CITYSCAPE DISPLAY Set Safe Mode 9

GENERAL Set Cautious Mode 0

Pause on/off z Set Aggressive Mode -
Time Controls 0, 1, 2, 3, 4, 5 Crawling 2
Switch Map View t Walking 3
Options O Running 4
UFOpaedia 1 Don’t Fire 5
Scroll W, A, S, Z Aimed-Shot 6
Quit Game q Snap-Shot 7 ®
VEHICLE ORDERS Auto-Shot 8
Go To Building s + LMB Kneel B
Attack Vehicle a + LMB Message History M
Center on Message h
SETTING DESTINATIONS
Select Squad 1, 2, 3, 4, 5, 6
Cancel q
Assign Selected Units to Squad
Add Waypoint c + LMB
c + 1, 2, 3, 4, 5, 6
MANUAL CONTROL (VEHICLES) Abort mission q
Activate Manual Control M
‘HAND’ AREA
Cancel q
Equip Unit Screen e
Increase Speed U
Decrease Speed Y Throw (left hand) [ ™
Increase Altitude (flying vehicles) h Throw (right hand) ]
Decrease Altitude (flying vehicles) j Drop (left hand) '
U-Turn (road vehicles) h Drop (right hand) \
Overtake (road vehicles) j PRIME GRENADE WINDOW
Set Direction RMB Accept Settings Y
Fire Weapon LMB Cancel N
MESSAGE PANEL REAL-TIME ONLY
Continue q Pause on/off z
Center On e
TURN-BASED ONLY
Toggle Message on/off z
End Turn E
TACTICAL GAME LOADING AND SAVING
GENERAL Saving A Game S
Switch Map View t Loading A Game L
Up Level Arrow U
Down Level Arrow Y GAME SCREENS
Toggle Map Level Display V OK/Cancel e/q
Switch Camera Mode C Scroll Bars W, A, S, Z

0-517-47-202
6-97
 Introduction

iv
p. 1
p.
 Introduction

From 2041, after the initial recruitment in 2040, the second Alien war was waged under the
®
X-COM BACKGROUND seas and oceans of the world. The war came to its climax in the battle at the Alien city of
T’leth. Buried underwater for 65 million years, the city had the ability to destroy the Earth.
Fortunately, we discovered that Alien society was constructed like that of the bees and after
Dear Section Commander
killing the Alien Queen, everything else disintegrated.
Welcome to X-COM (Extraterrestrial Combat unit). You are now part of a tradition that spans
T’leth rose from the water only to self-destruct, a sight I don’t think any present at that time
back to the late 1990s. Let me apprise you of X-COM’s activities to date and, more
will forget. Since then we have had few recorded encounters. X-COM and Marsec, however,
importantly, the activities of the Aliens we have encountered.
were enlisted in the late 2060s to fight a territorial war against Aliens in the newly established
deep space mining colonies. This conflict left Earth uncontaminated… that was until a short
Back in the mid-1990s, it became evident that “we were not alone.” By 1998, UFOs began to
while ago, when the first Dimension-Gate appeared, right here in Mega-Primus.
land openly in rural areas; the aim of these early missions was the abduction of local
inhabitants and animals. Our first military contact with the Aliens led to the massacre of an
The last war has indeed proven to be an expensive victory. The contamination of Earth’s
entire squad. In November of that year, an emergency meeting was convened at the United
atmosphere and the devastating climactic changes that ensued have affected everyone. While
Nations. As a result of that meeting, X-COM was established. In the following years, X-COM
many sought to leave Earth and colonize other planets, a self-sufficient, self-contained city
waged war against the Alien menace. Most of this activity occurred in the cities and rural
was successfully constructed here on Earth and thrived under the hazardous toxic
areas of Earth, but eventually it took us to the Aliens’ main Base on Mars (Cydonia).
atmosphere that surrounded our home world. Mega-Primus has already become an important
historical achievement.
Our victory at Cydonia saw the defeat of the immediate Alien threat, but in its turn
reawakened a second wave of destruction that X-COM was later enlisted to counter.
Unfortunately, the last four years have seen this comfortable, low-cost lifestyle rapidly
deteriorate. The social and physical fabric of our society has decayed at an alarming rate;
Alien activity began once more in 2039. X-COM had only a nominal existence at this time;
sociologists have been, as yet, unable to explain the cause of decay. Statistics clearly
most of our Bases were decommissioned or converted into Theme Parks. The call for the
demonstrate increases in physical and cyberspace violence, family breakdowns, crime, ethnic
reinstitution of X-COM was led by the media after numerous ship and aircraft losses at sea.
unrest and strange cult group involvement.
Years of recession and political feuding meant that funding from the world’s governments
was not forthcoming; we had to raise the money by alternative corporate means.

2
p. 3
p.
 Introduction

From 2041, after the initial recruitment in 2040, the second Alien war was waged under the
®
X-COM BACKGROUND seas and oceans of the world. The war came to its climax in the battle at the Alien city of
T’leth. Buried underwater for 65 million years, the city had the ability to destroy the Earth.
Fortunately, we discovered that Alien society was constructed like that of the bees and after
Dear Section Commander
killing the Alien Queen, everything else disintegrated.
Welcome to X-COM (Extraterrestrial Combat unit). You are now part of a tradition that spans
T’leth rose from the water only to self-destruct, a sight I don’t think any present at that time
back to the late 1990s. Let me apprise you of X-COM’s activities to date and, more
will forget. Since then we have had few recorded encounters. X-COM and Marsec, however,
importantly, the activities of the Aliens we have encountered.
were enlisted in the late 2060s to fight a territorial war against Aliens in the newly established
deep space mining colonies. This conflict left Earth uncontaminated… that was until a short
Back in the mid-1990s, it became evident that “we were not alone.” By 1998, UFOs began to
while ago, when the first Dimension-Gate appeared, right here in Mega-Primus.
land openly in rural areas; the aim of these early missions was the abduction of local
inhabitants and animals. Our first military contact with the Aliens led to the massacre of an
The last war has indeed proven to be an expensive victory. The contamination of Earth’s
entire squad. In November of that year, an emergency meeting was convened at the United
atmosphere and the devastating climactic changes that ensued have affected everyone. While
Nations. As a result of that meeting, X-COM was established. In the following years, X-COM
many sought to leave Earth and colonize other planets, a self-sufficient, self-contained city
waged war against the Alien menace. Most of this activity occurred in the cities and rural
was successfully constructed here on Earth and thrived under the hazardous toxic
areas of Earth, but eventually it took us to the Aliens’ main Base on Mars (Cydonia).
atmosphere that surrounded our home world. Mega-Primus has already become an important
historical achievement.
Our victory at Cydonia saw the defeat of the immediate Alien threat, but in its turn
reawakened a second wave of destruction that X-COM was later enlisted to counter.
Unfortunately, the last four years have seen this comfortable, low-cost lifestyle rapidly
deteriorate. The social and physical fabric of our society has decayed at an alarming rate;
Alien activity began once more in 2039. X-COM had only a nominal existence at this time;
sociologists have been, as yet, unable to explain the cause of decay. Statistics clearly
most of our Bases were decommissioned or converted into Theme Parks. The call for the
demonstrate increases in physical and cyberspace violence, family breakdowns, crime, ethnic
reinstitution of X-COM was led by the media after numerous ship and aircraft losses at sea.
unrest and strange cult group involvement.
Years of recession and political feuding meant that funding from the world’s governments
was not forthcoming; we had to raise the money by alternative corporate means.

2
p. 3
p.
 Introduction

The frequency and pace at which incidents are occurring is even more disturbing. The Congratulations on your recent promotion and good luck in the upcoming battle.
concern of the citizens is evident. Many have already fled the city. The ongoing mass We don’t have much to go on but this information should prove useful.
migration increases the concern of all remaining citizens as each day passes. Losses in tax
revenue are restricting the city’s ability to deal with incidents, and the emergency services are The Aliens are not acting as openly as before. UFOs have been appearing intermittently but no
unable to do any more than firefight existing problems. attacks have been made; these appearances have been sporadic and short-lived. In the past
we were invaded from other worlds but now, in 2084, the Aliens are travelling from another
Unless we deal with the source of the problem, social collapse appears to be a very real dimension. The means by which they achieve trans-dimensional travel is unclear, but it is
possibility! While the Senate remains unconvinced that Alien interference is the source of the apparent that the UFOs use some form of Dimensional Gateway. The gateways can appear
problems, they have secretly agreed to fund a covert investigation by X-COM. anywhere in Mega-Primus. We would advise beginning the research of Dimension Gates
immediately.
Due to your recent promotion, we have decided that you shall be responsible for this
investigation. We will forward existing information to you shortly. You have at your disposal the finest technology Mega-Primus has to offer to combat the Alien
menace. Your Agents will be responsible for investigating any strange events that might
Yours faithfully reveal Alien activity.

J.G Steinbach The objective of these investigations is to gather as much information about the Aliens and
their technology as possible. To defend Mega-Primus effectively, you will be responsible for
X-COM Supreme Commander research and development based on the results of these investigations.
To: Section Commander
From: Tactical Office X-COM must recover all Alien artifacts and technology from Alien encounters, in order to
Subject: X-COM INTELLIGENCE REPORT AND OBJECTIVES SUMMARY research and develop new weapons and craft. The results of your investigations will be
Date: March 2084 published in the UFOpaedia, so that both you and your Agents have the most up-to-date
information. Without this information we will not know of the Aliens’ intent or, more
importantly, a means by which we can defeat them.

4
p. 5
p.
 Introduction

The frequency and pace at which incidents are occurring is even more disturbing. The Congratulations on your recent promotion and good luck in the upcoming battle.
concern of the citizens is evident. Many have already fled the city. The ongoing mass We don’t have much to go on but this information should prove useful.
migration increases the concern of all remaining citizens as each day passes. Losses in tax
revenue are restricting the city’s ability to deal with incidents, and the emergency services are The Aliens are not acting as openly as before. UFOs have been appearing intermittently but no
unable to do any more than firefight existing problems. attacks have been made; these appearances have been sporadic and short-lived. In the past
we were invaded from other worlds but now, in 2084, the Aliens are travelling from another
Unless we deal with the source of the problem, social collapse appears to be a very real dimension. The means by which they achieve trans-dimensional travel is unclear, but it is
possibility! While the Senate remains unconvinced that Alien interference is the source of the apparent that the UFOs use some form of Dimensional Gateway. The gateways can appear
problems, they have secretly agreed to fund a covert investigation by X-COM. anywhere in Mega-Primus. We would advise beginning the research of Dimension Gates
immediately.
Due to your recent promotion, we have decided that you shall be responsible for this
investigation. We will forward existing information to you shortly. You have at your disposal the finest technology Mega-Primus has to offer to combat the Alien
menace. Your Agents will be responsible for investigating any strange events that might
Yours faithfully reveal Alien activity.

J.G Steinbach The objective of these investigations is to gather as much information about the Aliens and
their technology as possible. To defend Mega-Primus effectively, you will be responsible for
X-COM Supreme Commander research and development based on the results of these investigations.
To: Section Commander
From: Tactical Office X-COM must recover all Alien artifacts and technology from Alien encounters, in order to
Subject: X-COM INTELLIGENCE REPORT AND OBJECTIVES SUMMARY research and develop new weapons and craft. The results of your investigations will be
Date: March 2084 published in the UFOpaedia, so that both you and your Agents have the most up-to-date
information. Without this information we will not know of the Aliens’ intent or, more
importantly, a means by which we can defeat them.

4
p. 5
p.
 Introduction

X-COM should retain a covert status as it monitors the situation in the city. Our investigation When your Agents are not engaged in close combat, you will be in charge of X-COM’s wider
is secretly funded by the Senate and without this funding, the effectiveness and scope of operations in the Cityscape. Here you must develop adept management skills in order to
operations will be severely diminished. maximize the potential of X-COM, its personnel and the many resources at your disposal. In
order to advance in the game, you must recover as many Alien artifacts as you can from your
The success of our operation depends on your efforts. The safety of Mega-Primus is in your Tactical Combat Missions so that your scientists can carry out research about the Aliens and
hands; your task is to command X-COM’s forces to defeat the Alien incursion! the Alien threat.

SPECIAL NOTE TO
GAME OVERVIEW X-COM VETERANS

™
X-COM: Apocalypse is an absorbing strategy game featuring two very different key elements: Although elements of X-COM: Apocalypse will be familiar to players of X-COM: UFO Defense
Tactical Combat Missions and the Cityscape. In order to protect Mega-Primus successfully and X-COM: Terror From the Deep, much of the game’s content is new, as is the interface,
from the Alien menace, you must master both of these elements. which has been totally redesigned to incorporate many new functions. It is recommended that
X-COM veterans participate in the Tutorial Section of the manual to familiarize themselves
Tactical Combat Missions provide the challenge of exploration and tense combat against the with the new features available.
Aliens. Missions can take place anywhere in Mega-Primus; your squads of Agents could do
battle with the Alien menace in factories, multi-level corporate buildings and many other city Players are also advised to read the X-COM Rookies’ Guide, provided in your X-COM:
locations. The Tactical section of X-COM: Apocalypse is no arcade blast; you will need to Apocalypse package, in order to increase your enjoyment and understanding of the X-COM
apply a wide range of strategies and tactics as you hunt down the Aliens. Whatever you do: world.
“Don’t Get Hurt.”

6
p. 7
p.
 Introduction

X-COM should retain a covert status as it monitors the situation in the city. Our investigation When your Agents are not engaged in close combat, you will be in charge of X-COM’s wider
is secretly funded by the Senate and without this funding, the effectiveness and scope of operations in the Cityscape. Here you must develop adept management skills in order to
operations will be severely diminished. maximize the potential of X-COM, its personnel and the many resources at your disposal. In
order to advance in the game, you must recover as many Alien artifacts as you can from your
The success of our operation depends on your efforts. The safety of Mega-Primus is in your Tactical Combat Missions so that your scientists can carry out research about the Aliens and
hands; your task is to command X-COM’s forces to defeat the Alien incursion! the Alien threat.

SPECIAL NOTE TO
GAME OVERVIEW X-COM VETERANS

™
X-COM: Apocalypse is an absorbing strategy game featuring two very different key elements: Although elements of X-COM: Apocalypse will be familiar to players of X-COM: UFO Defense
Tactical Combat Missions and the Cityscape. In order to protect Mega-Primus successfully and X-COM: Terror From the Deep, much of the game’s content is new, as is the interface,
from the Alien menace, you must master both of these elements. which has been totally redesigned to incorporate many new functions. It is recommended that
X-COM veterans participate in the Tutorial Section of the manual to familiarize themselves
Tactical Combat Missions provide the challenge of exploration and tense combat against the with the new features available.
Aliens. Missions can take place anywhere in Mega-Primus; your squads of Agents could do
battle with the Alien menace in factories, multi-level corporate buildings and many other city Players are also advised to read the X-COM Rookies’ Guide, provided in your X-COM:
locations. The Tactical section of X-COM: Apocalypse is no arcade blast; you will need to Apocalypse package, in order to increase your enjoyment and understanding of the X-COM
apply a wide range of strategies and tactics as you hunt down the Aliens. Whatever you do: world.
“Don’t Get Hurt.”

6
p. 7
p.
 Introduction

INSTALLING X-COM : APOCALYPSE FROM WINDOWS 95

FINDING OUT WHERE
EVERYTHING IS Insert the X-COM: Apocalypse disc into your CD-ROM drive. If you have not disabled the AutoPlay
feature in Windows 95, your CD-ROM will automatically take you into the installation program. Simply
follow the onscreen instructions.
The ReadMe file, that comes on the CD-ROM, provides details of the very latest changes (due If the Install program does not AutoPlay, select your CD-ROM drive from MY COMPUTER, then click
to printing and binding time, the manual has to be completed before the game is finished.) INSTALL.EXE.
After installation is complete, an X-COM: Apocalypse icon will appear in the MicroProse Program Group.
LOADING X-COM: APOCALYPSE FROM WINDOWS 95
INSTALLATION
AND LOADING Select X-COM: Apocalypse in the MicroProse Program Group.
The MicroProse Program Group is accessed from ‘Programs’ which is found on the Start icon at the
bottom left of the Windows 95 desktop screen.
SYSTEM REQUIREMENTS X-COM: Apocalypse will now run automatically.
For IBM PC 486 DX/4 (100MHz minimum), Pentium and most compatibles Alternatively, double-click on the X-COM: Apocalypse icon from within the Program Group itself.
Required INSTALLING X-COM: APOCALYPSE FROM MS-DOS
8MB RAM (16MB RAM if running under Windows 95) An MS-DOS installation program is included on the X-COM: Apocalypse CD-ROM.
Quad-speed CD-ROM Drive Insert the disc into your CD-ROM drive and designate that drive—usually by typing “D: e”.
Hard drive (20MB free)
MSDEX 2.2 or higher When the new prompt appears, type “INSTALL e”.
MS-DOS 5.0 or higher Please follow all onscreen prompts.
SVGA 640x480x256 Colors (VESA required) Unless you specify otherwise, X-COM: Apocalypse will be installed to a directory named C:\XCOMA.
Microsoft Mouse driver v8.20 or higher
LOADING X-COM: APOCALYPSE FROM MS-DOS
Recommended
Switch on your machine and wait until the C:\> prompt appears.
Pentium 90MHz or better
16MB RAM Insert the X-COM: Apocalypse disc into the CD-ROM drive.
Hard drive (60MB free) Type “CD XCOMA e” and then type “XCOMAPOC e” to run the game.
Sound Cards Supported Note: if you have installed X-COM: Apocalypse to another directory, you must type “CD [name of your
Sound Blaster and 100% compatibles, directory] e” and then type “XCOMAPOC e”.
Microsoft Sound System, ESS Audio Drive,
ProAudio Spectrum, Ensoniq Soundscape
and Gravis UltraSound

8
p. 9
p.
 Introduction

INSTALLING X-COM : APOCALYPSE FROM WINDOWS 95

FINDING OUT WHERE
EVERYTHING IS Insert the X-COM: Apocalypse disc into your CD-ROM drive. If you have not disabled the AutoPlay
feature in Windows 95, your CD-ROM will automatically take you into the installation program. Simply
follow the onscreen instructions.
The ReadMe file, that comes on the CD-ROM, provides details of the very latest changes (due If the Install program does not AutoPlay, select your CD-ROM drive from MY COMPUTER, then click
to printing and binding time, the manual has to be completed before the game is finished.) INSTALL.EXE.
After installation is complete, an X-COM: Apocalypse icon will appear in the MicroProse Program Group.
LOADING X-COM: APOCALYPSE FROM WINDOWS 95
INSTALLATION
AND LOADING Select X-COM: Apocalypse in the MicroProse Program Group.
The MicroProse Program Group is accessed from ‘Programs’ which is found on the Start icon at the
bottom left of the Windows 95 desktop screen.
SYSTEM REQUIREMENTS X-COM: Apocalypse will now run automatically.
For IBM PC 486 DX/4 (100MHz minimum), Pentium and most compatibles Alternatively, double-click on the X-COM: Apocalypse icon from within the Program Group itself.
Required INSTALLING X-COM: APOCALYPSE FROM MS-DOS
8MB RAM (16MB RAM if running under Windows 95) An MS-DOS installation program is included on the X-COM: Apocalypse CD-ROM.
Quad-speed CD-ROM Drive Insert the disc into your CD-ROM drive and designate that drive—usually by typing “D: e”.
Hard drive (20MB free)
MSDEX 2.2 or higher When the new prompt appears, type “INSTALL e”.
MS-DOS 5.0 or higher Please follow all onscreen prompts.
SVGA 640x480x256 Colors (VESA required) Unless you specify otherwise, X-COM: Apocalypse will be installed to a directory named C:\XCOMA.
Microsoft Mouse driver v8.20 or higher
LOADING X-COM: APOCALYPSE FROM MS-DOS
Recommended
Switch on your machine and wait until the C:\> prompt appears.
Pentium 90MHz or better
16MB RAM Insert the X-COM: Apocalypse disc into the CD-ROM drive.
Hard drive (60MB free) Type “CD XCOMA e” and then type “XCOMAPOC e” to run the game.
Sound Cards Supported Note: if you have installed X-COM: Apocalypse to another directory, you must type “CD [name of your
Sound Blaster and 100% compatibles, directory] e” and then type “XCOMAPOC e”.
Microsoft Sound System, ESS Audio Drive,
ProAudio Spectrum, Ensoniq Soundscape
and Gravis UltraSound

8
p. 9
p.
 Introduction

MOUSE CONTROL—‘DOUBLE CLICKING’

THIS MANUAL Move the cursor over the item and ‘click’ the LMB twice in quick succession.

MOUSE CONTROL—‘DRAG AND DROP’

This Manual is split into two main sections:
A ‘Drag and Drop’ system is also used in many parts of the game.
SECTION 1: THE GAMEPLAY TUTORIALS
• To ‘Drag’—click and hold the LMB over an item. This item will become attached to the
cursor. You can now move that item around the screen.
This section is designed to get you playing X-COM: Apocalypse as quickly as possible. We
recommend that those new to X-COM complete each Tutorial before embarking on a new • To ‘Drop’ an item—after you have ‘Dragged’ it, simply release the LMB when the item is
campaign. over your intended destination.

SECTION 2: THE REFERENCE GUIDE TOOL TIPS

We have worked very hard to make the interface as ‘user friendly’ as possible. If you are
The X-COM veteran may choose to start with the Reference Guide. This section contains unsure as to the function of any button or icon, just leave the cursor over the option for a
details of the updated interface and additional features in X-COM: Apocalypse. second and some help text will appear. (You can turn off this feature at the Options Screen.)

THE POINT AND

CLICK INTERFACE GAME SCREENS

X-COM: Apocalypse is played using the mouse. There are two Control Panels that you will use most. These are the:
• Cityscape Control Panel
MOUSE CONTROL—‘CLICKING’ • Tactical Control Panel
You will often be asked to ‘click’ on a particular area of the screen. Depending on the screen
you may be asked to ‘click’ on buttons, icons or text. To do this, simply move the cursor over
the item and press the Left Mouse Button (LMB), unless otherwise stated.

10
p. 11
p.
 Introduction

MOUSE CONTROL—‘DOUBLE CLICKING’

THIS MANUAL Move the cursor over the item and ‘click’ the LMB twice in quick succession.

MOUSE CONTROL—‘DRAG AND DROP’

This Manual is split into two main sections:
A ‘Drag and Drop’ system is also used in many parts of the game.
SECTION 1: THE GAMEPLAY TUTORIALS
• To ‘Drag’—click and hold the LMB over an item. This item will become attached to the
cursor. You can now move that item around the screen.
This section is designed to get you playing X-COM: Apocalypse as quickly as possible. We
recommend that those new to X-COM complete each Tutorial before embarking on a new • To ‘Drop’ an item—after you have ‘Dragged’ it, simply release the LMB when the item is
campaign. over your intended destination.

SECTION 2: THE REFERENCE GUIDE TOOL TIPS

We have worked very hard to make the interface as ‘user friendly’ as possible. If you are
The X-COM veteran may choose to start with the Reference Guide. This section contains unsure as to the function of any button or icon, just leave the cursor over the option for a
details of the updated interface and additional features in X-COM: Apocalypse. second and some help text will appear. (You can turn off this feature at the Options Screen.)

THE POINT AND

CLICK INTERFACE GAME SCREENS

X-COM: Apocalypse is played using the mouse. There are two Control Panels that you will use most. These are the:
• Cityscape Control Panel
MOUSE CONTROL—‘CLICKING’ • Tactical Control Panel
You will often be asked to ‘click’ on a particular area of the screen. Depending on the screen
you may be asked to ‘click’ on buttons, icons or text. To do this, simply move the cursor over
the item and press the Left Mouse Button (LMB), unless otherwise stated.

10
p. 11
p.
 Note: we will cover these in more detail later.

All other screens in the game are based around a common layout. THE GAMEPLAY
TUTORIALS
X-COM Funds

Menu Bar

OK

• The Menu Bar will always appear down the right-hand edge of any screen.
• The OK button will always appear at the bottom of the Menu Bar. This button will always
accept what you have done and close the screen.
• X-COM’s funds will always be displayed at the top-right of the screen.

12
p. 13
p.
 Note: we will cover these in more detail later.

All other screens in the game are based around a common layout. THE GAMEPLAY
TUTORIALS
X-COM Funds

Menu Bar

OK

• The Menu Bar will always appear down the right-hand edge of any screen.
• The OK button will always appear at the bottom of the Menu Bar. This button will always
accept what you have done and close the screen.
• X-COM’s funds will always be displayed at the top-right of the screen.

12
p. 13
p.
 The Gameplay Tutorials

Welcome to X-COM: Apocalypse. The following section is designed to help you get into the • Move the cursor over the Start Campaign Game button and click the Left Mouse Button
game with the minimum of fuss. The two main sections of the game are covered here: the (LMB) to select. You will now be taken to the Select Difficulty Screen.
Cityscape, where you deploy your Agents to investigate Alien activity, and Tactical Combat,
where your Agents combat the Alien menace face to face. In the final Tutorial, we will return
to the Cityscape to buy equipment, recruit and equip Agents.

For extra information on particular game features, please see the Reference Guide later in
this manual.

First of all, we will begin a new game.

STARTING A NEW GAME

After watching the introduction, you will be taken to the Main Menu.

All of the Tutorials are written assuming that you are playing at Novice level.

• Move the cursor over the Novice button and click the LMB to select. Once you have
mastered Novice level, you should choose a harder level for a tougher challenge.

You will now be taken to the Cityscape Screen.

14
p. 15
p.
 The Gameplay Tutorials

Welcome to X-COM: Apocalypse. The following section is designed to help you get into the • Move the cursor over the Start Campaign Game button and click the Left Mouse Button
game with the minimum of fuss. The two main sections of the game are covered here: the (LMB) to select. You will now be taken to the Select Difficulty Screen.
Cityscape, where you deploy your Agents to investigate Alien activity, and Tactical Combat,
where your Agents combat the Alien menace face to face. In the final Tutorial, we will return
to the Cityscape to buy equipment, recruit and equip Agents.

For extra information on particular game features, please see the Reference Guide later in
this manual.

First of all, we will begin a new game.

STARTING A NEW GAME

After watching the introduction, you will be taken to the Main Menu.

All of the Tutorials are written assuming that you are playing at Novice level.

• Move the cursor over the Novice button and click the LMB to select. Once you have
mastered Novice level, you should choose a harder level for a tougher challenge.

You will now be taken to the Cityscape Screen.

14
p. 15
p.
 TUTORIAL ONE: USING
THE CITYSCAPE

In this first Tutorial we will take a look around Mega-Primus, introduce the basic controls of In the Control Panel you will see the Message Bar, a group of Cityscape Options, a display
the Cityscape, focus on Alerts and deploy your Agents on Tactical Missions. of the Game Time, the Time Controls and the Central Information Panel (more on the use of
this later).

