Scribd
Upload
250 views

ICS Session 03. LECTURE PPT - Lab Setup Vmware and Kali Linux v1

This document provides instructions for setting up a virtual lab environment for cyber security training and practice. It recommends downloading and installing VMware Workstation 16 along with virtual machines like Kali Linux, Windows 10, and Windows 7. The virtual machines should be configured with NAT networking and DHCP addressing between 10.0.0.2-19 to allow communication between systems. Step-by-step instructions detail downloading software, configuring the VMware network settings, installing each virtual machine, and testing connectivity before taking snapshots of the virtual machine environments.

Uploaded by

dusex
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
250 views

ICS Session 03. LECTURE PPT - Lab Setup Vmware and Kali Linux v1

This document provides instructions for setting up a virtual lab environment for cyber security training and practice. It recommends downloading and installing VMware Workstation 16 along with virtual machines like Kali Linux, Windows 10, and Windows 7. The virtual machines should be configured with NAT networking and DHCP addressing between 10.0.0.2-19 to allow communication between systems. Step-by-step instructions detail downloading software, configuring the VMware network settings, installing each virtual machine, and testing connectivity before taking snapshots of the virtual machine environments.

Uploaded by

dusex
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

PRACTICAL LAB

ENVIRONMENT SETUP

Arman Hasen (CCIE)


INTRODUCTION TO CYBER SECURITY TRAINING COURSE (NETWORKWALKS ACADEMY) ([email protected])
Lab Setup (for Cyber Security & Hacking practice)

Network Settings on all


VM’s: NAT
DHCP: 10.0.0.2-19 /24

Main OS
(Windows10) Network Settings:
DHCP: 10.0.0.2/24 (NAT)

DHCP: 10.0.0.x/24 (NAT) DHCP: 10.0.0.x/24 (NAT) DHCP: 10.0.0.x/24 (NAT)

Windows 7 Server 2016


(Optional)

www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)

*You can download all Software from official websites directly OR from your Google Drive that has been shared with you in your WELCOME Pack email (contact
your course admin at networkwalks if you have not received your shared drive access yet)
www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)

Follow the step by step video guide

Step 1. Download & Install Vmware WS 16 on your computer or laptop (from your Google Drive)

Step 2. Configure the network settings on your Vmware before installing the Virtual Machines

Step 3. Download & Install Kali Linux on your Vmware Virtual Machine https://offensive-security.com/kali-linux-vm-vmware-virtualbox-image-download/

Step 4. Download & Install Windows 10 on your Vmware Virtual Machine (from your Google Drive)

Step 5. Download & Install Windows 7 on your Vmware Virtual Machine

Step 6. Configure & test the network settings on your new VM’s (All VM’s should be reachable from each other)

Step 7. Take snapshots of each VM after completing the initial setup

*There will be further offline Virtual Machines for CTF practical Labs & challenges

www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)
Vmware Settings

www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)
Vmware Settings

www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)
Vmware Network Settings

www.networkwalks.com
Lab Setup (for Cyber Security & Hacking practice)
Vmware Network Settings

www.networkwalks.com
Thank You

You might also like