Scribd
Upload
47 views

Manually Installing Docking Station Driver

The document provides instructions for manually installing drivers for a USB docking station and a specific Java library. It describes checking for existing drivers in the Device Manager, updating drivers by browsing to the correct location, and downloading and installing the necessary Java library from the manufacturer's website. If the standard driver installation fails, alternate driver installation instructions from another website are provided.

Uploaded by

miafeu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Manually Installing Docking Station Driver

The document provides instructions for manually installing drivers for a USB docking station and a specific Java library. It describes checking for existing drivers in the Device Manager, updating drivers by browsing to the correct location, and downloading and installing the necessary Java library from the manufacturer's website. If the standard driver installation fails, alternate driver installation instructions from another website are provided.

Uploaded by

miafeu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Manually

 Installing  Docking  Station  Driver  

Go  to  “Device  Manager”  to  see  if  the  driver  is  installed  for  the  USB  docking  station.  

In  Windows  XP,  right  click  on  “My  Computer”  and  select  “Properties.”    Click  on  the  “Hardware”  tab  and  
select  “Device  Manager.”  

In  Windows  7,  click  on  the  start  button  >  Select  “Control  Panel”  and  click  on  “View  by  Large  Icons”  and  
select  “Device  Manger.”  

If  the  driver  is  not  installed  correctly  then  the  device  will  show  up  as  a  yellow  exclamation  point.  

To  update  the  driver,  right  click  on  “USB  Device”  and  choose  “Update  Driver”  

The  “Hardware  Update  Wizard”  will  appear.    Choose  “Install  from  a  list  or  specific  location  (Advanced)”  

     

1  
 
Click  on  “Next”  and  then  select  “Search  for  the  best  driver  in  these  locations.”    Browse  to  the  location  
C:\SpecWare.  
 

When  the  install  is  complete,  click  on  finish.    If  the  driver  does  not  install,  proceed  to  the  Alternate  
Driver  Install  Instructions  (Page  3.)          

After  installing  the  driver  for  the  docking  station,  you  will  need  to  download  and  install  a  specific  Java  
Library  from  the  Spectrum  Website.  

2  
 
Manually  Installing  the  Java  Library  

Go  to  www.specmeters.com  

Go  to  “Support”  

Click  on  “Software  Updates”  on  the  left.  

Click  on  “Spec9  Pro  and  Basic  Updates”  

At  the  bottom  of  the  page  under  Other  Files  download  “Java  Library  0133”  by  clicking  on  the  link  and  
choosing  “Save  As”  

Save  the  file  to  your  desktop.  

Double  click  on  the  file  and  select  “Run”  

Note:    This  is  a  specific  java  library  that  needs  to  be  downloaded  from  our  website.    It  will  not  be  
installed  if  you  run  a  general  Java  update  from  the  Java  website.  

After  installed  the  Java  update  you  should  be  able  to  launch  the  B-­‐series  logger.  

Alternate  Driver  Install  instructions  

Go  to  www.ibutton.com    

Click  on  “Software  Resources”  

Click  on  “1-­‐Wire  Drivers”  

Click  on  “Click  to  Go  to  Download  Page”  

On  the  download  page  choose  your  operation  system  and  select  the  file  type.  

3  
 
Click  on  download  and  save  the  file  to  your  computer.  

Run  the  file  to  install  the  driver  on  your  system.      

Make  sure  that  the  docking  station  is  disconnected  from  your  computer  while  running  the  install.  

After  you  finish  the  install  for  the  driver,  you  will  need  to  manually  install  the  Java  library  (Page  3.)  

4  
 

You might also like