EXPLORING THE CITY

Cityscape Display

Let’s begin by taking a look around Mega-Primus using the Cityscape Display. At the
beginning of the game, the Cityscape Display will be an Isometric Map View of the city.

• Move the mouse cursor to the left edge of the screen. The screen will scroll revealing more
Control Panel of the city. Move the cursor to the other edges of the screen and explore more of the city.
You will see many of the city’s futuristic buildings, including Corporate HQs, the
Astrodome, Police Stations and even the City Slums.
The Cityscape allows you to manage X-COM’s resources and develop your long term strategy.
It is split into two areas: the Cityscape Display and the Control Panel. At the beginning of the Note: to find out more about each building, simply click on one to open the Buildings Screen.
game, the Cityscape Display will be centered on your current Base. Your Base contains the The Buildings Screen provides you with useful information about who owns the building, its
vehicles, equipment and Agents with which you will begin your new campaign. function, and what Agents and vehicles are at the building.

You can also use the cursor keys on the keyboard to scroll around the Cityscape Display.

Central Information
Panel Message Bar

Game Time and

Cityscape Options Time Controls

16
p. p. 17
 TUTORIAL ONE: USING
THE CITYSCAPE

In this first Tutorial we will take a look around Mega-Primus, introduce the basic controls of In the Control Panel you will see the Message Bar, a group of Cityscape Options, a display
the Cityscape, focus on Alerts and deploy your Agents on Tactical Missions. of the Game Time, the Time Controls and the Central Information Panel (more on the use of
this later).

EXPLORING THE CITY

Cityscape Display

Let’s begin by taking a look around Mega-Primus using the Cityscape Display. At the
beginning of the game, the Cityscape Display will be an Isometric Map View of the city.

• Move the mouse cursor to the left edge of the screen. The screen will scroll revealing more
Control Panel of the city. Move the cursor to the other edges of the screen and explore more of the city.
You will see many of the city’s futuristic buildings, including Corporate HQs, the
Astrodome, Police Stations and even the City Slums.
The Cityscape allows you to manage X-COM’s resources and develop your long term strategy.
It is split into two areas: the Cityscape Display and the Control Panel. At the beginning of the Note: to find out more about each building, simply click on one to open the Buildings Screen.
game, the Cityscape Display will be centered on your current Base. Your Base contains the The Buildings Screen provides you with useful information about who owns the building, its
vehicles, equipment and Agents with which you will begin your new campaign. function, and what Agents and vehicles are at the building.

You can also use the cursor keys on the keyboard to scroll around the Cityscape Display.

Central Information
Panel Message Bar

Game Time and

Cityscape Options Time Controls

16
p. p. 17
 Tutorial One: Using The Cityscape

• Click on the X-COM Vehicles Tab (to the right of the Bases Tab), it will turn Blue. All
THE CENTRAL
INFORMATION PANEL functions that relate to X-COM Vehicles are colored Blue.
• Click on the other Tabs and you will see that they are also color-coded as follows:
The Central Information Panel is very important in the game and it is this that we will look at
next. X-COM Agents - Light Green
X-COM Biochemistry Quantum Organizations Biochemistry - Purple
Vehicles Tab Tab Physics Tab Tab Engineering - Purple
Quantum Physics - Purple
Hostile Vehicles - Red
Organizations - Orange

Now that you are familiar with the Central Information Panel, we will look at another
important feature of the game, the Time Controls.

Note: if you wish to pause time at any stage during the game, simply click .
Engineering Hostile
Bases Tab Agent Tab Tab Vehicles Tab

GAME TIME CONTROLS

The Central Information Panel is split into eight ‘Tabs.’ Each ‘Tab’ provides access to further
options allowing you to manage all of X-COM’s resources effectively.

At the moment the Bases Tab is selected. Notice that it is colored Green. Also note that any Pause
icon that takes you to a Base related screen, will also be Green. Throughout X-COM:
Game Time
Apocalypse, a color-coding system is used to help you learn the interface.
Slow Speed Normal Speed

Double Speed Quad Speed

Ultra Fast

18
p. 19
p.
 Tutorial One: Using The Cityscape

• Click on the X-COM Vehicles Tab (to the right of the Bases Tab), it will turn Blue. All
THE CENTRAL
INFORMATION PANEL functions that relate to X-COM Vehicles are colored Blue.
• Click on the other Tabs and you will see that they are also color-coded as follows:
The Central Information Panel is very important in the game and it is this that we will look at
next. X-COM Agents - Light Green
X-COM Biochemistry Quantum Organizations Biochemistry - Purple
Vehicles Tab Tab Physics Tab Tab Engineering - Purple
Quantum Physics - Purple
Hostile Vehicles - Red
Organizations - Orange

Now that you are familiar with the Central Information Panel, we will look at another
important feature of the game, the Time Controls.

Note: if you wish to pause time at any stage during the game, simply click .
Engineering Hostile
Bases Tab Agent Tab Tab Vehicles Tab

GAME TIME CONTROLS

The Central Information Panel is split into eight ‘Tabs.’ Each ‘Tab’ provides access to further
options allowing you to manage all of X-COM’s resources effectively.

At the moment the Bases Tab is selected. Notice that it is colored Green. Also note that any Pause
icon that takes you to a Base related screen, will also be Green. Throughout X-COM:
Game Time
Apocalypse, a color-coding system is used to help you learn the interface.
Slow Speed Normal Speed

Double Speed Quad Speed

Ultra Fast

18
p. 19
p.
 Tutorial One: Using The Cityscape

Investigate
Look at the Game Time. You will see that it is passing at a very slow rate, allowing you time Incident
to plan your strategy and look around the city. To control the rate at which time passes, you
Equip
can click any of the Time Controls. Agent
Equip
• Click . Time will pass at an increased rate (as time passes, you will eventually see day Vehicle
change to night).
Agent
Icons Vehicle
You can use the Time Controls to speed up the pace of the action. Icons

Note: clicking will advance the time much faster than any of the other Time Controls.
Because time passes so fast in this mode, it is easy to miss events in the city; with this in
mind, the game will automatically slow to Normal Speed whenever a key event occurs. The
Ultra Fast time option cannot be activated until this event is over (i.e., Ultra Fast will be
disabled while a UFO is in the city).

THE ALERT SCREEN

Whenever there is Alien activity in Mega-Primus, X-COM will be informed via the Alert
Screen.
We will now advance time to the point where you will receive your first Alert (if this has not
happened already). To send a squad to the Alert Site, you must first assign them to an X-COM vehicle. All
unassigned Agents are listed on the left-hand side of the screen; all assigned Agents and
• Click in the Time Controls. Time will pass at the maximum rate. Shortly, the Alert X-COM vehicles are listed on the right-hand side.
Screen will appear (while you are in this screen, time will be suspended until you return to
the Cityscape). We will now assign four Agents to Valkyrie Interceptor 1.

20
p. 21
p.
 Tutorial One: Using The Cityscape

Investigate
Look at the Game Time. You will see that it is passing at a very slow rate, allowing you time Incident
to plan your strategy and look around the city. To control the rate at which time passes, you
Equip
can click any of the Time Controls. Agent
Equip
• Click . Time will pass at an increased rate (as time passes, you will eventually see day Vehicle
change to night).
Agent
Icons Vehicle
You can use the Time Controls to speed up the pace of the action. Icons

Note: clicking will advance the time much faster than any of the other Time Controls.
Because time passes so fast in this mode, it is easy to miss events in the city; with this in
mind, the game will automatically slow to Normal Speed whenever a key event occurs. The
Ultra Fast time option cannot be activated until this event is over (i.e., Ultra Fast will be
disabled while a UFO is in the city).

THE ALERT SCREEN

Whenever there is Alien activity in Mega-Primus, X-COM will be informed via the Alert
Screen.
We will now advance time to the point where you will receive your first Alert (if this has not
happened already). To send a squad to the Alert Site, you must first assign them to an X-COM vehicle. All
unassigned Agents are listed on the left-hand side of the screen; all assigned Agents and
• Click in the Time Controls. Time will pass at the maximum rate. Shortly, the Alert X-COM vehicles are listed on the right-hand side.
Screen will appear (while you are in this screen, time will be suspended until you return to
the Cityscape). We will now assign four Agents to Valkyrie Interceptor 1.

20
p. 21
p.
 Tutorial One: Using The Cityscape

• Highlight an Agent’s name (from the left-hand list).

• Click from the Menu Bar to send the Valkyrie to the Alert Site.
• Click and hold the Left Mouse Button with the cursor over the Agent Icon. Drag that Agent
(from the left-hand list) to the Valkyrie Interceptor icon and release the LMB. The Agent Note: you can also send Agents without vehicles. Simply select Agents from the left-hand list;
should now appear underneath it. these are unassigned Agents. All your Agents are automatically armed at the beginning of
each new campaign.
The number ‘1’ should appear in the corner of the Valkyrie icon showing that one Agent is
now assigned to that vehicle. As you assign more Agents to the Valkyrie Interceptor, this
TRACKING X-COM
number will increase to indicate the total number of Agents assigned. VEHICLES

We will now assign three more Agents. When assigning multiple Agents there is a shortcut
that you can use, instead of dragging them all individually. It is often useful (and fun) to follow Vehicles as they move to their destinations. In this
example, we will follow Valkyrie Interceptor 1 as it proceeds to the Alert Site.
• Click on the names of three more Agents, so that they are highlighted.
• Drag and drop one of these Agents to the Valkyrie Interceptor. You will notice that all of the
selected Agents will now be transferred from the left side of the screen to the Valkyrie
Interceptor.

Note: if you click the Agent or Vehicle Icons, you will be taken to the Equip Agent Screen or
the Equip Vehicle Screen.

Now that your Agents are assigned, we can deploy them to the Alert Site.
Valkyrie Interceptor Vehicle List
The text, “Valkyrie Interceptor 1” and the name of the Agents assigned to it, will now be
highlighted.

22
p. 23
p.
 Tutorial One: Using The Cityscape

• Highlight an Agent’s name (from the left-hand list).

• Click from the Menu Bar to send the Valkyrie to the Alert Site.
• Click and hold the Left Mouse Button with the cursor over the Agent Icon. Drag that Agent
(from the left-hand list) to the Valkyrie Interceptor icon and release the LMB. The Agent Note: you can also send Agents without vehicles. Simply select Agents from the left-hand list;
should now appear underneath it. these are unassigned Agents. All your Agents are automatically armed at the beginning of
each new campaign.
The number ‘1’ should appear in the corner of the Valkyrie icon showing that one Agent is
now assigned to that vehicle. As you assign more Agents to the Valkyrie Interceptor, this
TRACKING X-COM
number will increase to indicate the total number of Agents assigned. VEHICLES

We will now assign three more Agents. When assigning multiple Agents there is a shortcut
that you can use, instead of dragging them all individually. It is often useful (and fun) to follow Vehicles as they move to their destinations. In this
example, we will follow Valkyrie Interceptor 1 as it proceeds to the Alert Site.
• Click on the names of three more Agents, so that they are highlighted.
• Drag and drop one of these Agents to the Valkyrie Interceptor. You will notice that all of the
selected Agents will now be transferred from the left side of the screen to the Valkyrie
Interceptor.

Note: if you click the Agent or Vehicle Icons, you will be taken to the Equip Agent Screen or
the Equip Vehicle Screen.

Now that your Agents are assigned, we can deploy them to the Alert Site.
Valkyrie Interceptor Vehicle List
The text, “Valkyrie Interceptor 1” and the name of the Agents assigned to it, will now be
highlighted.

22
p. 23
p.
 Tutorial One: Using The Cityscape

TUTORIAL TWO: TACTICAL

COMBAT

• Click the X-COM Vehicles Tab and then select the Valkyrie Interceptor from the Vehicle This, the second Tutorial, guides you through Tactical Combat; the section of the game where
List. The icon will highlight and the display will center on the Interceptor. The display will you fight hostile units face to face. You will learn how to save your game, move the Tactical
automatically scroll with the Vehicle as it heads towards the Alert Site. Display, select squads/Agents and issue basic movement orders.

When your Agents have arrived at the Alert Site, the Commence Investigation ‘window’ will You can play the Tactical Game in two different modes: Real-Time or Turn-Based. In Real-
open. This prompts you to confirm whether you wish to investigate or not. Time you move your Agents around while the Aliens move—playing in this way requires a
greater strategic approach. Players of previous X-COM games will be familiar with the Turn-
• Click Yes to begin your first Tactical Combat Mission. Based game, where X-COM and the Aliens take Turns to move, just like a game of chess.

You have now learned how to deploy vehicles and Agents to Alert Sites. The next section will The Tutorials assume that you are playing the Real-Time game; you can follow the Tutorial
guide you through Tactical Combat Missions. playing the Turn-Based game, as the basic functions and controls are the same. Look for the
notes explaining where the Turn-Based game differs.

If you followed Tutorial One, you will have already successfully deployed your Agents to an
Alert Site. You should now be faced with the Mission Briefing giving you information about
your mission objectives. On this screen, you can also select the way in which you will play the
Tactical Mission: Turn-Based or Real-Time.

Start Start
Real-Time Game Turn-Based Game

24
p. p. 25
 Tutorial One: Using The Cityscape

TUTORIAL TWO: TACTICAL

COMBAT

• Click the X-COM Vehicles Tab and then select the Valkyrie Interceptor from the Vehicle This, the second Tutorial, guides you through Tactical Combat; the section of the game where
List. The icon will highlight and the display will center on the Interceptor. The display will you fight hostile units face to face. You will learn how to save your game, move the Tactical
automatically scroll with the Vehicle as it heads towards the Alert Site. Display, select squads/Agents and issue basic movement orders.

When your Agents have arrived at the Alert Site, the Commence Investigation ‘window’ will You can play the Tactical Game in two different modes: Real-Time or Turn-Based. In Real-
open. This prompts you to confirm whether you wish to investigate or not. Time you move your Agents around while the Aliens move—playing in this way requires a
greater strategic approach. Players of previous X-COM games will be familiar with the Turn-
• Click Yes to begin your first Tactical Combat Mission. Based game, where X-COM and the Aliens take Turns to move, just like a game of chess.

You have now learned how to deploy vehicles and Agents to Alert Sites. The next section will The Tutorials assume that you are playing the Real-Time game; you can follow the Tutorial
guide you through Tactical Combat Missions. playing the Turn-Based game, as the basic functions and controls are the same. Look for the
notes explaining where the Turn-Based game differs.

If you followed Tutorial One, you will have already successfully deployed your Agents to an
Alert Site. You should now be faced with the Mission Briefing giving you information about
your mission objectives. On this screen, you can also select the way in which you will play the
Tactical Mission: Turn-Based or Real-Time.

Start Start
Real-Time Game Turn-Based Game

24
p. p. 25
 Tutorial Two: Tactical Combat

• Click to go straight into the Real-Time game. Save

Game
• Or, click to start a Turn-Based game.

The Squad Assignment Screen will now open. From here you can assign your Agents into
different squads. It is possible to have up to six squads each containing up to six Agents (for
full details, see Squad Assignment Screen in the Tactical Game section of the Reference
Guide).

Note: as the cursor is moved over the Agents, their statistics and the weapons they are
carrying will be displayed in the Information Panel (on the left side of the screen).

At the moment we will leave your four Agents assigned to Squad One.

• Click OK to start the Tactical Game.

• Click on any of the 10 empty slots to save your game.

SAVING YOUR GAME
When the cursor appears, type in a name for your saved game using the keyboard and press
e.
The Tactical Screen will now appear. While the game is paused, you should take the
opportunity to save your current game. You can reload this saved game to replay the Tactical
Mission at a later date; we will also use this saved game for Tutorials Three and Four.

• Click .
• Click the Save Game button.

26
p. p. 27
 Tutorial Two: Tactical Combat

• Click to go straight into the Real-Time game. Save

Game
• Or, click to start a Turn-Based game.

The Squad Assignment Screen will now open. From here you can assign your Agents into
different squads. It is possible to have up to six squads each containing up to six Agents (for
full details, see Squad Assignment Screen in the Tactical Game section of the Reference
Guide).

Note: as the cursor is moved over the Agents, their statistics and the weapons they are
carrying will be displayed in the Information Panel (on the left side of the screen).

At the moment we will leave your four Agents assigned to Squad One.

• Click OK to start the Tactical Game.

• Click on any of the 10 empty slots to save your game.

SAVING YOUR GAME
When the cursor appears, type in a name for your saved game using the keyboard and press
e.
The Tactical Screen will now appear. While the game is paused, you should take the
opportunity to save your current game. You can reload this saved game to replay the Tactical
Mission at a later date; we will also use this saved game for Tutorials Three and Four.

• Click .
• Click the Save Game button.

26
p. p. 27
 Tutorial Two: Tactical Combat

Note: if you are playing the Turn-Based game, the Time Controls will be replaced by five new
THE TACTICAL SCREEN buttons. These are used to reserve Time Units for shooting and kneeling (more on this later).
There is also an End Turn button.

The Tactical Screen is split into two sections, the Tactical Display and the Control Panel.
Reserve Aimed-Shot

The Tactical Display always defaults to the Isometric Map View, which will be centered on Reserve Snap-Shot
your Agents that have been deployed in the Tactical Area.
Reserve Auto-Shot

Reserve Kneel

Isometric End Turn

Map View Message Bar

Hands Area
EXPLORING THE
TACTICAL DISPLAY
Control Panel Time Controls
Move the cursor to the edges of the screen. The display will scroll revealing more of the
Tactical Combat Area. At the start of each Tactical Mission, time is automatically paused so
that you are able to look around and plan your initial moves.

You can also use the cursor keys on the keyboard to scroll the Tactical Display.

28
p. 29
p.
 Tutorial Two: Tactical Combat

Note: if you are playing the Turn-Based game, the Time Controls will be replaced by five new
THE TACTICAL SCREEN buttons. These are used to reserve Time Units for shooting and kneeling (more on this later).
There is also an End Turn button.

The Tactical Screen is split into two sections, the Tactical Display and the Control Panel.
Reserve Aimed-Shot

The Tactical Display always defaults to the Isometric Map View, which will be centered on Reserve Snap-Shot
your Agents that have been deployed in the Tactical Area.
Reserve Auto-Shot

Reserve Kneel

Isometric End Turn

Map View Message Bar

Hands Area
EXPLORING THE
TACTICAL DISPLAY
Control Panel Time Controls
Move the cursor to the edges of the screen. The display will scroll revealing more of the
Tactical Combat Area. At the start of each Tactical Mission, time is automatically paused so
that you are able to look around and plan your initial moves.

You can also use the cursor keys on the keyboard to scroll the Tactical Display.

28
p. 29
p.
 Tutorial Two: Tactical Combat

The Agent’s present state of health is shown by the health bar positioned along the top of the
SELECTING SQUADS marker. In the lower half of the marker, the Agent’s Attack Mode is indicated by a colored bar.
Blue represents Safe Mode, Green is Cautious Mode and Red indicates Aggressive Mode.
Squad Icons Agent Icons
One of the Agent markers will be yellow; this is the Agent whose equipment will appear
centrally in the Control Panel. The current Attack Mode, Shot-Type and movement orders,
displayed in the Control Panel, also refer to this Agent only.

Note: in the Turn-Based Game, the Agent’s remaining Time Units will be displayed above
their marker.

MOVING SQUADS
In X-COM: Apocalypse, you can control Agents individually or collectively as squads.
Although we have only one squad at the moment, you may have up to six squads in the
Tactical Area at any one time.

The Squad Icons indicate the number of Agents in each squad; in this case we only have one
squad and, therefore, only the first icon is displayed. We have four Agents in our squad so
the number four is displayed in the Squad Icon.

• Double-click on the Squad Icon to select your squad. If you have scrolled the display so Group Formation Single File
that your Agents are ‘Off Screen,’ this will recenter the display on your Agents.

When you select a squad, the Agents will have an orange marker displayed above their heads
in the Isometric Map View. The squad number is displayed in the center of the markers.

30
p. p. 31
 Tutorial Two: Tactical Combat

The Agent’s present state of health is shown by the health bar positioned along the top of the
SELECTING SQUADS marker. In the lower half of the marker, the Agent’s Attack Mode is indicated by a colored bar.
Blue represents Safe Mode, Green is Cautious Mode and Red indicates Aggressive Mode.
Squad Icons Agent Icons
One of the Agent markers will be yellow; this is the Agent whose equipment will appear
centrally in the Control Panel. The current Attack Mode, Shot-Type and movement orders,
displayed in the Control Panel, also refer to this Agent only.

Note: in the Turn-Based Game, the Agent’s remaining Time Units will be displayed above
their marker.

MOVING SQUADS
In X-COM: Apocalypse, you can control Agents individually or collectively as squads.
Although we have only one squad at the moment, you may have up to six squads in the
Tactical Area at any one time.

The Squad Icons indicate the number of Agents in each squad; in this case we only have one
squad and, therefore, only the first icon is displayed. We have four Agents in our squad so
the number four is displayed in the Squad Icon.

• Double-click on the Squad Icon to select your squad. If you have scrolled the display so Group Formation Single File
that your Agents are ‘Off Screen,’ this will recenter the display on your Agents.

When you select a squad, the Agents will have an orange marker displayed above their heads
in the Isometric Map View. The squad number is displayed in the center of the markers.

30
p. p. 31
 Tutorial Two: Tactical Combat

After selecting a squad, you can move it in single file or in a Group-Formation. Group- Note: in the Turn-Based game, if the Agent hasn’t enough Time-Units or if Time-Units are
Formation is selected as the default movement mode because it allows your Agents to cover a reserved for other actions, the Agent will not be able to complete the move until X-COM’s
wider area and explore more in a shorter space of time. next Turn. If the destination is a long distance away, it may take the Agent several Turns to
complete.
In the Tactical Game, the cursor is accompanied by a green box as you move it around the
Tactical Display. You may notice that the box turns yellow if you move it over a square Whenever your Agents have run out of Time Units, simply click . After the Aliens have
occupied by one of your Agents. This box is used to set the destinations for your Agents. taken their Turn, your Agents will have all of their Time Units returned to them, allowing you
to play on.
• Move the cursor to a position a short way in front of the squad and click. Four yellow
arrows will appear to mark the destination of your Agents. While you are exploring the Tactical Area, you may well come into contact with Aliens. The
game will pause and the Message Panel will inform you of the current situation. It is
In order for your Agents to move, we must set time running. recommended that you take advantage of this to reorder your Agents to cope with the new
situation. Giving your Agents regularly updated orders will keep them alive longer!
• Click from the Time Controls. Your Agents will now move to their new positions.
Beware: in the Real-Time game, the Aliens can also move and your Agents may be • Click to resume the action. Your Agents should open fire. The first Aliens you
attacked at any time! encounter will be quite easy and your Agents should be able to pick them off with ease.
Leaving Agents without cover is not advised, though, as direct Alien hits can cause serious
The objective of the current Tactical Mission is to find the Aliens and either stun or kill them. injuries.
Practice moving your squad around the building. Experiment with both types of squad
formation. Note: shooting Aliens is covered in more detail in Tutorial Four.

You will notice as you move around more of the Tactical Area becomes visible. This is • Click so that we can look at some other controls without being attacked.
because your Agents can only see what is in their Line Of Sight.

• Move the cursor to a position away from your Agents and press the Right Mouse Button
(RMB). Your Agents will turn to face the direction of the cursor. This feature is very useful
when exploring the Tactical Area.

32
p. 33
p.
 Tutorial Two: Tactical Combat

After selecting a squad, you can move it in single file or in a Group-Formation. Group- Note: in the Turn-Based game, if the Agent hasn’t enough Time-Units or if Time-Units are
Formation is selected as the default movement mode because it allows your Agents to cover a reserved for other actions, the Agent will not be able to complete the move until X-COM’s
wider area and explore more in a shorter space of time. next Turn. If the destination is a long distance away, it may take the Agent several Turns to
complete.
In the Tactical Game, the cursor is accompanied by a green box as you move it around the
Tactical Display. You may notice that the box turns yellow if you move it over a square Whenever your Agents have run out of Time Units, simply click . After the Aliens have
occupied by one of your Agents. This box is used to set the destinations for your Agents. taken their Turn, your Agents will have all of their Time Units returned to them, allowing you
to play on.
• Move the cursor to a position a short way in front of the squad and click. Four yellow
arrows will appear to mark the destination of your Agents. While you are exploring the Tactical Area, you may well come into contact with Aliens. The
game will pause and the Message Panel will inform you of the current situation. It is
In order for your Agents to move, we must set time running. recommended that you take advantage of this to reorder your Agents to cope with the new
situation. Giving your Agents regularly updated orders will keep them alive longer!
• Click from the Time Controls. Your Agents will now move to their new positions.
Beware: in the Real-Time game, the Aliens can also move and your Agents may be • Click to resume the action. Your Agents should open fire. The first Aliens you
attacked at any time! encounter will be quite easy and your Agents should be able to pick them off with ease.
Leaving Agents without cover is not advised, though, as direct Alien hits can cause serious
The objective of the current Tactical Mission is to find the Aliens and either stun or kill them. injuries.
Practice moving your squad around the building. Experiment with both types of squad
formation. Note: shooting Aliens is covered in more detail in Tutorial Four.

You will notice as you move around more of the Tactical Area becomes visible. This is • Click so that we can look at some other controls without being attacked.
because your Agents can only see what is in their Line Of Sight.

• Move the cursor to a position away from your Agents and press the Right Mouse Button
(RMB). Your Agents will turn to face the direction of the cursor. This feature is very useful
when exploring the Tactical Area.

32
p. 33
p.
 Tutorial Two: Tactical Combat

• Click the button once more to return the display to the original Level Mode 2 setting.
USING SPLIT LEVEL
VIEWS
When you are playing the Tactical Game, you may often need to switch to the level above or
below the one that is currently displayed.
The Tactical Area is built up of several levels. These may be viewed individually or assembled
into a complete 3-D picture. Splitting the Tactical Area into levels allows you to see behind You can change to any level instantly, using the Level Indicator, positioned in the center of the
walls and inside rooms (if you have already explored them). Control Panel. To change to Level 5, for example, simply click on the number 5.

At the moment, the Tactical Area is set to Level Mode 2 (its default setting). This displays the Alternatively, you can use the buttons to move the display up or down a single level.
level you are on and any levels below.
• Click on the different levels using the Level Indicator and notice the display changing. Also
• Click and the display will change to Level Mode 1; notice the button will change. This try moving the levels up and down, using the buttons.
hides everything above and below the currently selected level; this is why some rooms in
the building appear to have no roof. Note: u and y, on your keyboard, can also be used to move up or down a level.
• Click again and the display will change to Level Mode 3. All levels are now displayed
at once producing a complete 3-D picture.

