0.824 05082 120 40 2 -- 1.685
05037 100 20 1.445 -- 0.914 05056 120 50 3 -- 2.657
05009 100 20 2 -- 1.264 05205 120 60 3 -- 2.819
05050 100 30 2.5 -- 1.688 05212* 120 60 3 2 2.811
05038 100 40 1.33 -- 0.991 05220 120 80 8 -- 7.949
05029 100 40 1.5 -- 1.110 05162 125 85 2 -- 2.224
05004 100 40 2 -- 1.469 05046 140 40 2 -- 1.901
05135 100 40 3 -- 2.170 05011 140 50 2 -- 2.010
05006 100 45 1.8 -- 1.374 05115* 142.1 64.3 3 4/1 3.212
05001* 100 45 2.5 1 1.900 05178 146.5 54.5 4 -- 4.169
05025* 100 45 3.5 1 2.609 05067 150 20 2 -- 1.793
05074 100 50 1.6 -- 1.270 05088 150 37.5 2 -- 1.981
05151 100 50 2 -- 1.577 05206 150 50 2 -- 2.117

16
RECTANGULAR TUBES SP-G

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner
A mm B mm Th mm Kg. / m.
Reference Radius
05192 150 50 3 -- 3.143
05071 150 60 6/8 -- 6.933
05087 150 75 3 -- 3.548
05080 150 75 5 -- 5.804
05150 150 100 2.4 -- 3.177
05077 150 100 3 -- 3.953
05184 150.6 67.3 3 -- 3.433
05128* 156.5 52.5 6 1.5 6.378
05095* 183.5 53.5 4.5 1 5.551
05191 195 40 3 -- 3.710
05154 200 50 3 -- 3.952
05155* 200 50 6 6/2 7.637
05110 200 80 3 -- 4.438
05158 200 100 3 -- 4.763
05186 200 100 6.5 -- 10.074
05172 200 150 3 -- 5.572
05156 233 50 3 -- 4.487
05149 250 75 3 -- 5.167
05180 250 100 6 -- 10.951
05171* 250 150 3 1 6.380
05195 300 100 3 -- 6.383
05161* 300 200 4 1 10.627
05179 380 100 6 -- 15.163

17
SP-H SQUARE TUBES

(*) denotes profile with corner radius / ‘V’ groove

Check before order confirmation.

Profile Corner Kg. / Profile Corner Kg. /

A mm B mm Th mm A mm B mm Th mm
Reference Radius m. Reference Radius m.
05147* 14 14 1.7 1.5 0.221 05073 50 50 1.35 -- 0.709
05051 19.5 19.5 1.7 -- 0.327 05188 50 50 2 -- 1.037
05113 20 20 1.25 -- 0.253 05081 50 50 2.2 -- 1.136
05047* 24 24 1.2 1 0.293 05031 50 50 3 -- 1.523
05028* 25 25 1.2 1 0.307 05204 54 54 2.5 -- 1.390
05063 25 25 1.5 -- 0.381 05163 57 57 6 -- 3.305
05027* 25 25 1.7 1 0.426 05102 60 60 3 -- 1.847
05208 25 25 2 -- 0.497 05032 60 60 4 -- 2.419
05055 30 30 1.5 -- 0.462 05062 75 75 1.7 -- 1.346
05085 30 30 2 -- 0.605 05222 75 75 3.2 -- 2.481
05159 30 30 3 -- 0.874 05048 76 76 6 -- 4.535
05068* 30 30 5 1 1.352 05072 80 80 1.6 -- 1.355
05143 35 35 1.1 -- 0.403 05030 80 80 2 -- 1.685
05052 35 35 1.3 -- 0.473 05209* 80 80 2.5 2 2.085
05049 35 35 1.4 -- 0.508 05116 80 80 3 -- 2.495
05136 35 35 1.7 -- 0.611 05210* 80 80 4 2 3.276
05123 40 40 0.9 -- 0.380 05069 100 100 2 -- 2.117
05141 40 40 1 -- 0.421 05094 100 100 3 -- 3.143
05122 40 40 1.1 -- 0.462 05129 100 100 5 -- 5.130
05039 40 40 1.16 -- 0.486 05107* 102.5 102.5 12.5 1 12.150
05034 40 40 1.2 -- 0.503 05200 150 150 3 -- 4.763
05015 40 40 1.3 -- 0.543 05152* 150 150 6 2/1 9.338
05020 40 40 1.4 -- 0.584 05198 180 180 3 -- 5.735
05012 40 40 1.8 -- 0.743 05224 200 200 4 -- 8.467
05097 40 40 3 -- 1.199
05010 44.5 44.5 2.5 -- 1.134
05065 45 45 2 -- 0.929
05119 45 45 3 -- 1.361

