Scribd
Upload
430 views

Script de Configuracion - Cisco Packet Tracer

The document provides configuration scripts for routers and switches to set up initial configurations including: 1. Configuring logins, passwords, and banners on routers and switches. 2. Creating VLANs 10, 20, and 30 on the switches and assigning ports accordingly, including trunk links between switches. 3. Configuring spanning tree protocol and designating Switch 1 as the root switch. 4. Configuring subinterfaces on the router for each VLAN and assigning IP addresses. 5. Creating access control lists 101 and 102 to filter traffic between VLAN subnets.

Uploaded by

Magdiel525
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
430 views

Script de Configuracion - Cisco Packet Tracer

The document provides configuration scripts for routers and switches to set up initial configurations including: 1. Configuring logins, passwords, and banners on routers and switches. 2. Creating VLANs 10, 20, and 30 on the switches and assigning ports accordingly, including trunk links between switches. 3. Configuring spanning tree protocol and designating Switch 1 as the root switch. 4. Configuring subinterfaces on the router for each VLAN and assigning IP addresses. 5. Creating access control lists 101 and 102 to filter traffic between VLAN subnets.

Uploaded by

Magdiel525
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Script de Configuración

Configuración inicial del router y Switches


Router

Router>enable
Router#conf t
Router(config)#banner motd #
Enter TEXT message. End with the character '#'.
ACCESO RESTRINGIDO ---- SOLO PERSONAL AUTORIZADO#
Router(config)#service password-encryption
Router(config)#enable secret cisco
Router(config)#line vty 0 4
Router(config-line)#password cisco
Router(config-line)#login
Router(config-line)#exit
Router(config)#line console 0
Router(config-line)#password cisco
Router(config-line)#login
Router(config-line)#exit
Router(config)#^Z
Router#
Router#copy running-config startup-config
Router#

Switch1

Switch>enable
Switch#conf t
Switch(config)#hostname Switch1
Switch1(config)#banner motd #
Enter TEXT message. End with the character '#'.
ACCESO RESTRINGIDO ---- SOLO PERSONAL AUTORIZADO#
Switch1(config)#service password-encryption
Switch1(config)#enable secret cisco
Switch1(config)#line vty 0 4
Switch1(config-line)#password cisco
Switch1(config-line)#login
Switch1(config-line)#exit
Switch1(config)#line console 0
Switch1(config-line)#password cisco
Switch1(config-line)#login
Switch1(config-line)#exit
Switch1(config)#^Z
Switch1#
Switch1#copy running-config startup-config
Switch1#

Switch2
Script de Configuración
Switch>enable
Switch#conf t
Switch(config)#hostname Switch1
Switch2(config)#banner motd #
Enter TEXT message. End with the character '#'.
ACCESO RESTRINGIDO ---- SOLO PERSONAL AUTORIZADO#
Switch2(config)#service password-encryption
Switch2(config)#enable secret cisco
Switch2(config)#line vty 0 4
Switch2(config-line)#password cisco
Switch2(config-line)#login
Switch2(config-line)#exit
Switch2(config)#line console 0
Switch2(config-line)#password cisco
Switch2(config-line)#login
Switch2(config-line)#exit
Switch2(config)#^Z
Switch2#
Switch2#copy running-config startup-config
Switch2#

Switch3

Switch>enable
Switch#conf t
Switch(config)#hostname Switch1
Switch3(config)#banner motd #
Enter TEXT message. End with the character '#'.
ACCESO RESTRINGIDO ---- SOLO PERSONAL AUTORIZADO#
Switch3(config)#service password-encryption
Switch3(config)#enable secret cisco
Switch3(config)#line vty 0 4
Switch3(config-line)#password cisco
Switch3(config-line)#login
Switch3(config-line)#exit
Switch3(config)#line console 0
Switch3(config-line)#password cisco
Switch3(config-line)#login
Switch3(config-line)#exit
Switch3(config)#^Z
Switch3#
Switch3#copy running-config startup-config
Switch3#

Creación de las Vlans en los 3 Switch:


Switch>enable
Switch#configure terminal
Script de Configuración
Switch(config)#vlan 10
Switch(config-vlan)#name Docentes
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name Estudiantes
Switch(config-vlan)#exit
Switch(config)#vlan 30
Switch(config-vlan)#name Administrativo
Switch(config-vlan)#exit

