RADIAFLEX

DESCRIPTION
• Metalwork : Mild steel, plated.
• Natural rubber, bonded, cylindrically shaped.
• Welded fixings: 5 styles (single sided threaded
stud, single sided
threaded hole, double threaded stud, double threaded holes,
combination fixing).
In Europe, we often use different screw standards than our french
standard.
To better satisfy this need, Paulstra has created a new range TRadiaflex
Europe.
This range is available with the 4 usual welded fixings and with a new
fixing : the threaded hole stop.

CHARACTERISTICS
The design of the RADIAFLEX mount gives the following basic
characteristics :
• Radial elasticity greater than axial elasticity.
• The rubber works in :
- compression (axial).
- shear (radial).
- compression/shear according to the fixing method.
Advantages :
• Simple to fix.
• Simple and economical.
• Extensive range :
- 11 stud diameters.
- Several heights for each diameter.
- 5 methods of fixing.
Recommendations :
• Operation in shear is very useful for vibration isolation provided that
the radial forces are not too great.

34
 DIMENSIONS AND COMPRESSIVE LOADS
SINGLE STUD FIXING DOUBLE STUDS FIXING
ØA ØA
BG ØC ØC

BG
New RADIAFLEX See Vibrachoc elastomer range :
references Threaded studs

Compression Compression Shear*

ØA B G ØA B G Max. Max.
ØC Deflection Ref. ØC Ref.
mm mm mm Max. load mm mm mm load Deflect
mm load Deflect
mm
daN mm daN daN
10 12 2 511110 10 8 M3 6 10 1.6 1.25 0.9 **
12.5 13.5 M5 10 11 2.5 511128 12 8 M3 6 12 1.2 1.5 0.75 **
15 10 3 511115
20 8 3.5 511125 10 12 2 1.5 1.5 521293
12.5 15 M5 10 10 3 2.5 2 521128
10 M4 10 20 2 511150 20 8 3.5 2.5 4 521295
15 3 511151 10 1.5 1.5 521650
M4 10 20 2.5
16 10 20 2 511292 15 3 2 521651
15 M5 12 20 3 511294
20 15 4 511296 16 10 20 1.5 2.5 1.5 521292
25 15 5 511298 15 M5 12 20 3 2.5 2 521294
20 15 4 2.5 4 521296
8.5 40 1.5 511200 25 15 5 2 5 521298
15 35 4 511215 8.5 40 0.6 5 1 521178
20 20 M6 16.5 30 5 511220 15 35 3 5 2.5 521249
25 30 5.5 511225 20 20 M6 16.5 30 4.5 5 3.5 521297
30 25 7 511230 25 30 5.5 4.5 4.5 521299
10 80 2 511158 30 25 7 4.5 4.5 521319
15 60 3.5 511155 10 80 1.5 8 1.5 521655
20 M6 18 50 5 511159 15 60 2.5 8 2.5 521656
20 M6 18 50 2 8 4 521652
30 50 8 511160
30 50 7.5 8 6 521653
10 80 2 511265
25.5 15 60 3.5 511270 25.5 10 80 1.5 8 1.5 521340
19 55 4.5 511251 15 60 2.5 8 2.5 521341
22 M8 20 50 4 8 4 521251
22 M8 20 50 5.5 511275 25 50 5.5 8 4.5 521342
25 50 6 511280 30 50 7.5 8 6 521343
30 50 8 511285 40 50 10 6.5 6 521344
40 50 10 511290
15 90 3 11 2.5 521308
15 90 3.5 511308
30 22 M8 25 80 5 11 4 521310
30 2230 M8 25 80
70
6
8
511310
511312
30
40
70
60
8
9
11
11
6
7.5
521312
521314
40 60 9 511314 30 150 6 20 5.5 521181
30 120 7 511157 40 M8 20 120 10 20 7.5 521657
40 M8 20 120 10 511161 20 160 4 20 3 521450
20 160 5 511450 40 28 150 6 20 5.5 521401
40 25 150 6 511401 35 M10 25 120 8 20 6.5 521452
35 M10 25 120 8 511452 40 120 10 20 7.5 521454
45 120 11 20 9 521456
40 120 10 511454
45 120 11 511456 25 300 6 25 4.5 521580
50 35 M10 25 250 8 25 7 521581
25 300 6 511525 45 190 11 25 9 521582
50 35 M10 25 250 9 511535 25 400 5 30 4.5 521601
45 190 11 511545 60 36 M10 25 300 8 30 7 521603
22 350 3 513601 45 250 11 30 9 521641
35 450 8 35 6.5 521705
60 2536 M10 25 400
300
6
9
511625
511635 70 50 M10 25 350 11 35 11 521710
45 250 11 511645 70 300 14 35 15 521711
35 450 9 511735 40 M12 28 600 9 40 7 521658
70 50 M10 25 350 12 511750 30 45 950 7 40 5 521803
70 300 14 511770 80 30 35 950 7 40 5 521840
40 M14 35 600 9 40 7 521841
25 45 1100 6 513801 70 35 500 17 40 15 521842
30 35 950 8 511830 80 35 450 19 40 17 521843
80 40 M14 35 600 10 511840 40 1100 8 60 7 521908
70 35 500 17 511870 100 55 M16 47 900 12 60 10 521909
80 35 450 19 511880 80 750 19 60 17 521910
Threaded hole fixing on request (except Ø 12.5). *The shear characteristics are measured under Axial Load.
See current price list for availability of items. **See VIBRACHOC elastomer range : references E3RP.

