For details about certified products

conforming to international standards,

visit us at www.smcworld.com.

5 Port Solenoid Valve

Body Ported

Series VZ3000
How to Order VK

or
VZ

ss
re
pp
su

e
ge
VF
n

iz
e
io

lta

s
d
ry
at

ge

rri

rt
vo
nt
tu

po
n

ve
lta

le
tio

ge
ac

lo

)
vo

ca

(B
ur
op

VFR
of

ua

n
/S
tri

/2
ed

io
dy
e

ht
ec

an

A)
p

pt
at
Bo

Lig
Ty

El

4(
M

O
R

Body ported VZ3 1 2 0 5 L M5 VP4

Type of actuation VZS
2 position single Option
F: With foot bracket VFS
1 (2 position
single type only)
Body option VS4
0: Individual exhaust
2 position double for the pilot valve U: With silencer VQ7

2 EVS
K: With foot bracket
3(R) port PE port
and silencer VFN
(2 position single only)
3 position closed center
3: Common exhaust type Note) The bracket and silencer
for main and pilot valve are not assembled.
3
4(A), 2(B) port size
M5 M5 x 0.8
C4 One-touch fitting for ø4
3 position exhaust center PE port
3(R) port C6 One-touch fitting for ø6
Note) 1(P), 5(R1), 3(R2) port: M5 x 0.8
4
Rated voltage
1 100 VAC, 50/60 Hz Manual override
2 200 VAC, 50/60 Hz Nil: Non-locking push type C: Locking type C (Manual)
3 position pressure center 3∗ 110 VAC, 50/60 Hz
4∗ 220 VAC, 50/60 Hz
5∗ 24 VDC B: Locking type B
5
6 12 VDC (Slotted)
9∗ Other
∗ Option

Electrical entry Light/Surge voltage suppressor

Grommet L plug connector M plug connector DIN terminal Nil None
G: Lead wire length L: With lead wire M: With lead wire MN: Without D: With connector Z∗ With light/surge voltage suppressor
300 mm (Length 300 mm) (Length 300 mm) lead wire With surge voltage suppressor
S
∗ Not available for “GZ”, “HZ” and “DOZ”

H: Lead wire length LN: Without LO: Without MO: Without DO: Without
600 mm lead wire connector connector connector

∗ Type “LN”, “MN”: With 2 sockets.

3-3-17
Series VZ3000
Specifications
Applicable for cylinder Fluid Air
2 position single 0.15 to 0.7
actuation (up to ø40). Operating pressure
2 position double 0.1 to 0.7
range (MPa)
Compact size 3 position 0.15 to 0.7
Ambient and fluid temperature (°C) –10 to 50°C (No freezing. Refer to page 3-13-4.)
(Width: 15 mm)
Response time (ms) (1) 2 position single, double 20 or less
Low power consumption: (at the pressure of 0.5 MPa) 3 position 35 or less
Max. operating 2 position single, double 10
1.8 W DC frequency (Hz) 3 position 3
Effective area Refer to the table below.
Manual override (2) Non-locking push type, Locking slotted type, Locking lever type
Pilot exhaust method Individual pilot exhaust type, Common exhaust (pilot and main valve) type
Lubrication Not required
Mounting orientation Unrestricted
Impact/Vibration resistance (m/s2 )(3) 300/50
Enclosure Dustproof
Note 1) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature: 20°C, at
rated voltage, without surge suppressor)
Note 2) When operating the locking type manually, apply torque of 0.2 N·m or less.
Note 3) Impact resistance: No malfunction occurred when it is tested with a drop tester in the
axial direction and at the right angles to the main valve and
armature in both energized and de-energized states every once for
each condition. (Values at the initial period)
Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000
Hz. Test was performed at both energized and de-energized states
in the axial direction and at the right angles to the main valve and
armature. (Values at the initial period)

Solenoid Specifications ∗ Option

Grommet (G)/(H), L plug connector (L),
Electrical entry
M plug connector (M), DIN terminal (D)
AC 50/60 Hz 100, 200, 24∗, 48∗, 110∗, 220∗
Coil rated voltage (V)
DC 24, 6∗, 12∗, 48∗
Allowable voltage fluctuation (%) –15 to +10% of rated voltage
Power consumption (W) Note) 1.8 (With indicator light 2.1)
[Current mA] DC
[24 VDC: 75 (With indicator light 87.5)]
Note) Inrush 100 VAC: 45/50 Hz, 42/60 Hz
4.5/50 Hz, 4.2/60 Hz
Apparent power (VA) 200 VAC: 22.5/50 Hz, 21/60 Hz
AC
Refer to pages 3-3-24 to 3-3-27 for manifold use. [Current mA] 100 VAC: 35/50 Hz, 30/60 Hz
Holding 3.5/50 Hz, 3/60 Hz
200 VAC: 17.5/50 Hz, 15/60 Hz
Surge voltage suppressor DC: Diode, AC: ZNR
Indicator light DC: LED (Red), AC: Neon bulb
Note) At rated voltage

Made to Order Specifications

(For details, refer to page 3-3-85.)
Option
Description Part no. Note
With foot DXT170-34-1B For VZ312 3
0
bracket
Noise reduction: 21dB or more
Silencer AN120-M5
(ø8 x 17 mm)

3-3-18
 5 Port Solenoid Valve
Body Ported Series VZ3000
Flow Characteristics/Weight
Port size Flow characteristics Note)
Weight (g)
Valve model Type of actuation 1, 5, 3 4, 2 1
4/2 (P
A/B) 4/2
5/3 (A/B
EA/EB)
(P, EA, EB) (A, B) C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv Grommet
2 Single 75
position 0.47 0.41 0.13 0.47 0.41 0.13
Double 120
VZ320--M5 Closed center M5 x 0.8 M5 x 0.8 0.49 0.44 0.13 0.44 0.40 0.12
3
position Exhaust center 0.46 0.37 0.12 0.47 [0.39] 0.43 [0.35] 0.13 [0.10] 130
Pressure center 0.49 [0.39] 0.51 [0.38] 0.14 [0.10] 0.45 0.42 0.12
2 Single 75
0.69 0.39 0.18 0.44 0.39 0.12
position Double C4 120 VK
VZ320--C4 Closed center M5 x 0.8 (One-touch 0.69 0.40 0.19 0.43 0.40 0.12
3
Exhaust center fitting for ø4) 0.56 0.40 0.15 0.41 [0.41] 0.37 [0.37] 0.10 [0.11] 130
position
Pressure center 0.57[0.41] 0.4 [0.37] 0.15 [0.10] 0.41 0.37 0.10
VZ
2 Single 75
position Double C6
0.70 0.36 0.19 0.47 0.40 0.12 120 VF
VZ320--C6 Closed center M5 x 0.8 (One-touch 0.72 0.37 0.19 0.44 0.34 0.12
3
position Exhaust center fitting for ø6) 0.67 0.54 0.19 0.41 [0.41] 0.38 [0.38] 0.11 [0.11] 130 VFR
Pressure center 0.82 [0.44] 0.41 [0.39] 0.23 [0.12] 0.41 0.36 0.11
Note) [ ]: Denotes the normal position. Exhaust center: 4/2
5/3, Pressure center: 1
4/2 VP4

Use as a guide for selection.

VZS
Cylinder Speed Chart Please confirm the actual conditions with SMC Sizing Program.
Bore size VFS
Series CJ2 Series CM2
Average
Series
Pressure 0.5 MPa
speed Load factor 50%
Pressure 0.5 MPa VS4
Load factor 50%
(mm/s) Stroke 60 mm Stroke 300 mm
ø6 ø10 ø16 ø20 ø25 ø32 ø40
VQ7
800 Perpendicular,
700
600
upward actuation EVS
Horizontal actuation
500
VZ3120-M5 400 VFN
300
200
100
0
∗ It is when the cylinder is extending that is meter-out controlled by speed controller which is
directly connected with cylinder, and its needle valve with being fully open.
∗ The average velocity of the cylinder is what the stroke is divided by the total stroke time.
∗ Load factor: ((Load weight x 9.8)/Theoretical force) x 100%

Conditions
Body ported Series CJ2 Series CM2 Series MB
Tube bore x Length ø4 x 1 m ø6 x 1 m ø8 x 1 m
SZ3120-M5 Speed controller AS1301F-04 AS3301F-06 AS3301F-08
Silencer AN120-M5 AN110-01

3-3-19
Series VZ3000
Construction
2 position single 2 position double

3 position closed center 3 position closed center/exhaust center/pressure center

3 position exhaust center

3 position pressure center

(This figure shows a closed center type.)

