Scribd
Upload
693 views2 pages

Circular Motion 0625 - w01 - QP - 3-2

The document describes the motion of a train around a sharp bend in a track. It asks questions about calculating the maximum speed allowed on the bend, the time taken to travel the bend, the length of the bend, and the deceleration of the train as it slows down for the bend. It also asks about identifying and explaining the centripetal force acting on the train as it moves around the curved track.

Uploaded by

Nicole Nicole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
693 views2 pages

Circular Motion 0625 - w01 - QP - 3-2

The document describes the motion of a train around a sharp bend in a track. It asks questions about calculating the maximum speed allowed on the bend, the time taken to travel the bend, the length of the bend, and the deceleration of the train as it slows down for the bend. It also asks about identifying and explaining the centripetal force acting on the train as it moves around the curved track.

Uploaded by

Nicole Nicole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2 For

Examiner’s
Use
1 Fig. 1.1 shows the motion of a train over a section of track which includes a sharp bend.

30

25

20
speed
––––– 15
m/s

10

0
0 10 20 30
time/s

Fig. 1.1

(a) The section of the track with the sharp bend has a maximum speed restriction. The train
decelerates approaching the bend so that at the start of the bend it has just reached the
maximum speed allowed. The train is driven around the bend at the maximum speed
allowed and accelerates immediately on leaving the bend.

(i) What is the maximum speed allowed round the bend in the track?

maximum speed = .....................................

(ii) How long does the train take to travel the bend of the track?

time taken = .....................................

(iii) Calculate the length of the bend.

length of bend = .....................................


[3]

(b) The train has to slow down to go round the bend. Calculate the deceleration.

deceleration = .....................................[2]

0625/3/O/N/01
3 For
Examiner’s
Use
(c) As the train is driven round the bend, there is an extra force acting, called the centripetal
force.

(i) On Fig. 1.2, draw an arrow to show the direction of this force.

train

curved
track

direction
of motion

Fig. 1.2

(ii) State the effect that this force has on the motion.

...................................................................................................................................

...................................................................................................................................

(iii) State how this force is provided.

...................................................................................................................................

...................................................................................................................................
[3]

0625/3/O/N/01 [Turn over

You might also like