Level
Indicator

Toggle Map
Level Display Up/Down
Level

34
p. p. 35
 Tutorial Two: Tactical Combat

• Click the button once more to return the display to the original Level Mode 2 setting.
USING SPLIT LEVEL
VIEWS
When you are playing the Tactical Game, you may often need to switch to the level above or
below the one that is currently displayed.
The Tactical Area is built up of several levels. These may be viewed individually or assembled
into a complete 3-D picture. Splitting the Tactical Area into levels allows you to see behind You can change to any level instantly, using the Level Indicator, positioned in the center of the
walls and inside rooms (if you have already explored them). Control Panel. To change to Level 5, for example, simply click on the number 5.

At the moment, the Tactical Area is set to Level Mode 2 (its default setting). This displays the Alternatively, you can use the buttons to move the display up or down a single level.
level you are on and any levels below.
• Click on the different levels using the Level Indicator and notice the display changing. Also
• Click and the display will change to Level Mode 1; notice the button will change. This try moving the levels up and down, using the buttons.
hides everything above and below the currently selected level; this is why some rooms in
the building appear to have no roof. Note: u and y, on your keyboard, can also be used to move up or down a level.
• Click again and the display will change to Level Mode 3. All levels are now displayed
at once producing a complete 3-D picture.

Level
Indicator

Toggle Map
Level Display Up/Down
Level

34
p. p. 35
 Tutorial Two: Tactical Combat

SELECTING INDIVIDUAL MOVING INDIVIDUAL

AGENTS AGENTS

Squad Icons Agent Icons After selecting an Agent (see above), you are now ready to move that Agent.

• Click on a destination a short way in front of the Agent.

• A single yellow arrow will appear to mark the Agent’s new destination.
• Click .
• The Agent will now move to the new destination.

Note: Aliens or hostile units may be encountered at any time. Beware: ensure you keep an eye
There are two ways to select an Agent from the current squad. on your Agents!

• Click on any of the four Agent Icons on the right of the Control Panel; a yellow marker is • To make the selected Agent turn around, move the cursor to a position within the Tactical
now displayed above that Agent in the Isometric Map View. To deselect the other Agents, Display and click the RMB. The Agent will now turn to face in the direction of the cursor.
simply right-click on their Agent icons.
• Move the green cursor box over an unselected Agent in the Isometric Map View; the box THE OVERHEAD MAP
should change to yellow. Click on the Agent. The marker should disappear from the first VIEW
Agent and now appear above the second Agent. Clicking on a single Agent in the Isometric
Map View automatically causes all other Agents to be deselected. Now that we have started to move Agents around the Tactical Area, we will need to be aware
of their position as they continue to move around. For this, we can use the Overhead Map
View.

36
p. p. 37
 Tutorial Two: Tactical Combat

SELECTING INDIVIDUAL MOVING INDIVIDUAL

AGENTS AGENTS

Squad Icons Agent Icons After selecting an Agent (see above), you are now ready to move that Agent.

• Click on a destination a short way in front of the Agent.

• A single yellow arrow will appear to mark the Agent’s new destination.
• Click .
• The Agent will now move to the new destination.

Note: Aliens or hostile units may be encountered at any time. Beware: ensure you keep an eye
There are two ways to select an Agent from the current squad. on your Agents!

• Click on any of the four Agent Icons on the right of the Control Panel; a yellow marker is • To make the selected Agent turn around, move the cursor to a position within the Tactical
now displayed above that Agent in the Isometric Map View. To deselect the other Agents, Display and click the RMB. The Agent will now turn to face in the direction of the cursor.
simply right-click on their Agent icons.
• Move the green cursor box over an unselected Agent in the Isometric Map View; the box THE OVERHEAD MAP
should change to yellow. Click on the Agent. The marker should disappear from the first VIEW
Agent and now appear above the second Agent. Clicking on a single Agent in the Isometric
Map View automatically causes all other Agents to be deselected. Now that we have started to move Agents around the Tactical Area, we will need to be aware
of their position as they continue to move around. For this, we can use the Overhead Map
View.

36
p. p. 37
 Tutorial Two: Tactical Combat

• Click . You will see Yellow arrows on the Map; these are X-COM Agents. Any Red arrows are hostile
units and any Purple arrows represent neutral personnel.
• Click to activate the Overhead Map View.
Solid arrows show units on the present level; large outline arrows show units above the
The Overhead Map View allows you to see more of the Tactical Area on screen. The diamond current level; small outline arrows show units below the current level. The direction of the
shape outline shows the area of the map that will be displayed when you return to the arrow indicates the direction that a unit is facing.
Isometric Map View. As in the Isometric Map View, the Overhead Map View will only show
the areas that your Agents have explored. Note: the map will only show the level of the Tactical Area you have currently selected.

• Click on the buttons or the Level Indicator (in the Control Panel) to display other
levels.
• Scroll the Overhead Map View until the diamond outline surrounds at least one of your
Overhead
Map View
Agents.
• Click again to return to the Isometric Map View.

Switch SEARCHING FOR THE

Map View
ALIENS

As you continue to move your Agents around the Tactical Area, you will encounter stairs,
doors and lifts. To use these, do the following:
• You can scroll the Overhead Map View in the same way as the Isometric Map View;
simply move your cursor to the edge of the screen.
• To go through doors, click inside the room.
• To go up stairs, click at the top of the stairs.
Note: you can also use the cursor keys (on the keyboard) to scroll around the map. • To go down stairs, click at the bottom of the stairs.

38
p. 39
p.
 Tutorial Two: Tactical Combat

• Click . You will see Yellow arrows on the Map; these are X-COM Agents. Any Red arrows are hostile
units and any Purple arrows represent neutral personnel.
• Click to activate the Overhead Map View.
Solid arrows show units on the present level; large outline arrows show units above the
The Overhead Map View allows you to see more of the Tactical Area on screen. The diamond current level; small outline arrows show units below the current level. The direction of the
shape outline shows the area of the map that will be displayed when you return to the arrow indicates the direction that a unit is facing.
Isometric Map View. As in the Isometric Map View, the Overhead Map View will only show
the areas that your Agents have explored. Note: the map will only show the level of the Tactical Area you have currently selected.

• Click on the buttons or the Level Indicator (in the Control Panel) to display other
levels.
• Scroll the Overhead Map View until the diamond outline surrounds at least one of your
Overhead
Map View
Agents.
• Click again to return to the Isometric Map View.

Switch SEARCHING FOR THE

Map View
ALIENS

As you continue to move your Agents around the Tactical Area, you will encounter stairs,
doors and lifts. To use these, do the following:
• You can scroll the Overhead Map View in the same way as the Isometric Map View;
simply move your cursor to the edge of the screen.
• To go through doors, click inside the room.
• To go up stairs, click at the top of the stairs.
Note: you can also use the cursor keys (on the keyboard) to scroll around the map. • To go down stairs, click at the bottom of the stairs.

38
p. 39
p.
 Tutorial Two: Tactical Combat

When one of your Agents sees an Alien, a small Alien indicator will appear above the icon of
that Agent in the Control Panel. Clicking on the ‘Alien Sighted’ Indicators will cause the
display to be centered on the relevant Alien.

Agents will open fire automatically on any Aliens sighted. They will also use any cover
available (within a one-square radius).

Note: if you are playing the Turn-Based Game, you will have to fire on Aliens manually. See
Tutorial Four for full details.
Grav Lift

COMPLETING A TACTICAL
• To use a Grav Lift, move your Agents to the Lift. Select the level you wish to move to and MISSION
then click on this level. Your Agent will move up or down to the selected level using the
Grav Lift. If you successfully manage to kill or stun all Aliens in the Tactical Area, or if all of your Agents
are killed or stunned, then the Tactical Mission will end and you will be taken to the
Debriefing Screen. Here you will be given a score based on how successfully you completed
ENGAGING THE ALIENS
the mission objectives.

• Click OK to return to the Cityscape.

In Tutorials Three and Four, we will use our Saved Game to replay this Tactical Mission.
Tutorial Three will introduce more movement options while Tutorial Four focuses on
Alien Sighted weapons and targeting modes. If you are feeling confident and would like to explore the other
Indicator
controls as you play, then you can jump straight to Tutorial Five which covers resource
management within the Cityscape.

40
p. p. 41
 Tutorial Two: Tactical Combat

When one of your Agents sees an Alien, a small Alien indicator will appear above the icon of
that Agent in the Control Panel. Clicking on the ‘Alien Sighted’ Indicators will cause the
display to be centered on the relevant Alien.

Agents will open fire automatically on any Aliens sighted. They will also use any cover
available (within a one-square radius).

Note: if you are playing the Turn-Based Game, you will have to fire on Aliens manually. See
Tutorial Four for full details.
Grav Lift

COMPLETING A TACTICAL
• To use a Grav Lift, move your Agents to the Lift. Select the level you wish to move to and MISSION
then click on this level. Your Agent will move up or down to the selected level using the
Grav Lift. If you successfully manage to kill or stun all Aliens in the Tactical Area, or if all of your Agents
are killed or stunned, then the Tactical Mission will end and you will be taken to the
Debriefing Screen. Here you will be given a score based on how successfully you completed
ENGAGING THE ALIENS
the mission objectives.

• Click OK to return to the Cityscape.

In Tutorials Three and Four, we will use our Saved Game to replay this Tactical Mission.
Tutorial Three will introduce more movement options while Tutorial Four focuses on
Alien Sighted weapons and targeting modes. If you are feeling confident and would like to explore the other
Indicator
controls as you play, then you can jump straight to Tutorial Five which covers resource
management within the Cityscape.

40
p. p. 41
 TUTORIAL THREE:
TACTICAL COMBAT
(ADVANCED MOVEMENT)

In this, the Third Tutorial, we will replay the Tactical Mission we started in Tutorial Two. Here
we will learn to use some of the more advanced movement options available to you during RUNNING
Tactical Combat Missions.

Firstly you must load the game you saved in Tutorial Two. Agent movement is not restricted to walking. Sometimes your Agents will need to cover
ground very quickly, when they are retreating or moving into cover. In this instance, you can
• Click Load Game from either the Main Menu or the Options screen. Select the saved order your Agents to run.
game from the list and the Tactical Mission will be restored.
• Click to start time moving.
We have already leaned how to move our Agents around the map, so let’s look at the different • Double-click on the Squad Icon to select all Agents in that Squad.
movement modes they can use.
• Click to order the selected Agents to run.
• Click a destination. All of the Agents should run to that destination. Be careful not to make
you Agents run too much; running expends more energy than walking—don’t exhaust
your Agents!

Note: Agents will not be able to fire at enemy units while they are running.
Crawl Walk
• Click to return your Agents to walking speed.

When squads or multiple Agents are selected, then any movement orders given, will apply to
Kneel Run
them all. If you want an order to apply specifically to one Agent, then ensure that only that
Agent is selected.

Note: in the Turn-Based game, running will expend fewer Time Units than walking.

42
p. p. 43
 TUTORIAL THREE:
TACTICAL COMBAT
(ADVANCED MOVEMENT)

In this, the Third Tutorial, we will replay the Tactical Mission we started in Tutorial Two. Here
we will learn to use some of the more advanced movement options available to you during RUNNING
Tactical Combat Missions.

Firstly you must load the game you saved in Tutorial Two. Agent movement is not restricted to walking. Sometimes your Agents will need to cover
ground very quickly, when they are retreating or moving into cover. In this instance, you can
• Click Load Game from either the Main Menu or the Options screen. Select the saved order your Agents to run.
game from the list and the Tactical Mission will be restored.
• Click to start time moving.
We have already leaned how to move our Agents around the map, so let’s look at the different • Double-click on the Squad Icon to select all Agents in that Squad.
movement modes they can use.
• Click to order the selected Agents to run.
• Click a destination. All of the Agents should run to that destination. Be careful not to make
you Agents run too much; running expends more energy than walking—don’t exhaust
your Agents!

Note: Agents will not be able to fire at enemy units while they are running.
Crawl Walk
• Click to return your Agents to walking speed.

When squads or multiple Agents are selected, then any movement orders given, will apply to
Kneel Run
them all. If you want an order to apply specifically to one Agent, then ensure that only that
Agent is selected.

Note: in the Turn-Based game, running will expend fewer Time Units than walking.

42
p. p. 43
 Tutorial Three: Tactical Combat (Advanced Movement)

Kneeling functions differently from Walking, Running and Crawling as it is a position that
CRAWLING your Agents will adopt once they have reached their destination.

• Click to return your Agent to a standing position.

In X-COM: Apocalypse, it is essential for Agents to use cover. You must learn to position and
move your Agents strategically within the Tactical Area. Agents can use many features of the Note: in the Turn-Based game, both kneeling and standing will use an Agent’s Time Units; if
Tactical Area for cover, by Crawling to positions and Kneeling behind them. you intend to kneel at the end of each move, then you must reserve enough Time Units to
do so.
• Select an Agent.
• Click to order your Agent to assume a crawling position. Crawling makes your Agent
a harder target for any hostile units to hit.
• Click on a destination. The Agent will now Crawl to that destination.

Note: in the Turn-Based game, crawling will expend more Time Units than walking.

KNEELING

If there is any cover close to your Agents, move your Agent to that position.

• Click to make the selected Agent kneel. The advantage of kneeling behind cover is that
your Agent is less visible to hostile units and can fire more accurately.

44
p. 45
p.
 Tutorial Three: Tactical Combat (Advanced Movement)

Kneeling functions differently from Walking, Running and Crawling as it is a position that
CRAWLING your Agents will adopt once they have reached their destination.

• Click to return your Agent to a standing position.

In X-COM: Apocalypse, it is essential for Agents to use cover. You must learn to position and
move your Agents strategically within the Tactical Area. Agents can use many features of the Note: in the Turn-Based game, both kneeling and standing will use an Agent’s Time Units; if
Tactical Area for cover, by Crawling to positions and Kneeling behind them. you intend to kneel at the end of each move, then you must reserve enough Time Units to
do so.
• Select an Agent.
• Click to order your Agent to assume a crawling position. Crawling makes your Agent
a harder target for any hostile units to hit.
• Click on a destination. The Agent will now Crawl to that destination.

Note: in the Turn-Based game, crawling will expend more Time Units than walking.

KNEELING

If there is any cover close to your Agents, move your Agent to that position.

• Click to make the selected Agent kneel. The advantage of kneeling behind cover is that
your Agent is less visible to hostile units and can fire more accurately.

44
p. 45
p.
 TUTORIAL FOUR:
TACTICAL COMBAT
(ATTACKING THE ENEMY)

Tutorial Four continues where Tutorial Three left off and concentrates on the Attack Modes Depending on your objectives or strategy, you may wish to change the Attack Mode that your
and Shot-Type controls available to you in Tactical Combat Missions. If you want to reload Agents adopt when exploring the Tactical Area.
your Saved Game, you can do so now—otherwise you will need to continue walking around
the Tactical Area until you encounter some Aliens. • Select an Agent.
• Click . Your Agent will always take the safe option when moving around the Tactical
In the Real-Time game, X-COM Agents will react automatically when hostile units come into
Area (i.e., the Agent will not be aggressive and will seek cover over confrontation).
their line of sight, but how they react is dependent on the orders you give them.
• Select a destination for the Agent to move to.

ATTACK MODES You can order your Agents to be Aggressive or return to Cautious behavior as, and when,
your circumstances change. Experiment with Attack Modes as you move around the Tactical
Area.

• Click to return your Agent to a Cautious approach.

Cautious
SHOT-TYPES
Safe Aggressive

Note: in the Turn-Based game, Attack Mode “orders” only have effect in Opportunity Fire Aimed-Shot Snap-Shot
(more on this later). If you are playing the Turn-Based game, skip this section and turn to
Firing In The Turn-Based Game.
No Shot Auto-Shot

46
p. 47
p.
 TUTORIAL FOUR:
TACTICAL COMBAT
(ATTACKING THE ENEMY)

Tutorial Four continues where Tutorial Three left off and concentrates on the Attack Modes Depending on your objectives or strategy, you may wish to change the Attack Mode that your
and Shot-Type controls available to you in Tactical Combat Missions. If you want to reload Agents adopt when exploring the Tactical Area.
your Saved Game, you can do so now—otherwise you will need to continue walking around
the Tactical Area until you encounter some Aliens. • Select an Agent.
• Click . Your Agent will always take the safe option when moving around the Tactical
In the Real-Time game, X-COM Agents will react automatically when hostile units come into
Area (i.e., the Agent will not be aggressive and will seek cover over confrontation).
their line of sight, but how they react is dependent on the orders you give them.
• Select a destination for the Agent to move to.

ATTACK MODES You can order your Agents to be Aggressive or return to Cautious behavior as, and when,
your circumstances change. Experiment with Attack Modes as you move around the Tactical
Area.

• Click to return your Agent to a Cautious approach.

Cautious
SHOT-TYPES
Safe Aggressive

Note: in the Turn-Based game, Attack Mode “orders” only have effect in Opportunity Fire Aimed-Shot Snap-Shot
(more on this later). If you are playing the Turn-Based game, skip this section and turn to
Firing In The Turn-Based Game.
No Shot Auto-Shot

46
p. 47
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

In conjunction with Attack Mode, you should also give Agents weapon orders. The game will pause and show a message whenever a hostile unit is sighted by one of your
Agents. It is recommended that you take advantage of this to reorder your Agents to cope
• Click to make your Agent favor an Aimed-Shot. with the new situation. Giving your Agents regularly updated orders will keep them alive
longer!
The Aimed-Shot is more accurate than the Snap or Auto-Shots, but the rate of fire is slower.
Should multiple hostile units appear, it is possible to direct your Agents’ fire on a particular
• Now, select and give your other Agents different orders. Experiment with different target.
combinations and see what happens.
• Move your cursor over the hostile unit—it will now change to a white target cursor.
• Clicking will prevent your Agents from firing. This can be useful if you haven’t much
ammo. • Right-click on the hostile unit. Red target cross hairs will now remain on the targeted unit.

Note: the ammo indicator is the vertical bar down the side of each hand in the Control Panel. Note: you can prevent the game from pausing by switching the Messages Panel off. You can
turn messages on or off from the Options Screen. Active Messages are accompanied by a
As with Attack Modes, these orders affect all selected Agents. When single Agents are being Tick. To switch a message off, click on the Tick and a Cross will appear in its place indicating
controlled, the other Agents in the squad retain their previous orders. that the message is now disabled. All messages will still appear in the Message Bar but will
not cause the game to pause when they appear.
USING COVER AND
TARGETING THE ALIENS

To play X-COM: Apocalypse effectively, it is recommended that you place your Agents as
strategically as possible to get the greatest benefit from cover. You should give them the best
opportunity to use cover by placing them near to it; Agents can then duck in and out of cover
or Kneel behind it. For ambushes, try to use areas where Agents can only be attacked from
one direction. Also, where possible, use Agents to cover each other.

48
p. 49
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

In conjunction with Attack Mode, you should also give Agents weapon orders. The game will pause and show a message whenever a hostile unit is sighted by one of your
Agents. It is recommended that you take advantage of this to reorder your Agents to cope
• Click to make your Agent favor an Aimed-Shot. with the new situation. Giving your Agents regularly updated orders will keep them alive
longer!
The Aimed-Shot is more accurate than the Snap or Auto-Shots, but the rate of fire is slower.
Should multiple hostile units appear, it is possible to direct your Agents’ fire on a particular
• Now, select and give your other Agents different orders. Experiment with different target.
combinations and see what happens.
• Move your cursor over the hostile unit—it will now change to a white target cursor.
• Clicking will prevent your Agents from firing. This can be useful if you haven’t much
ammo. • Right-click on the hostile unit. Red target cross hairs will now remain on the targeted unit.

Note: the ammo indicator is the vertical bar down the side of each hand in the Control Panel. Note: you can prevent the game from pausing by switching the Messages Panel off. You can
turn messages on or off from the Options Screen. Active Messages are accompanied by a
As with Attack Modes, these orders affect all selected Agents. When single Agents are being Tick. To switch a message off, click on the Tick and a Cross will appear in its place indicating
controlled, the other Agents in the squad retain their previous orders. that the message is now disabled. All messages will still appear in the Message Bar but will
not cause the game to pause when they appear.
USING COVER AND
TARGETING THE ALIENS

To play X-COM: Apocalypse effectively, it is recommended that you place your Agents as
strategically as possible to get the greatest benefit from cover. You should give them the best
opportunity to use cover by placing them near to it; Agents can then duck in and out of cover
or Kneel behind it. For ambushes, try to use areas where Agents can only be attacked from
one direction. Also, where possible, use Agents to cover each other.

48
p. 49
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

FIRING IN THE • To select a weapon, click on one of the Agent’s hands. The cursor will change to a white
TURN-BASED GAME Target Cursor. Move the Target Cursor over the hostile unit—it will turn red indicating that
it is positioned over a potential target.

If you encounter a hostile unit, you should use a weapon against it before it gets a chance to
fire.

First, select the Shot-Type you wish to use from the three options.

• Click for an Aimed-Shot in the target’s general direction.

Targeted Alien
Now that we have chosen the Shot-Type, we can fire at the enemy (as long as the Agent is
carrying a loaded gun).

• Move the cursor over the hostile unit and target cross hairs will appear.
• Click the RMB to fire.

If you are carrying two weapons and only wish to fire one, you must first select that weapon • Click on the target using the LMB. Your Agent will now fire the weapon at the target.
before firing.
Now one of three things will happen:

1) The Agent fires a shot and misses. This is unfortunate but is expected—initially all of your
Agents are Rookies. You will find that your Agents will become more accurate as they fight
Left Hand Right Hand
more battles.
Ammo Type
Accuracy Display
Remaining
Ammo

50
p. p. 51
 Tutorial Four: Tactical Combat (Attacking The Enemy)

FIRING IN THE • To select a weapon, click on one of the Agent’s hands. The cursor will change to a white
TURN-BASED GAME Target Cursor. Move the Target Cursor over the hostile unit—it will turn red indicating that
it is positioned over a potential target.

If you encounter a hostile unit, you should use a weapon against it before it gets a chance to
fire.

First, select the Shot-Type you wish to use from the three options.

• Click for an Aimed-Shot in the target’s general direction.

Targeted Alien
Now that we have chosen the Shot-Type, we can fire at the enemy (as long as the Agent is
carrying a loaded gun).

• Move the cursor over the hostile unit and target cross hairs will appear.
• Click the RMB to fire.

If you are carrying two weapons and only wish to fire one, you must first select that weapon • Click on the target using the LMB. Your Agent will now fire the weapon at the target.
before firing.
Now one of three things will happen:

1) The Agent fires a shot and misses. This is unfortunate but is expected—initially all of your
Agents are Rookies. You will find that your Agents will become more accurate as they fight
Left Hand Right Hand
more battles.
Ammo Type
Accuracy Display
Remaining
Ammo

50
p. p. 51
 Tutorial Four: Tactical Combat (Attacking The Enemy)

2) The Agent hits the hostile unit with the shot. Aliens can be very tough, so don’t be • Click on the grenade to bring up the Prime Grenade ‘window.’
surprised if they don’t die from the first hit.
3) The hostile unit fires back. If this happens, pray that it does not hit your Agent and that
your next shot kills it.
• You can continue to fire by clicking the Left Mouse Button or cancel firing by clicking the
Right Mouse Button. Slider Bar

Note: firing in the Turn-Based Game causes Agents to use Time Units. Cancel Priming
The Grenade

USING EQUIPMENT
• Click and drag the Slider Bar, in the Prime Grenade ‘window,’ to the left or right to set the
Agents can be equipped with weapons other than guns. You may prefer to attack with a grenade to detonate in “3 secs.”
grenade or use a grenade to clear an area of cover.
Note: in the Turn-Based game, slide the Bar left or right until it reads “End of Turn.” This
• Click from the Control Panel to take you to the Equip Agent Screen. means the grenade will detonate at the end of the X-COM Turn.

• Click on a grenade to pick it up. Keep the Left Mouse Button depressed and drag and drop • Click the Tick icon to accept the grenade settings.
the Megapol AP Grenade to an empty hand.
• Click OK again to return you to the Isometric Map View. Note: you can click the Cross icon to cancel priming the grenade.

Note: Turn-Based players! Check your Time Units before you use the grenade, as you may Each hand is accompanied by two buttons, (throw) and (drop). Because of the three-
not have enough left! If you have run out, click . When it is your Turn again, all of your second detonation time (in the Real-Time game), it is better to throw the grenade. You don’t
Agent’s Time Units will be replenished. want to blow up one of your own Agents!

52
p. p. 53
 Tutorial Four: Tactical Combat (Attacking The Enemy)

2) The Agent hits the hostile unit with the shot. Aliens can be very tough, so don’t be • Click on the grenade to bring up the Prime Grenade ‘window.’
surprised if they don’t die from the first hit.
3) The hostile unit fires back. If this happens, pray that it does not hit your Agent and that
your next shot kills it.
• You can continue to fire by clicking the Left Mouse Button or cancel firing by clicking the
Right Mouse Button. Slider Bar

Note: firing in the Turn-Based Game causes Agents to use Time Units. Cancel Priming
The Grenade

USING EQUIPMENT
• Click and drag the Slider Bar, in the Prime Grenade ‘window,’ to the left or right to set the
Agents can be equipped with weapons other than guns. You may prefer to attack with a grenade to detonate in “3 secs.”
grenade or use a grenade to clear an area of cover.
Note: in the Turn-Based game, slide the Bar left or right until it reads “End of Turn.” This
• Click from the Control Panel to take you to the Equip Agent Screen. means the grenade will detonate at the end of the X-COM Turn.

• Click on a grenade to pick it up. Keep the Left Mouse Button depressed and drag and drop • Click the Tick icon to accept the grenade settings.
the Megapol AP Grenade to an empty hand.
• Click OK again to return you to the Isometric Map View. Note: you can click the Cross icon to cancel priming the grenade.

Note: Turn-Based players! Check your Time Units before you use the grenade, as you may Each hand is accompanied by two buttons, (throw) and (drop). Because of the three-
not have enough left! If you have run out, click . When it is your Turn again, all of your second detonation time (in the Real-Time game), it is better to throw the grenade. You don’t
Agent’s Time Units will be replenished. want to blow up one of your own Agents!

52
p. p. 53
 Tutorial Four: Tactical Combat (Attacking The Enemy)

• Click next to the hand containing the grenade. OPPORTUNITY FIRE

(TURN-BASED GAME ONLY)
• Click a target in the Isometric Map View. The grenade will now be thrown there. After
three seconds (or at the end of the Turn in the Turn-Based Game), it will detonate,
clearing whatever is in that area. Opportunity Fire is a slight exception to the Turn-Based rule. It allows you to end your Turn
leaving Agents with enough Time Units to fire a shot. Your Agents can automatically fire
If an Agent already has a grenade in his or her hand and you need him or her to throw it during the Alien’s turn at any hostile unit who strays into their line of sight.
quickly, simply select the grenade with the RMB in the Hands Area. Click a target in the
Isometric Map View. The grenade will now be thrown at its intended target and explode on The way an Agent behaves during Opportunity Fire depends on the Attack Mode you select.
contact with the floor. You can make the Agent more likely to fire or hide depending on these Attack Modes.

