Scribd
Upload
2K views

Questions To Probe The Candidate's Underpinning Knowledge Satisfactory Response Extension/Reflection Questions Yes No

This document contains a questionnaire to assess a candidate's knowledge for the role of a driver. It includes 20 questions across several categories: extension/reflection questions, safety questions, contingency questions, job role/environment questions, and rules and regulations. The questions probe the candidate's understanding of vehicle checks, use of tools and equipment, safety procedures, emergency situations, responsibilities, and workplace policies. A satisfactory response is expected for each question to demonstrate the candidate possesses the necessary underpinning knowledge for the job.

Uploaded by

Daniel Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views

Questions To Probe The Candidate's Underpinning Knowledge Satisfactory Response Extension/Reflection Questions Yes No

This document contains a questionnaire to assess a candidate's knowledge for the role of a driver. It includes 20 questions across several categories: extension/reflection questions, safety questions, contingency questions, job role/environment questions, and rules and regulations. The questions probe the candidate's understanding of vehicle checks, use of tools and equipment, safety procedures, emergency situations, responsibilities, and workplace policies. A satisfactory response is expected for each question to demonstrate the candidate possesses the necessary underpinning knowledge for the job.

Uploaded by

Daniel Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

QUESTIONING TOOL

Satisfactory
Questions to probe the candidate’s underpinning knowledge
response
Extension/Reflection Questions Yes No
1. What would you do if you do not know how to read and
interpret instructions in the manuals?  

2. What are the common hand tools?  


3. What would you do if you have weak battery?  
4. What are the things that we need to check before driving a
vehicle?  
Safety Questions
5. Should you check the vehicle before operation?  
6. Why should you wear personal protective equipment (PPE)?  
7. What is the importance of service manual?  
8. Did you use hydraulic jack and jack stand when you work  
under the vehicle?
Contingency Questions
9. What would you do if your temperature gauge rising up but  
your engine is cold?
10. How can you check a misfire with-out testing tools?  
11. What would you do if you have a noisy and hard steering  
wheel every time you make a turn?
12. How can you manage if you have no horn while you are  
driving?
Job Role/Environment Questions  
13. What would you do if your supervisor asked you to do the  
job but you are not yet competent?
14. Are you willing to work with your co-trainee even he /she is  
lack of knowledge to make the job?
15. How to approach to your co-trainee that you need an  
assistance?
16. What would you do after using the tools that you had  
borrowed to your co-trainee?
Rules and Regulations  
17. Is it allowed to bring foods and drinks to the working area?  

Driving NC II Date Developed: Document No. 001


October, 2020 Issued by:
QUESTIONING TOOL Developed by: Page 1 of
PGT-TCLASS
Archimedes R. Pineda 4
Plan Training Facilities
18. Are you allowed to bring home the tools and equipment  
when you leave?
19. How to dispose the used oil and grease?  
20. Is it allowed to work overtime without the permission of  
your supervisor?
The candidate’s underpinning  Satisfactory  Not
knowledge was: Satisfactory

Driving NC II Date Developed: Document No. 001


October, 2020 Issued by:
QUESTIONING TOOL Developed by: Page 2 of
PGT-TCLASS
Archimedes R. Pineda 4
Plan Training Facilities
QUESTIONING TOOL (Model Answer)
Satisfactory
Questions to probe the candidate’s underpinning knowledge
response
Extension/Reflection Questions Yes No
1. I would ask my supervisor for assistance.  
2. Screwdriver, pliers, tire gauge, battery tester  
3. Check and charge battery.  
4. Check the battery, lights , oil , water , brakes , air and fuel.  
Safety Questions
5. Yes, to avoid accidents and loss of operational time.  
6. To protect against health or safety risks at work.  
7. To avoid damage to any workplace property or vehicle.  
8. Yes, to avoid accident causing injury.  
Contingency Questions
9. Check the circuit of coolant temperature for short to ground.  
10. Through cylinder drop test by removing high tension cable  
per cylinder.
11. Check and add fluid that specified for power steering.  
12. Drive carefully with patience and avoid tailgating.  
Job Role/Environment Questions  
13. I would tell my supervisor that I am not yet competent to do  
the job but I am willing to undergo training if given a chance.
14. Yes, I will share my knowledge so that he/she become  
competent to do the job
15. I will greet him/her first and ask him/her if she/he is busy  
and ask his /her assistance.
16. I will clean as before I use it and return to him with thank  
you.
Rules and Regulations  
17. Foods and drinks are not allowed to avoid any disturbance  
to worker and delaying of work.
18. It is prohibited to bring any property of the company or  
shop.
19. Keep your used oil to approved container, leak free and  
store in cool dry place, away from heat and sunlight.

Driving NC II Date Developed: Document No. 001


October, 2020 Issued by:
QUESTIONING TOOL Developed by: Page 3 of
PGT-TCLASS
Archimedes R. Pineda 4
Plan Training Facilities
20. It is not allowed to work with-out permission to your  
supervisor, it is considered as volunteer.
The candidate’s underpinning  Satisfactory  Not
knowledge was: Satisfactory

Driving NC II Date Developed: Document No. 001


October, 2020 Issued by:
QUESTIONING TOOL Developed by: Page 4 of
PGT-TCLASS
Archimedes R. Pineda 4
Plan Training Facilities

You might also like