Component Parts Replacement Parts

No. Description Material Note No. Description Material Part no. Note
q Body Aluminum die-casted Platinum silver u Solenoid assembly Epoxy/Stainless steel DXT170-C-
w Piston plate Resin Black Common with
i O-ring NBR 13 x 11 x 1
e Piston Resin Series VZ 15000
r Spool valve Aluminum, HNBR
t End cover Resin
y Spool spring Stainless steel

3-3-20
 5 Port Solenoid Valve
Body Ported Series VZ3000
2 Position Single
VZ3120
Grommet (G), (H) Mounting hole for manifold
H-M5
VZ3120-G

Manual override
VK
(Non-locking)

(Lead wire length)

VZ

G: 300 mm
H: 600 mm
Bracket
VF
VFR
VP4
VZS
(Mounting hole)
VFS
(Mounting screw) (Mounting
hole) VS4
(PE port)
VQ7
EVS
(Piping port) VFN
L plug connector (L) M plug connector (M)
(Lead wire length)

VZ3120-L-M5 VZ3120-M-M5

≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in One-touch fittings

VZ3120-D-M5 VZ3120--C4 C6
MAX. 10
C6: MAX. 7.5
C4: MAX. 7

Applicable cable O.D. 2-One-touch fitting

ø3.5 to ø7
(A, B port)
Applicable tubing model
C4: T0425
C6: T0604

3-3-21
Series VZ3000
2 Position Double
VZ3220

Grommet (G), (H)

H-M5
VZ3220-G

Manual override
(Non-locking)

(Lead wire length)

Mounting hole for manifold

G: 300 mm
H: 600 mm
(Mounting hole)

(PE port)

(Piping port)

L plug connector (L) M plug connector (M)

(Lead wire length)

VZ3220-L-M5 VZ3220-M-M5

≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in One-touch fittings

VZ3220-D-M5 VZ3220-- C4 C6

MAX. 10
C6: MAX. 7.5
C4: MAX. 7

Applicable cable O.D. 2-One-touch fitting

ø3.5 to ø7 (A, B port)
Applicable tubing model
C4: T0425
C6: T0604

3-3-22
 5 Port Solenoid Valve
Body Ported Series VZ3000
3 Position Closed Center/Exhaust Center/Pressure Center
VZ3320
Grommet (G), (H)
3
H-M5
VZ3 45 20-G
VZ3420

VK
Manual override
(Non-locking) VZ3520
VZ

(Lead wire length)

(Mounting hole for manifold)
VF

G: 300 mm
H: 600 mm
VFR
VP4
VZS
VFS

(Mounting hole)
VS4
VQ7
2-M5 x 0.8 (PE port)

EVS
VFN

(Piping port)

L plug connector (L) M plug connector (M)

3 3
(Lead wire length)

VZ3 4 20-L-M5 VZ3 4 20-M-M5

5 5

≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in One-touch fittings

3 3
VZ3 45 20-D-M5 VZ345 20-- C4
C6

MAX. 10
C6: MAX. 7.5

2-One-touch fitting
C4: MAX. 7

Applicable cable O.D.

(A, B port)
ø3.5 to ø7 Applicable tubing model
C4: T0425
C6: T0604

3-3-23
 Series VZ3000/Body Ported
Manifold Specifications
Manifold Standard
Manifold Specifications
Model Type 20
Manifold type Single base/B mount
P(SUP)/R(EXH) Common SUP/Common EXH
Valve stations 2 to 20 stations
4(A), 2(B) port location Valve
1(P), 3/5(R) port Rc 1 8
Port size
4(A), 2(B) port M5 x 0.8, C4, C6

Flow Characteristics
Port size Flow characteristics
Manifold 1(P), 5/3(R) 2 (B), 4(A) 1
4/2 (P
A/B) 4/2
5/3 (A/B
R)
port port C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv
1/8 M5 x 0.8 0.46 0.39 0.12 0.75 0.32 0.19
Body ported Type
VZ32 1/8 C4 0.62 0.33 0.16 0.83 0.27 0.20
For internal pilot VV5Z3-20
1/8 C6 0.79 0.36 0.21 0.91 0.36 0.24
Note) Value at manifold base mounted, 2 position single operating

How to Order Manifold

Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along
with the manifold base model no.
(Example) VV5Z3-20-031.............. 1 pc. (Manifold base)
∗VZ3120-5G-M5........... 2 pcs. (Valve)
∗DXT192-13-1A ........... 1 pc. (Blanking plate assembly)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

Flat Ribbon Cable Manifold

Flat Ribbon Cable Manifold Specifications
Model Type 20P
• One-touch wiring to Manifold type Single base/B mount
consolidate connection of P(SUP), R(EXH) Common SUP/Common EXH
external wires. Valve stations 3 to 12 stations
4(A), 2(B) port location Valve
• Clean appearance Port size
1(P), 3/5(R) port Rc 1 8
The flat cable provides wiring on a 4(A), 2(B) port M5 x 0.8, C4, C6
printed circuit board to the individual Applicable flat ribbon Socket: 26 pins MIL, with strain relief
valves at the manifold base, enabling cable connector (Conforming to MIL-C-83503)
the consolidation of external wiring at Internal wiring + COM (For – COM specifications, specify them separately.)
a touch through a 26 pins MIL 1
M5
connector. Applicable valve model VZ323- 35 MOZ- C4
6 C6

Rated voltage 100 VAC 50/60 Hz, 110 VAC 50/60 Hz, 24 VDC, 12 VDC
Note ) Withstand voltage specifications of wiring unit part is equivalent to JIS C 0704 class 1.

Flow Characteristics
Port size Flow characteristics
Manifold 1(P), 5/3(R) 2(B), 4(A) 1
4/2 (P
A/B) 4/2
5/3 (A/B
R)
port port C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv
1/8 M5 x 0.8 0.46 0.39 0.12 0.75 0.32 0.19
Body ported Type VZ323 1/8 C4 0.62 0.33 0.16 0.83 0.27 0.20
For internal pilot VV5Z3-20P
1/8 C6 0.79 0.36 0.21 0.91 0.36 0.24
Note) Value at manifold base mounted, 2 position single operating

How to Order Manifold

Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted
on the manifold along with the manifold base model no.
(Example) VV5Z3-20P-07................... 1 pc. (Manifold base)
∗VZ3123-5MOZ-C4............ 3 pcs. (Valve)
∗VZ3223-5MOZ-C4............ 3 pcs. (Valve)
∗DXT192-13-3A................. 1 pc. (Blanking plate assembly)
∗DXT192-52-1-4A.............. 3 pcs. (Connector assembly)
∗DXT192-52-2-4A.............. 3 pcs. (Connector assembly)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

3-3-24
 5 Port Solenoid Valve
Body Ported Series VZ3000
Common SUP/Common EXH Option
Type 20 Applicable solenoid valve
How to Order G
M5 Installation of the VZ300 Valve
VZ32- LM - C4
D C6 on the VZ3000 Manifold
VV5Z3 20 05 1 Applicable blanking plate • Use of an adaptor plate makes it
4(A), 2(B) assembly possible to mount Series VZ300 on the
port Stations P, R port DXT192-13-1A manifold base of Series VZ3000.
02 2 stations thread type Individual EXH spacer • The mounting direction is shown in the
assembly diagram below. Mount the solenoid so

···
··· Nil Rc
DXT192-21-1A that it will be on the same side as the
1(P) port 20 20 stations 00F G
Rc 1/8 00N NPT
Individual SUP spacer single solenoid of the Series VZ3000. VK
assembly
00T NPTF DXT192-40-2A
3/5 (R) port
Rc 1/8 Adapter plate assembly
VZ
Applicable solenoid valve DXT200-3-2A
Flat Ribbon Cable Type 20P VF
1
How to Order VZ323- 35 MOZ- C4
M5
6 C6
VFR
VV5Z3 20P 05 Applicable blanking plate
assembly
Stations P, R port
DXT192-13-3A
Applicable connector
VP4
4(A), 2(B) Series VZ300
03 3 stations thread type assembly Body ported
port DXT192-52-1-A ∗ VZS
···
···

Nil Rc
(For 2 position single) Adapter plate assembly
12 12 stations 00F G DXT192-52-2-A ∗
1(P) port
Rc 1/8
00N NPT (For 2 position double, Manifold gasket Round head
VFS
00T NPTF 3 position) combination screw
Refer to the page 3-10-33
3/5 (R) port regarding how to order VS4
Rc 1/8 applicable connector Adapter plate
assemblies. (1: 100 VAC, 3:
Option 110 VAC, 4: DC). VQ7
Adapter gasket
Combinations of Solenoid Valve, Blanking Plate Assembly EVS
Gasket and Manifold Base DXT192-13-1A
VFN
Round head combination screw Round head combination screw Applicable base
M2.5 x 7 VV5Z3-20
(With spring washer) (With spring washer) VV5Z3-21
Blanking plate