• Click to order your Agents to proceed aggressively. Agents are more confrontational
RETRIEVING EQUIPMENT
FROM THE TACTICAL AREA using this Attack Mode and more likely to shoot in Opportunity Fire.

RESERVING TIME UNITS

If you complete a Tactical Combat Mission successfully and kill or stun all of the Aliens, then You must reserve enough Time Units for your Agents to take full advantage of Opportunity
you will automatically retrieve all of the items left by the Aliens. Fire. In this case we will reserve enough for an Aimed-Shot.

If, however, you decide to evacuate the Tactical Area before you have killed all of the Aliens, • Click . Now this is selected, the Agent will always retain enough Time Units to
then you will have to pick up Alien Artifacts manually. perform an Aimed-Shot in the event of Opportunity Fire.

• After you have successfully killed an Alien, position an Agent over the equipment dropped • Click to end the Turn.
near the corpse.
• Click to open the Equip Agent Screen. Any objects that are on the floor will be
displayed in the Item Menu at the bottom of the screen. Use the drag and drop method to
collect these items. Drop them into any spare carrying space your Agent may have.

It is important to retrieve Alien technology so that you can research it when you return to
Base.

54
p. 55
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

• Click next to the hand containing the grenade. OPPORTUNITY FIRE

(TURN-BASED GAME ONLY)
• Click a target in the Isometric Map View. The grenade will now be thrown there. After
three seconds (or at the end of the Turn in the Turn-Based Game), it will detonate,
clearing whatever is in that area. Opportunity Fire is a slight exception to the Turn-Based rule. It allows you to end your Turn
leaving Agents with enough Time Units to fire a shot. Your Agents can automatically fire
If an Agent already has a grenade in his or her hand and you need him or her to throw it during the Alien’s turn at any hostile unit who strays into their line of sight.
quickly, simply select the grenade with the RMB in the Hands Area. Click a target in the
Isometric Map View. The grenade will now be thrown at its intended target and explode on The way an Agent behaves during Opportunity Fire depends on the Attack Mode you select.
contact with the floor. You can make the Agent more likely to fire or hide depending on these Attack Modes.

• Click to order your Agents to proceed aggressively. Agents are more confrontational
RETRIEVING EQUIPMENT
FROM THE TACTICAL AREA using this Attack Mode and more likely to shoot in Opportunity Fire.

RESERVING TIME UNITS

If you complete a Tactical Combat Mission successfully and kill or stun all of the Aliens, then You must reserve enough Time Units for your Agents to take full advantage of Opportunity
you will automatically retrieve all of the items left by the Aliens. Fire. In this case we will reserve enough for an Aimed-Shot.

If, however, you decide to evacuate the Tactical Area before you have killed all of the Aliens, • Click . Now this is selected, the Agent will always retain enough Time Units to
then you will have to pick up Alien Artifacts manually. perform an Aimed-Shot in the event of Opportunity Fire.

• After you have successfully killed an Alien, position an Agent over the equipment dropped • Click to end the Turn.
near the corpse.
• Click to open the Equip Agent Screen. Any objects that are on the floor will be
displayed in the Item Menu at the bottom of the screen. Use the drag and drop method to
collect these items. Drop them into any spare carrying space your Agent may have.

It is important to retrieve Alien technology so that you can research it when you return to
Base.

54
p. 55
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

If Agents are injured, you may well want them to leave the Tactical Area in order to seek
COMPLETING TACTICAL
COMBAT MISSIONS medical attention.

• Select the Exit Point as the destination for your Agents, and they will walk out of the
Now that you are used to ordering your Agents, try moving them around the building to Tactical Area automatically.
explore some of the rooms and walkways. But beware! You never know what’s lurking around
the next corner. Note: if you leave the Tactical Area without killing all hostile units or retrieving any Alien
artifacts, you will receive a lower score in the Debriefing.
The Tactical Combat Mission will end under any of the following circumstances:
1. All Hostile units are unconscious or dead—you win.
2. All X-COM Agents are unconscious or dead—you lose. DEBRIEFING
3. All Hostile units panic and flee the combat area—you win.
4. All Agents leave the Combat Area using Exit Points.
At the end of each Tactical Combat Mission, you will be given a Debriefing. This will inform
For each building there are several Exit Points, all of which are marked by arrows. you if your mission objectives were achieved and calculate a score based on your
performance in various areas.

Exit Point

• Click OK to return to the Cityscape Screen.

56
p. 57
p.
 Tutorial Four: Tactical Combat (Attacking The Enemy)

If Agents are injured, you may well want them to leave the Tactical Area in order to seek
COMPLETING TACTICAL
COMBAT MISSIONS medical attention.

• Select the Exit Point as the destination for your Agents, and they will walk out of the
Now that you are used to ordering your Agents, try moving them around the building to Tactical Area automatically.
explore some of the rooms and walkways. But beware! You never know what’s lurking around
the next corner. Note: if you leave the Tactical Area without killing all hostile units or retrieving any Alien
artifacts, you will receive a lower score in the Debriefing.
The Tactical Combat Mission will end under any of the following circumstances:
1. All Hostile units are unconscious or dead—you win.
2. All X-COM Agents are unconscious or dead—you lose. DEBRIEFING
3. All Hostile units panic and flee the combat area—you win.
4. All Agents leave the Combat Area using Exit Points.
At the end of each Tactical Combat Mission, you will be given a Debriefing. This will inform
For each building there are several Exit Points, all of which are marked by arrows. you if your mission objectives were achieved and calculate a score based on your
performance in various areas.

Exit Point

• Click OK to return to the Cityscape Screen.

56
p. 57
p.
 TUTORIAL FIVE:
RETURNING TO THE
CITYSCAPE

In this, the Final Tutorial, you will learn how to Buy Equipment, Hire and Fire Agents, and You will notice that eight squares are displayed, the first of which contains an aerial
Assign Research. How you manage your Base’s resources will define how well you will be representation of your Base. As you purchase and construct more Bases, these will also be
able to deal with the Alien threat. If you are continuing from any of the previous Tutorials and displayed. The name of the currently selected Base is displayed in the space beneath these
have lost Agents, don’t worry: we will show you how to purchase and recruit right now. squares.

• Click on the aerial representation of your Base and the Cityscape Display will now center
RETURNING TO BASE on your Base. If you have completed this operation quite quickly, you may well see your
craft return and land at the Base.

After completing any Tactical Combat Mission, you will return to the Cityscape. Your Vehicles
and/or Agents will automatically make their way back to their Base. THE BASES SCREEN

• Click the Bases Tab (if it is not already selected) from the Central Information Panel.
• Click from the Bases Tab to take you to the Bases Screen.

Bases Tab The Bases Screen will now appear.

Base List Menu Bar

Information
Panel Base Display

Base Base Screen Buy New Base

58
p. 59
p.
 TUTORIAL FIVE:
RETURNING TO THE
CITYSCAPE

In this, the Final Tutorial, you will learn how to Buy Equipment, Hire and Fire Agents, and You will notice that eight squares are displayed, the first of which contains an aerial
Assign Research. How you manage your Base’s resources will define how well you will be representation of your Base. As you purchase and construct more Bases, these will also be
able to deal with the Alien threat. If you are continuing from any of the previous Tutorials and displayed. The name of the currently selected Base is displayed in the space beneath these
have lost Agents, don’t worry: we will show you how to purchase and recruit right now. squares.

• Click on the aerial representation of your Base and the Cityscape Display will now center
RETURNING TO BASE on your Base. If you have completed this operation quite quickly, you may well see your
craft return and land at the Base.

After completing any Tactical Combat Mission, you will return to the Cityscape. Your Vehicles
and/or Agents will automatically make their way back to their Base. THE BASES SCREEN

• Click the Bases Tab (if it is not already selected) from the Central Information Panel.
• Click from the Bases Tab to take you to the Bases Screen.

Bases Tab The Bases Screen will now appear.

Base List Menu Bar

Information
Panel Base Display

Base Base Screen Buy New Base

58
p. 59
p.
 Tutorial Five - Returning To The Cityscape

Note: time is paused while you are in the Bases Screen. Time will resume only when you • The Base List displays all of X-COM’s current Bases. When you buy items they are
return to the Cityscape. delivered to the selected Base. As you have only one Base at the beginning, it will already
be selected. Any items you buy will be delivered here.

BUYING EQUIPMENT You will need to choose the item type from the Menu Bar. For now, we will assume that we
want to purchase some weapons for X-COM Agents.

One important function accessed from the Bases Screen is the buying and selling of items. • Click from the Menu Bar. A list of Agent Equipment will appear in the Item Menu.

• Click from the Bases Screen to take you into the Buy and Sell Screen; it is from • Use the Scroll Arrows to find the Marsec M4000 Machine Gun in the Item Menu. You will
here that you buy everything to equip your vehicles and Agents. notice that as you move your cursor over items in the list, their statistics will be displayed
in the Information Panel.

Fund Underneath the name there is a Slider Bar. On either side of the Slider Bar there will be two
Adjustment X-COM Funds numbers: the one on the left is the number of that item the supplier has in stock. The figure
on the right is how many X-COM have in their stores, e.g. 10 and 0. The price of the item is
Base List displayed next to the item name; in the case of the M4000, this is $800.

Menu Bar

Information
Panel Slider Bar

Items Menu

60
p. p. 61
 Tutorial Five - Returning To The Cityscape

Note: time is paused while you are in the Bases Screen. Time will resume only when you • The Base List displays all of X-COM’s current Bases. When you buy items they are
return to the Cityscape. delivered to the selected Base. As you have only one Base at the beginning, it will already
be selected. Any items you buy will be delivered here.

BUYING EQUIPMENT You will need to choose the item type from the Menu Bar. For now, we will assume that we
want to purchase some weapons for X-COM Agents.

One important function accessed from the Bases Screen is the buying and selling of items. • Click from the Menu Bar. A list of Agent Equipment will appear in the Item Menu.

• Click from the Bases Screen to take you into the Buy and Sell Screen; it is from • Use the Scroll Arrows to find the Marsec M4000 Machine Gun in the Item Menu. You will
here that you buy everything to equip your vehicles and Agents. notice that as you move your cursor over items in the list, their statistics will be displayed
in the Information Panel.

Fund Underneath the name there is a Slider Bar. On either side of the Slider Bar there will be two
Adjustment X-COM Funds numbers: the one on the left is the number of that item the supplier has in stock. The figure
on the right is how many X-COM have in their stores, e.g. 10 and 0. The price of the item is
Base List displayed next to the item name; in the case of the M4000, this is $800.

Menu Bar

Information
Panel Slider Bar

Items Menu

60
p. p. 61
 Tutorial Five - Returning To The Cityscape

• Drag the Slider Bar to the right until the number ‘4’ is displayed in X-COM’s stores. We • Click OK when you have finished to accept all of your choices and return to the Bases
have now ordered four M4000 machine guns from Marsec. Repeat the same process for Screen.
the Marsec M4000 Gun Clip, but this time order ‘8.’

Next to the Base List you will see a bar showing you how much storage capacity you have HIRING AGENTS
used.

If you’ve suffered any Agent losses during the previous Tutorial, this is where you can recruit
new Agents.
Storage Capacity
Indicator
• Click from the Bases Screen.

Base List Civilians List

While you are on the Buy and Sell Screen, you can select to buy (or sell) as many items as Agent List
you wish, providing you have the funds.

The Total Funds available to you are displayed in the top right corner of the screen. Fund
Adjustments, as a result of buying and selling items, are displayed in the top left corner. A Information Panel Menu Bar
positive figure indicates a profit, while a negative figure shows how much you have spent.

Note: you begin your campaign with limited funds. Watch how you spend them! Your weekly
funding from the Senate can increase or decrease depending on your performance.

62
p. p. 63
 Tutorial Five - Returning To The Cityscape

• Drag the Slider Bar to the right until the number ‘4’ is displayed in X-COM’s stores. We • Click OK when you have finished to accept all of your choices and return to the Bases
have now ordered four M4000 machine guns from Marsec. Repeat the same process for Screen.
the Marsec M4000 Gun Clip, but this time order ‘8.’

Next to the Base List you will see a bar showing you how much storage capacity you have HIRING AGENTS
used.

If you’ve suffered any Agent losses during the previous Tutorial, this is where you can recruit
new Agents.
Storage Capacity
Indicator
• Click from the Bases Screen.

Base List Civilians List

While you are on the Buy and Sell Screen, you can select to buy (or sell) as many items as Agent List
you wish, providing you have the funds.

The Total Funds available to you are displayed in the top right corner of the screen. Fund
Adjustments, as a result of buying and selling items, are displayed in the top left corner. A Information Panel Menu Bar
positive figure indicates a profit, while a negative figure shows how much you have spent.

Note: you begin your campaign with limited funds. Watch how you spend them! Your weekly
funding from the Senate can increase or decrease depending on your performance.

62
p. p. 63
 Tutorial Five - Returning To The Cityscape

You can select the type of personnel that you wish to hire, from the Menu Bar. We will recruit If an Agent is making their way to your Base and you want to check their position, you can
more X-COM Agents—in your fight against the Aliens, it is likely that you will sustain select the Agent from the Agent List in the Agent Tab (Cityscape Screen). The words,
casualties. “Reporting to Base” will be displayed until that Agent reaches the Base. The words ‘Not
assigned to training’ will then be displayed to signal that that Agent is available for duty.
• Click on the different icons in the Menu Bar. Potential X-COM Agents and scientists will
now appear in the Civilians List on the right side of the screen. • Click OK in the Bases Screen to take you back to the Cityscape Screen.
• Click .
• Move your cursor over the Civilians. You can now see the statistics of potential recruits in ASSIGNING RESEARCH
the Information Panel.
• Click on the Civilians with the best statistics. These will now be transferred to the Agent Next, we will assign X-COM Biochemists on a Biochemistry research project. We
List (next to the Civilians List). will begin by researching the Bio-Transport Module. Without this item, you will not be able to
transport Aliens back from Tactical Combat Missions.
The bar next to the Base List shows you how much living space you have in use. As you take
on new Agents, you should keep an eye on this bar. As you run out of living space, you Research and
should be thinking about building more Living Quarters. Biochemistry Tab Manufacture

• Click OK to hire your new recruits and leave this screen.

The X-COM Agents will now be recruited.

There is a short delay before new recruits start active service, as they have to travel to your
Base. You can use the Time Controls in the Cityscape Screen to speed up the process.

64
p. 65
p.
 Tutorial Five - Returning To The Cityscape

You can select the type of personnel that you wish to hire, from the Menu Bar. We will recruit If an Agent is making their way to your Base and you want to check their position, you can
more X-COM Agents—in your fight against the Aliens, it is likely that you will sustain select the Agent from the Agent List in the Agent Tab (Cityscape Screen). The words,
casualties. “Reporting to Base” will be displayed until that Agent reaches the Base. The words ‘Not
assigned to training’ will then be displayed to signal that that Agent is available for duty.
• Click on the different icons in the Menu Bar. Potential X-COM Agents and scientists will
now appear in the Civilians List on the right side of the screen. • Click OK in the Bases Screen to take you back to the Cityscape Screen.
• Click .
• Move your cursor over the Civilians. You can now see the statistics of potential recruits in ASSIGNING RESEARCH
the Information Panel.
• Click on the Civilians with the best statistics. These will now be transferred to the Agent Next, we will assign X-COM Biochemists on a Biochemistry research project. We
List (next to the Civilians List). will begin by researching the Bio-Transport Module. Without this item, you will not be able to
transport Aliens back from Tactical Combat Missions.
The bar next to the Base List shows you how much living space you have in use. As you take
on new Agents, you should keep an eye on this bar. As you run out of living space, you Research and
should be thinking about building more Living Quarters. Biochemistry Tab Manufacture

• Click OK to hire your new recruits and leave this screen.

The X-COM Agents will now be recruited.

There is a short delay before new recruits start active service, as they have to travel to your
Base. You can use the Time Controls in the Cityscape Screen to speed up the process.

64
p. 65
p.
 Tutorial Five - Returning To The Cityscape

• Click on the Biochemistry Tab in the Central Information Panel. Clicking any of the As you have entered the Research Screen via the Biochemists Tab, the Biochemistry Lab will
Biochemists will reveal their names and the details of any project they are currently automatically be selected.
working on. As we have yet to assign any of our Biochemists to a project, they will be
flagged as ‘Not assigned to lab’. • Click on the other labs in the Facilities Menu. You will notice that as you click between the
different labs, the list of Available Personnel will change.
• Click and you will be taken to the Research and Manufacture Screen.
• Select the Biochemistry laboratory again from the Facilities Menu.
Note: you can also get to this screen by clicking in the Bases Screen.
A list of Biochemists will appear in the Available Personnel List, underneath the Base List.
“No Project” should now be written in the Information Panel.

Base List Facilities Menu • Before you assign scientists, you must first select a project.
• Click to open the Project Screen.
Information
Panel
At the beginning of the game, the only project listed on the Project Screen will be the Bio-
Available
Personnel List Menu Bar Transport Module.

Assigned • Move the cursor over the text “Bio-Transport Module.” A brief project description will
Personnel List
appear at the bottom of the screen. Click to highlight the project.
• Click OK to return to the Research and Manufacturing Screen.

The Base List displays your Bases. When a Base is selected, any Labs and Workshops at that The name of the project will now be listed in the Information Panel along with a progress bar.
Base are displayed in the Facilities Menu. As you have only one Base at the beginning of the
game, the labs and workshops at this Base are automatically displayed in the Facilities Next you must assign a project team.
Menu.

66
p. p. 67
 Tutorial Five - Returning To The Cityscape

• Click on the Biochemistry Tab in the Central Information Panel. Clicking any of the As you have entered the Research Screen via the Biochemists Tab, the Biochemistry Lab will
Biochemists will reveal their names and the details of any project they are currently automatically be selected.
working on. As we have yet to assign any of our Biochemists to a project, they will be
flagged as ‘Not assigned to lab’. • Click on the other labs in the Facilities Menu. You will notice that as you click between the
different labs, the list of Available Personnel will change.
• Click and you will be taken to the Research and Manufacture Screen.
• Select the Biochemistry laboratory again from the Facilities Menu.
Note: you can also get to this screen by clicking in the Bases Screen.
A list of Biochemists will appear in the Available Personnel List, underneath the Base List.
“No Project” should now be written in the Information Panel.

Base List Facilities Menu • Before you assign scientists, you must first select a project.
• Click to open the Project Screen.
Information
Panel
At the beginning of the game, the only project listed on the Project Screen will be the Bio-
Available
Personnel List Menu Bar Transport Module.

Assigned • Move the cursor over the text “Bio-Transport Module.” A brief project description will
Personnel List
appear at the bottom of the screen. Click to highlight the project.
• Click OK to return to the Research and Manufacturing Screen.

The Base List displays your Bases. When a Base is selected, any Labs and Workshops at that The name of the project will now be listed in the Information Panel along with a progress bar.
Base are displayed in the Facilities Menu. As you have only one Base at the beginning of the
game, the labs and workshops at this Base are automatically displayed in the Facilities Next you must assign a project team.
Menu.

66
p. p. 67
 Tutorial Five - Returning To The Cityscape

• Click all of the scientists in the Available Personnel List to Assign them to the new
project. As you select them, they will appear in the Assigned Personnel List (bottom right
of the screen). Base List

Note: clicking on a person in the Assigned Personnel List will release them from their Base Display
Information
current project assignment. They will now be transferred to the Available Personnel List. Panel

• Click OK to leave the Research and Manufacture Screen once you have finished.
Facilities Menu Bar
Menu
BUILD NEW BASE
FACILITIES
• Move the cursor to the Facilities Menu at the bottom of the Bases Screen.
As the scope of X-COM’s operations increases, so too does the need to increase the size of
• Move the cursor over the facilities; a white box will highlight your selection. Details of that
the facilities available to X-COM. Facilities take time to build, so you will want to plan your
facility will appear in the Information Panel: the Facility Name, Cost to Build, Days to
needs for the near future, at the beginning of the game.
Build and Maintenance Costs.
Note: as the game progresses, you will be able to research better facilities, some of which
may be based on Alien technology.

• Click the Bases Tab.

• Click to open the Bases Screen.

Located at the foot of the Bases Screen is a scrolling list of available Base facilities. For the
Dragging
moment we will want to build Stores, Living Quarters and another Biochemistry Lab. This a Facility
way we can accommodate more scientists and have somewhere to store new weapons and
equipment.

68
p. p. 69
 Tutorial Five - Returning To The Cityscape

• Click all of the scientists in the Available Personnel List to Assign them to the new
project. As you select them, they will appear in the Assigned Personnel List (bottom right
of the screen). Base List

Note: clicking on a person in the Assigned Personnel List will release them from their Base Display
Information
current project assignment. They will now be transferred to the Available Personnel List. Panel

• Click OK to leave the Research and Manufacture Screen once you have finished.
Facilities Menu Bar
Menu
BUILD NEW BASE
FACILITIES
• Move the cursor to the Facilities Menu at the bottom of the Bases Screen.
As the scope of X-COM’s operations increases, so too does the need to increase the size of
• Move the cursor over the facilities; a white box will highlight your selection. Details of that
the facilities available to X-COM. Facilities take time to build, so you will want to plan your
facility will appear in the Information Panel: the Facility Name, Cost to Build, Days to
needs for the near future, at the beginning of the game.
Build and Maintenance Costs.
Note: as the game progresses, you will be able to research better facilities, some of which
may be based on Alien technology.

• Click the Bases Tab.

• Click to open the Bases Screen.

Located at the foot of the Bases Screen is a scrolling list of available Base facilities. For the
Dragging
moment we will want to build Stores, Living Quarters and another Biochemistry Lab. This a Facility
way we can accommodate more scientists and have somewhere to store new weapons and
equipment.

68
p. p. 69
 Tutorial Five - Returning To The Cityscape

• Drag and drop the Stores to the desired location on your Base Display (in the middle of
the screen). WHAT HAPPENS NEXT?

Note: you can only build a Base facility over an existing corridor.
• Click in the Time Controls. One of three events will now happen:
The new facility will now be shown on the Base Display, displaying the number of
construction days remaining before it is completed. 1. Another ‘Alert’ may occur. Follow the steps in Tutorial One to deploy your Agents to an
Alert Site.
Note: if you wish to abort the ‘build facility’ operation, you must release the mouse button 2. UFOs may appear within the City; for full details on intercepting UFOs, refer to Intercepting
before you have ‘dragged’ the facility to the Base Display. ‘Dropping’ the Base facility Hostile Vehicles in the X-COM Vehicles Tab section of this manual.
anywhere outside the Base Display will cause the operation to be cancelled.
3. A report may appear providing feedback on your performance to date. A daily report is
• Move the cursor back to the facilities list at the bottom of the screen. supplied as well as a weekly summary.

• Drag and drop the Living Quarters to the desired location on your Base Display. Other messages may appear to inform you that your research is complete or other events are
• Repeat the process for the Biochemistry Lab. occurring around the city.

Note: you can right-click on any of the facilities in the Facilities Menu to view the UFOpaedia THE END OF THE
entry. This feature is also available in other areas of the game, such as the Equipping TUTORIAL
Screens.
Much of the enjoyment of X-COM: Apocalypse is in discovering new technology, gathering
• Click OK in the Bases Screen to take you back to the Cityscape Screen.
information about Aliens and combating them through the many different city and Alien
locations.

70
p. p. 71
 Tutorial Five - Returning To The Cityscape

• Drag and drop the Stores to the desired location on your Base Display (in the middle of
the screen). WHAT HAPPENS NEXT?

Note: you can only build a Base facility over an existing corridor.
• Click in the Time Controls. One of three events will now happen:
The new facility will now be shown on the Base Display, displaying the number of
construction days remaining before it is completed. 1. Another ‘Alert’ may occur. Follow the steps in Tutorial One to deploy your Agents to an
Alert Site.
Note: if you wish to abort the ‘build facility’ operation, you must release the mouse button 2. UFOs may appear within the City; for full details on intercepting UFOs, refer to Intercepting
before you have ‘dragged’ the facility to the Base Display. ‘Dropping’ the Base facility Hostile Vehicles in the X-COM Vehicles Tab section of this manual.
anywhere outside the Base Display will cause the operation to be cancelled.
3. A report may appear providing feedback on your performance to date. A daily report is
• Move the cursor back to the facilities list at the bottom of the screen. supplied as well as a weekly summary.

• Drag and drop the Living Quarters to the desired location on your Base Display. Other messages may appear to inform you that your research is complete or other events are
• Repeat the process for the Biochemistry Lab. occurring around the city.

Note: you can right-click on any of the facilities in the Facilities Menu to view the UFOpaedia THE END OF THE
entry. This feature is also available in other areas of the game, such as the Equipping TUTORIAL
Screens.
Much of the enjoyment of X-COM: Apocalypse is in discovering new technology, gathering
• Click OK in the Bases Screen to take you back to the Cityscape Screen.
information about Aliens and combating them through the many different city and Alien
locations.

70
p. p. 71
 Tutorial Five - Returning To The Cityscape

These Tutorials form a basic guide to X-COM: Apocalypse. Use the Reference Guide section By using tactics, you are more likely to make efficient use of the resources available to you.
of this manual for details of specific menu options or game features. For atmosphere and
background, browse through the X-COM Rookies’ Guide included in your package. 3. Develop Powerful Squads
Agents are an expensive and limited resource; it is better to have a number of squads that
stay alive than to have a squad whose members have to be replaced at the end of each
PLAYING TIPS Tactical Combat Mission. Don’t allow your Agents to take unnecessary risks on missions; you
will find they fight better when they are more experienced. Equip your squad with the best
weapons available and avoid exposing your Agents to enemy fire by keeping them in cover.
To succeed in the war against the Aliens, you will need to carry out the following:
4. Plan Your Research Carefully
1. Establish More Bases Around the City Concentrate research on developing Alien-based technologies and take care that your
For quick deployment of Agents to all areas of the city, you will need a wide spread of Bases. scientists stay busy. Idle scientists are an expensive commodity—you cannot afford to waste
The quicker your Agents can reach the site of Alien activity, the more likely they are to catch any of your resources or time.
Aliens and collect Alien artifacts, both of which are vital to X-COM’s success.
5. Build New Weapons and Vehicles Based on Alien Technology
It is vital that you select Bases that are going to be big enough for your needs—the Base will If your scientists have researched Alien items, your engineers will be able to reproduce them.
always be limited by space, so plan for expansion when choosing Base Sites. X-COM will eventually be using the most advanced weaponry on Earth, fighting the Aliens
with their own technology!
2. Build More Base Facilities at your Bases
Experiment with different-sized Bases and also consider different Base functions. You may Good Luck!
decide you want six Bases around the city that are solely designed to deploy Agents—in this
case you will need plenty of Stores, Vehicle Repair Bays and Living Quarters or you may want
to centralize all of your research of a given type at one Base, so at this site you will have
many laboratories and living quarters.

