Formulation

Name CONDITIONING HAND SOAP

No. 371
Description This hand soap provides both cleansing and softening properties.
Formulation INGREDIENTS: % by Weight

=== Phase 1 ===

Deionized Water q.s. to 100.0
BIO-TERGE® AS-40 (or BIO-TERGE® AS-40 HP) 23.30
AMMONYX® MO 5.00
NINOL® 96-SL 3.50
AMPHOSOL® CA 1.00
Merquat 550 (ONDEO Nalco) Polyquaternium-7 0.25

=== Phase 2 ===

Citric Acid q.s.
Fragrance, Dye, & Preservative q.s.
Sodium Chloride q.s.
___________
Total 100.0
Procedure 1. Add ingredients of Phase I, heat to 60ºC, blend until homogeneous.
2. Adjust pH to 6.0-7.0 with Citric Acid.
3. Add Fragrance, Dye, and Preservative, if desired.
4. Adjust to desired viscosity with Sodium Chloride.
*Note: When formulating with BIO-TERGE® AS-40 HP, a greater amount of Citric Acid may be needed
to adjust the pH within the recommended range as noted, than when formulating with BIO-TERGE®
AS-40.
Physical Appearance Clear yellow liquid
Properties pH 6.0-7.0
Viscosity Profile, cps
as is 1,000
0.5% sodium chloride 13,300
1.0% sodium chloride 25,300
Storage/ Freeze thaw Stable
Stability Elevated heat Stable
External Marketing Notes: AMPHOSOL® HCA-HP may be a potential substitute for AMPHOSOL® CA. It
Comment should be noted that stability testing using this AMPHOSOL® HCA-HP has not been completed on this
formulation, and in addition to the pH adjustment taking a greater amount of Citric Acid, the substitution
may also yield slightly different physical properties.
Registered BIO-TERGE®
Trademarks AMMONYX®
of Stepan AMPHOSOL®
Company NINOL®
For applications or product handling assistance, call our Technical Service Department at 1-800-745-7837 (U.S.) or
For
011-334-76-505-100 (Europe).
Additional For ordering assistance, call our Account Service Department at 1-800-457-7673.
Assistance
The information contained herein is based on the manufacturer’s own study and the works of others and is subject to change
without prior notice. The information is not intended to be all-inclusive, including as to the manner and conditions of use, handling,
storage or disposal or other factors that may involve additional legal, environmental, safety or performance considerations.
Nothing contained herein grants or extends a license, express or implied, in connection with any patents issued or pending of the
manufacturer or others, or shall be construed as a recommendation to infringe any patents. STEPAN COMPANY MAKES NO
PRODUCT WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR USE, EXPRESS OR IMPLIED, AND
NO OTHER WARRANTY OR GUARANTY, EXPRESS OR IMPLIED, IS MADE, INCLUDING AS TO INFORMATION
REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY, ACCURACY, COMPLETENESS, OR ADEQUACY. Stepan
Company (and its employees, subsidiaries and affiliates) shall not be liable (regardless of fault) to the vendee, its employees, or
any other party for any direct, indirect, special or consequential damages arising out of or in connection with the accuracy,
completeness, adequacy, furnishing, use, or reliance upon information provided herein. The vendee assumes and releases
Stepan Company (and its employees, subsidiaries and affiliates) from all liability, whether in tort, contract or otherwise to the
fullest extent possible under the relevant law.

Stepan
Stepan Company
Northfield, Illinois 60093
Telephone (847) 446-7500
Revision Date: 12/18/2019 Publication Date: © 2019, Stepan Company. All rights reserved.