Individual SUP Spacer Assembly

Gasket
DXT192-40-2A
Round head
combination screw
Gasket Applicable base
Applicable base M2.5 x 40.5
VV5Z3-20 (With spring
VV5Z3-20 VV5Z3-21 washer)
VV5Z3-20P
VV5Z3-21 DXT192-13-3A Round head
combination screw
Individual EXH Spacer Assembly M2.5 x 7
(With spring washer)
DXT192-21-1A Blanking plate
Round head
combination screw
M2.5 x 36
(With spring Gasket
washer)

Dust cap
Gasket

Individual
SUP spacer
Gasket
Applicable base VV5Z3-20P
Individual Gasket
EXH spacer Note) Please contact SMC when using an
individual SUP spacer assembly, an
individual EXH spacer assembly, or an Applicable base
adapter plate assembly on type 20P. Rc 1/8 VV5Z3-20
Gasket 1(P) port VV5Z3-21
Caution
Applicable base
(5(R1), 3(R2) port) Mounting Screw Tightening Torques M2.5: 0.45 N·m
VV5Z3-20
VV5Z3-21
3-3-25
Series VZ3000
Type 20 Manifold
VV5Z3-20- Station 1

Grommet (G), (H)

(4(A), 2(B) port)

(Pitch)

(Mounting
hole)

6-Rc 1/8
(1(P), 3/5(R) port)

G: 300 mm
Manual override H: 600 mm
(PE port)
(Non-locking) (Lead wire length)

(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 58 74 90 106 122 138 154 170 186 202 218 234 250 266 282 298 314 330 346
L2 40 56 72 88 104 120 136 152 168 184 200 216 232 248 264 280 296 312 328

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in One-touch
fittings

≅300
(Lead wire length)

C4: MAX. 7
C6: MAX. 7.5

2n-One-touch fitting
(Lead wire length)

(A, B port)
Applicable tubing model
C4: T0425
C6: T0604
≅300

Applicable cable O.D.

ø3.5 to ø7

: With light/surge voltage suppressor

3-3-26
 5 Port Solenoid Valve
Body Ported Series VZ3000
Type 20P Flat Ribbon Cable Manifold

VV5Z3-20P- Station

VK
Manual override VZ
(Non-locking)
VF
4(A), 2(B) port
VFR

(Pitch)
VP4
6-Rc 1/8
(Mounting hole)
1(P), 3/5(R) port VZS
VFS
VS4
VQ7
EVS
Triangle mark
(Light/Surge voltage suppressor) VFN
(Station n)························(Station 1)

Connector polarity indicator

Applicable connector: 26 pins MIL
(Conforming to MIL-C-83503)

(mm)
Stations 3 4 5 6 7 8 9 10 11 12
L1 77 94.5 112 129.5 147 164.5 182 199.5 217 234.5
L2 59 76.5 94 111.5 129 146.5 164 181.5 199 216.5

Built-in One-touch fittings

C4: MAX. 7
C6: MAX. 7.5

2n-One-touch fitting
(A, B port)
Applicable tubing model
C4: T0425
C6: T0604

3-3-27
 For details about certified products
conforming to international standards,
visit us at www.smcworld.com.

5 Port Solenoid Valve

Base Mounted

Series VZ3000
How to Order VK

or
VZ

ss
re
pp
su
ge
VF
n

de
io

lta
ry
at

ge

rri
vo
nt
tu

ve
lta

le
tio

ge
ac

Note) Please contact SMC in the case

lo
vo

e
ca

ur
op

VFR

iz
of

ua
/S
tri
ed

s
of without indicator light.
dy
e

ht
ec

an

rt
p

at
Bo

Po
Lig
Ty

El

M
R

VZ3 1 4 3 5 F Z Note)
VP4

pe
Plug-in

ty
ad
re
VZS

Th
Non plug-in VZ3 1 4 0 5 L
VFS
Type of actuation


Thread type
2 position single
Nil Rc VS4
F G
1 N NPT VQ7
Body option
T NPTF
0: Individual exhaust
for the pilot valve

Port size EVS
2 position double Nil: Without sub-plate 01: Rc 1 8 With sub-plate
VFN
2
3(R) port PE port
3: Common exhaust type
for main and pilot valve
3 position closed center

Manual override/Plug-in type

3 Nil: Non-locking B: Locking type B C: Locking type C
3(R) port PE port push type (Slotted) (Manual)

3 position exhaust center

Rated voltage

1 100 VAC, 50/60 Hz
4 2 200 VAC, 50/60 Hz
1
1

3∗
0

110 VAC, 50/60 Hz

4∗ 220 VAC, 50/60 Hz
5∗ 24 VDC
3 position pressure center Manual override/Non plug-in type
6 12 VDC
9∗ Other Nil: Non-locking B: Locking type B C: Locking type C
5 push type (Slotted) (Manual)
∗ Option

Electrical entry

Grommet L plug connector M plug connector DIN terminal
G: Lead wire L: With lead wire M: With MN: Without D: With connector
length (Length 300 mm) lead wire lead wire
300 mm (Length 300 mm)

Light/Surge voltage suppressor

Nil None
Z∗
H: Lead wire LN: Without LO: Without MO: Without DO: Without With light/surge voltage suppressor
length lead wire connector connector connector
600 mm S With surge voltage suppressor
∗ Not available for “GZ”, “HZ” and “DOZ”

∗ Type “LN”, “MN”: With 2 sockets.

3-3-29
Series VZ3000
Specifications
Applicable for cylinder Fluid Air
2 position single 0.15 to 0.7
actuation (up to ø40). Operating pressure
2 position double 0.1 to 0.7
range (MPa)
Compact size 3 position 0.15 to 0.7
Ambient and fluid temperature (°C) –10 to 50°C (No freezing. Refer to page 3-13-4.)
(Width: 15 mm) Response time (ms) (1) 2 position single, double 20 or less
(at the pressure of 0.5 MPa)
Low power consumption: 3 position 35 or less
Max. operating 2 position single, double 10
1.8 W DC frequency (Hz) 3 position 3
Manual override (2) Non-locking push type, Locking slotted type, Locking lever type
Pilot exhaust method Individual pilot exhaust type, Common exhaust (pilot and main valve) type
Lubrication Not required
Mounting orientation Unrestricted
Impact/Vibration resistance (m/s2 )(3) 300/50
Enclosure Dustproof
Note 1) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature: 20°C, at
rated voltage, without surge suppressor)
Note 2) When operating the locking type manually, apply torque of 0.2 N·m or less.
Note 3) Impact resistance: No malfunction occurred when it is tested with a drop tester in the
axial direction and at the right angles to the main valve and
armature in both energized and de-energized states every once for
each condition. (Values at the initial period)
Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000
Hz. Test was performed at both energized and de-energized states
in the axial direction and at the right angles to the main valve and
armature. (Values at the initial period)

Solenoid Specifications ∗ Option

Grommet (G)/(H), L plug connector (L),
Electrical entry
M plug connector (M), DIN terminal (D)
AC 50/60 Hz 100, 200, 24∗, 48∗, 110∗, 220∗
Coil rated voltage (V)
DC 24, 6∗, 12∗, 48∗
Allowable voltage fluctuation (%) –15 to +10% of rated voltage
Power consumption (W) (1) 1.8 (With indicator light 2.1)
[Current mA] DC
[24 VDC: 75 (With indicator light 87.5)]

Inrush 100 VAC: 45/50 Hz, 42/60 Hz

4.5/50 Hz, 4.2/60 Hz
Apparent power (VA) (1) 200 VAC: 22.5/50 Hz, 15/60 Hz
AC
[Current mA] Note) 100 VAC: 35/50 Hz, 30/60 Hz
Holding 3.5/50 Hz, 3/60 Hz
200 VAC: 17.5/50 Hz, 15/60 Hz
Refer to pages 3-3-37 to 3-3-52 for manifold use. Surge voltage suppressor DC: Diode, AC: ZNR (2)
Indicator light DC: LED (Red), AC: Neon bulb
Note 1) At rated voltage
Note 2) Plug-in should be ZNR.