72
p. 73
p.
 Tutorial Five - Returning To The Cityscape

These Tutorials form a basic guide to X-COM: Apocalypse. Use the Reference Guide section By using tactics, you are more likely to make efficient use of the resources available to you.
of this manual for details of specific menu options or game features. For atmosphere and
background, browse through the X-COM Rookies’ Guide included in your package. 3. Develop Powerful Squads
Agents are an expensive and limited resource; it is better to have a number of squads that
stay alive than to have a squad whose members have to be replaced at the end of each
PLAYING TIPS Tactical Combat Mission. Don’t allow your Agents to take unnecessary risks on missions; you
will find they fight better when they are more experienced. Equip your squad with the best
weapons available and avoid exposing your Agents to enemy fire by keeping them in cover.
To succeed in the war against the Aliens, you will need to carry out the following:
4. Plan Your Research Carefully
1. Establish More Bases Around the City Concentrate research on developing Alien-based technologies and take care that your
For quick deployment of Agents to all areas of the city, you will need a wide spread of Bases. scientists stay busy. Idle scientists are an expensive commodity—you cannot afford to waste
The quicker your Agents can reach the site of Alien activity, the more likely they are to catch any of your resources or time.
Aliens and collect Alien artifacts, both of which are vital to X-COM’s success.
5. Build New Weapons and Vehicles Based on Alien Technology
It is vital that you select Bases that are going to be big enough for your needs—the Base will If your scientists have researched Alien items, your engineers will be able to reproduce them.
always be limited by space, so plan for expansion when choosing Base Sites. X-COM will eventually be using the most advanced weaponry on Earth, fighting the Aliens
with their own technology!
2. Build More Base Facilities at your Bases
Experiment with different-sized Bases and also consider different Base functions. You may Good Luck!
decide you want six Bases around the city that are solely designed to deploy Agents—in this
case you will need plenty of Stores, Vehicle Repair Bays and Living Quarters or you may want
to centralize all of your research of a given type at one Base, so at this site you will have
many laboratories and living quarters.

72
p. 73
p.
 REFERENCE GUIDE

74
p. 75
p.
 REFERENCE GUIDE

74
p. 75
p.
 Reference Guide

After the Intro Sequence has finished playing, you will be taken to the Main Menu Screen. Position your cursor over the required option and click.

MAIN MENU STARTING A NEW GAME

Select Start Campaign Game from the Main Menu Screen. You will be taken to the Select
Difficulty Screen.

The Main Menu Screen allows you to select between:

Start Campaign Game

Load Game
Quit

76
p. 77
p.
 Reference Guide

After the Intro Sequence has finished playing, you will be taken to the Main Menu Screen. Position your cursor over the required option and click.

MAIN MENU STARTING A NEW GAME

Select Start Campaign Game from the Main Menu Screen. You will be taken to the Select
Difficulty Screen.

The Main Menu Screen allows you to select between:

Start Campaign Game

Load Game
Quit

76
p. 77
p.
 Reference Guide

CITYSCAPE SCREEN

This allows you to change the way the game plays to suit your own ability. Difficulty levels The Cityscape Screen allows you to manage X-COM’s resources and develop your long-term
range from Novice to Superhuman. It is recommended that you complete the game at one of strategy. From here you can buy new Bases, deploy your squads and vehicles to Alert Sites,
the lower levels before attempting to play at Superhuman level. intercept UFOs and much more.

After choosing a difficulty level, you will be taken to the Cityscape Screen (for full details see
the Cityscape Screen section of this manual).
Cityscape Display
LOADING A SAVED
GAME

If you have previously saved a game and wish to resume playing, click this option and then
click on the game you wish to load. You will be taken to the point at which the game was
Control Panel
saved.

The Cityscape Screen is split into two areas: the Cityscape Display and the Control Panel. At
the beginning of the game, the Cityscape Display will be centered on your current Base.
In the Control Panel you will see the Message Bar, a group of Cityscape Options, a display
of the Game Time, the Time Controls and the Central Information Panel (more on the use of
this later).

Cityscape Central Message Game Time and

Options Information Panel Bar Time Controls

78
p. p. 79
 Reference Guide

CITYSCAPE SCREEN

This allows you to change the way the game plays to suit your own ability. Difficulty levels The Cityscape Screen allows you to manage X-COM’s resources and develop your long-term
range from Novice to Superhuman. It is recommended that you complete the game at one of strategy. From here you can buy new Bases, deploy your squads and vehicles to Alert Sites,
the lower levels before attempting to play at Superhuman level. intercept UFOs and much more.

After choosing a difficulty level, you will be taken to the Cityscape Screen (for full details see
the Cityscape Screen section of this manual).
Cityscape Display
LOADING A SAVED
GAME

If you have previously saved a game and wish to resume playing, click this option and then
click on the game you wish to load. You will be taken to the point at which the game was
Control Panel
saved.

The Cityscape Screen is split into two areas: the Cityscape Display and the Control Panel. At
the beginning of the game, the Cityscape Display will be centered on your current Base.
In the Control Panel you will see the Message Bar, a group of Cityscape Options, a display
of the Game Time, the Time Controls and the Central Information Panel (more on the use of
this later).

Cityscape Central Message Game Time and

Options Information Panel Bar Time Controls

78
p. p. 79
 Reference Guide

EXPLORING
MEGA-PRIMUS BUILDINGS SCREEN

Mega-Primus is a vast megalopolis. The Cityscape Display shows only a small area of the Building Investigate Building
for Alien Activity
city at any one time. To see more of the city, we can scroll this display: Information
Raid Building
• Move the mouse cursor to the left edge of the screen. The screen will scroll revealing more
of the city. Move the cursor to the other edges of the screen and explore more of the city.
You will see many of the city’s futuristic buildings, including Corporate HQs, the
Astrodome, Police Stations and even the City Slums.
Agent List Vehicle List

You can also use the cursor keys on the keyboard to scroll the Cityscape Display.

Clicking on any of the buildings in Mega-Primus will open the Buildings Screen.

The Buildings Screen provides you with useful information about who owns the building, its
function, and what Agents and vehicles are at that building. The Buildings Screen consists of:

1. Building Information—The building name and function will appear at the top of the screen.
2. Agent List—The left side of the screen gives you information about all the unassigned
Agents available in the building.
3. Vehicle List—The right of the screen gives a list of all vehicles at the building and the
Agents assigned to them.

80
p. p. 81
 Reference Guide

EXPLORING
MEGA-PRIMUS BUILDINGS SCREEN

Mega-Primus is a vast megalopolis. The Cityscape Display shows only a small area of the Building Investigate Building
for Alien Activity
city at any one time. To see more of the city, we can scroll this display: Information
Raid Building
• Move the mouse cursor to the left edge of the screen. The screen will scroll revealing more
of the city. Move the cursor to the other edges of the screen and explore more of the city.
You will see many of the city’s futuristic buildings, including Corporate HQs, the
Astrodome, Police Stations and even the City Slums.
Agent List Vehicle List

You can also use the cursor keys on the keyboard to scroll the Cityscape Display.

Clicking on any of the buildings in Mega-Primus will open the Buildings Screen.

The Buildings Screen provides you with useful information about who owns the building, its
function, and what Agents and vehicles are at that building. The Buildings Screen consists of:

1. Building Information—The building name and function will appear at the top of the screen.
2. Agent List—The left side of the screen gives you information about all the unassigned
Agents available in the building.
3. Vehicle List—The right of the screen gives a list of all vehicles at the building and the
Agents assigned to them.

80
p. p. 81
 Cityscape Screen

4. Menu Bar—This allows you to select Investigate Building For Alien Activity, Raid • Click on the Agent names you wish to select from the Agent and Vehicle Lists.
Building, Equip Agents and Equip Vehicles.
Note: click the Agent names again to deselect them.
The Buildings Screen can be used for the following purposes:
• Click to start your Raid.
INVESTIGATE BUILDING FOR ALIEN ACTIVITY
ASSIGNING AGENTS TO VEHICLES
When an organization is at risk from Alien Infiltration, you can send Agents to Investigate For
The majority of X-COM investigations take place in the buildings of Mega-Primus. The
Alien Activity at that organization’s building. If Aliens are found or the organization is hostile
Buildings Screen allows you to assign and reassign Agents to vehicles.
to X-COM, then a Tactical Combat Mission will be generated.
• Drag and drop Agent Icons to the desired vehicle in the list. The Agent Icon will now
• Click on the Agent names you wish to select from the Agent and Vehicle Lists.
appear under the vehicle it is assigned to. You can also drag Agents to the Agent List to
leave them in a building (if you want to send your vehicle out to intercept a UFO, without
Note: click the Agent names again to deselect them.
risking any of your Agents).
• Click to begin the investigation.
Note: ‘Dropping’ the person anywhere outside the Vehicle List (i.e., letting go of the Left
Mouse Button) will cause the operation to be cancelled and the person returned to their
RAID BUILDING
previous position.
When X-COM raids a building, they will be placed directly into a Tactical Combat Mission
against Aliens or security forces. The reasons for sending a squad on a raid are:
EQUIPPING AGENTS AND VEHICLES
To equip Agents or Vehicles from the Buildings Screen:
1. Destructive—weaken a hostile organization by damaging their building and killing
personnel.
• Click . You will now be taken to the Equip Agent Screen.
2. To steal any equipment in the building.
• Click . You will now be taken to the Equip Vehicles Screen.

82
p. 83
p.
 Cityscape Screen

4. Menu Bar—This allows you to select Investigate Building For Alien Activity, Raid • Click on the Agent names you wish to select from the Agent and Vehicle Lists.
Building, Equip Agents and Equip Vehicles.
Note: click the Agent names again to deselect them.
The Buildings Screen can be used for the following purposes:
• Click to start your Raid.
INVESTIGATE BUILDING FOR ALIEN ACTIVITY
ASSIGNING AGENTS TO VEHICLES
When an organization is at risk from Alien Infiltration, you can send Agents to Investigate For
The majority of X-COM investigations take place in the buildings of Mega-Primus. The
Alien Activity at that organization’s building. If Aliens are found or the organization is hostile
Buildings Screen allows you to assign and reassign Agents to vehicles.
to X-COM, then a Tactical Combat Mission will be generated.
• Drag and drop Agent Icons to the desired vehicle in the list. The Agent Icon will now
• Click on the Agent names you wish to select from the Agent and Vehicle Lists.
appear under the vehicle it is assigned to. You can also drag Agents to the Agent List to
leave them in a building (if you want to send your vehicle out to intercept a UFO, without
Note: click the Agent names again to deselect them.
risking any of your Agents).
• Click to begin the investigation.
Note: ‘Dropping’ the person anywhere outside the Vehicle List (i.e., letting go of the Left
Mouse Button) will cause the operation to be cancelled and the person returned to their
RAID BUILDING
previous position.
When X-COM raids a building, they will be placed directly into a Tactical Combat Mission
against Aliens or security forces. The reasons for sending a squad on a raid are:
EQUIPPING AGENTS AND VEHICLES
To equip Agents or Vehicles from the Buildings Screen:
1. Destructive—weaken a hostile organization by damaging their building and killing
personnel.
• Click . You will now be taken to the Equip Agent Screen.
2. To steal any equipment in the building.
• Click . You will now be taken to the Equip Vehicles Screen.

82
p. 83
p.
 Cityscape Screen

MESSAGES

Located beneath the Cityscape Display is the Message Bar which informs you of all events in
the city.

MESSAGE BAR

Message History Message Bar Center On

This screen contains a list of messages.

• Click to return to the Cityscape Display. The display will now be centered on the
source of the selected message.
All messages received by X-COM will appear in the Message Bar.
Note: if the subject of the message no longer exists, then clicking will simply return you
• Click to center the Cityscape Display on the source of any message that appears in to the Cityscape Display.
the Message Bar.
When you play your first campaign, any messages received by X-COM will appear in a larger
All of the messages you receive in the Message Bar are stored in the Message History Message Panel. This will overlay the Message Bar and pause the game.
Screen, should you wish to refer to them at a later date.

• Click to take you to the Message History Screen.

84
p. 85
p.
 Cityscape Screen

MESSAGES

Located beneath the Cityscape Display is the Message Bar which informs you of all events in
the city.

MESSAGE BAR

Message History Message Bar Center On

This screen contains a list of messages.

• Click to return to the Cityscape Display. The display will now be centered on the
source of the selected message.
All messages received by X-COM will appear in the Message Bar.
Note: if the subject of the message no longer exists, then clicking will simply return you
• Click to center the Cityscape Display on the source of any message that appears in to the Cityscape Display.
the Message Bar.
When you play your first campaign, any messages received by X-COM will appear in a larger
All of the messages you receive in the Message Bar are stored in the Message History Message Panel. This will overlay the Message Bar and pause the game.
Screen, should you wish to refer to them at a later date.

• Click to take you to the Message History Screen.

84
p. 85
p.
 Cityscape Screen

MESSAGE PANEL • Click the Tick from the Message Panel, and a Cross will appear indicating that the
Message Panel is now disabled. The game will no longer pause every time this particular
message arrives (the message will still appear in the Message Bar).
• You can also disable specific messages from the Options Screen (for full details see
Options Screen later in this chapter).

CITYSCAPE OPTIONS

Continue Center on Message

On the left of the Control Panel, you will see a group of buttons. These are the Cityscape
Options which access various other screens and functions.

VIEWING THE ACTION

When you first start your campaign, the default Camera Mode causes selected vehicles,
The Message Panel allows you to center on the subject of the message or continue with the Agents and hostile units to be automatically tracked as they move around within the
game. Cityscape Display.

• Click to unpause the game and continue the action. • Click to disable tracking. This allows you to center the display anywhere. Notice that
• Click to center the display on the subject of the message and pause the game. the icon will change to show you that tracking is disabled.

If you do not wish the game to pause every time you receive messages, you can deactivate • Click again to turn tracking back on.
the Message Panel:

86
p. p. 87
 Cityscape Screen

MESSAGE PANEL • Click the Tick from the Message Panel, and a Cross will appear indicating that the
Message Panel is now disabled. The game will no longer pause every time this particular
message arrives (the message will still appear in the Message Bar).
• You can also disable specific messages from the Options Screen (for full details see
Options Screen later in this chapter).

CITYSCAPE OPTIONS

Continue Center on Message

On the left of the Control Panel, you will see a group of buttons. These are the Cityscape
Options which access various other screens and functions.

VIEWING THE ACTION

When you first start your campaign, the default Camera Mode causes selected vehicles,
The Message Panel allows you to center on the subject of the message or continue with the Agents and hostile units to be automatically tracked as they move around within the
game. Cityscape Display.

• Click to unpause the game and continue the action. • Click to disable tracking. This allows you to center the display anywhere. Notice that
• Click to center the display on the subject of the message and pause the game. the icon will change to show you that tracking is disabled.

If you do not wish the game to pause every time you receive messages, you can deactivate • Click again to turn tracking back on.
the Message Panel:

86
p. p. 87
 Cityscape Screen

THE ISOMETRIC AND OVERHEAD MAP VIEWS Note: clicking on X-COM Agents or Vehicles in the Overhead Map View will select the
The Cityscape Display always defaults to the Isometric Map View. This view shows real-life corresponding Agent or Vehicle within the appropriate Tab.
objects within Mega-Primus: X-COM vehicles, Buildings, UFOs and Dimension Gates.
ALIEN INFILTRATION GRAPH SCREEN
• Click to change to the Overhead Map View. Knowing when an organization has been taken over is helpful, but more useful is knowing
which organizations are about to fall under Alien control. The Alien Infiltration Graph allows
The Overhead Map View is an important strategic tool; it allows you to see a larger section of you to select an organization and see how far Aliens have infiltrated that organization.
the city. Unlike the Isometric Map View, the Overhead Map View highlights information and
keeps you abreast of present activity—you are able to see at a glance the location of hostile
units, X-COM units and civilians. It is also used to show the waypoints and destinations of all
your vehicles and Agents.

The Overhead Map View uses symbols to represent the following:

X-COM Agents – Yellow “Stick Man”

Graph
X-COM ground craft – Yellow Organizations
X-COM airborne craft – Yellow
Key
Neutral ground craft – Purple
Neutral airborne craft – Purple
Hostile ground craft – Red
Hostile airborne craft – Red • Click to take you to the Alien Infiltration Graph Screen
Building on Alert – Red
On this screen, there is a scrolling list of all organizations operating in Mega-Primus.
White Diamond box—this outlines the area you will see when you return to the Isometric
Map View.

88
p. p.89
 Cityscape Screen

THE ISOMETRIC AND OVERHEAD MAP VIEWS Note: clicking on X-COM Agents or Vehicles in the Overhead Map View will select the
The Cityscape Display always defaults to the Isometric Map View. This view shows real-life corresponding Agent or Vehicle within the appropriate Tab.
objects within Mega-Primus: X-COM vehicles, Buildings, UFOs and Dimension Gates.
ALIEN INFILTRATION GRAPH SCREEN
• Click to change to the Overhead Map View. Knowing when an organization has been taken over is helpful, but more useful is knowing
which organizations are about to fall under Alien control. The Alien Infiltration Graph allows
The Overhead Map View is an important strategic tool; it allows you to see a larger section of you to select an organization and see how far Aliens have infiltrated that organization.
the city. Unlike the Isometric Map View, the Overhead Map View highlights information and
keeps you abreast of present activity—you are able to see at a glance the location of hostile
units, X-COM units and civilians. It is also used to show the waypoints and destinations of all
your vehicles and Agents.

The Overhead Map View uses symbols to represent the following:

X-COM Agents – Yellow “Stick Man”

Graph
X-COM ground craft – Yellow Organizations
X-COM airborne craft – Yellow
Key
Neutral ground craft – Purple
Neutral airborne craft – Purple
Hostile ground craft – Red
Hostile airborne craft – Red • Click to take you to the Alien Infiltration Graph Screen
Building on Alert – Red
On this screen, there is a scrolling list of all organizations operating in Mega-Primus.
White Diamond box—this outlines the area you will see when you return to the Isometric
Map View.

88
p. p.89
 Cityscape Screen

• Click the organization of your choice to see how far it has been infiltrated; the percentage THE UFOPAEDIA
of Alien Infiltration is displayed on the graph. Use the color Key at the bottom of the The UFOpaedia acts as an online encyclopedia which contains all the information currently
screen to see which organizations are displayed on the graph. available to X-COM. Each entry consists of a diagram and all known data.

If the line rises above the critical level (indicated by a line halfway up the graph), then the • Click to take you to the UFOpaedia Screen.
organization is at risk from Alien takeover.

Clicking the button at the top right will automatically select the 10 most infiltrated
organizations.

X-COM PERFORMANCE LOG

This screen allows you to review your score and check your finances.

• Click to take you to the X-COM Performance Log Screen.

• Click from the Menu Bar.

This will give you an appraisal of your current performance in dealing with Alien activity in the
city. You are rated in a number of areas and given an overall weekly score and total score.
This menu screen displays all of the subjects which may be reviewed.
Note: at the end of each day you will automatically be given a report of your progress.
Whenever your cursor is over an object that has informative information displayed abut it in
• Click from the Menu Bar to open the Finance Screen.
an Information Panel, clicking the right mouse button will take you to the UFOpaedia entry for
that object.
This screen provides you with a breakdown of all X-COM expenditure. It lets you know how
much you are spending on Scientists, Engineers and Agents. It also lets you see how much
From the Diplomatic Rift and Offer Settlement screens, it is possible to activate the UFOpaedia
money you are spending to maintain your Bases.
for the relevant organization by pressing 1.
• Click OK to exit this screen.

90
p. p. 91
 Cityscape Screen

• Click the organization of your choice to see how far it has been infiltrated; the percentage THE UFOPAEDIA
of Alien Infiltration is displayed on the graph. Use the color Key at the bottom of the The UFOpaedia acts as an online encyclopedia which contains all the information currently
screen to see which organizations are displayed on the graph. available to X-COM. Each entry consists of a diagram and all known data.

If the line rises above the critical level (indicated by a line halfway up the graph), then the • Click to take you to the UFOpaedia Screen.
organization is at risk from Alien takeover.

Clicking the button at the top right will automatically select the 10 most infiltrated
organizations.

X-COM PERFORMANCE LOG

This screen allows you to review your score and check your finances.

• Click to take you to the X-COM Performance Log Screen.

• Click from the Menu Bar.

This will give you an appraisal of your current performance in dealing with Alien activity in the
city. You are rated in a number of areas and given an overall weekly score and total score.
This menu screen displays all of the subjects which may be reviewed.
Note: at the end of each day you will automatically be given a report of your progress.
Whenever your cursor is over an object that has informative information displayed abut it in
• Click from the Menu Bar to open the Finance Screen.
an Information Panel, clicking the right mouse button will take you to the UFOpaedia entry for
that object.
This screen provides you with a breakdown of all X-COM expenditure. It lets you know how
much you are spending on Scientists, Engineers and Agents. It also lets you see how much
From the Diplomatic Rift and Offer Settlement screens, it is possible to activate the UFOpaedia
money you are spending to maintain your Bases.
for the relevant organization by pressing 1.
• Click OK to exit this screen.

90
p. p. 91
 Cityscape Screen

• Click any of these buttons to access the section you require: UFOpaedia Data Screens

Organizations—Details on organizations in the city and their role in city affairs.

Vehicles—X-COM, police and any other civilian vehicles.
Vehicle Equipment—Details on vehicle weaponry, engines and general equipment.
Equipment—Details on guns, grenades, Psionic weapons and general equipment.
Base Facilities—Available facilities which may be added to your Bases.
Alien Craft—Information about known Alien craft.
Aliens—Information gathered about the Aliens encountered and researched.
The Alien Dimension—Information gathered about Alien buildings and their function.
Buildings—Information on all types of building in Mega-Primus.

• Click OK to return to the Cityscape.

Note: not all of these categories will contain data at the beginning of the game. As you When you are viewing a UFOpaedia Data Screen, you will have six other options
complete research, the UFOpaedia will become more comprehensive.
• Click to open to the UFOpaedia Index Screen. This provides a list of all current entries
within the chosen category. Click any item in the list to view the relevant entry.
• Click to move to the next or previous UFOpaedia entry in the current category.
• Click to move to the start of the next or previous UFOpaedia subject category.
• Click OK to return to the UFOpaedia Screen.

92
p. p. 93
 Cityscape Screen

• Click any of these buttons to access the section you require: UFOpaedia Data Screens

Organizations—Details on organizations in the city and their role in city affairs.

Vehicles—X-COM, police and any other civilian vehicles.
Vehicle Equipment—Details on vehicle weaponry, engines and general equipment.
Equipment—Details on guns, grenades, Psionic weapons and general equipment.
Base Facilities—Available facilities which may be added to your Bases.
Alien Craft—Information about known Alien craft.
Aliens—Information gathered about the Aliens encountered and researched.
The Alien Dimension—Information gathered about Alien buildings and their function.
Buildings—Information on all types of building in Mega-Primus.

• Click OK to return to the Cityscape.

Note: not all of these categories will contain data at the beginning of the game. As you When you are viewing a UFOpaedia Data Screen, you will have six other options
complete research, the UFOpaedia will become more comprehensive.
• Click to open to the UFOpaedia Index Screen. This provides a list of all current entries
within the chosen category. Click any item in the list to view the relevant entry.
• Click to move to the next or previous UFOpaedia entry in the current category.
• Click to move to the start of the next or previous UFOpaedia subject category.
• Click OK to return to the UFOpaedia Screen.

92
p. p. 93
 Cityscape Screen

THE OPTIONS SCREEN Saving A Game

The Options Screen allows you to:
• Click Save Game.
• Save Games
• Select any one of the 10 slots to save your current game.
• Load Games
• Delete Saved Games
Type in the name for your saved game using the keyboard and press e.
• Abandon Game
• Quit X-COM: Apocalypse
Loading A Game
• Set Sound Options
• Set Game Preferences
• Click Load Game.
• Click to take you into the Options Screen. • Click the saved game slot of your choice.

Deleting Saved Games

Preferences If you want to remove old saved games, you can do this by deleting them.
Panel

Master Volume • Click Delete Saved Games.

• Select the saved game you wish to delete.
Music Volume
You will then be prompted to confirm whether you want to delete the game or not.
Sound Effects Auto-Scroll
Volume Toggle

94
p. 95
p.
 Cityscape Screen

THE OPTIONS SCREEN Saving A Game

The Options Screen allows you to:
• Click Save Game.
• Save Games
• Select any one of the 10 slots to save your current game.
• Load Games
• Delete Saved Games
Type in the name for your saved game using the keyboard and press e.
• Abandon Game
• Quit X-COM: Apocalypse
Loading A Game
• Set Sound Options
• Set Game Preferences
• Click Load Game.
• Click to take you into the Options Screen. • Click the saved game slot of your choice.

Deleting Saved Games

Preferences If you want to remove old saved games, you can do this by deleting them.
Panel

Master Volume • Click Delete Saved Games.

• Select the saved game you wish to delete.
Music Volume
You will then be prompted to confirm whether you want to delete the game or not.
Sound Effects Auto-Scroll
Volume Toggle

94
p. 95
p.
 Cityscape Screen

Abandoning Games Preferences

• Click Abandon Game to abandon your current game and return to the Main Menu. Messages
At the top of the Preferences Panel there is a list of messages.
Quit X-COM: Apocalypse
• To switch a message off, click on the Tick and a Cross will appear in its place indicating
• Click Quit X-COM: Apocalypse to exit the game and return to your operating system. that the message is now disabled. Disabled messages will only appear in the Message Bar
and will not pause the game.
Sound Options
• To switch a message on, click on the Cross and a Tick will appear in its place indicating
There are three Slider Bars which allow you to set the Master Volume, Music Volume and
that the message is now enabled. Any message that is enabled will cause the Message
the Sound Effects Volume.
Panel to be displayed and pause the game whenever the message occurs.
To change any of these settings, simply drag the Slider Bar left, to decrease volume, or right,
Auto-Scroll Toggle
to increase it.
Whenever Auto-Scroll is enabled, the screen will automatically scroll when the cursor is at
the edge of the display. If Auto-Scroll is disabled, you must click the LMB when the cursor is
There are also three other buttons which allow you to test your Stereo Settings:
at the edge of the screen in order to scroll the screen.
• Click Test Left Speaker to ensure that sound is coming from your left speaker, as
• To disable Auto Scroll click on the Tick and a Cross will appear in its place indicating that
intended.
this feature is now disabled. Simply click on the Cross to enable Auto Scroll again.
• Click Test Right Speaker to ensure that sound is coming from your right speaker, as
intended. Note: some players prefer this method as it prevents them accidentally ‘nudging’ the display
when moving around and selecting items.
• Click Reverse Speaker, if the intended sounds are coming from the wrong speaker, i.e.
sounds intended for the left speaker are coming out of the right speaker.
• Click OK to exit this screen.