18
 ROUND TUBES SP-I

Profile Profile
A mm B mm Th mm Kg. / m. A mm B mm Th mm Kg. / m.
Reference Reference
06103 8 5.8 1.1 0.064 06023 40 36.4 1.8 0.583
06083 9.6 6.2 1.7 0.114 06007 40 34 3 0.950
06106 10 7.4 1.3 0.096 06004 40 20 10 2.600
06045 12 10 1 0.093 06013 45 40.5 2.25 0.816
06017 12 9 1.5 0.134 06005 48 40 4 1.492
06075 13.5 10 1.75 0.174 06101 48.5 42.5 3 1.158
06008 17 14 1.5 0.200 06102 48.5 32.9 7.8 2.693
06019 18.5 15.5 1.5 0.216 06072 48.6 40 4.3 1.616
06053 19 16.4 1.3 0.195 06010 50 46 2 0.817
06054 22 19.4 1.3 0.228 06011 50 45 2.5 1.011
06001 22 19 1.5 0.265 06016 50 44 3 1.196
06055 25 22.4 1.3 0.261 06014 51 45.5 2.75 1.126
06034 25 21 2 0.390 06036 51 38.1 6.45 2.437
06021 25 17 4 0.713 06080 51.4 45.4 3 1.231
06078 27 13 7 1.187 06020 53.5 49.5 2 0.874
06056 28 25.4 1.3 0.294 06060 60 56 2 0.984
06082 28.4 24.4 2 0.447 06006 60 54 3 1.460
06110 30 27.2 1.4 0.340 06037 60 52.3 3.85 1.834
06025 30 26.4 1.8 0.431 06079 60 52 4 1.900
06059 30 25 2.5 0.583 06002 60 36 12 4.900
06088 31.5 7.5 12 1.985 06046 60.32 49.24 5.54 2.574
06068 33 28 2.5 0.647 06061 63 58 2.5 1.283
06039 33 27 3 0.763 06062 70 65 2.5 1.431
06012 33.5 25.5 4 1.001 06026 73.1 60.4 6.35 3.595
06024 35 31.4 1.8 0.507 06029 75 69 3 1.832
06081 35 29 3 0.814 06069 75 65 5 2.969
06117 38 34 2 0.611 06015 76 64 6 3.563
06035 38.1 31.5 3.3 0.974 06018 77.3 73.3 2 1.287

19
SP-I ROUND TUBES

Profile Profile
A mm B mm Th mm Kg. / m. A mm B mm Th mm Kg. / m.
Reference Reference
06066 80 74 3 1.959 06033 158.75 139.7 9.525 12.056
06115 80 70 5 3.181 06028 168 160 4 5.564
06003 80 64 8 4.900 06085 168.27 154.05 7.11 9.722
06042 85.7 73 6.35 4.274 06044 200 192 4 6.650
06047 86 73 6.5 4.383 06086 219.08 202.72 8.18 14.631
06105 90 86.4 1.8 1.346
06120 92.7 80 6.35 4.651
06032 96 90 3 2.367
06063 98 93 2.5 2.025
06027 100 94 3 2.468
06022 100 90 5 4.029
06093 100 64 18 12.520
06031 101 51 25 16.116
06065 101.6 88 6.8 5.468
06057 102 98.4 1.8 1.530
06064 105 100 2.5 2.174
06070 110 100 5 4.453
06049 111.76 107.44 2.16 2.008
06094 115 110 2.5 2.385
06048 119.4 105 7.2 6.852
06030 120.65 107.95 6.35 6.157
06038 121.4 107.25 7.075 6.861
06052 127 116.84 5.08 5.254
06043 130 120 5 5.301
06050 136.65 127 4.825 5.395
06040 140 116 12 13.029
06051 144.3 136.7 3.8 4.529
06041 145 120 12.5 14.049

20
 FLAT BARS SP-J

(*) denotes profile with corner radious / chamfer

Check before order confirmation.