Combinations of Solenoid Valve and Gasket

Round head
combination screw
M2.5 x 25
Made to Order Specifications (With spring washer)
(For details, refer to page 3-3-85.)

Gasket
DXT192-10-5
(Use caution to the orientation.)

3-3-30
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Flow Characteristics/Weight
Port size Flow characteristics (1)
Weight (g)
Valve model Type of actuation 1, 5, 3 4, 2 1
4/2 (P
A /B) 4/2
5/3 (A/B
EA/EB)
(P, EA, EB) (A, B) C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv Grommet
2 Single 125 (75)
0.79 0.21 0.19 0.83 0.32 0.21
position Double 170 (120)
VZ340--01 Closed center Rc 1/8 Rc 1/8 0.80 0.28 0.18 0.86 0.34 0.20
3
position Exhaust center 0.71 0.26 0.18 1.1 [0.60] 0.24 [0.44] 0.26 [0.18] 180 (130)
Pressure center 0.99 [0.47] 0.29 [0.38] 0.24 [0.12] 0.72 0.38 0.18
Note 1) [ ]: Denotes the normal position. Exhaust center: 4/2
5/3, Pressure center: 1
4/2
Note 2) ( ): Without sub-plate. VK
Use as a guide for selection.
Cylinder Speed Chart Please confirm the actual conditions with SMC Sizing Program. VZ
Bore size
Series CM2 VF
Average
Series speed Pressure 0.5 MPa
(mm/s) Load factor 50% VFR
Stroke 300 mm
ø20 ø25 ø32 ø40
VP4
800 Perpendicular,
700 upward actuation
600 Horizontal actuation VZS
VZ314--01 500
(Piping: ø4 x 1 m) 400 VFS
300
200 VS4
100
Speed controller/Silencer AS2301F-01-04/AN110-01 VQ7
800 Perpendicular, EVS
700 upward actuation
600 Horizontal actuation
500
VFN
VZ314--01
(Piping: ø6 x 1 m) 400
300
200
100
Speed controller/Silencer AS3301F-02-06/AN110-01

Bore size
Average Series CA1
Series speed Pressure 0.5 MPa
(mm/s) Load factor 50%
Stroke 400 mm
ø40 ø50 ø63 ø80 ø100
800 Perpendicular,
700 upward actuation
600 Horizontal actuation
VZ314--01 500
(Piping: ø6 x 1 m) 400
300
200
100
Speed controller/Silencer AS3301F-02-06/AN110-01

800 Perpendicular,
700 upward actuation
600 Horizontal actuation
500
VZ314--01
(Piping:ø8 x 1 m) 400
300
200
100

Speed controller/Silencer AS3301F-02-08/AN110-01

∗ It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with
cylinder, and its needle valve with being fully open.
∗ The average velocity of the cylinder is what the stroke is divided by the total stroke time.
∗ Load factor: ((Load weight x 9.8)/Theoretical force) x 100%

3-3-31
Series VZ3000
Built-in Speed Controllers
VZ35 B
R)
Throttle Valve Characteristics (A

An exhaust throttle valve is built into the solenoid valve itself, enabling a
simple speed adjustment of the cylinder.

If it is mounted on a manifold base, the exhaust air will converge in the
common EXH port at the manifold base, thus simplifying the handling of
the exhaust air.

Effective area (mm2)

JIS Symbol

(Single)

(Fully (Fully
closed) open)
Numbers of needle rotations (turns)

Note) • To use the VZ353, open the throttle valve one turn
or more from the fully closed position.
• To adjust the throttle valve apply torque of 0.3 N·m or
less.
How to Order Valve with Built-in Speed Controller • Be careful not to open the throttle valve excessively
as this could cause the throttle valve to fly out.
Non plug-in VZ3 5
Thread type
Type of actuation
Port size
Body option
Manual override
Rated voltage
Light/Surge voltage suppressor
Electrical entry

3-3-32
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Construction
2 position single 2 position double

VK
VZ
VF
VFR
VP4
VZS
VFS
VS4
VQ7
3 position closed center/exhaust center/pressure center
EVS
3 position closed center
VFN

3 position exhaust center

3 position pressure center

(This figure shows a closed center type.)

Component Parts Replacement Parts

No. Description Material Note No. Description Material Part no. Note
q Body Aluminum die-casted Platinum silver u Sub-plate Aluminum die-casted DXT192-14-1∗P Platinum silver
w Piston plate Resin Black i Solenoid assembly Epoxy/Stainless steel DXT170-C-
e Piston Resin Common with
o O-ring NBR 13 x 11 x 1
r Spool valve Aluminum, HNBR Series VZ 15 000
t End cover Resin ∗ Thread type
y Spool spring Stainless steel Nil: Rc
F: G
N: NPT
T : NPTF

3-3-33
Series VZ3000
2 Position Single

Grommet (G), (H) VZ3140

H -01
VZ3140- G

Manual override

(Mounting hole pitch)

(Mounting hole)
(Non-locking)

(Mounting hole pitch)

(Lead wire length)
G: 300 mm
H: 600 mm

(Piping port)

(PE port)
(Lead wire length)

L plug connector (L) M plug connector (M)

VZ3140-L-01 VZ3140-M-01
≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in speed controllers

VZ3140-D-01 VZ3150-
Applicable cable O.D.
ø3.5 to ø7

3-3-34
 5 Port Solenoid Valve
Base Mounted Series VZ3000
2 Position Double

VZ3240

Grommet (G), (H)

H-01
VZ3240-G

VK
VZ

(Mounting hole pitch)

Manual override (Mounting hole)
(Non-locking)

VF
VFR
(Mounting hole pitch)
VP4
(Lead wire length)

VZS
G: 300 mm
H: 600 mm

VFS
VS4
VQ7

(PE port)
EVS
VFN
(Piping port)

L plug connector (L) M plug connector (M)

VZ3240-L-01 VZ3240-M-01
(Lead wire length)

≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in speed controllers

VZ3240-D-01 VZ3250-

Applicable cable O.D. ø3.5 to ø7

3-3-35
Series VZ3000
3 Position Closed Center/Exhaust Center/Pressure Center

VZ3340
Grommet (G), (H)
3 G
VZ3 45 20-H-01

VZ3440

Manual override (Mounting hole)

(Non-locking)

(Mounting hole pitch)

VZ3540
(Lead wire length)

(Mounting hole pitch)

G: 300 mm
H: 600 mm

2-M5 x 0.8 (PE port)

4-Rc 1/8
(Piping port)

L plug connector (L) M plug connector (M)

3 3
VZ3 4 40-L-01 VZ3 4 40-M-01
5 5
(Lead wire length)

≅300
≅300

(Lead wire length)

: With light/surge voltage suppressor

DIN terminal (D) Built-in speed controllers

3 3
VZ3 45 40-D-01 VZ345 50-
Applicable cable O.D. MAX. 10
MAX. 11

ø3.5 to ø7

3-3-36
 Series VZ3000/Base Mounted
Manifold Specifications
Manifold Standard
Manifold Specifications
Model Type 40 Type 41 Type 42 Type 43
Manifold type Single base/B mount
P(SUP)/R(EXH) Common SUP/Common EXH
Valve stations 2 to 20 stations
4(A), 2(B) port Position Base Base
Porting specifications Direction Bottom Side
VK
1(P), 3/5(R) port Rc 1/8 Rc 1/4 Rc 1/8
Rc 1/8 One-touch
VZ
Port size C6
One-touch C4 fitting for ø4
4(A), 2(B) port M5 x 0.8 fitting for ø6
One-touch
B7
One-touch
fitting for 1/4"
B3 fitting for 5/32" VF
Flow Characteristics VFR
Port size Flow characteristics
Manifold 1(P), 5/3(R) 2(B), 4(A) 1
4/2 (P
A/B) 4/2
5/3 (A/B
R)
port port 3
C [dm /(s·bar)] b Cv C [dm3/(s·bar)] b Cv VP4
VV5Z3-40 1/8 M5 x 0.8 0.55 0.35 0.15 0.64 0.26 0.16
VV5Z3-41 1/8 M5 x 0.8 0.59 0.35 0.16 0.68 0.23 0.17
VV5Z3-42-01 VZ34 1/4 1/8 0.74 0.22 0.18 0.82 0.31 0.21 VZS
VV5Z3-42-C6 1/4 C6 0.71 0.24 0.17 0.80 0.29 0.20
VV5Z3-43 1/8 C4 0.55 0.29 0.14 0.74 0.32 0.19 VFS
Note) Value at manifold base mounted, 2 position single operating