96
p. p. 97
 Cityscape Screen

Abandoning Games Preferences

• Click Abandon Game to abandon your current game and return to the Main Menu. Messages
At the top of the Preferences Panel there is a list of messages.
Quit X-COM: Apocalypse
• To switch a message off, click on the Tick and a Cross will appear in its place indicating
• Click Quit X-COM: Apocalypse to exit the game and return to your operating system. that the message is now disabled. Disabled messages will only appear in the Message Bar
and will not pause the game.
Sound Options
• To switch a message on, click on the Cross and a Tick will appear in its place indicating
There are three Slider Bars which allow you to set the Master Volume, Music Volume and
that the message is now enabled. Any message that is enabled will cause the Message
the Sound Effects Volume.
Panel to be displayed and pause the game whenever the message occurs.
To change any of these settings, simply drag the Slider Bar left, to decrease volume, or right,
Auto-Scroll Toggle
to increase it.
Whenever Auto-Scroll is enabled, the screen will automatically scroll when the cursor is at
the edge of the display. If Auto-Scroll is disabled, you must click the LMB when the cursor is
There are also three other buttons which allow you to test your Stereo Settings:
at the edge of the screen in order to scroll the screen.
• Click Test Left Speaker to ensure that sound is coming from your left speaker, as
• To disable Auto Scroll click on the Tick and a Cross will appear in its place indicating that
intended.
this feature is now disabled. Simply click on the Cross to enable Auto Scroll again.
• Click Test Right Speaker to ensure that sound is coming from your right speaker, as
intended. Note: some players prefer this method as it prevents them accidentally ‘nudging’ the display
when moving around and selecting items.
• Click Reverse Speaker, if the intended sounds are coming from the wrong speaker, i.e.
sounds intended for the left speaker are coming out of the right speaker.
• Click OK to exit this screen.

96
p. p. 97
 Cityscape Screen

The advantage of changing the speed of time is that you can play the game at a rate which
GAME TIME DISPLAY suits you. You can also pause the game to evaluate your strategy when Alien activity is
frantic.

X-COM: Apocalypse begins at 12:00 noon on the March 7, 2084. • Click on any of the Time Controls on the right-hand side of the Control Panel to set the
rate at which time passes.
Note: the game clock is a 24-hour clock, meaning that 5:00 pm is displayed as 17:00.
Clicking will advance the time much faster than any of the other Time Controls. Because
Pause
time passes so fast in this mode, it is easy to miss events in the city; with this in mind, the
game will slow to Normal Speed whenever a key event occurs. Ultra Fast cannot be selected
Game Time again until the event has ended.

Slow Speed Normal Speed

Time is suspended when any of the other information screens are accessed.
Double Speed Quad Speed
CENTRAL INFORMATION
Ultra Fast PANEL
Cityscape Screen
X-COM Biochemistry Quantum Organizations
The current game time is continuously updated in the Game Time Display. Vehicles Tab Tab Physics Tab Tab

TIME CONTROLS
The Time Controls allow you to adjust the rate at which time passes in the game. There are
four time control buttons, ranging from Slow to Quad Speed. You can also Pause the game
from here and set time to pass Ultra Fast.

Engineering Hostile
Bases Tab Agent Tab Tab Vehicles Tab

98
p. p. 99
 Cityscape Screen

The advantage of changing the speed of time is that you can play the game at a rate which
GAME TIME DISPLAY suits you. You can also pause the game to evaluate your strategy when Alien activity is
frantic.

X-COM: Apocalypse begins at 12:00 noon on the March 7, 2084. • Click on any of the Time Controls on the right-hand side of the Control Panel to set the
rate at which time passes.
Note: the game clock is a 24-hour clock, meaning that 5:00 pm is displayed as 17:00.
Clicking will advance the time much faster than any of the other Time Controls. Because
Pause
time passes so fast in this mode, it is easy to miss events in the city; with this in mind, the
game will slow to Normal Speed whenever a key event occurs. Ultra Fast cannot be selected
Game Time again until the event has ended.

Slow Speed Normal Speed

Time is suspended when any of the other information screens are accessed.
Double Speed Quad Speed
CENTRAL INFORMATION
Ultra Fast PANEL
Cityscape Screen
X-COM Biochemistry Quantum Organizations
The current game time is continuously updated in the Game Time Display. Vehicles Tab Tab Physics Tab Tab

TIME CONTROLS
The Time Controls allow you to adjust the rate at which time passes in the game. There are
four time control buttons, ranging from Slow to Quad Speed. You can also Pause the game
from here and set time to pass Ultra Fast.

Engineering Hostile
Bases Tab Agent Tab Tab Vehicles Tab

98
p. p. 99
 BASES TAB

This panel provides you direct access to all of your resources, allowing you total control over X-COM Bases are built inside the city and are often concealed as inconspicuous office blocks
X-COM forces. The panel consists of eight tabs, each containing further options. The or warehouses. The only access to these Bases is via the parking bays or the lift shaft. While
following is a list of the Tabs most of the action in X-COM: Apocalypse takes place in the Cityscape and the Tactical
Combat Missions, much of the preparation happens in the Bases Screen. Your Bases serve a
Bases Tab variety of functions crucial to your operations in Mega-Primus:
X-COM Vehicles Tab
Agent Tab • Agents sleep, work out, improve Psi and firearms skills.
Biochemistry Tab • Vehicles and Agents are equipped.
Engineering Tab • Bio and Quantum Research is carried out.
Quantum Physics Tab • New Technology, equipment and vehicles are manufactured.
Hostile Vehicles Tab • Aliens are contained and interrogated.
Organizations Tab • X-COM activity is coordinated.

The following sections of this manual will cover each Tab in turn and detail all of the options • Select the Bases Tab from the Central Information Panel in the Cityscape.
available to you. The manual will then cover the Tactical Game.

Bases Tab Buy New Base

Base List
Bases Screen

100
p. p. 101
 BASES TAB

This panel provides you direct access to all of your resources, allowing you total control over X-COM Bases are built inside the city and are often concealed as inconspicuous office blocks
X-COM forces. The panel consists of eight tabs, each containing further options. The or warehouses. The only access to these Bases is via the parking bays or the lift shaft. While
following is a list of the Tabs most of the action in X-COM: Apocalypse takes place in the Cityscape and the Tactical
Combat Missions, much of the preparation happens in the Bases Screen. Your Bases serve a
Bases Tab variety of functions crucial to your operations in Mega-Primus:
X-COM Vehicles Tab
Agent Tab • Agents sleep, work out, improve Psi and firearms skills.
Biochemistry Tab • Vehicles and Agents are equipped.
Engineering Tab • Bio and Quantum Research is carried out.
Quantum Physics Tab • New Technology, equipment and vehicles are manufactured.
Hostile Vehicles Tab • Aliens are contained and interrogated.
Organizations Tab • X-COM activity is coordinated.

The following sections of this manual will cover each Tab in turn and detail all of the options • Select the Bases Tab from the Central Information Panel in the Cityscape.
available to you. The manual will then cover the Tactical Game.

Bases Tab Buy New Base

Base List
Bases Screen

100
p. p. 101
 Cityscape Screen

The Bases Tab contains the following features: The Bases Screen consists of six main areas:

1. Base List—This area shows all X-COM Bases. You can buy a maximum of eight Bases. To 1. The Base Display
select a Base, simply click the one you want (click again to center the display on the 2. Base List
selected Base). 3. City Map
2. Base Name—The name of the presently selected Base will be displayed below the Base 4. Information Panel
List. 5. Facilities Menu
3. —Click this icon to take you to the Bases Screen. 6. Menu Bar
4. —Click this icon to buy a new Base (for full details see Buy New Base later in this
chapter). THE BASE DISPLAY
The Base Display allows you to see, at a glance, the size of your Bases and their facilities.

THE BASES SCREEN Note: to rename your base, click on the existing base name within the Base Display. Type in
your new name and press e on the keyboard.

• Click to access the Bases Screen. Initially, X-COM will have only one Base. As time progresses, you may have up to eight Bases
citywide. These can be selected from the Base List. Each of these contains a miniature map
of a Base layout.
Base List City Map
Note: red squares represent facilities under construction.
Base Display
Information • Click a Base icon to select a Base. The name of the selected Base is displayed underneath
Panel
the Base List.
Menu Bar
Bases are highlighted orange on the City Map. When you have more than one Base, the
Facilities
Menu currently selected one is highlighted yellow.

102
p. 103
p.
 Cityscape Screen

The Bases Tab contains the following features: The Bases Screen consists of six main areas:

1. Base List—This area shows all X-COM Bases. You can buy a maximum of eight Bases. To 1. The Base Display
select a Base, simply click the one you want (click again to center the display on the 2. Base List
selected Base). 3. City Map
2. Base Name—The name of the presently selected Base will be displayed below the Base 4. Information Panel
List. 5. Facilities Menu
3. —Click this icon to take you to the Bases Screen. 6. Menu Bar
4. —Click this icon to buy a new Base (for full details see Buy New Base later in this
chapter). THE BASE DISPLAY
The Base Display allows you to see, at a glance, the size of your Bases and their facilities.

THE BASES SCREEN Note: to rename your base, click on the existing base name within the Base Display. Type in
your new name and press e on the keyboard.

• Click to access the Bases Screen. Initially, X-COM will have only one Base. As time progresses, you may have up to eight Bases
citywide. These can be selected from the Base List. Each of these contains a miniature map
of a Base layout.
Base List City Map
Note: red squares represent facilities under construction.
Base Display
Information • Click a Base icon to select a Base. The name of the selected Base is displayed underneath
Panel
the Base List.
Menu Bar
Bases are highlighted orange on the City Map. When you have more than one Base, the
Facilities
Menu currently selected one is highlighted yellow.

102
p. 103
p.
 Bases Tab

INFORMATION PANEL Note: as the game progresses, you will be able to research new technology that can be
Moving the cursor over the Base facilities in the Base Display, or Facilities Menu, will incorporated into your Bases. See the online UFOpaedia for full details of all Base facilities
display the name of the facility in the Information Panel, along with all relevant facility (see The UFOpaedia in the Cityscape section of the manual for further details).
information.
Located at the foot of the Bases Screen is a scrolling list of available Base facilities. Simply
BASE FACILITIES move the cursor to the facility you wish to build; a white box will highlight your selection and
At the beginning of the game, you are given one Base and some facilities to help begin provide a list of information about construction cost, construction time and maintenance
investigations in the city. You will already have many facilities built; however, you can add to costs in the Information Panel.
this by building new facilities.
• ‘Drag and Drop’ Base facilities to the desired location on your Base Display to build the
Build Facilities facility.
As the scope of X-COM’s operations increase, so too does the need to increase the size of the
facilities available to X-COM—if you oversubscribe a facility, then its efficiency will be Note: you can only build a Base facility on top of an existing corridor.
diminished. To begin with, you can only choose to build from the following list:
The new facility will now be shown on the Base Display, displaying the number of
Living Quarters construction days remaining.
Stores
Medical Bay If you wish to abort the build facility operation, ‘Drop’ the Base facility anywhere outside the
Training Area Base Display.
Psi-Gym
Security Station Note: you can right-click on a facility to view the UFOpaedia entry for that facility.
Vehicle Repair Bay
Bio-lab Destroy Facilities
Quantum lab There will be points in the game where you will wish to destroy some of the existing facilities.
Alien Containment There are a range of reasons why you might choose to do this: you no longer have a need for
Workshop some facilities or you have completed research into better facilities and you wish to upgrade
the existing ones.

104
p. p.105
 Bases Tab

INFORMATION PANEL Note: as the game progresses, you will be able to research new technology that can be
Moving the cursor over the Base facilities in the Base Display, or Facilities Menu, will incorporated into your Bases. See the online UFOpaedia for full details of all Base facilities
display the name of the facility in the Information Panel, along with all relevant facility (see The UFOpaedia in the Cityscape section of the manual for further details).
information.
Located at the foot of the Bases Screen is a scrolling list of available Base facilities. Simply
BASE FACILITIES move the cursor to the facility you wish to build; a white box will highlight your selection and
At the beginning of the game, you are given one Base and some facilities to help begin provide a list of information about construction cost, construction time and maintenance
investigations in the city. You will already have many facilities built; however, you can add to costs in the Information Panel.
this by building new facilities.
• ‘Drag and Drop’ Base facilities to the desired location on your Base Display to build the
Build Facilities facility.
As the scope of X-COM’s operations increase, so too does the need to increase the size of the
facilities available to X-COM—if you oversubscribe a facility, then its efficiency will be Note: you can only build a Base facility on top of an existing corridor.
diminished. To begin with, you can only choose to build from the following list:
The new facility will now be shown on the Base Display, displaying the number of
Living Quarters construction days remaining.
Stores
Medical Bay If you wish to abort the build facility operation, ‘Drop’ the Base facility anywhere outside the
Training Area Base Display.
Psi-Gym
Security Station Note: you can right-click on a facility to view the UFOpaedia entry for that facility.
Vehicle Repair Bay
Bio-lab Destroy Facilities
Quantum lab There will be points in the game where you will wish to destroy some of the existing facilities.
Alien Containment There are a range of reasons why you might choose to do this: you no longer have a need for
Workshop some facilities or you have completed research into better facilities and you wish to upgrade
the existing ones.

104
p. p.105
 Bases Tab

Whatever the reason, the demolition process is very simple:

HIRE/FIRE SCREEN
• Click on the facility you wish to destroy in the Base Display.

You will then be prompted to confirm whether you wish to destroy the facility or not. As X-COM increases the scope of its operations, it is essential that more Agents and
Scientists be recruited to carry out vital research and Tactical Combat Missions.
MENU BAR
The Menu Bar allows you to access various areas of your Base so you can see in detail how • Click from the Bases Screen.
each of your Bases is currently functioning. From the Menu Bar you can carry out tasks such
as arming vehicles, organizing research and recruiting staff.
Base List

1. —Click this to open the Hire/Fire Screen (for full details see Hire/Fire Screen later in
this chapter). Menu Bar
Information
2. —Click on this to open the Buy and Sell Screen (for full details see Buying and Panel
Civilian List
Selling Items later in this chapter).
3. —Click on this to open the Transfer Screen (for full details see Transferring Items
Agent List
later in this chapter).
4. —Click this to open the Equip Agent Screen (for full details see Equip Agents Screen
in the Agent Tab section of this manual).
5. —Clicking this icon takes you to the Equip Vehicle Screen (for full details see Equip
Vehicle Screen in the X-COM Vehicles Tab section of this manual).
6. —Click this to open the Research and Manufacturing Screen (for full details see
Research and Manufacturing Screen in the Biochemistry, Engineering and Quantum
Physics Tab section of the manual).
7. —Click this to open the Alien Containment Screen.

106
p. 107
p.
 Bases Tab

Whatever the reason, the demolition process is very simple:

HIRE/FIRE SCREEN
• Click on the facility you wish to destroy in the Base Display.

You will then be prompted to confirm whether you wish to destroy the facility or not. As X-COM increases the scope of its operations, it is essential that more Agents and
Scientists be recruited to carry out vital research and Tactical Combat Missions.
MENU BAR
The Menu Bar allows you to access various areas of your Base so you can see in detail how • Click from the Bases Screen.
each of your Bases is currently functioning. From the Menu Bar you can carry out tasks such
as arming vehicles, organizing research and recruiting staff.
Base List

1. —Click this to open the Hire/Fire Screen (for full details see Hire/Fire Screen later in
this chapter). Menu Bar
Information
2. —Click on this to open the Buy and Sell Screen (for full details see Buying and Panel
Civilian List
Selling Items later in this chapter).
3. —Click on this to open the Transfer Screen (for full details see Transferring Items
Agent List
later in this chapter).
4. —Click this to open the Equip Agent Screen (for full details see Equip Agents Screen
in the Agent Tab section of this manual).
5. —Clicking this icon takes you to the Equip Vehicle Screen (for full details see Equip
Vehicle Screen in the X-COM Vehicles Tab section of this manual).
6. —Click this to open the Research and Manufacturing Screen (for full details see
Research and Manufacturing Screen in the Biochemistry, Engineering and Quantum
Physics Tab section of the manual).
7. —Click this to open the Alien Containment Screen.

106
p. 107
p.
 Bases Tab

The screen contains: • Click OK to hire your chosen personnel and return to the Bases Screen.

1. Base List—Click any of the Bases to change your Base selection. Agents come from all over Mega-Primus, so there will be a delay before Agents start active
2. Information Panel—Agent stats and information will be displayed here. service as they make their way to your Base.
3. Civilian List—Displayed on the far right of the screen, this lists available personnel for
X-COM to hire. Note: don’t forget to arm X-COM Agents and assign them to vehicles when they arrive.
4. Agent List—A list of currently employed X-COM Agents.
5. Menu Bar—You can select X-COM Agents, Biochemists, Quantum Physicists, and FIRING AGENTS
Engineers from here. Agents cost money and can be one of your largest expenses, depending on the number you
have employed. You may choose to fire X-COM personnel, when you can no longer afford to
HIRING AGENTS keep the amount you have or where Agents are underutilized.
To recruit staff from this screen, select the Base from which you wish to hire new Agents
(from the Base List). Sacking a member of staff is a similar process to recruiting one.

• Click the personnel type that you wish to hire (from the Menu Bar). A list of potential • Go to the Hire/Fire Screen (see above for details).
recruits will appear in the Civilian List.
• Select the Base from which you wish to fire personnel.
• As you highlight each civilian, a list of statistics will appear in the Information Panel.
• Select the personnel type from the Menu Bar.
• Click on the civilian of your choice to hire that person. They will now appear in the Agent
• Select the personnel you wish to fire from the Agent List. These Agents will then appear in
List.
the Civilian List.
The bar next to the Base List shows you how much living space you have used. As you take • Click OK to fire your chosen personnel and return to the Bases Screen.
on new recruits, you should keep an eye on this bar. As you begin to run out of space, you
should consider building more Living Quarters. Note: you can sack as many Agents as you wish while you are on this screen.

108
p. p. 109
 Bases Tab

The screen contains: • Click OK to hire your chosen personnel and return to the Bases Screen.

1. Base List—Click any of the Bases to change your Base selection. Agents come from all over Mega-Primus, so there will be a delay before Agents start active
2. Information Panel—Agent stats and information will be displayed here. service as they make their way to your Base.
3. Civilian List—Displayed on the far right of the screen, this lists available personnel for
X-COM to hire. Note: don’t forget to arm X-COM Agents and assign them to vehicles when they arrive.
4. Agent List—A list of currently employed X-COM Agents.
5. Menu Bar—You can select X-COM Agents, Biochemists, Quantum Physicists, and FIRING AGENTS
Engineers from here. Agents cost money and can be one of your largest expenses, depending on the number you
have employed. You may choose to fire X-COM personnel, when you can no longer afford to
HIRING AGENTS keep the amount you have or where Agents are underutilized.
To recruit staff from this screen, select the Base from which you wish to hire new Agents
(from the Base List). Sacking a member of staff is a similar process to recruiting one.

• Click the personnel type that you wish to hire (from the Menu Bar). A list of potential • Go to the Hire/Fire Screen (see above for details).
recruits will appear in the Civilian List.
• Select the Base from which you wish to fire personnel.
• As you highlight each civilian, a list of statistics will appear in the Information Panel.
• Select the personnel type from the Menu Bar.
• Click on the civilian of your choice to hire that person. They will now appear in the Agent
• Select the personnel you wish to fire from the Agent List. These Agents will then appear in
List.
the Civilian List.
The bar next to the Base List shows you how much living space you have used. As you take • Click OK to fire your chosen personnel and return to the Bases Screen.
on new recruits, you should keep an eye on this bar. As you begin to run out of space, you
should consider building more Living Quarters. Note: you can sack as many Agents as you wish while you are on this screen.

108
p. p. 109
 Bases Tab

BUYING AND SELLING

ITEMS
Base List

Menu Bar
• Click from the Base Display to open this screen. From here you buy everything to
equip your vehicles and Agents.
Slider Bar
Information
The Buy and Sell Screen consists of: Panel

1. Base List—Located on the left of the screen, these icons show all of your Bases. Item Menu
2. Menu Bar—These buttons allow you to select specific item categories:
• Vehicles
• Agent Equipment The Menu Bar on the right of the screen allows you to choose the type of item you wish to
• Airborne Vehicle Equipment buy or sell (e.g. Agent Equipment).
• Road Vehicle Equipment
3. Item Menu—This displays a list of equipment, the number at your Base, the number being • Click the appropriate button—a list of items of that type will appear in the Item Menu.
bought/sold, the price of the item and a Slider Bar.
• Use the Scroll Arrows to look through the Item Menu.
4. Information Panel—Located on the left side of the screen, this panel will display the
currently highlighted item (from the Item Menu) and any information about it. • To buy an amount of a particular item, move the Slider Bar right until the number you
wish to buy is added to the number at your Base.
BUYING ITEMS
• To sell any items, move the Slider Bar left.
Before buying or selling items, you must first select the Base from which they will be bought
or sold.

• Click on the Base of your choice from the Base List. To change your Base selection,
simply click on another Base.

110
p. 111
p.
 Bases Tab

BUYING AND SELLING

ITEMS
Base List

Menu Bar
• Click from the Base Display to open this screen. From here you buy everything to
equip your vehicles and Agents.
Slider Bar
Information
The Buy and Sell Screen consists of: Panel

1. Base List—Located on the left of the screen, these icons show all of your Bases. Item Menu
2. Menu Bar—These buttons allow you to select specific item categories:
• Vehicles
• Agent Equipment The Menu Bar on the right of the screen allows you to choose the type of item you wish to
• Airborne Vehicle Equipment buy or sell (e.g. Agent Equipment).
• Road Vehicle Equipment
3. Item Menu—This displays a list of equipment, the number at your Base, the number being • Click the appropriate button—a list of items of that type will appear in the Item Menu.
bought/sold, the price of the item and a Slider Bar.
• Use the Scroll Arrows to look through the Item Menu.
4. Information Panel—Located on the left side of the screen, this panel will display the
currently highlighted item (from the Item Menu) and any information about it. • To buy an amount of a particular item, move the Slider Bar right until the number you
wish to buy is added to the number at your Base.
BUYING ITEMS
• To sell any items, move the Slider Bar left.
Before buying or selling items, you must first select the Base from which they will be bought
or sold.

• Click on the Base of your choice from the Base List. To change your Base selection,
simply click on another Base.

110
p. 111
p.
 Bases Tab

Next to the Base List you will see a bar showing you how much storage capacity you have
used. Watch this bar. As your stores fill up, you should consider building another Storage
Facility. Base Lists

The Total Funds available to you are displayed in the top right corner of the screen. Fund Slider Bar
Adjustments, as a result of buying and selling items, are displayed in the top left corner. A
positive figure indicates a profit, while a negative figure shows how much you have spent. Information Menu Bar
Panel

When you have selected the number you wish to buy and/or sell, click OK to accept your Item Menu
choices and leave the Buy and Sell Screen.

Note: while you are on the Buying and Selling Screen, you can buy or sell as many items as
you wish, providing you have the funds. The Transfer Screen works in the same way as the Buy and Sell Screen. It consists of:

1. Base List—Unlike other screens, the Transfer Screen has two Base Lists denoting where
TRANSFERS items are transferred from and to.
2. Menu Bar—These buttons allow you to select specific item categories:
• Agents
• Click from the Base Screen to open the Transfer Screen. It is from here that you can • Biochemists
• Quantum Physicists
transfer items from one of your Bases to another.
• Engineers
• Vehicles
Note: you need more than one Base before you can transfer anything.
• Agent Equipment
• Airborne Vehicle Equipment
• Road Vehicle Equipment
• Aliens

112
p. 113
p.
 Bases Tab

Next to the Base List you will see a bar showing you how much storage capacity you have
used. Watch this bar. As your stores fill up, you should consider building another Storage
Facility. Base Lists

The Total Funds available to you are displayed in the top right corner of the screen. Fund Slider Bar
Adjustments, as a result of buying and selling items, are displayed in the top left corner. A
positive figure indicates a profit, while a negative figure shows how much you have spent. Information Menu Bar
Panel

When you have selected the number you wish to buy and/or sell, click OK to accept your Item Menu
choices and leave the Buy and Sell Screen.

Note: while you are on the Buying and Selling Screen, you can buy or sell as many items as
you wish, providing you have the funds. The Transfer Screen works in the same way as the Buy and Sell Screen. It consists of:

1. Base List—Unlike other screens, the Transfer Screen has two Base Lists denoting where
TRANSFERS items are transferred from and to.
2. Menu Bar—These buttons allow you to select specific item categories:
• Agents
• Click from the Base Screen to open the Transfer Screen. It is from here that you can • Biochemists
• Quantum Physicists
transfer items from one of your Bases to another.
• Engineers
• Vehicles
Note: you need more than one Base before you can transfer anything.
• Agent Equipment
• Airborne Vehicle Equipment
• Road Vehicle Equipment
• Aliens

112
p. 113
p.
 Bases Tab

3. Item Menu—This displays a list of equipment, the number at each Base and a Slider Bar. ALIEN CONTAINMENT
4. Information Panel—Located on the left side of the screen, this panel will display the SCREEN
currently highlighted item (from the Item Menu) and any information about it.
This is an information screen which allows you to see at a glance the following:
TRANSFERRING ITEMS
Before transferring items, you must first select the two Bases to transfer goods between. • What types of Aliens you have at Base.
• How many of each Alien you have.
• Click on the Base of your choice from the left-hand Base List. • The status of those Aliens (whether they are dead or alive).
• Click another Base from the right-hand Base List. • The size of the Alien.

To change your Base selections, simply click on another Base from either set of Base icons. Because you have limited space in your Bases and containment facilities, you need to know
Once two Bases are selected, you will be able to transfer items from either Base. what space Aliens take up and how much is left. The Alien containment screen shows you this
information and allows you only to keep the Aliens you need for research.
The Menu Bar on the right of the screen allows you to choose the type of item you wish to
transfer (i.e. Agent Equipment). • Use the Slider Bars to remove Aliens from the containment facility.
• Click the appropriate button—a list of items of that type will appear in the Item Menu.

