PC1H Pressure Comp

Unidirectional Metered Flow with Check Valve ~ 1/4" to 1"

Carbon Steel body for working pressures to 3,000 PSI

DMIC's PC1H continues to maintain flow regulated within + 5%

of the user setting upon inlet and outlet pressure fluctuation.
• DMIC’s ChromaFlow color-coded design facilitates initial calibration,
system documentation, and restoration of correct settings if required
• Designed for 3,000 PSI maximum operating pressure, can operate at
higher working pressure with loss of regulation precision (call DMIC)
• Integral 5 PSI poppet check valve provides free return flow
• Set Screw standard to prevent tampering
• For OEM production quantities, optional “fine” needle profile available
• Quality construction, premium ergonomics, and superb aesthetics
show your system is built to a “quality standard”; not a “price” standard

Performance Data
Metered Direction Reverse Flow Dimensions (inches)
Nominal Port Flow Range Characteristics
PC1H Size Thread Minimum Maximum Maximum ΔP at
Flow Flow Reverse Maximum A B C D E Lbs.
GPM GPM Flow GPM Reverse kg
(l/m) (l/m) (l/m) Flow
PC1H-0250N ¼" NPT 0.3 GPM 3 GPM 5 GPM 40 PSI
¼" 1 l/m 11 l/m 19 l/m 3 Bar
2.73 1.38 2.97 3.63 0.81 1.0
PC1H-0250B ¼" BSPP
PC1H-0375N 3
/8" NPT 0.6 GPM 6 GPM 8 GPM 40 PSI
2 l/m 23 l/m 30 l/m 3 Bar
3.15 1.50 3.47 4.16 1.00 1.5
PC1H-0375B /8" BSPP
3
3/8"
PC1H-0375S #6 SAE 0.3 GPM 3 GPM 5 GPM 40 PSI
1 l/m 11 l/m 19 l/m 3 Bar
2.73 1.38 2.97 3.63 0.81 1.0
PC1H-0375IU 16mm ISO6149
PC1H-0500N ½" NPT 1.5 GPM 15 GPM 20 GPM 110 PSI
4.04 1.75 4.06 4.94 1.19 2.6
6 l/m 57 l/m 76 l/m 7,6 Bar
PC1H-0500B ½" BSPP
½"
PC1H-0500S #8 SAE 0.6 GPM 6 GPM 8 GPM 40 PSI
2 l/m 23 l/m 30 l/m 3 Bar
3.15 1.50 3.47 4.16 1.00 1.5
PC1H-0500IU 18mm ISO6149
PC1H-0625S
5/8"
#10 SAE 1.5 GPM 15 GPM 20 GPM 110 PSI
4.04 1.75 4.06 4.94 1.19 2.6
PC1H-0625IU 22mm ISO6149 6 l/m 57 l/m 76 l/m 7,6 Bar

PC1H-0750N ¾" NPT

5.06 2.25 4.79 5.88 1.38 5.0
PC1H-0750B ¾" BSPP 2.5 GPM 25 GPM 35 GPM 120 PSI
¾" 10 l/m 95 l/m 133 l/m 8,3 Bar
PC1H-0750S #12 SAE
5.06 2.25 4.79 5.88 1.38 5.0
PC1H-0750IU 27mm ISO6149
PC1H-1000N 1" NPT
6.90 2.75 5.63 6.94 1.88* 10.0
PC1H-1000B 1" BSPP 5 GPM 50 GPM 60 GPM 140 PSI
1" 19 l/m 190 l/m 228 l/m 9,7 Bar
PC1H-1000S #16 SAE
6.90 2.75 5.63 6.94 1.88* 10.0
PC1H-1000IU 33mm ISO6149
NOTES: (1) Typical flows quoted in U.S. GPM, using 100 SUS Petroleum Based Fluid at 100°F
(2) This model incorporates a reverse flow check. For 2-way compensation select model PC2H, page 14 (*) Means HEX
(3) Manifold mount version available for OEM production quantity orders, call DMIC
(4) For production qty. orders, non-adjustable versions factory preset to Buyer’s flow setting are available
(5) PC1H and PC2H valves require a minimum pressure differential between the inlet and outlet ports for
correct operation. For sizes below ½”, 107.5 PSI (7 Bar) is requred; larger sizes require 159.5 PSI (11 Bar)

www.dmic.com DFC-1401A Call Toll Free 1-800-248-3642

DMIC Flow Control Catalog
Copyright ©2011 Delaware Mfg. Page 20 In Canada 1-800-320-3642
 PC1H Pressure Comp

PC1H Physical Parameters

VALVE BODY Carbon Steel
POPPET Stainless Steel
SEALING Buna-N Standard
WORKING PSI ( 1/8"-3/4" ) 3000 PSI (207 Bar)
SAFETY FACTOR Minimum 3:1
RETURN FLOW CHECK Present
CHECK VALVE SETTING 5 PSI (0,35 Bar)
TEMP RANGE -40˚F/250˚F (-40˚C/121˚C)

For complete ordering information and

option availability please see page 28.

PC 1H - 0500 N Inlet Port Thread

Standard US/Canada
Model N NPT
1H Steel, 1-Way Nominal Size
Pressure Comp Expressed in 1/1000" units S SAE ORB
Steel, 2-Way Example: 0375= 3/8", 1 1/2=1500 Metric Standard
2H Pressure Comp
B BSPP
Optional Threads
(Call DMIC)
B BSPP
T BSPT
IU ISO6149

NV2H 1000-1250
160
1000S
140
Pressure Drop (PSI)

1000
& 1250 1250S
120
100
80
60
40
20
NV2H 0500-1000 0
160
0500
0 20 40 60 80 100 120 140 160
0750
140
Pressure Drop (PSI)

Tested @ 100 SSU, S.G = 0.86

Flow (GPM) 7/26/2011
120
0625S
100
80
1000
60
40
20
0
0 5 10 15 20 25 30 35 40

Tested @ 100 SSU, S.G = 0.86

Flow (GPM) 7/25/2011

This valve series is factory sealed and disassembly will destroy the valve and void the warranty.
Due to our policy of continual product improvement, the specifications in this catalog
may change without notice. When designing by spec, please request a certified print.
www.dmic.com DFC-1401A Call Toll Free 1-800-248-3642
DMIC Flow Control Catalog
Copyright ©2011 Delaware Mfg. Page 21 In Canada 1-800-320-3642