VS4
How to Order Manifold
Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along VQ7
with the manifold base model no.
(Example) VV5Z3-40-031-M5······1 pc. (Manifold base)
∗VZ3140-5G-M5·········2 pcs. (Valve) EVS
∗DXT192-13-1A·········1 pc. (Blanking plate assembly)
VV5Z3-43-031-C4······1 pc. (Manifold base)
∗VZ3140-5LZ·············1 pc. (Valve)
VFN
∗VZ3240-5LZ·············1 pc. (Valve)
∗DXT192-13-1A·········1 pc. (Blanking plate assembly)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

Flat Ribbon Cable Manifold

Flat Ribbon Cable Manifold Specifications
• One-touch wiring to Model Type 41P Type 43P
Manifold type Single base/B mount
consolidate connection of P(SUP), R(EXH) Common SUP/Common EXH
external wires. Valve stations 3 to 12 stations
4(A), 2(B) port Position Base
• Clean appearance location Direction Side
The flat cable provides wiring on a 1(P), 3/5(R) port Rc 1/8 Rc 1/8
Port size
4(A), 2(B) port M5 x 0.8 C4 (One-touch fitting for ø4)
printed circuit board to the individual Socket: 26 pins MIL, with strain relief
valves at the manifold base, enabling Applicable flat ribbon cable connector
(Conforming to MIL-C-83503)
the consolidation of external wiring at Internal wiring +COM specifications (For –COM specifications, specify them separately.)
a touch through a 26 pins MIL 1 1
Applicable valve model VZ343- 35 MOZ-VZ353- 35 MOZ
connector. 6 6
Rated voltage 100 VAC 50/60 Hz, 110 VAC 50/60 Hz, 24 VDC, 12 VDC
Note) Withstand voltage specifications of wiring unit part is equivalent to JIS C 0704 class 1.

Flow Characteristics
Port size Flow characteristics
Manifold 1(P), 5/3(R) 2(B), 4(A) 1
4/2 (P
A/B) 4/2
5/3 (A/B
R)
port port C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv
VV5Z3-41P 1/8 M5 x 0.8 0.59 0.35 0.16 0.68 0.23 0.17
SYJ543
VV5Z3-43P 1/8 C4 0.59 0.29 0.14 0.74 0.32 0.19
Note) Value at manifold base mounted, 2 position single operating

How to Order Manifold

Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted
on the manifold along with the manifold base model no.
(Example) VV5Z3-43P-07-C4·····1 pc. (Manifold base)
∗VZ3143-5MOZ········ 3 pcs. (Valve)
∗VZ3243-5MOZ········ 3 pcs. (Valve)
∗DXT192-13-3A········ 1 pc. (Blanking plate assembly)
∗DXT192-52-1-4A····· 3 pcs. (Connector assembly)
∗DXT192-52-2-4A····· 3 pcs. (Connector assembly)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

3-3-37
Series VZ3000
Common SUP/Common EXH Note) For more than 8 stations, supply air to both sides of 1(P) port and exhaust air from both sides of 3/5(R) port.

Type 40 How to Order

1(P) port
Rc 1/8 VV5Z3 40 05 2 M5
Stations 4(A), 2(B) 1(P), 3/5(R)
3, 5(R) port 02 2 stations port size port thread type

···
···
4(A), 2(B) port Rc 1/8 M5 M5 x 0.8 Nil Rc
M5 x 0.8 20 20 stations F G
N NPT
Z NPTE

Type 41 How to Order

VV5Z3 41 05 1 M5
Stations 4(A), 2(B) 1(P), 3/5(R) Applicable solenoid
3/5(R) port 02 2 stations port size port thread type valve
G
···
···

Rc 1/8 M5 M5 x 0.8 Nil Rc

4(A), 2(B) port VZ34- LM 
20 20 stations F G D
M5 x 0.8 1(P) port G
N NPT
Rc 1/8 VZ35- LM 
Z NPTE D
Applicable blanking plate
Type 42 How to Order assembly
DXT192-13-1A
VV5Z3 42 05 1 C6 Applicable individual EXH
spacer assembly
DXT192-21-1A
Stations 4(A), 2(B) 1(P), 3/5(R) Applicable individual SUP
3/5(R) port 02 2 stations port size port thread type spacer assembly
Rc 1/4 Rc 1 8 Rc (Except VV5Z3-40 type)
···
···

01 Nil
4(A), 2(B) port DXT192-40-1A
1(P) port 20 20 stations C6 One-touch fitting for ø6 F G
Rc 1/8, C6 Applicable interface
Rc 1/4 B7 One-touch fitting for 1/4" N NPT
Z NPTE regulator
ARBZ3000-00-P

Type 43 How to Order

VV5Z3 43 05 1 C4
Stations 4(A), 2(B) 1(P), 3/5(R)
02 2 stations port size port thread type
3/5(R) port Nil Rc
···
···

C4 One-touch fitting for ø4

4(A), 2(B) port Rc 1/8 20 20 stations B3 One-touch fitting for 5/32" F G
1(P) port N NPT
Rc 1/8 Z NPTE

Flat ribbon cable type 41P How to Order

Applicable solenoid
VV5Z3 41P 05 M5 valve
1
VZ343- 35 MOZ
Stations 4(A), 2(B) 1(P), 3/5(R) 6
4(A), 2(B) port 1
03 3 stations port size port thread type VZ353- 35 MOZ
M5 x 0.8 6
···
···

M5 M5 x 0.8 Nil Rc
1(P) port 12 12 stations F G Applicable blanking plate
Rc 1/8 assembly
3/5(R) port N NPT
DXT192-13-3A
Rc 1/8 Z NPTE
Applicable connector
assembly
Flat ribbon cable type 43P How to Order DXT192-52-1-∗A
(For 2 position single)
VV5Z3 43P 05 C4 DXT192-52-2-∗A
(For 2 position double, 3
Stations position)
4(A), 2(B) 1(P), 3/5(R) ∗ 1: 100 VAC, 3: 110 VAC,
4(A), 2(B) port 03 3 stations port size port thread type 4: DC
···
···

C4 C4 One-touch fitting for ø4 Nil Rc For “How to order

1(P) port
12 12 stations B3 One-touch fitting for 5/32" F G applicable connector
Rc 1/8
N NPT assemblies”, refer to
3/5(R) port
page 3-3-7.
Rc 1/8 Z NPTE

3-3-38
 5 Port Solenoid Valve
Base Mounted Series VZ3000
DIN Rail Manifold
Manifold Specifications
Model Type 45 Type 45F
Manifold type Stacking type non plug-in type Stacking type plug-in type
P(SUP), R(EXH) Common SUP/Common EXH
Valve stations 2 to 20 stations
A, B port Location Base
Porting specifications Direction Side
1(P), 3/5(R) port C8 (One-touch fitting for ø8)
Port size C4 (One-touch fitting for ø4)
4(A), 2(B) port
C6 (One-touch fitting for ø6) VK
MIL-C-24308 Applicable for
Connector —
JIS-X-5101 D-sub connector
Internal wiring — COM Note) VZ
Note) It is available at +COM or –COM.
VF
Flow Characteristics VFR
Port size Flow characteristics
Manifold 1(P), 5/3(R) 2(B), 4(A) 1
4/2 (P
A/B) 4/2
5/3 (A/B
R) VP4
port port C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv
C8 C4 0.59 0.28 0.15 0.83 0.34 0.22
VV5Z3-45 VZ34
C8 C6 0.76 0.23 0.18 0.86 0.29 0.22
VZS
Note) Value at manifold base mounted, 2 position single operating
VFS
How to Order Manifold VS4
Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along
with the manifold base model no.
(Example) VV5Z3-45FD-06-C6C·· 1 pc. (Manifold base) VQ7
∗VZ3143-5FZ···············2 pcs. (Valve)
∗VZ3243-5FZ···············3 pcs. (Valve) EVS
∗VZ3000-69-1A ···········1 pc. (Blanking plate assembly)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.
DIN Rail Manifold VFN
Common SUP/Common EXH
Type 45 (Non plug-in type) How to Order Applicable solenoid
valve
VV5Z3 45 05 D C6 C VZ34- LM 
G

D
Stations G
02 2 stations 4(A), 2(B) VZ35- LM 
port size D
···
···

Applicable blanking plate

20 20 stations One-touch
C4 assembly
SUP/EXH block fitting for ø4
VZ3000-69-2A
mounting position C6
One-touch
U U side: 2 to 10 stations fitting for ø6
DIN rail length specified
D D side: 2 to 10 stations M∗ Mixed
Nil Standard length
B Both sides: 2 to 20 stations ∗ In the case of mixed
specifications (M), 3 For 3 stations (Specify a longer
M∗ Special specifications rail than the
···
···

indicate separately
∗ For special specifications, indicate separately on the manifold 20 For 20 stations standard length.)
by the manifold specification sheet. specification sheet.