• Use the Scroll Arrows to look through the Item Menu. BUY NEW BASE

• To transfer an item, use the Scroll Arrows to move the Slider Bar left or right until the
number you wish to transfer is added to the number at the other Base. As Alien activity increases, you will need more Bases around the city to deploy Agents and
vehicles quicker and more efficiently.
When you have finished, click OK to accept your choices and leave the Transfer Screen.

114
p. 115
p.
 Bases Tab

3. Item Menu—This displays a list of equipment, the number at each Base and a Slider Bar. ALIEN CONTAINMENT
4. Information Panel—Located on the left side of the screen, this panel will display the SCREEN
currently highlighted item (from the Item Menu) and any information about it.
This is an information screen which allows you to see at a glance the following:
TRANSFERRING ITEMS
Before transferring items, you must first select the two Bases to transfer goods between. • What types of Aliens you have at Base.
• How many of each Alien you have.
• Click on the Base of your choice from the left-hand Base List. • The status of those Aliens (whether they are dead or alive).
• Click another Base from the right-hand Base List. • The size of the Alien.

To change your Base selections, simply click on another Base from either set of Base icons. Because you have limited space in your Bases and containment facilities, you need to know
Once two Bases are selected, you will be able to transfer items from either Base. what space Aliens take up and how much is left. The Alien containment screen shows you this
information and allows you only to keep the Aliens you need for research.
The Menu Bar on the right of the screen allows you to choose the type of item you wish to
transfer (i.e. Agent Equipment). • Use the Slider Bars to remove Aliens from the containment facility.
• Click the appropriate button—a list of items of that type will appear in the Item Menu.

• Use the Scroll Arrows to look through the Item Menu. BUY NEW BASE

• To transfer an item, use the Scroll Arrows to move the Slider Bar left or right until the
number you wish to transfer is added to the number at the other Base. As Alien activity increases, you will need more Bases around the city to deploy Agents and
vehicles quicker and more efficiently.
When you have finished, click OK to accept your choices and leave the Transfer Screen.

114
p. 115
p.
 Bases Tab

X-COM VEHICLES TAB

To buy a new Base, you must first go to the Cityscape Screen. During your investigations in and around Mega-Primus you will encounter a variety of
vehicles. These range between flying and road-going, Motorbikes, Hover bikes, Cars,
• Click the Bases Tab from the Central Information Panel. Hovercars, Airtaxis, Construction Vehicles, and Interceptors. The ownership of these vehicles
varies, but largely fall into these categories: Taxis, Police, X-COM and Alien. X-COM has a full
• Click . You will be shown the Overhead Map View of Mega-Primus. Available sites for
list of vehicles in the online UFOpaedia for your reference.
new Bases will be shown with a flashing blue box. Existing Bases will be highlighted with a
flashing yellow box.
At the beginning of the game, you will send vehicles out to intercept UFOs or to carry Agents
• Click on an available building to select a site for your Base; you will be taken to the Buy to sites around the city. As the game progresses, you will use them to attack buildings and
Base Screen. The Buy Base Screen gives you information on your current funds, the cost travel into the Alien Dimension.
of the basement and the name of the building to which it belongs; you will also have a
picture of the Base layout. • Select the X-COM Vehicles Tab from the Central Information Panel in the Cityscape.
• Click to buy the building for your Base; you will now be prompted to name your
Base. Type in your new Base name using the keyboard and press e.
Vehicle X-COM
If you don’t want to buy a new Base, just click OK to return to the Overhead Map. List Vehicles Tab

Note: not all Bases are the same shape and size. You will get a different setup depending on
the building and its cost. Look around at different options before you make your choice.

Craft Weapon Set Attack Set Vehicle

Display Mode Altitude

116
p. p. 117
 Bases Tab

X-COM VEHICLES TAB

To buy a new Base, you must first go to the Cityscape Screen. During your investigations in and around Mega-Primus you will encounter a variety of
vehicles. These range between flying and road-going, Motorbikes, Hover bikes, Cars,
• Click the Bases Tab from the Central Information Panel. Hovercars, Airtaxis, Construction Vehicles, and Interceptors. The ownership of these vehicles
varies, but largely fall into these categories: Taxis, Police, X-COM and Alien. X-COM has a full
• Click . You will be shown the Overhead Map View of Mega-Primus. Available sites for
list of vehicles in the online UFOpaedia for your reference.
new Bases will be shown with a flashing blue box. Existing Bases will be highlighted with a
flashing yellow box.
At the beginning of the game, you will send vehicles out to intercept UFOs or to carry Agents
• Click on an available building to select a site for your Base; you will be taken to the Buy to sites around the city. As the game progresses, you will use them to attack buildings and
Base Screen. The Buy Base Screen gives you information on your current funds, the cost travel into the Alien Dimension.
of the basement and the name of the building to which it belongs; you will also have a
picture of the Base layout. • Select the X-COM Vehicles Tab from the Central Information Panel in the Cityscape.
• Click to buy the building for your Base; you will now be prompted to name your
Base. Type in your new Base name using the keyboard and press e.
Vehicle X-COM
If you don’t want to buy a new Base, just click OK to return to the Overhead Map. List Vehicles Tab

Note: not all Bases are the same shape and size. You will get a different setup depending on
the building and its cost. Look around at different options before you make your choice.

Craft Weapon Set Attack Set Vehicle

Display Mode Altitude

116
p. p. 117
 X-COM Vehicles Tab

The X-COM Vehicles Tab consists of:

10. —Orders an X-COM vehicle to intercept another designated vehicle.
1. Vehicle List—This shows all of X-COM’s vehicles. Use the Scroll Arrows to look through 11. —Orders an X-COM vehicle to attack a selected building.
the list of vehicles. Click on a vehicle icon to select that vehicle; click a second time to
center the display on the selected vehicle. You can select more than one vehicle by holding For a full explanation of how to select and order vehicles, see Vehicle Orders later in this
down c and clicking on the vehicle icons. Click the vehicle icons with the RMB to chapter.
deselect them. A maximum of 13 vehicles may be assigned to a group.

Note: when more than one vehicle is selected, all movement and Rules of Engagement orders EQUIPPING VEHICLES
will apply to all currently selected vehicles. However, the craft weapon display, button and
the button will only apply to the highlighted vehicle (shown as a brighter icon). Ensure that vehicles are fully equipped before you send them out on missions; remember a
vehicle can only be equipped when it is at Base.
2. Craft Weapon Display—The three boxes underneath the Vehicle List display the currently
selected vehicle’s weaponry. • Click from the X-COM Vehicles Tab to take you to the Equip Vehicle Screen.
3. Set Attack Mode—These four buttons set the vehicle’s behavior, from evasive flight to
aggressive attack. Note: You can also click from the Bases Screen.
4. Set Vehicle Altitude—These four buttons select a vehicle’s altitude as it flies over Mega-
EQUIP VEHICLE SCREEN
Primus.
5. —Orders an X-COM vehicle towards a selected building.
6. —Orders an X-COM vehicle to a specific map location.
Information Panel
7. —Orders an X-COM vehicle to return to Base. Vehicle List
Vehicle With
8. —Click this to take you to the Equip Vehicle Screen. Arming Areas

9. —This button opens the Vehicle Location Screen. Menu Bar

Item Menu

118
p. 119
p.
 X-COM Vehicles Tab

The X-COM Vehicles Tab consists of:

10. —Orders an X-COM vehicle to intercept another designated vehicle.
1. Vehicle List—This shows all of X-COM’s vehicles. Use the Scroll Arrows to look through 11. —Orders an X-COM vehicle to attack a selected building.
the list of vehicles. Click on a vehicle icon to select that vehicle; click a second time to
center the display on the selected vehicle. You can select more than one vehicle by holding For a full explanation of how to select and order vehicles, see Vehicle Orders later in this
down c and clicking on the vehicle icons. Click the vehicle icons with the RMB to chapter.
deselect them. A maximum of 13 vehicles may be assigned to a group.

Note: when more than one vehicle is selected, all movement and Rules of Engagement orders EQUIPPING VEHICLES
will apply to all currently selected vehicles. However, the craft weapon display, button and
the button will only apply to the highlighted vehicle (shown as a brighter icon). Ensure that vehicles are fully equipped before you send them out on missions; remember a
vehicle can only be equipped when it is at Base.
2. Craft Weapon Display—The three boxes underneath the Vehicle List display the currently
selected vehicle’s weaponry. • Click from the X-COM Vehicles Tab to take you to the Equip Vehicle Screen.
3. Set Attack Mode—These four buttons set the vehicle’s behavior, from evasive flight to
aggressive attack. Note: You can also click from the Bases Screen.
4. Set Vehicle Altitude—These four buttons select a vehicle’s altitude as it flies over Mega-
EQUIP VEHICLE SCREEN
Primus.
5. —Orders an X-COM vehicle towards a selected building.
6. —Orders an X-COM vehicle to a specific map location.
Information Panel
7. —Orders an X-COM vehicle to return to Base. Vehicle List
Vehicle With
8. —Click this to take you to the Equip Vehicle Screen. Arming Areas

9. —This button opens the Vehicle Location Screen. Menu Bar

Item Menu

118
p. 119
p.
 The Equip Vehicle Screen consists of these main areas: • Locate the item of your choice from the Item Menu.
• Drag and drop items from the Item Menu to the equipment area of your choice (on the
1. Vehicle List
vehicle).
2. Vehicle with Arming Areas
3. Information Panel—Moving the cursor over any of the vehicles in the Vehicle List, or any
Note: you can only ‘drop’ items into flashing Arming Areas.
of the items in the Item Menu, will display corresponding information in this panel.
4. Item Menu—This area lists either Weapons, Equipment or Engines.
To remove an item from the vehicle, simply drag and drop it to the Item Menu at the bottom
5. Menu Bar—There are three options:
of the screen. The item will now be returned to the stores.
• Weapons
• Engines
• Click OK to leave this screen, when you are happy with your choices.
• Equipment
Note: each time a vehicle returns to Base after a mission, it will be rearmed or refuelled
Arming Vehicles
automatically, providing there is enough ammunition or fuel of the correct type to do so.
• Use the Scroll Arrows to cycle through the Vehicle List (if necessary).
• Highlight the vehicles by placing your cursor over them. When a vehicle is highlighted, its
VEHICLE LOCATION
statistics will appear in the Information Panel. SCREEN
• Click on the vehicle you wish to equip. The vehicle will now appear in the center of the
screen along with its present equipment. This screen is very similar to the Buildings Screen mentioned in the Cityscape section of the
• Click if you wish to arm the vehicle with weapons. Reference Guide. The screen informs you where your vehicles are and what Agents are
assigned to them.
• Click if you wish to fit the vehicle out with engines.
• Click if you wish to load the vehicle with equipment. • Click from the X-COM Vehicles Tab.

A list of either weapons, equipment or engines will now appear in the Item List. The Vehicle Location Screen consists of an Agent List and a Vehicle List.

120
p. p. 121
 The Equip Vehicle Screen consists of these main areas: • Locate the item of your choice from the Item Menu.
• Drag and drop items from the Item Menu to the equipment area of your choice (on the
1. Vehicle List
vehicle).
2. Vehicle with Arming Areas
3. Information Panel—Moving the cursor over any of the vehicles in the Vehicle List, or any
Note: you can only ‘drop’ items into flashing Arming Areas.
of the items in the Item Menu, will display corresponding information in this panel.
4. Item Menu—This area lists either Weapons, Equipment or Engines.
To remove an item from the vehicle, simply drag and drop it to the Item Menu at the bottom
5. Menu Bar—There are three options:
of the screen. The item will now be returned to the stores.
• Weapons
• Engines
• Click OK to leave this screen, when you are happy with your choices.
• Equipment
Note: each time a vehicle returns to Base after a mission, it will be rearmed or refuelled
Arming Vehicles
automatically, providing there is enough ammunition or fuel of the correct type to do so.
• Use the Scroll Arrows to cycle through the Vehicle List (if necessary).
• Highlight the vehicles by placing your cursor over them. When a vehicle is highlighted, its
VEHICLE LOCATION
statistics will appear in the Information Panel. SCREEN
• Click on the vehicle you wish to equip. The vehicle will now appear in the center of the
screen along with its present equipment. This screen is very similar to the Buildings Screen mentioned in the Cityscape section of the
• Click if you wish to arm the vehicle with weapons. Reference Guide. The screen informs you where your vehicles are and what Agents are
assigned to them.
• Click if you wish to fit the vehicle out with engines.
• Click if you wish to load the vehicle with equipment. • Click from the X-COM Vehicles Tab.

A list of either weapons, equipment or engines will now appear in the Item List. The Vehicle Location Screen consists of an Agent List and a Vehicle List.

120
p. p. 121
 X-COM Vehicles Tab

This screen allows you to drag and drop Agents to and from vehicles to assign and de-assign GO TO BUILDING
them. Orders a vehicle towards a selected building.

• Use the Vehicle List to choose a vehicle.

VEHICLE ORDERS
• Click on the vehicle to select it.
• Click and select the destination building by clicking on it in the Overhead/Isometric
With your vehicle equipped and ready for action, you can send it out on a mission. To give Map View. Your vehicle will make its way towards the building and stop there, waiting for
your vehicles orders, you must be in the Cityscape Screen. further orders.

• Click on the X-COM Vehicles Tab if it isn’t already displayed. You will now be in a position GO TO MAP POINT
to give any of the following orders: This orders a vehicle to a location anywhere on the map.
Go to Map Equip Attack
Point Vehicle Hostile Unit • Use the Vehicle List to choose a vehicle.
• Click on the vehicle to select it.
• Click and select the destination by clicking on it in the Overhead/Isometric Map View.
Your vehicle will make its way towards that destination and wait, until you give it further
orders.

Go to Return Vehicle Attack

Note: you must use this order when you want to enter a Dimension Gate. To enter a
Building to Base Location Building Dimension Gate, you must have developed the appropriate technology.

RETURN TO BASE
This orders a vehicle to return to its Base.

122
p. p. 123
 X-COM Vehicles Tab

This screen allows you to drag and drop Agents to and from vehicles to assign and de-assign GO TO BUILDING
them. Orders a vehicle towards a selected building.

• Use the Vehicle List to choose a vehicle.

VEHICLE ORDERS
• Click on the vehicle to select it.
• Click and select the destination building by clicking on it in the Overhead/Isometric
With your vehicle equipped and ready for action, you can send it out on a mission. To give Map View. Your vehicle will make its way towards the building and stop there, waiting for
your vehicles orders, you must be in the Cityscape Screen. further orders.

• Click on the X-COM Vehicles Tab if it isn’t already displayed. You will now be in a position GO TO MAP POINT
to give any of the following orders: This orders a vehicle to a location anywhere on the map.
Go to Map Equip Attack
Point Vehicle Hostile Unit • Use the Vehicle List to choose a vehicle.
• Click on the vehicle to select it.
• Click and select the destination by clicking on it in the Overhead/Isometric Map View.
Your vehicle will make its way towards that destination and wait, until you give it further
orders.

Go to Return Vehicle Attack

Note: you must use this order when you want to enter a Dimension Gate. To enter a
Building to Base Location Building Dimension Gate, you must have developed the appropriate technology.

RETURN TO BASE
This orders a vehicle to return to its Base.

122
p. p. 123
 X-COM Vehicles Tab

• Use the Vehicle List to choose a vehicle. INTERCEPTING HOSTILE

• Click on the vehicle to select it. VEHICLES

• Click . The vehicle will make its way back to Base where it will wait for further orders.
When UFOs appear in the city, you may order X-COM vehicles to intercept them. Attack
ATTACK HOSTILE UNIT Hostile Unit orders an X-COM craft to intercept a vehicle selected by you.
See Intercepting Hostile Vehicles later in this chapter.
• Use the Vehicle List to choose a vehicle.
ATTACK BUILDING • Click on the vehicle to select it.
When Aliens gain control of an organization you may want to attack that organization’s
building. • Click and select the target vehicle by clicking on it in the Overhead/Isometric Map
View. Your vehicle will now attack that vehicle, until you give it further orders.
• Use the Vehicle List to choose a vehicle.
Note: if you do not select a target vehicle, your craft will attack any hostile vehicle within
• Click on the vehicle to select it. weapon range, according to the Rules of Engagement. If you target a particular vehicle, then
• Click and select the target building by clicking it in the Overhead/Isometric Map View. the craft will only attack the vehicle it is pursuing.
Your vehicle will make its way towards the target and attack.
If the target vehicle is destroyed, then you should order your vehicle to return to Base.
Remember that attacking a building will provoke hostile actions from the host organization.
Note: when UFOs appear in the city, you will not be able to select (Ultra Fast) from the
Your vehicle will continue to attack until you give it further orders. Time Controls. To check if the UFO is still in the city, open the Hostile Vehicles Tab (all
vehicles currently in the city are listed here).

124
p. p. 125
 X-COM Vehicles Tab

• Use the Vehicle List to choose a vehicle. INTERCEPTING HOSTILE

• Click on the vehicle to select it. VEHICLES

• Click . The vehicle will make its way back to Base where it will wait for further orders.
When UFOs appear in the city, you may order X-COM vehicles to intercept them. Attack
ATTACK HOSTILE UNIT Hostile Unit orders an X-COM craft to intercept a vehicle selected by you.
See Intercepting Hostile Vehicles later in this chapter.
• Use the Vehicle List to choose a vehicle.
ATTACK BUILDING • Click on the vehicle to select it.
When Aliens gain control of an organization you may want to attack that organization’s
building. • Click and select the target vehicle by clicking on it in the Overhead/Isometric Map
View. Your vehicle will now attack that vehicle, until you give it further orders.
• Use the Vehicle List to choose a vehicle.
Note: if you do not select a target vehicle, your craft will attack any hostile vehicle within
• Click on the vehicle to select it. weapon range, according to the Rules of Engagement. If you target a particular vehicle, then
• Click and select the target building by clicking it in the Overhead/Isometric Map View. the craft will only attack the vehicle it is pursuing.
Your vehicle will make its way towards the target and attack.
If the target vehicle is destroyed, then you should order your vehicle to return to Base.
Remember that attacking a building will provoke hostile actions from the host organization.
Note: when UFOs appear in the city, you will not be able to select (Ultra Fast) from the
Your vehicle will continue to attack until you give it further orders. Time Controls. To check if the UFO is still in the city, open the Hostile Vehicles Tab (all
vehicles currently in the city are listed here).

124
p. p. 125
 X-COM Vehicles Tab

RULES OF ENGAGEMENT Attack Mode

Whenever your vehicles are executing orders in Mega-Primus, you can control their behavior
by setting the Rules of Engagement. Aggressive

Standard
Weapons On/Off
Often your vehicles are armed with an array of weaponry, some of which might be too
Defensive
powerful for the mission in hand. Rather than take these weapons off altogether, you can just
prohibit the use of that weapon by clicking on it in the X-COM Vehicles Tab. Evasive

Altitude

These four buttons set the Attack Mode of your vehicle:

Highest altitude
• Evasive—Avoid hostile craft at long range and do not fire on them. The craft will not take
High altitude a direct route to its destination if it moves close to an enemy craft.
• Defensive—Avoid hostile craft at medium range and only fire in retaliation.
Medium altitude • Standard—Avoid hostile craft at short range and fire on hostile craft if they are in weapon
range.
Low altitude • Aggressive—Do not avoid hostile craft at all, and fire on hostile craft if they are in weapon
range.

Waypoints
These four buttons select a vehicle’s altitude as it flies over Mega-Primus. When you order your vehicles to do anything and deploy them in the city, they will take the
most direct route possible, which may not always coincide with your strategy. In X-COM:
Apocalypse you can have more strategic control over your vehicles by giving them waypoints
to follow.

126
p. p. 127
 X-COM Vehicles Tab

RULES OF ENGAGEMENT Attack Mode

Whenever your vehicles are executing orders in Mega-Primus, you can control their behavior
by setting the Rules of Engagement. Aggressive

Standard
Weapons On/Off
Often your vehicles are armed with an array of weaponry, some of which might be too
Defensive
powerful for the mission in hand. Rather than take these weapons off altogether, you can just
prohibit the use of that weapon by clicking on it in the X-COM Vehicles Tab. Evasive

Altitude

These four buttons set the Attack Mode of your vehicle:

Highest altitude
• Evasive—Avoid hostile craft at long range and do not fire on them. The craft will not take
High altitude a direct route to its destination if it moves close to an enemy craft.
• Defensive—Avoid hostile craft at medium range and only fire in retaliation.
Medium altitude • Standard—Avoid hostile craft at short range and fire on hostile craft if they are in weapon
range.
Low altitude • Aggressive—Do not avoid hostile craft at all, and fire on hostile craft if they are in weapon
range.

Waypoints
These four buttons select a vehicle’s altitude as it flies over Mega-Primus. When you order your vehicles to do anything and deploy them in the city, they will take the
most direct route possible, which may not always coincide with your strategy. In X-COM:
Apocalypse you can have more strategic control over your vehicles by giving them waypoints
to follow.

126
p. p. 127
 X-COM Vehicles Tab

A waypoint is a fixed map position that a craft will travel through before moving on to the However, this is not always possible, so here are a few tips for you when you engage UFOs in
next waypoint or the final destination. the city:

Note: it is best to add waypoints and plan strategy while you are in the Overhead Map View. • If possible, use multiple attack vehicles. Split these vehicles up and use the waypoint
system, so that they can attack from different angles.
The procedure for adding waypoints is as follows: • Plan your attacks in the Overhead Map View while the game is paused. Use the pause
facility to reevaluate your strategy on a regular basis.
• Select a vehicle or group of vehicles from the X-COM Vehicles Tab. • Disable active weapons until there is a clear path for missiles or beam weapons to fire.
• Using the Aggressive Attack Mode will give you greater control over your vehicles, but
• Select a vehicle order (i.e. Attack Hostile Unit).
you will need to pay careful attention to what is going on.
• To add waypoints, hold down c while clicking destination points on the map.
Occasionally, your craft will need to flee from UFOs. Low-altitude flying will allow you to use
• Release c and select your target (final destination).
high buildings for cover. The quickest way to escape from a UFO is to go to a nearby building
and hide. When the coast is clear, you can resume your attack.
Your vehicle will now complete its orders, only after following the route outlined by the
waypoints.
Note: experiment with different tactics, vehicles, weapons and equipment.

VEHICLE COMBAT AND

TACTICS SHOOTING DOWN UFOS
AND UFO MISSIONS

X-COM: Apocalypse allows you more scope to develop strategies in the Cityscape section of
When you are intercepting UFOs in Mega-Primus, it is worth remembering that you are not
the game. Because of the dense population of Mega-Primus, you should avoid combat in the
trying to destroy them—there are larger goals than merely protecting the city in the short
city (if possible). Any damage to buildings will upset the owning organizations and the
term. Your objective is to capture and research as much Alien technology as possible and the
Senate, causing you problems in the future.
only way to do that is to capture Aliens, their weapons and their UFO technology. You should
therefore aim to down UFOs rather than destroy them.

128
p. p. 129
 X-COM Vehicles Tab

A waypoint is a fixed map position that a craft will travel through before moving on to the However, this is not always possible, so here are a few tips for you when you engage UFOs in
next waypoint or the final destination. the city:

Note: it is best to add waypoints and plan strategy while you are in the Overhead Map View. • If possible, use multiple attack vehicles. Split these vehicles up and use the waypoint
system, so that they can attack from different angles.
The procedure for adding waypoints is as follows: • Plan your attacks in the Overhead Map View while the game is paused. Use the pause
facility to reevaluate your strategy on a regular basis.
• Select a vehicle or group of vehicles from the X-COM Vehicles Tab. • Disable active weapons until there is a clear path for missiles or beam weapons to fire.
• Using the Aggressive Attack Mode will give you greater control over your vehicles, but
• Select a vehicle order (i.e. Attack Hostile Unit).
you will need to pay careful attention to what is going on.
• To add waypoints, hold down c while clicking destination points on the map.
Occasionally, your craft will need to flee from UFOs. Low-altitude flying will allow you to use
• Release c and select your target (final destination).
high buildings for cover. The quickest way to escape from a UFO is to go to a nearby building
and hide. When the coast is clear, you can resume your attack.
Your vehicle will now complete its orders, only after following the route outlined by the
waypoints.
Note: experiment with different tactics, vehicles, weapons and equipment.

VEHICLE COMBAT AND

TACTICS SHOOTING DOWN UFOS
AND UFO MISSIONS

X-COM: Apocalypse allows you more scope to develop strategies in the Cityscape section of
When you are intercepting UFOs in Mega-Primus, it is worth remembering that you are not
the game. Because of the dense population of Mega-Primus, you should avoid combat in the
trying to destroy them—there are larger goals than merely protecting the city in the short
city (if possible). Any damage to buildings will upset the owning organizations and the
term. Your objective is to capture and research as much Alien technology as possible and the
Senate, causing you problems in the future.
only way to do that is to capture Aliens, their weapons and their UFO technology. You should
therefore aim to down UFOs rather than destroy them.

128
p. p. 129
 X-COM Vehicles Tab

When a UFO has crash-landed, you should send your Agents out to investigate the crash site, SOME THINGS TO
before the Aliens destroy the evidence (to protect the secrets of their technology). In order to REMEMBER
investigate a UFO Crash Site, you must send a single flying vehicle with Agents:

• Click to order your vehicle. 1. Your craft can run out of ammunition and fuel during combat. When this happens, you will
be given a suitable message. When your craft returns to Base, it will automatically be
Note: you can also click . rearmed and refuelled, unless there is not enough fuel or ammunition—in this case you
will also be informed.
• Click the crashed UFO to set your vehicle’s destination. Your Vehicle and Agents will now
make their way to the Crash Site. Note: vehicles will still use fuel even if they are hovering in the city. When a vehicle is low on
fuel, it will automatically return to Base.
Remember, only by killing and/or stunning the entire Alien crew will you capture the UFO
technology. 2. When vehicles are damaged in combat, they must be returned to one of the vehicle repair
bays. Repair bays can repair several vehicles at a time, but are less efficient when
Note: don’t forget that you will need a cargo module on the recovery craft in order to return overloaded. Ideally, you should only have one damaged vehicle in a repair bay, at any
the technology to your Base. one time.

130
p. p. 131
 X-COM Vehicles Tab

When a UFO has crash-landed, you should send your Agents out to investigate the crash site, SOME THINGS TO
before the Aliens destroy the evidence (to protect the secrets of their technology). In order to REMEMBER
investigate a UFO Crash Site, you must send a single flying vehicle with Agents:

• Click to order your vehicle. 1. Your craft can run out of ammunition and fuel during combat. When this happens, you will
be given a suitable message. When your craft returns to Base, it will automatically be
Note: you can also click . rearmed and refuelled, unless there is not enough fuel or ammunition—in this case you
will also be informed.
• Click the crashed UFO to set your vehicle’s destination. Your Vehicle and Agents will now
make their way to the Crash Site. Note: vehicles will still use fuel even if they are hovering in the city. When a vehicle is low on
fuel, it will automatically return to Base.
Remember, only by killing and/or stunning the entire Alien crew will you capture the UFO
technology. 2. When vehicles are damaged in combat, they must be returned to one of the vehicle repair
bays. Repair bays can repair several vehicles at a time, but are less efficient when
Note: don’t forget that you will need a cargo module on the recovery craft in order to return overloaded. Ideally, you should only have one damaged vehicle in a repair bay, at any
the technology to your Base. one time.

