Scribd
Upload
153 views3 pages

Enabling Assessment 2 - T-CEET325 - TO1 Abitona CEE31&ESE31 2S AY 20-21 - DLSU-D College - GS

This document appears to be a quiz on concepts related to reinforced concrete design. It contains 15 multiple choice questions testing understanding of topics like flexural analysis assumptions, stress-strain relationships in reinforced concrete, types of beam reinforcement, and definitions of symbols commonly used. The quiz is completed and ready for grading.

Uploaded by

Lotis Kee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views3 pages

Enabling Assessment 2 - T-CEET325 - TO1 Abitona CEE31&ESE31 2S AY 20-21 - DLSU-D College - GS

This document appears to be a quiz on concepts related to reinforced concrete design. It contains 15 multiple choice questions testing understanding of topics like flexural analysis assumptions, stress-strain relationships in reinforced concrete, types of beam reinforcement, and definitions of symbols commonly used. The quiz is completed and ready for grading.

Uploaded by

Lotis Kee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

4/25/2021 Enabling Assessment 2 - T-CEET325/TO1 Abitona CEE31&ESE31 2S AY 20-21 - DLSU-D College/GS

T-CEET325/TO1 Abitona CEE31&ESE31 2S AY 20-21


Enabling Assessment 2

https://dlsud.edu20.org/student_take_quiz_assignment/display/21555364?part=16&results=242554590 1/3
4/25/2021 Enabling Assessment 2 - T-CEET325/TO1 Abitona CEE31&ESE31 2S AY 20-21 - DLSU-D College/GS

End of quiz
You are at the end; press Finished to complete and grade the quiz.
You can review your answers below and click Edit if you want to change any.

Finished

Question 1
This assumption on flexure analysis on beams implies a perfect bond between the concrete and the steel, as both must act together to carry load. Which is it?

Response: all of these

Question 2
The moment reduction factor ranges from 0.65 to 0.9.

Response: True

Question 3
Whicn of the following relationship in strains is true with under reinforced beam?

Response: εs > εy

Question 4
Which among the following statements are not true?

Response: a is always greater than c

Response: In the analysis of the stress block, the curved stress diagram is replaced with a rectangular diagram with a constant stress of 75 percent of fc'

Response: Stress, like strain always vary directly as the distance from the neutral axis or as a straight line.

Question 5
Match the symbols/notations with their correct description/definition.

Response: β1 => factor relating depth of equivalent rectangular compressive stress block to depth of neutral axis
Response: εcu => maximum usable strain at extreme concrete compression fiber
Response: εy => net tensile strain in extreme layer of longitudinal tension reinforement
Response: d => Distance from extreme compression fiber to centroid of longitudinal tension reinforcement
Question 6
_____ rectangular beams are those which comprise of reinforcement both in the tension and compression zone.

Response: Doubly reinforced

Question 7
Where the beam is subjected to a positive bending, the lower fibers from the neutral axis of a rectangular beams cross section is subjected to compression.

Response: False

Question 8
Which among the following equations/relationships are never/not correct?

Response: C = 0.85fc' bd
Response: Mu ≥ øMn

https://dlsud.edu20.org/student_take_quiz_assignment/display/21555364?part=16&results=242554590 2/3
4/25/2021 Enabling Assessment 2 - T-CEET325/TO1 Abitona CEE31&ESE31 2S AY 20-21 - DLSU-D College/GS

Response:

Question 9
In this stage of beam failure, the strains are small, and the moment-curvature diagram is nearly vertical and very close to a straight line. Which stage is it?

Response: uncracked stage

Question 10
The under reinforced type of beam is generally adopted when due to head room consideration or architectural consideration, the depth (or size) of beam is restricted
and can not therefore develop the compression force required to resist the given bending moment, hence there is a need to reinforce it for compression.

Response: False

Question 11
Transformed area analysis or transformed area (or section) method is used when the section is said to be homogeneous, i.e., made of 2 or more materials with different
moduli of elasticity.

Response: False

Question 12
Match the symbols/notations with their correct description/definition.

Response: Ec => modulus of elasticity of concrete


Response: fc' => specified compressive strength of concrete
Response: fs => tensile stress in reinforcement at service loads
Response: fy => specified yield strength of non-prestressed reinforcement

Question 13
Whicn of the following relationship in strains is true with over reinforced beam?

Response: εs < εy

Question 14
Match the symbol/notation with the correct definition/description.

Response: As => area of non prestressed longitudinal tension reinforcement

Response: c => distance from extreme compression fiber of the beam to the neutral axis

Response: Mn => nominal flexural strength at section

Response: n => modular ratio of elasticity

Question 15
The ratio of the steel modulus to the concrete modulus is called the _____ .

Response: modular ratio

https://dlsud.edu20.org/student_take_quiz_assignment/display/21555364?part=16&results=242554590 3/3

You might also like