Type 45F (Plug-in type) How to Order Applicable solenoid

valve
VV5Z3 45F D 05 C6 C VZ343-FZ
Applicable blanking plate
Connector assembly
mounting direction 4(A), 2(B) VZ3000-69-1A
U U side: 2 to 10 stations port size
D D side: 2 to 10 stations One-touch
C4
B Both sides: 11 to 20 stations fitting for ø4
Stations One-touch
C6
02 2 stations SUP/EXH block fitting for ø6
mounting position M∗ Mixed
···
···

20 20 stations For 2 to 10 stations : One side ∗ In the case of DIN rail length specified
mixed Nil Standard length
Nil (Same as direction of connector mount)
specifications (M),
For 11 to 20 stations: Both sides 3 For 3 stations (Specify a longer
indicate separately
rail than the
···
···

B For 2 to 10 stations: Both sides on the manifold

M∗ Special specifications specification sheet. 20 For 20 stations standard length.)
∗ For special specifications, indicate
separately by the manifold
specification sheet.

3-3-39
Series VZ3000
Option/Standard Manifold, Flat Ribbon Cable Manifold

Combinations of Solenoid Installation of the VZ300 Valve Blanking Plate Assembly

Valve, Manifold Gasket and on the VZ3000 Manifold DXT192-13-1A
Manifold Base • Use of an adaptor plate makes it possible
to mount Series VZ300 on the manifold Round head combination screw
Round head
base of Series VZ3000. M2.5 x 7 (With spring washer)
combination screw
• The mounting direction is shown in the
Blanking plate
diagram below. Mount the solenoid so that
(With spring washer)
it will be on the same side as the single
solenoid of the Series VZ3000. Gasket
• 2(A) port of 3 port valve should be 2(B)
port of manifold base.
Applicable base
VV5Z3-40
VV5Z3-41
Gasket
VV5Z3-42
DXT192-10-5 Adapter Plate Assembly VV5Z3-43
(Use caution to
the orientation.) DXT200-3-1A DXT192-13-3A Round head
Applicable base combination screw
VV5Z3-40 M2.5 x 7
Applicable base VV5Z3-41 (With spring washer)
VV5Z3-40 VV5Z3-42 Blanking plate
VV5Z3-41 VV5Z3-43
VV5Z3-42
VV5Z3-43
Series VZ300
VV5Z3-41P
Base mounted Gasket
VV5Z3-43P
Adapter plate assembly

Manifold gasket Round head

combination screw
Dust cap
Adapter plate

Corresponding
Adapter gasket
mark
Applicable base
VV5Z3-41P
VV5Z3-43P

Individual EXH Spacer Assembly Individual SUP Spacer Assembly Interface regulator (P port
DXT192-21-1A DXT192-40-1A regulation)
Interface regulator can be placed on top of
Applicable base Spring washer the manifold base to reduce the pressure of
Spring washer
VV5Z3-40 for M2.5 each of the valves.
VV5Z3-41 Round head
for M2.5
VV5Z3-42 combination
ARBZ3000-00-P
Round head screw
combination VV5Z3-43
screw Round head
combination
screw

(With spring
washer)

Gasket

Individual Gasket Applicable

Gasket SUP spacer base
VV5Z3-40
Individual EXH VV5Z3-41
spacer VV5Z3-42
Rc 1/8
Applicable base VV5Z3-43
(1(P) port)
VV5Z3-41
VV5Z3-42
VV5Z3-43
(5(R1), 3(R2)
port)
Before using, refer to page 3-3-8.
Note) Please contact SMC when using an individual EXH spacer
assembly, an individual SUP spacer assembly, an adapter plate
assembly, or an interface regulator on 41P and 43P types.
Caution
Mounting Screw Tightening Torques M2.5: 0.45 N·m
3-3-40
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Option/DIN Rail Manifold
Blanking Plate Assembly Combination of Solenoid Valve, Gasket and Manifold Base
VZ3000-69-2A
Round head Round head
combination screw combination screw
Round head combination screw

(With spring washer) (With spring washer) (With spring washer)

Blanking plate
VK

Gasket VZ

Applicable base
VF
Gasket Gasket
VV5Z3-45
DXT192-10-5
(Use caution to
DXT192-10-5
(Use caution to
VFR
the orientation.) the orientation.)
Applicable base
VP4
Applicable base
VV5Z3-45F
VV5Z3-45
VZS
VZ3000-69-1A
Round head
SUP Block Disk EXH Block Disk
VFS
combination screw
By installing a SUP block disk in the By installing an EXH block disk in the
(With spring washer) pressure supply passage of a manifold exhaust passage of a manifold valve, it is VS4
Blanking plate valve, it is possible to supply two or more possible to divide the valve’s exhaust so that
different high and low pressures to one it does not affect another valve. VQ7
manifold. VZ3000-79-1A
Gasket VZ3000-79-1A EVS
Dust cap
(Use caution to
the orientation.) VFN

Applicable Plug Assembly (D-sub connector cable assembly)

Cable length Assembly part no. Component parts
1.5 m VVZS3000-21A-1
Plug MIL standard
Applicable base 3m VVZS3000-21A-2
Number of terminals: 25
VV5Z3-45F 5m VVZS3000-21A-3 Cable: 25 cores x 0.3 mm2
8m VVZS3000-21A-4
For details, refer to page 3-3-8.
Caution
Mounting Screw Tightening Torques
M2.5: 0.32 N·m
(For stacking type manifold)

3-3-41
Series VZ3000
Exploded View/DIN Rail Manifold
Type 45 Manifold
r
w

U side r

q e

(b) Lever
(a) Bolt (Both sides)
e

(a) Bolt (Both sides)

Replacement Parts
No. Description Part no. Note
Manifold block C4 C4: A, B port with One-touch fitting for ø4 D side
q VZ3000-50A-2-C6
assembly C6: A, B port with One-touch fitting for ø6
w SUP/EXH block assembly VZ3000-51A-2 P/R port with One-touch fitting for ø8
e End block assembly VZ3000-52A-2D For D side DIN rail
r End block assembly VZ3000-52A-2U For U side

How to Increase Manifold Base Station expansion is possible at any position.

(1) Loosen (both) bolts (a), which are securing the manifold onto the
DIN rail, 1 to 2 turns.
(To remove the manifold base from the DIN rail, loosen the bolts 4 Fig. (1)
to 5 turns.)

(2) Press lever (b) to disconnect the manifold block assembly at the
location in which you wish to place an additional manifold block (a) Bolt (Both sides)
assembly. (However, there are no levers between q and r or
between w and r. They can be disconnected by merely pulling
them apart.)

(3) Mount additional manifold block assembly on the DIN rail as

shown in the Fig. (2).

(4) Press the block assemblies and tighten the bolts (a) to fix them to Fig. (2)
the DIN rail.
Note) When there are 10 or fewer manifold block assemblies,
and more are added to make a total of 11 or more, a
supply/exhaust block assembly must also be added.
Hook this part onto
the DIN rail, and press
down in the direction
of the arrow.

(b) Lever

3-3-42
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Exploded View/DIN Rail Manifold
Type 45F Manifold w
i
e

t VK
U side
q
VZ
y VF
VFR
VP4
Location of addition w
(a)
Bolt (Both sides)
VZS
VFS
r

Replacement Parts (b) Lever VS4

No. Description Part no. Note
q Manifold block assembly VZ3000-50A-1- C4
C6
C4: A, B port One-touch fitting for ø4 VQ7
C6: A, B port One-touch fitting for ø6 (a)
Bolt (Both sides)
w SUP/EXH block assembly VZ3000-51A-1D
For D side, With D-sub connector and
P/R port with One-touch fitting for ø8
EVS
For U side, With D-sub connector and D side
e SUP/EXH block assembly VZ3000-51A-1U
P/R port with One-touch fitting for ø8 VFN
DIN rail
r End block assembly VZ3000-52A-2D For D side, set with w
t End block assembly VZ3000-52A-1U For U side
y End block assembly VZ3000-52A-1D For D side
u End block assembly VZ3000-52A-2U For U side, set with e
Without D-sub connector
i SUP/EXH block assembly VZ3000-51A-1M
For indicated location

To add a manifold block assembly, add it to the U side so that the terminal number of the D-sub
How to Increase Manifold Base connector and the valve link position will be in accordance with the circuit diagram.