Asignación de puertos a las Vlans correspondientes y asignación de enlaces


troncales (Trunk):
Switch 1:
Switch1#configure terminal
Switch1(config)#interface FastEthernet 0/1
Switch1(config-if)#switchport access vlan 20
Switch1(config-if)#exit
Switch1#configure terminal
Switch1(config)#interface range fastEthernet 0/2 - 6
Switch1(config-if)#switchport mode trunk
Switch1(config-if)#exit

Switch 2:
Switch2#configure terminal
Switch2(config)#interface FastEthernet 0/1
Switch2(config-if)#switchport access vlan 20
Switch2(config-if)#exit
Switch2(config)#interface FastEthernet 0/6
Switch2(config-if)#switchport access vlan 10
Switch2(config-if)#exit
Switch2(config)#interface FastEthernet 0/7
Switch2(config-if)#switchport access vlan 30
Switch2(config-if)#exit
Switch2#configure terminal
Switch2(config)#interface range fastEthernet 0/2 - 5
Switch2(config-if)#switchport mode trunk
Switch2(config-if)#exit

Switch 3:
Switch3#configure terminal
Switch3(config)#interface FastEthernet 0/1
Switch3(config-if)#switchport access vlan 20
Switch3(config-if)#exit
Script de Configuración
Switch3(config)#interface FastEthernet 0/6
Switch3(config-if)#switchport access vlan 10
Switch3(config-if)#exit
Switch3(config)#interface FastEthernet 0/7
Switch3(config-if)#switchport access vlan 30
Switch3(config-if)#exit
Switch3#configure terminal
Switch3(config)#interface range fastEthernet 0/2 - 5
Switch3(config-if)#switchport mode trunk
Switch3(config-if)#exit

Configurando Spanning Tree, y asignando al switch 1 como Switch Raiz

Switch 1:
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 1 priority 0
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 10 priority 0
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 20 priority 0
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 30 priority 0
Switch1(config)#exit

Switch 2:
Switch2#configure terminal
Switch2(config)#spanning-tree vlan 1 priority 4096
Switch2#configure terminal
Switch2(config)#spanning-tree vlan 10 priority 4096
Switch2#configure terminal
Switch2(config)#spanning-tree vlan 20 priority 4096
Switch2#configure terminal
Switch2(config)#spanning-tree vlan 30 priority 4096
Switch2(config)#exit

Switch 3:

Switch1#configure terminal
Switch1(config)#spanning-tree vlan 1 priority 8192
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 10 priority 8192
Switch1#configure terminal
Script de Configuración
Switch1(config)#spanning-tree vlan 20 priority 8192
Switch1#configure terminal
Switch1(config)#spanning-tree vlan 30 priority 8192
Switch1(config)#exit

Configurando las interfaces virtuales


Router>enable
Router#conf t
Router(config)#interface fastEthernet 0/0.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip address 192.168.100.17 255.255.255.248
Router(config-subif)#exit
Router(config)#interface fastEthernet 0/0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/0.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip address 192.168.100.1 255.255.255.240
Router(config-subif)#exit
Router(config)#interface fastEthernet 0/0.30
Router(config-subif)#encapsulation dot1Q 30
Router(config-subif)#ip address 192.168.100.25 255.255.255.248
Router(config-subif)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.100.33 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#^Z
Router#copy running-config startup-config
Router#

Creando las Access List


Lista de Acceso 101

Router#enable
Router#conf t
Router(config)#access-list 101 deny ip 192.168.100.16 0.0.0.7 192.168.100.24 0.0.0.7
Router(config)#access-list 101 deny ip 192.168.100.16 0.0.0.7 192.168.100.0 0.0.0.15
Router(config)#access-list 101 permit ip any any
Script de Configuración
Router(config)#interface fastEthernet 0/0.10
Router(config-subif)#ip access-group 101 in
Router(config-subif)#^Z
Router#copy running-config startup-config
Router#

Lista de Acceso 102

Router>enable
Router#conf t
Router(config)#access-list 102 deny ip 192.168.100.24 0.0.0.7 192.168.100.0 0.0.0.15
Router(config)#access-list 102 deny ip 192.168.100.24 0.0.0.7 192.168.100.16 0.0.0.7
Router(config)#access-list 102 permit ip any any
Router(config)#interface fastEthernet 0/0.30
Router(config-subif)#ip access-group 102 in
Router(config-subif)#exit
Router(config)#^Z
Router#copy running-config startup-config
Router#

You might also like