35
 COMBINATION FIXING THREADED HOLE FIXING
ØA
ØA
ØC
ØC

B
B

H
ØC

Compression Shear* Compression Shear*

Ø A B Ø C G H Max. Max. Ref. Ø A B Ø C H Max. Max. Ref.
mm mm mm mm mm load Deflect.
mm load
Deflect.
mm
mm mm mm mm load Deflect.
mm load
Deflect.
mm
daN daN daN daN
10 M4 10 2 20 1.5 2.5 1.5 520053 10 M4 2.5 20 1.5 2.5 1.5 520550
15 3 2.5 520054 15 20 3 2.5 2 520551
16 10 20 1.5 2.5 1.5 520010 16 10 20 1.5 2.5 1.5 520500
15 20 3 2.5 2 520011 15 M5 3 20 3 2.5 2 520501
M5 12 3 20 15 4 2.5 4 520502
20 15 4 2.5 4 520012
25 15 5 2 5 520013 25 15 5 2 5 520503
15 35 2.5 5 2.5 520015 15 35 2.5 5 2.5 520505
20 30 4.5 5 5 520016 20 30 4.5 5 3.5 520506
20 M6 16.5 4 20 M6 4
25 30 5.5 4.5 4.5 520017 25 30 5.5 4.5 4.5 520507
30 25 7 4.5 4.5 520018 30 25 7 4.5 4.5 520508
15 60 2.5 8 8.5 520052 20 50 3 8 4 520554
M6 4
20 M6 18 4 50 3.5 8 4 520055 30 50 7.5 8 6 520555
30 50 7.5 8 6 520057 22 50 3 8 4 520511
25.5
25.5 22 50 3.5 8 4 520021 25 50 4.5 8 4.5 520512
M8 6
25 50 5 8 4.5 520022 30 50 7.5 8 6 520513
M8 20 6 40 50 10 6 6 520514
30 50 7.5 8 6 520023
40 50 10 6 6 520024 22 80 4 11 4 520516
15 90 3 11 2.5 520025 30 30 M8 6 70 7.5 11 6 520517
22 80 4.5 11 4 520026 40 60 9 11 7.5 520518
30 M8 25 6
30 70 7.5 11 6 520027 30 150 4.5 20 5.5 520552
40 60 9 11 7.5 520028 M8 6
40 120 10 20 7.5 520553
30 150 4.5 20 5.5 520056 28 150 4.5 20 5.5 520520
M8 20 6 40
40 120 10 20 7.5 520058 35 120 7 20 6.5 520521
40 M10 8 120 10 20 7.5 520522
20 160 4 20 3 520029
40 28 150 5 20 5.5 520030 45 120 11 20 9 520523
35 M10 25 8 120 7.5 20 6.5 520031 35 250 7 25 7 520525
40 120 10 20 7.5 520032 50 M10 8
45 120 11 20 9 520033 45 190 10 25 9 520526
35 250 8 25 7 520035 36 300 7 30 7 520528
50 M10 25 8 60 M10 8
45 190 11 25 9 520036 45 250 9 30 9 520529
35 450 7 35 6.5 520530
36 M10 25 8 300 8 30 7 520038
60 10 70 50 M10 9 350 9 35 11 520531
45 250 30 9 520039 70 300 14 35 15 520532
35 450 7.5 35 6.5 520040
70 50 M10 25 9 350 10 35 11 520041 40 M12 10 120 10 20 7.5 520556
70 300 14 35 15 520042 80 40 600 7 40 7 520534
40 M12 28 10 600 7 10 7 520059 70 M14 12 500 17 40 15 520535
40 600 8 40 7 520044 80 450 19 40 17 520536
80
70 M14 35 12 500 17 40 15 520045 40 1110 8 60 7 520541
80 400 19 40 17 520046 55 900 12 60 10 520542
100 60
40 1100 8 60 7 520100 1100 8 180 10 520545
M16 14
55 900 12 60 10 520101 75 600 10 140 12 520546
100 M16 47 14 80 750 19 60 17 520543
80 750 12 60 17 520102
100 600 23 60 20 520103 100 600 23 60 20 520547
Ø 16 mounts with threaded holes are fitted with RAPID nuts. Maximum See current price list for availability of items.
torque 1.8 m.N. * Shear characteristics are measured under axial load.