Profile (R)Corner Profile (R)Corner

A mm Th mm Kg. / m. A mm Th mm Kg. / m.
Reference Radius Reference Radius
07044 10 2 -- 0.054 07013 47.5 2 -- 0.257
10295 15.8 12.7 -- 0.542 07059 50 1.5 -- 0.202
07010 16 3 -- 0.130 07016* 50 3 1.5 0.400
07045 20 2 -- 0.108 07001 50 4 -- 0.540
07020 20 3 -- 0.162 07026 50 6 -- 0.810
07007 20 5 -- 0.271 07027 50 10 -- 1.350
07014* 20 5 1 0.268 07083 50 16 -- 2.16
07023 20 8 -- 0.432 07054 54 8 -- 1.166
07061 20 10 -- 0.539 07049 57 12 -- 1.846
07084 25 1.3 -- 0.087 07050 57 17 -- 2.616
07034 27 4 -- 0.292 07003 59.8 8 -- 1.296
07036 30 3 -- 0.243 07030 60 3 -- 0.486
07015* 30 5 1 0.403 07031 60 5 -- 0.810
11300 30 20 -- 1.620 07009 60 6 -- 0.972
07053 31 12 -- 1.004 07021 75 4 -- 0.810
07012 32 2 -- 0.173 07082 75 20 -- 4.05
07005 32 5 -- 0.432 07056* 75.5 8 2 1.622
07051 34 5 -- 0.458 07025 80 8 -- 1.728
07048 34 12 -- 1.101 07052 80 10 -- 2.159
07029 40 2 -- 0.216 07046* 82 2 1 0.441
07019 40 3 -- 0.324 07047* 91 3 1.5 0.734
07002 40 4 -- 0.435 07071 100 3 -- 0.810
07008 40 6 -- 0.648 07070 100 6 -- 1.620
07035 40 8 -- 0.864 07039 100 8 -- 2.159
07032 40 12 -- 1.296 07004* 100 12 2 3.218
07011 40 20 -- 2.160 07033 100 20 -- 5.400
07057 45 3 -- 0.364 07069 110 5 -- 1.485
07058* 45.5 8 2 0.973 07060 110 10 -- 2.969

21
SP-J FLAT BARS

(*) denotes profile with corner radious / chamfer

Check before order confirmation.

Profile (R)Corner
A mm Th mm Kg. / m.
Reference Radius
07062 115 6 -- 1.862
07073 120 10 -- 3.240
07041 130 8 -- 2.807
22750* 135 20 1 7.288
22101 140 15 -- 5.669
07017* 150 6 1 2.428
07018* 150 8 1 3.238
07028* 150 11 1 4.453
07006* 150 12.7 3 5.144
07055* 150 13 1 5.263
07072 170 6 -- 2.753
23311* 170 20 1 9.177
22751* 180 30 1 14.578
07038 200 5 -- 2.700
07040 200 6 -- 3.240
07037* 200 9 1 4.860
07022* 200 15 1 8.098
07024* 200 20 2 10.791
07081* 250 7 1 4.722
07042 300 20 -- 16.200
07043 300 30 -- 24.299

22
 I - SECTIONS SP-K

(*) denotes profile with corner radious / chamfer

Check before order confirmation.

Profile Corner
A mm B mm Th mm Th1 mm Kg. / m.
Reference Radius
08006 16 63.5 1.8 1.8 -- 0.446
08004 18 15.7 3 3 -- 0.370
08005* 19 41.25 6.3 3 -- 0.899
08015* 20 34 2 2.5 3 0.420
08007 30 35 2.5 2.5 1 0.607
08003 30 55 2.5 2.5 -- 0.743
08009 48 50 2 2 -- 0.767
08010 60 56 2.5 2.5 -- 1.154
08011* 70.2 30 3 4 3 1.406
08008* 85 180 9 8 5 7.683
08002 100 68 8 10 -- 5.724
08012* 152.4 152.4 6.83 6.1 6.35 8.000
08013* 133.35 203.2 7.82 5.84 8.1 8.744
08020* 200 200 16 12 2 22.714

23
SP-L RODS - SQUARE & ROUND

(*) denotes profile with corner radious / chamfer

Check before order confirmation.

Profile (R)Corner Profile

A mm Kg. / m. O A mm Kg. / m.
Reference Radius Reference
10707 9.8 -- 0.259 21119 6.5 0.090
22603 12 -- 0.388 11012 8 0.136
09692 15 -- 0.608 21912 10 0.233
11613 20 -- 1.080 21703 12 0.305
10018* 20 2 1.071 11297 20 0.848
11552* 25 0.75 1.689 21045 30 1.909
09336* 28.2 3 2.150 24761 45 4.294
10111* 45 2 5.458 21509 50 5.301
22424 50.8 -- 6.967 24114 60 7.634
09442 70 6 13.168 24115 80 13.572
24112 90 17.177
21507 105 23.379
24113 110 25.659

24
 All rights reserved.
No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830
Email: [email protected] • Visit us at www.gulfex.com