Scribd
Upload
861 views

Mindset 2unit 3 - Model Text

The document describes the 8 step process for building a tepee tent. It begins with tying 3 long sticks together to form a tripod frame. More sticks are then added to strengthen the frame and rope is wrapped around to hold it together. Next, a canvas is wrapped around a separate stick and lifted to unroll around the frame. The canvas is secured with metal pins and the bottom is attached to the ground, completing the tepee structure.

Uploaded by

Diễm Ngọc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
861 views

Mindset 2unit 3 - Model Text

The document describes the 8 step process for building a tepee tent. It begins with tying 3 long sticks together to form a tripod frame. More sticks are then added to strengthen the frame and rope is wrapped around to hold it together. Next, a canvas is wrapped around a separate stick and lifted to unroll around the frame. The canvas is secured with metal pins and the bottom is attached to the ground, completing the tepee structure.

Uploaded by

Diễm Ngọc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mindset for IELTS Level 2 Skills Modules

Unit 3: Writing Exercise 10


WRITING TASK 1

You should spend about 20 minutes on this task.

The diagram shows how a type of tent called a tepee is built.

Summarise the information by selecting and reporting the main features and
make comparisons where relevant.

Write at least 150 words.


This model answer has been prepared by an examiner as a very good answer.
However, please note that this is just one answer out of many possible
approaches.

The diagram shows the eight stages needed to build a tepee. The process
begins by tying together three long sticks and ends by attaching the canvas to
the ground to form the tepee.

Firstly, you need three long sticks of the same length which are tied together
by rope. The rope is then pulled to form a frame with three legs, which is called
a tripod. Next, more sticks are added to the tripod to make the frame strong
and the rope is wrapped around the whole structure to keep it all together.
After this has been done, a canvas is wrapped around a separate stick. This is
lifted against the structure and the canvas is unrolled around the tepee. To
keep the canvas in place, the ends are then pinned together using metal pins.
Finally, the bottom of the canvas is fixed to the ground. The tepee is complete.

(150 Words)

You might also like