ONE THREADED HOLE

ØA Compression
ØA B H
ØC Max load Deflect. Ref.
ØC mm mm mm
daN mm
10 20 2 511152
! 16 15 M4 2,5
20 3 511153
w
H

Ne 20 15 M6 4 35 4 511154
15 60 3,5 511164
B

25,5 20 M6 4 55 5,5 511162

30 50 8 511163
30 22 M8 6 80 6 511156

36
DIABOLO MOUNTS
ØC

G
F

B
(cm²)

G
P
ØC

ØA

Compression Shear*
ØA B G S
ØC Max M ax Ref.
mm mm mm cm² Load Deflec Deflec
-tion Load -tion
daN mm daN mm
12.5 14 M5 10 0.3 3 1.4 0.5 1.2 521300
20 19 M6 16.5 1.6 12 2.5 3 5 521201
40 28 M10 25 3.1 30 5 2.5 4.5 521403
57 44 M8 20 5 40 5 7 5 521571
57 44 M8 20 9.5 75 5 12 6 521572
60 60 M10 25 19.5 150 8 30 10 521602
80 70 M14 35 38.5 300 9.5 55 9.5 521801
95 76 M16 45 50 400 9.5 70 8 521951
See current price list for availability of items.
* Shear characteristics’ are measured under axial load.

Also available with Ø 30 locators on each end, 3 mm thick allow M14 threaded holes :
Depth Compression Shear*
ØA B of S
ØC Max Deflec Max Deflec Ref.
mm mm thread cm² Load -tion Load -tion
mm daN mm daN mm
80 60 M14 15.5 38.5 250 5 70 8 521802

ASSEMBLY

Compression/Shear Shear

Compression The fixing holes for the Radiaflex mounts

should have a chamfer with a depth equal
to the pitch of the thread.
Ex. 521401 : M10 x 150 chamfer = 1.5 mm
521951 : M16 x 200 chamfer = 2 mm

37