(1) Loosen (both) bolts (a), which are securing the manifold onto the Housing cover
DIN rail, 1 to 2 turns. Fig. (2) Hook this part onto
the DIN rail and
(To remove the manifold base from the DIN rail, loosen the bolts 4 press down until
to 5 turns.) a click is heard.

Terminal Lead
(2) Using a flat screwdriver, press lever (b) to disengage the link of no. wire color
the manifold block assembly on the U side or the D side from the Fig. (1) B side coil
1 station A side coil
Black
SUP/EXH block assembly or from the end block assembly. (11 stations) White
(However, there are no levers between t and q. They can be (b) Lever 2 station
B side coil
Black
Connector A side coil
disconnected by merely pulling them apart.) D-sub (12 stations) White
Black connector terminal no. B side coil
3 station Black
White (13 stations)
A side coil
(3) Remove the housing cover from the D-sub connector portion of White
B side coil
the SUP/EXH block assembly. (Refer to Fig. (1).) 4 station A side coil
Black
(14 stations) White
B side coil
(4) Following the procedure shown in Fig. (2), mount the manifold block 5 station
A side coil
Black
(15 stations) White
assembly to be added onto the DIN rail. As shown in Fig. (3), insert B side coil
the pin of the lead wire assembly into the D-sub connector, and Lead 6 station Black
A side coil
wire (16 stations) White
attach the round crimped terminal to the screw that connects the ass'y B side coil
wires. Hook 7 station Black
U side (17 stations)
A side coil
Pin White
B side coil
After inserting the pin, 8 station Black
(5) Press the block assemblies and tighten the bolts (a) to fix them to (18 stations) A side coil
lightly pull on the lead White
the DIN rail. wire to verify the lock. B side coil
9 station Black
A side coil
Note) When there are 10 or fewer manifold block assemblies, Stations (19 stations) White
Housing side D side B side coil
and more are added to make a total of 11 or more, a 10 station Black
A side coil
supply/exhaust block assembly must also be added. Fig. (3) How to insert lead ( ) is for the case of a (20 stations) White
wire assembly pin D-sub connector for Red
both sides (FB type).
Red

3-3-43
Series VZ3000
Type 40 Manifold: Bottom Ported
VV5Z3-40- Station 2-M5

Grommet (G), (H) (Pitch)

(Mounting hole)

6-Rc 1/8
(1(P), 3/5(R) port)

Manual override G: 300 mm

(Non-locking) H: 600 mm M5 x 0.8 (PE port)

(Lead wire length)

(4(A), 2(B) port)

(Pitch)

(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 58 74 90 106 122 138 154 170 186 202 218 234 250 266 282 298 314 330 316
L2 40 56 72 88 104 120 136 152 168 184 200 216 232 248 264 280 296 312 328

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers
MAX. 10

Applicable cable O.D. MAX. 11

≅300 ø3.5 to ø7
(Lead wire length)
(Lead wire length)
≅300

: With light/surge voltage suppressor

3-3-44
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Type 41 Manifold: Side Ported
VV5Z3-41- Station 1-M5
Manual override
Grommet (G), (H) (Non-locking)

M5 x 0.8 (PE port)

With filter

VK
VZ
VF
(Pitch)
(1(P), 3/5(R) port)
(Mounting hole) VFR
VP4
G: 300 mm
H: 600 mm VZS
(Lead wire length)
VFS
VS4
VQ7
EVS
VFN
(4(A), 2(B) port)
(Pitch)
(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 52 68 84 100 116 132 148 164 180 196 212 228 244 260 276 292 308 324 340
L2 43 59 75 91 107 123 139 155 171 187 203 219 235 251 267 283 299 315 331

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers
(Lead wire length)

MAX. 11
≅300

≅300
Applicable cable O.D.
(Lead wire length)
MAX. 10

ø3.5 to ø7

: With light/surge voltage suppressor

3-3-45
Series VZ3000
Type 42 Manifold: Side Ported

VV5Z3-42- Station 1-01

Manual override
Grommet (G), (H) (Non-locking)

M5 x 0.8 (PE port)

(Pitch)
(Mounting hole) 4-Rc 1/4
(1(P), 3/5(R) port)

G: 300 mm
H: 600 mm
(Lead wire length)

2n-Rc 1/8
(4(A), 2(B) port) (Pitch) 24.5
P=17
(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 66 83 100 117 134 151 168 185 202 219 236 253 270 287 304 321 338 355 372
L2 53 70 87 104 121 138 155 172 189 206 223 240 257 274 291 308 325 342 359

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers
(Lead wire length)

MAX. 11
≅300

≅300
(Lead wire length) Applicable cable O.D.
MAX. 10

ø3.5 to ø7

: With light/surge voltage suppressor

3-3-46
 5 Port Solenoid Valve
Base Mounted Series VZ3000

Type 42 Manifold: Side Ported

VV5Z3-42- Station 1-C6

Manual override
(Non-locking)
Grommet (G), (H) M5 x 0.8 (PE port)

(One-touch fitting)
VK

MAX. 5.5
VZ
VF
(Pitch)
(Mounting hole) 4-Rc 1/4 VFR
(1(P), 3/5(R) port)
VP4
G: 300 mm
H: 600 mm
VZS
(Lead wire length)
VFS
VS4
VQ7
EVS
VFN
2n-One-touch fitting
(4(A), 2(B) port) Applicable tubing model: T0604

(Pitch)
(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 65 81 97 113 129 145 161 177 193 209 225 241 257 273 289 305 321 337 353
L2 52 68 84 100 116 132 148 164 180 196 212 228 244 260 276 292 308 324 340

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers
(Lead wire length)

MAX. 11
≅300

≅300
Applicable cable O.D.
MAX. 10

(Lead wire length) ø3.5 to ø7

: With light/surge voltage suppressor

3-3-47
Series VZ3000
Type 43 Manifold: Side Ported

VV5Z3-43- Station 1-C4

Manual override
(Non-locking)
Grommet (G), (H)

(PE port)

(Pitch)
(Mounting hole)

4-Rc 1/8
(1(P), 3/5(R) port)
G: 300 mm
H: 600 mm
(Lead wire length)

2n-One-touch fitting
(4(A), 2(B) port) (Pitch)
Applicable tubing model: T0425
(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 52 68 84 100 116 132 148 164 180 196 212 228 244 260 276 292 308 324 340
L2 43 59 75 91 107 123 139 155 171 187 203 219 235 251 267 283 299 315 331

L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers
(Lead wire length)
≅300

MAX. 11

≅300
(Lead wire length)
MAX. 10

Applicable cable O.D.

ø3.5 to ø7

: With light/surge voltage suppressor

3-3-48
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Type 41P Flat Ribbon Cable Manifold: Side Ported

VV5Z3-41P- Station -M5

2n-M5 x 0.8 (Pitch)

(4(A), 2(B) port)

VK
VZ
(Light/Surge voltage suppressor)
VF
A side
VFR
(Pitch)
VP4
VZS
VFS
VS4
4-Rc 1/8
(1(P), 3/5(R) port)
VQ7
(Mounting hole) Triangle mark
B side EVS
Manual override
(Non-locking)
(Station n)···················(Station 1) VFN

Connector polarity indicator Applicable connector: 26 pins MIL

(Conforming to MIL-C-83503)

(mm)
Built-in speed controllers Stations 3 4 5 6 7 8 9 10 11 12
L1 77 94.5 112 129.5 147 164.5 182 199.5 217 234.5
L2 62 79.5 97 114.5 132 149.5 167 184.5 202 219.5

3-3-49
Series VZ3000
Type 43P Flat Ribbon Cable Manifold: Side Ported

VV5Z3-43P- Station -C4

2n-One-touch fitting (Pitch)

(4(A), 2(B) port)
Applicable tubing model: T0425

(Light/Surge voltage suppressor)

A side

(Pitch)

MAX. 5
4-Rc 1/8
Triangle mark (1(P), 3/5(R) port)
2-ø5.5
(Mounting hole)
Manual override B side
(Non-locking)

(mm)
Built-in speed controllers Stations 3 4 5 6 7 8 9 10 11 12
L1 77 94.5 112 129.5 147 164.5 182 199.5 217 234.5
L2 62 79.5 97 114.5 132 149.5 167 184.5 202 219.5

MAX. 11

3-3-50
 5 Port Solenoid Valve
Base Mounted Series VZ3000
Type 45 DIN Rail Manifold (Non Plug-in): Side Ported

VV5Z3-45- Station D- C4C

C6C
C4C
Grommet (G), (H) C4 VV5Z3-45- Station B-
2n-One-touch
C6C
fitting (Pitch) (Pitch)
2n-One-touch fitting
(Pitch) (A, B port)
(A, B port) Applicable tubing model
Applicable tubing model C4: T0425
C6: T0604 VK
VZ
One-touch fitting port (P, R port)
Applicable tubing model: T0806
VF
VFR
U side VP4
D side VZS
DIN rail VFS
DIN rail Manual
override VS4
holding screw (Non-locking) G: 300
H: 600
(Rail mounting hole pitch 12.5) (Lead wire length) (mm) VQ7
Stations 2 3 4 5 6 7 8 9 10
L1 135.5 148 160.5 185.5 198 210.5 223 248 260.5 EVS
(Station n)··············(Station 1) L2 125 137.5 150 175 187.5 200 212.5 237.5 250
L3 104 120 136 152 168 184 200 216 232 VFN
L4 16 14 12.5 17 15 13.5 11.5 16 14 (mm)
Stations 11 12 13 14 15 16 17 18 19 20
L1 273 298 310.5 323 335.5 360.5 373 385.5 398 423
L2 262.5 287.5 300 312.5 325 350 362.5 375 387.5 412.5
Separation L3 248 264 280 296 312 328 344 360 376 392
lever L4 12.5 17 15.5 13.5 12 16.5 14.5 13 11 15.5
(Push type)
(mm)
Stations 2 3 4 5 6 7 8 9 10 VV5Z3-45- Station U- C4C
C6C
L1 110.5 135.5 148 160.5 185.5 198 210.5 223 248
L2 100 125 137.5 150 175 187.5 200 212.5 237.5
L3 88 104 120 136 152 168 184 200 216
L4 11.5 16 14 12.5 17 15 13.5 11.5 16 (Pitch)

L plug connector (L) M plug connector (M) DIN terminal (D)

(Lead wire length)

MAX. 10
≅300

≅300
(Lead wire length)

Applicable cable O.D. ø3.5 to ø7

(mm)
Stations 2 3 4 5 6 7 8 9 10
L1 110.5 135.5 148 160.5 185.5 198 210.5 223 248
L2 100 125 137.5 150 175 187.5 200 212.5 237.5
L3 88 104 120 136 152 168 184 200 216
: With light/surge voltage suppressor L4 11.5 16 14 12.5 17 15 13.5 11.5 16

3-3-51
Series VZ3000
Type 45F DIN Rail Manifold (Non Plug-in): Side Ported

VV5Z3-45FD- Station - C4C

C6C C4
2n-One-touch fitting (A, B port) (Pitch) 2n-One-touch fitting (Pitch)
Applicable tubing model (A, B port)
C6: T0604 Applicable tubing model
C4: T0425

One-touch fitting port (P, R port)

Applicable tubing model: T0806

U side D side

DIN rail
DIN rail
holding screw
Manual
JIS-X-5101
override
(Non-locking)
Terminal no. 1
∗ Applicable connector D-SUB MIL-C-24308{ }
(Rail mounting hole pitch 12.5)

(Station n)············(Station 1) D side connector

(mm)
Stations 2 3 4 5 6 7 8 9 10
L1 110.5 135.5 148 160.5 185.5 198 210.5 223 248
L2 100 125 137.5 150 175 187.5 200 212.5 237.5
L3 88 104 120 136 152 168 184 200 216
L4 11.5 16 14 12.5 17 15 13.5 11.5 16
Separation lever C4C
(Push type) VV5Z3-45FU
D- Station B-C6C (2 to 10 stations)

VV5Z3-45FB- Station - C4C

C6C (11 to 20 stations)
VV5Z3-45FU- Station - C4C
C6C (Pitch)

(Pitch)

(mm)
Stations 2 3 4 5 6 7 8 9 10
L1 135.5 148 160.5 185.5 198 210.5 223 248 260.5
L2 125 137.5 150 175 187.5 200 212.5 237.5 250
L3 104 120 136 152 168 184 200 216 232
(mm) L4 16 14 12.5 17 15 13.5 11.5 16 14 (mm)
Stations 2 3 4 5 6 7 8 9 10 Stations 11 12 13 14 15 16 17 18 19 20
L1 110.5 135.5 148 160.5 185.5 198 210.5 223 248 L1 273 298 310.5 323 335.5 360.5 373 385.5 398 423
L2 100 125 137.5 150 175 187.5 200 212.5 237.5 L2 262.5 287.5 300 312.5 325 350 362.5 375 387.5 412.5
L3 88 104 120 136 152 168 184 200 216 L3 248 264 280 296 312 328 344 360 376 392
L4 11.5 16 14 12.5 17 15 13.5 11.5 16 L4 12.5 17 15.5 13.5 12 16.5 14.5 13 11 15.5

3-3-52
 Series VZ
Made to Order Specifications:
Please contact SMC for detailed specifications, dimensions, and delivery.

1. Solenoid Valve: External Pilot Specifications

Applicable solenoid valve series
VZ3000/5000
(Non plug-in type only)
VK
Model no.
VZ
VZ 35 0 ( ) X20 VF
VFR
Entry is the same as standard products.
VP4
VZS
Specifications
Operating pressure Main pressure –100 kPa to 0.7 VFS
range (MPa) External pilot pressure 0.15 to 0.7
Pilot exhaust method Pilot valve individual exhaust VS4
Dimensions VQ7
VZ3000: 8 mm longer
VZ5000: 8 mm longer
EVS
JIS Symbol VFN
Body ported
2 position single 3 position closed center

2 position double 3 position exhaust center

3 position pressure center

3-3-85
 Series VZ
Made to Order Specifications:
Please contact SMC for detailed specifications, dimensions, and delivery.

2. Solenoid Valve: Special Manual Override 3. Solenoid Valve: Opposite Mount of Solenoid Assembly
Applicable solenoid valve series Applicable solenoid valve series
VZ3000 VZ1000/3000/5000
(Non plug-in type only) (Non plug-in type only)

Model no. Model no.

1
VZ3 A
A ( ) VZ 35 ( ) X1

Entry is the same Manual override Entry is the same as standard products.
as standard products. A Push type A
E Push-locking type E

Dimensions: Single Dimensions: VZ1120-G-M5-X1

Push type A

Manual override
(Push type A)
Manual override
(Non-locking)

(Mounting hole
for manifold)

Push-locking type E

(Piping port)

Manual override (Push-locking type E)

( )
Pressing makes the valve operate. The valve
can be locked in the manual override position by
turning it to the direction that the arrow shows
while keeping it pressed. If it is not turned, it can
be used as a non-locking push type.

Caution
When operating the lock
with the driver, use a
watchmakers’ screwdriver
and turn lightly.
(Torque: 0.1 N·m or less)

Note) Because the manual override unit protrudes, the manual

override could activate unintentionally if the protrusion is
touched or an object falls on it. Therefore, take the proper
preventative measures.

3-3-86
 Series VZ
Made to Order Specifications:
Please contact SMC for detailed specifications, dimensions, and delivery.

4. Manifold: Common SUP/Individual EXH Type

Applicable solenoid valve series
VZ3000
VK
Common SUP/Individual EXH type
VV5Z3-21-3
VZ
Specification Model no. Applicable solenoid valve VF
G
Common SUP/Individual EXH type VZ32- LM - M5
1(P) port Rc 1 8 VV5Z3 21 05 3 D
C4
C6 VFR
3/5(R) port M5 x 0.8 Applicable blanking plate
Stations
4(A), 2(B) port Valve
02 2 stations
P port assembly
DXT192-13-1A
VP4
thread type

···
··· Nil Rc Applicable throttle valve VZS
20 20 stations
00F G DXT154-34-1A
00N NPT Applicable silencer
00T NPTF AN120-M5
VFS
Note) Refer to page 3-3-25
for manifold option. VS4
Dimensions: Grommet Type VQ7
Note) To use the VZ323 with a throttle valve mounted on it, open the throttle valve one turn or more from the fully closed position.
(Pitch)
EVS
Manual override
(Non-locking) M5 x 0.8 (PE port)
VFN
4-ø4.5
Mounting hole
2-Rc 1/8
(1(P) port)
(4(A), 2(B) port)

≅300
(Lead wire length)

(Pitch)

(5(R1), 3(R2) port)

(mm)
Stations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
L1 50 66 82 98 114 130 146 162 178 194 210 226 242 258 274 290 306 322 338
L2 40 56 72 88 104 120 136 152 168 184 200 216 232 248 264 280 296 312 328

3-3-87