130
p. p. 131
 AGENT TAB

At the beginning of the game, X-COM has a small number of Agents capable of carrying out 2. Agent Name and Orders—This information area shows the presently highlighted Agent’s
investigations; generally these will be rookies. As the operation expands, these Agents will name and current orders.
gain more experience and be promoted. 3. —Orders an X-COM Agent towards a selected building.
4. —Orders an X-COM Agent to return to Base.
• Select the Agent Tab from the Central Information Panel in the Cityscape.
5. —Click this to take you to the Equip Agent Screen.
Agent Tab Agent List
6. —This button opens the Agent Location Screen.
7. —Click this to put a selected Agent into Combat Training (for full details see Training
later in this chapter).
8. —Click this to put a selected Agent into Psi-training (for full details see Training later in
this chapter).

EQUIP AGENT SCREEN

Agent Name
and Orders
Agents can be equipped anywhere in the city (providing there is enough equipment to equip
them with). Your Base will be where all bought equipment is stored, so it is probably better to
This Tab refers to the Agents you have at your disposal. The following is an icon summary: equip them there.

1. Agent List—The area across the top of the panel shows all of the Agents at your disposal. • Click from the Agent Tab in the Cityscape Screen to take you to the Equip Agent
Use the Scroll Arrows to look through the list. Click on an icon to select the Agent; click Screen.
again to center the display on the Agent. You can select multiple Agents by holding down
c and clicking on the Agent icons. Note: you can also click from the Bases Screen. Alternatively, you can open the Equip
Agent Screen by clicking Agent icons in the Alert Screen, the Buildings Screen and the
Squad Assignment Screen.

132
p. p. 133
 AGENT TAB

At the beginning of the game, X-COM has a small number of Agents capable of carrying out 2. Agent Name and Orders—This information area shows the presently highlighted Agent’s
investigations; generally these will be rookies. As the operation expands, these Agents will name and current orders.
gain more experience and be promoted. 3. —Orders an X-COM Agent towards a selected building.
4. —Orders an X-COM Agent to return to Base.
• Select the Agent Tab from the Central Information Panel in the Cityscape.
5. —Click this to take you to the Equip Agent Screen.
Agent Tab Agent List
6. —This button opens the Agent Location Screen.
7. —Click this to put a selected Agent into Combat Training (for full details see Training
later in this chapter).
8. —Click this to put a selected Agent into Psi-training (for full details see Training later in
this chapter).

EQUIP AGENT SCREEN

Agent Name
and Orders
Agents can be equipped anywhere in the city (providing there is enough equipment to equip
them with). Your Base will be where all bought equipment is stored, so it is probably better to
This Tab refers to the Agents you have at your disposal. The following is an icon summary: equip them there.

1. Agent List—The area across the top of the panel shows all of the Agents at your disposal. • Click from the Agent Tab in the Cityscape Screen to take you to the Equip Agent
Use the Scroll Arrows to look through the list. Click on an icon to select the Agent; click Screen.
again to center the display on the Agent. You can select multiple Agents by holding down
c and clicking on the Agent icons. Note: you can also click from the Bases Screen. Alternatively, you can open the Equip
Agent Screen by clicking Agent icons in the Alert Screen, the Buildings Screen and the
Squad Assignment Screen.

132
p. p. 133
 Agent Tab

EQUIPPING AGENTS
Equipment Areas
• Look through the Agent List using the Scroll Arrows.
Information
Panel Agent List

Menu Bar Agent Service

Record Agent List

Item Menu

The Equip Agent Screen consists of these main areas:

1. Agent—Centrally located, the Agent’s body diagram is used to fit Armor.

2. Equipment Areas—These relate to areas on the Agent’s body where equipment and
weaponry can be carried. • Click on the Agent you wish to equip. When an Agent is selected, their name and statistics
3. Agent List—This area allows you to cycle through all available Agents. will appear in the Information Panel.
4. Information Panel—The currently selected Agent’s portrait and statistics will be displayed
here. Also, clicking the icon in the top right corner of the panel allows you to access Note: you can rename your Agents by clicking on the existing name in the Information Panel.
the Agent’s Service Record. Type the new name and press e.
5. Item Menu—This area lists all available equipment or armor.
6. Menu Bar—You can select to display either Agent’s equipment or armor from here. • Click to fit the Agent with armor.
• Click if you wish to give the Agent guns or equipment.

A list of equipment or armor will now appear (depending on which you selected) in the Item
Menu.

134
p. p. 135
 Agent Tab

EQUIPPING AGENTS
Equipment Areas
• Look through the Agent List using the Scroll Arrows.
Information
Panel Agent List

Menu Bar Agent Service

Record Agent List

Item Menu

The Equip Agent Screen consists of these main areas:

1. Agent—Centrally located, the Agent’s body diagram is used to fit Armor.

2. Equipment Areas—These relate to areas on the Agent’s body where equipment and
weaponry can be carried. • Click on the Agent you wish to equip. When an Agent is selected, their name and statistics
3. Agent List—This area allows you to cycle through all available Agents. will appear in the Information Panel.
4. Information Panel—The currently selected Agent’s portrait and statistics will be displayed
here. Also, clicking the icon in the top right corner of the panel allows you to access Note: you can rename your Agents by clicking on the existing name in the Information Panel.
the Agent’s Service Record. Type the new name and press e.
5. Item Menu—This area lists all available equipment or armor.
6. Menu Bar—You can select to display either Agent’s equipment or armor from here. • Click to fit the Agent with armor.
• Click if you wish to give the Agent guns or equipment.

A list of equipment or armor will now appear (depending on which you selected) in the Item
Menu.

134
p. p. 135
 Agent Tab

• To locate the desired item, cycle through the Item Menu at the bottom of the screen.
AGENT LOCATION
• Drag and drop items from the Item Menu to the Equipment Area of your choice (on the SCREEN
Agent). To remove an item from an Agent, simply drag and drop the item to the Item
Menu. The item will now be returned to the stores. This screen is very similar to the Buildings Screen mentioned in the Cityscape section of the
Reference Guide. The screen informs you where your Agents are and what vehicles they are
You can equip multiple Agents with the same item to avoid unnecessary time spent in the assigned to.
Equip Agent Screen. To do this:
• Click from the Agent Tab.
• Select the Agents you wish to equip by holding down c and click a group of Agent
Icons. The Agent Location Screen consists of an Agent List and a Vehicle List.

The group of Agents will now be highlighted. The screen allows you to drag and drop Agents to and from vehicles to assign and de-assign
them.
• Drag and drop your selected item to an Equipment Area on the current Agent (as above).
All Agents will now be equipped with that item.
DEPLOYING AGENTS IN
MEGA-PRIMUS
Agents’ weaponry will be automatically loaded with ammunition of the correct type (if there is
some available). However, some weapons have different types of ammunition. To load a
weapon with alternative ammunition, drag and drop the ammunition to the appropriate Once your Agents are equipped and ready for action, you can send them out in Mega-Primus.
weapon.
• Click the Agent Tab in the Cityscape Screen.
When you are happy with your choices, click OK to leave this screen.

Note: after returning to Base from a Tactical Combat Mission, Agents will rearm themselves
automatically, providing there is enough equipment to do so. However, it is up to you to
make sure you equip your Agents with any additional ammunition or equipment.

136
p. p. 137
 Agent Tab

• To locate the desired item, cycle through the Item Menu at the bottom of the screen.
AGENT LOCATION
• Drag and drop items from the Item Menu to the Equipment Area of your choice (on the SCREEN
Agent). To remove an item from an Agent, simply drag and drop the item to the Item
Menu. The item will now be returned to the stores. This screen is very similar to the Buildings Screen mentioned in the Cityscape section of the
Reference Guide. The screen informs you where your Agents are and what vehicles they are
You can equip multiple Agents with the same item to avoid unnecessary time spent in the assigned to.
Equip Agent Screen. To do this:
• Click from the Agent Tab.
• Select the Agents you wish to equip by holding down c and click a group of Agent
Icons. The Agent Location Screen consists of an Agent List and a Vehicle List.

The group of Agents will now be highlighted. The screen allows you to drag and drop Agents to and from vehicles to assign and de-assign
them.
• Drag and drop your selected item to an Equipment Area on the current Agent (as above).
All Agents will now be equipped with that item.
DEPLOYING AGENTS IN
MEGA-PRIMUS
Agents’ weaponry will be automatically loaded with ammunition of the correct type (if there is
some available). However, some weapons have different types of ammunition. To load a
weapon with alternative ammunition, drag and drop the ammunition to the appropriate Once your Agents are equipped and ready for action, you can send them out in Mega-Primus.
weapon.
• Click the Agent Tab in the Cityscape Screen.
When you are happy with your choices, click OK to leave this screen.

Note: after returning to Base from a Tactical Combat Mission, Agents will rearm themselves
automatically, providing there is enough equipment to do so. However, it is up to you to
make sure you equip your Agents with any additional ammunition or equipment.

136
p. p. 137
 Agent Tab

Agent Tab THE ALERT SCREEN

Whenever there is an Alert in Mega-Primus, X-COM will be informed via the Alert Screen.
Alerts warn of Alien activity in all its guises.

The Alert Screen consists of these items:

Alert Information

• Click to highlight your Agents, then click . Menu Bar

Agent List
• Select the building you wish to investigate by clicking on it in the Overhead/Isometric Map
View.
Vehicle List
The Agent(s) will move immediately to that building. If the target building is connected by a
‘People Tube,’ then your Agents will use them; they may also choose to use a Taxi or go on
foot to reach their destination.

You can also assign Agents to X-COM craft and dispatch the vehicle to the target building.
1. Alert Information—This area displays the name of the building where the Alert is taking
place. It also informs you which organization owns the building.
Once Agents have reached their destination, an ‘Agent’ icon will appear over that building.
2. Agent List—The left of the screen lists all the unassigned Agents you have available to
investigate the cause of the Alert and their current location.
• Click the building to go into it and order your Agents.

Note: for further details, see Buildings Screen in the Cityscape section of this manual.

138
p. 139
p.
 Agent Tab

Agent Tab THE ALERT SCREEN

Whenever there is an Alert in Mega-Primus, X-COM will be informed via the Alert Screen.
Alerts warn of Alien activity in all its guises.

The Alert Screen consists of these items:

Alert Information

• Click to highlight your Agents, then click . Menu Bar

Agent List
• Select the building you wish to investigate by clicking on it in the Overhead/Isometric Map
View.
Vehicle List
The Agent(s) will move immediately to that building. If the target building is connected by a
‘People Tube,’ then your Agents will use them; they may also choose to use a Taxi or go on
foot to reach their destination.

You can also assign Agents to X-COM craft and dispatch the vehicle to the target building.
1. Alert Information—This area displays the name of the building where the Alert is taking
place. It also informs you which organization owns the building.
Once Agents have reached their destination, an ‘Agent’ icon will appear over that building.
2. Agent List—The left of the screen lists all the unassigned Agents you have available to
investigate the cause of the Alert and their current location.
• Click the building to go into it and order your Agents.

Note: for further details, see Buildings Screen in the Cityscape section of this manual.

138
p. 139
p.
 Agent Tab

3. Vehicle List—The right of the screen gives a list of all vehicles, the Agents assigned to • The vehicle will now be highlighted, as will all Agents assigned to that vehicle.
them and the vehicle’s present location.
4. Menu Bar—You can select to Investigate Incident, Equip Agent, Equip Vehicle or click Note: to send a vehicle with Agents already assigned, simply select the vehicle name. All of
OK to ignore the Alert and return to the Cityscape. the Agent names will be automatically highlighted.

Note: click an Agent or Vehicle icon to equip any of your Agents or vehicles. • Click . The vehicle will now proceed to the Alert Site and close the Alert Screen.

Investigate an Alert Note: to send Agents only, simply select Agents without assigning them to a vehicle.
To deploy a squad from this screen, simply select which Agents and which vehicles you wish
to dispatch (make sure you click their names and not the icons). Who and what you send will When your Agents have arrived at the Alert Site, a ‘window’ will open. The ‘window’ will
obviously depend on the type of Alert and how close they are to it. contain the Incident Type and Site information again; it will also prompt you to confirm
whether you wish to investigate or not.
If you deploy a vehicle to the Alert Site, then you may have to assign Agents to that vehicle.
To do this: • Click Yes to begin the investigation. You will be taken directly into a Tactical Combat
Mission.
• Drag and drop your Agents to the desired vehicle from the Agent List. The Agent will now
appear under the vehicle icon; this is now its vehicle assignment. • Click No to decline the investigation. You will now be returned to the Cityscape Screen.

Note: Agents already assigned to vehicles will be shown in the Vehicle List. Note: the more heavily armed and numerous an X-COM squad is, the more damage they will
cause at the Alert Site. Causing mass destruction to a building may make an organization
Now that your squad has been assigned, you will have to send that vehicle to the Alert Site. hostile, although being sent on official Alerts does diminish this possibility.

Note: you can send more than one vehicle to an Alert Site.

140
p. 141
p.
 Agent Tab

3. Vehicle List—The right of the screen gives a list of all vehicles, the Agents assigned to • The vehicle will now be highlighted, as will all Agents assigned to that vehicle.
them and the vehicle’s present location.
4. Menu Bar—You can select to Investigate Incident, Equip Agent, Equip Vehicle or click Note: to send a vehicle with Agents already assigned, simply select the vehicle name. All of
OK to ignore the Alert and return to the Cityscape. the Agent names will be automatically highlighted.

Note: click an Agent or Vehicle icon to equip any of your Agents or vehicles. • Click . The vehicle will now proceed to the Alert Site and close the Alert Screen.

Investigate an Alert Note: to send Agents only, simply select Agents without assigning them to a vehicle.
To deploy a squad from this screen, simply select which Agents and which vehicles you wish
to dispatch (make sure you click their names and not the icons). Who and what you send will When your Agents have arrived at the Alert Site, a ‘window’ will open. The ‘window’ will
obviously depend on the type of Alert and how close they are to it. contain the Incident Type and Site information again; it will also prompt you to confirm
whether you wish to investigate or not.
If you deploy a vehicle to the Alert Site, then you may have to assign Agents to that vehicle.
To do this: • Click Yes to begin the investigation. You will be taken directly into a Tactical Combat
Mission.
• Drag and drop your Agents to the desired vehicle from the Agent List. The Agent will now
appear under the vehicle icon; this is now its vehicle assignment. • Click No to decline the investigation. You will now be returned to the Cityscape Screen.

Note: Agents already assigned to vehicles will be shown in the Vehicle List. Note: the more heavily armed and numerous an X-COM squad is, the more damage they will
cause at the Alert Site. Causing mass destruction to a building may make an organization
Now that your squad has been assigned, you will have to send that vehicle to the Alert Site. hostile, although being sent on official Alerts does diminish this possibility.

Note: you can send more than one vehicle to an Alert Site.

140
p. 141
p.
 Agent Tab

There are some restrictions which have to be observed before putting an Agent into training.
TRAINING Firstly, any Agent that is injured will be unable to train until they are at full health. Additionally
you need the appropriate training facilities before training can begin. In the case of Psi-
Training, you will need a Psi-Gym and a Training Facility for Combat Training. (For full details
X-COM Agents, although the best in the city, are still able to improve their abilities. They on building either of these facilities, see Build Facilities in the Bases section.)
achieve this through dedicated training at the Base gyms. There are two ways in which an
Agent can improve themselves: Lastly, if any of the facilities are overused, then the efficiency of training will be reduced.

• Combat Training The result of training is that some Agent statistics will increase. Agents who have undergone
• Psi-Training Psi-training will increase their Psi-statistics. Agents undergoing Combat Training will improve
reactions, stamina, maximum health and current health. The percentage improvement will
The process for putting an Agent into Psi-Training is the same as putting one in for Combat also appear in the Agent’s Service Record (see Equip Agent Screen for further details).
Training.

TRAINING X-COM AGENTS

From the Cityscape Screen, click the Agent Tab (Central Information Panel) and select an
Agent icon by clicking on it.
When you first start the game, X-COM will already have a small number of quantum
• Click to put an Agent into Combat Training. physicists, biochemists and engineers. You will need these to succeed against the Aliens; only
• Click to put an Agent into Psi-Training. with a dedicated group of scientists and engineers carrying out quantum research,
biochemistry research and manufacturing will this be possible.
Whenever you highlight Agents in the Agent Tab, they will be labeled as “Training.” Once they
are set to train, Agents will do so whenever they are back at Base; training can only be done
while at Base. The Agent will, however, remain in active service the whole time.

142
p. p. 143
 Agent Tab

There are some restrictions which have to be observed before putting an Agent into training.
TRAINING Firstly, any Agent that is injured will be unable to train until they are at full health. Additionally
you need the appropriate training facilities before training can begin. In the case of Psi-
Training, you will need a Psi-Gym and a Training Facility for Combat Training. (For full details
X-COM Agents, although the best in the city, are still able to improve their abilities. They on building either of these facilities, see Build Facilities in the Bases section.)
achieve this through dedicated training at the Base gyms. There are two ways in which an
Agent can improve themselves: Lastly, if any of the facilities are overused, then the efficiency of training will be reduced.

• Combat Training The result of training is that some Agent statistics will increase. Agents who have undergone
• Psi-Training Psi-training will increase their Psi-statistics. Agents undergoing Combat Training will improve
reactions, stamina, maximum health and current health. The percentage improvement will
The process for putting an Agent into Psi-Training is the same as putting one in for Combat also appear in the Agent’s Service Record (see Equip Agent Screen for further details).
Training.

TRAINING X-COM AGENTS

From the Cityscape Screen, click the Agent Tab (Central Information Panel) and select an
Agent icon by clicking on it.
When you first start the game, X-COM will already have a small number of quantum
• Click to put an Agent into Combat Training. physicists, biochemists and engineers. You will need these to succeed against the Aliens; only
• Click to put an Agent into Psi-Training. with a dedicated group of scientists and engineers carrying out quantum research,
biochemistry research and manufacturing will this be possible.
Whenever you highlight Agents in the Agent Tab, they will be labeled as “Training.” Once they
are set to train, Agents will do so whenever they are back at Base; training can only be done
while at Base. The Agent will, however, remain in active service the whole time.

142
p. p. 143
 BIOCHEMISTRY,
ENGINEERING AND
QUANTUM PHYSICS TABS

RESEARCH AND
The Biochemistry, Engineering and Quantum Physics Tabs are essentially the same so we MANUFACTURE
will cover them collectively. They consist of:

1. Personnel List—This area shows all scientists or engineers at your disposal. Use the As you gather Alien artifacts from your investigations, you will need to research them in order
Scroll Arrows to look through the list. to find out more about the Aliens and their technology.
2. Name and Project—The name of the currently selected scientist or engineer, and the
project they are working on, will be displayed underneath the Personnel List. The RESEARCH AND MANUFACTURE SCREEN
percentage of project completion is also shown. Note: you cannot research or manufacture anything without the appropriate facilities. (For full
details on building facilities, see Build Facilities in the Bases Tab section of this manual.)
• Select either the Biochemistry Tab, Engineering Tab or Quantum Physics Tab from the That is, if you wish to manufacture something, you must first have an Engineering Workshop.
Central Information Panel in the Cityscape.
The Research and Manufacture Screen consists of these main elements:
• The Quantum Physics and Biochemistry Tabs have a icon. Click this to take you to the
Research and Manufacture Screen.
• The Engineering Tab has a icon. Click this to take you to the Research and
Manufacture Screen. Menu Bar
Base List
Note: you can also click in the Bases Screen. Facilities Menu

Information Panel

Available
Personnel List
Assigned
Personnel List

144
p. p. 145
 BIOCHEMISTRY,
ENGINEERING AND
QUANTUM PHYSICS TABS

RESEARCH AND
The Biochemistry, Engineering and Quantum Physics Tabs are essentially the same so we MANUFACTURE
will cover them collectively. They consist of:

1. Personnel List—This area shows all scientists or engineers at your disposal. Use the As you gather Alien artifacts from your investigations, you will need to research them in order
Scroll Arrows to look through the list. to find out more about the Aliens and their technology.
2. Name and Project—The name of the currently selected scientist or engineer, and the
project they are working on, will be displayed underneath the Personnel List. The RESEARCH AND MANUFACTURE SCREEN
percentage of project completion is also shown. Note: you cannot research or manufacture anything without the appropriate facilities. (For full
details on building facilities, see Build Facilities in the Bases Tab section of this manual.)
• Select either the Biochemistry Tab, Engineering Tab or Quantum Physics Tab from the That is, if you wish to manufacture something, you must first have an Engineering Workshop.
Central Information Panel in the Cityscape.
The Research and Manufacture Screen consists of these main elements:
• The Quantum Physics and Biochemistry Tabs have a icon. Click this to take you to the
Research and Manufacture Screen.
• The Engineering Tab has a icon. Click this to take you to the Research and
Manufacture Screen. Menu Bar
Base List
Note: you can also click in the Bases Screen. Facilities Menu

Information Panel

Available
Personnel List
Assigned
Personnel List

144
p. p. 145
 Agent Tab

1. Base List—This shows all of your Bases. From the Facilities Menu, click the laboratory or workshop from which you wish to work.
2. Menu Bar—There are two options: Assign Project and Stop Project. Click the Biochemistry Lab for a Biochemistry project, the Quantum Physics Lab for a
3. Facilities Menu—At the top right of the screen is a list of the labs and workshops at your Quantum project, or the Engineering Workshop if you wish to pursue a manufacturing project.
disposal:
• Biochemistry Lab A list of personnel icons will appear in the Available Personnel List, underneath the Base
• Quantum Physics Lab List. “No Project” will now be written in the Information Panel if no projects are assigned.
• Engineering Workshop
Each will have an accompanying number representing the number of personnel currently Before you assign scientists, you must first select a project.
assigned to that facility.
4. Information Panel—Project Names and percentage complete will be displayed in this • Click to open the Project Screen.
panel. Also, in this section you will be able to designate the number of items to be
• As you move the cursor over the projects, a brief project description will appear at the
manufactured, when you assign a manufacturing project.
bottom of the screen.
5. Assigned Personnel List—This is a list of personnel assigned to the selected lab or
workshop. • Click to select a project.
6. Available Personnel List—This is a list of available personnel for the selected lab or
• Click OK to start the project and return to the Research and Manufacture Screen.
workshop.
The project name will now be listed in the Information Panel along with a progress bar.
Assigning Projects
To assign a research/manufacturing project, first select the Base at which the project will be
Note: when you are doing manufacturing projects, a “Number to Build” bar will also appear in
carried out.
the Information Panel. Click and drag the Slider Bar until the number you want to build is
shown.
• Click on the Base of your choice from the Base List. The research and manufacturing
facilities at that Base will be shown in the Facilities Menu. To change your Base selection,
simply click on another Base.

146
p. p.147
 Agent Tab

1. Base List—This shows all of your Bases. From the Facilities Menu, click the laboratory or workshop from which you wish to work.
2. Menu Bar—There are two options: Assign Project and Stop Project. Click the Biochemistry Lab for a Biochemistry project, the Quantum Physics Lab for a
3. Facilities Menu—At the top right of the screen is a list of the labs and workshops at your Quantum project, or the Engineering Workshop if you wish to pursue a manufacturing project.
disposal:
• Biochemistry Lab A list of personnel icons will appear in the Available Personnel List, underneath the Base
• Quantum Physics Lab List. “No Project” will now be written in the Information Panel if no projects are assigned.
• Engineering Workshop
Each will have an accompanying number representing the number of personnel currently Before you assign scientists, you must first select a project.
assigned to that facility.
4. Information Panel—Project Names and percentage complete will be displayed in this • Click to open the Project Screen.
panel. Also, in this section you will be able to designate the number of items to be
• As you move the cursor over the projects, a brief project description will appear at the
manufactured, when you assign a manufacturing project.
bottom of the screen.
5. Assigned Personnel List—This is a list of personnel assigned to the selected lab or
workshop. • Click to select a project.
6. Available Personnel List—This is a list of available personnel for the selected lab or
• Click OK to start the project and return to the Research and Manufacture Screen.
workshop.
The project name will now be listed in the Information Panel along with a progress bar.
Assigning Projects
To assign a research/manufacturing project, first select the Base at which the project will be
Note: when you are doing manufacturing projects, a “Number to Build” bar will also appear in
carried out.
the Information Panel. Click and drag the Slider Bar until the number you want to build is
shown.
• Click on the Base of your choice from the Base List. The research and manufacturing
facilities at that Base will be shown in the Facilities Menu. To change your Base selection,
simply click on another Base.

146
p. p.147
 Biochemistry, Engineering and Quantum Physics Tabs

• Click to assign personnel from the Available Personnel List. They will now be Screen will now open to allow you to start new research or manufacture projects. Any new
repositioned in the Assigned Personnel List. research or manufacture projects which are now possible as a result of that research will
appear in the Project Screen.
Research on this project will now begin.
Manufacture Completed
• Click OK to close this screen. When manufacture of an item has been completed, the Manufacture Complete window will
appear on the Cityscape Screen. This displays both the name of the item and the location at
Stopping Projects which it has been manufactured.
You may wish to reassign personnel to a more important project. In this case, you can
temporarily stop one project in favor of another.

• Go to the Research and Manufacture Screen (see above for details) and select the lab
where the project is in progress, from the Facilities Menu, i.e. Biochemistry, Quantum
Physics or manufacture (see above for details).

Note: each lab or engineering workshop can only have one project at a time, so selecting a
lab or workshop will automatically select the project being worked on.

• Click . All resources and personnel from that project are now free to be used
elsewhere. The progress of the project you have stopped will be retained should staff be
reassigned at a later date.

Research Completed
When work has finished on a project, the Research Completed window will appear on the
Cityscape Screen. Click No to return to the Cityscape or click Yes to view the result of the
research (all research reports are available at any time in the UFOpaedia).
• Click OK to exit from this screen, after reading the results of your research. The Research

148
p. p. 149
 Biochemistry, Engineering and Quantum Physics Tabs

• Click to assign personnel from the Available Personnel List. They will now be Screen will now open to allow you to start new research or manufacture projects. Any new
repositioned in the Assigned Personnel List. research or manufacture projects which are now possible as a result of that research will
appear in the Project Screen.
Research on this project will now begin.
Manufacture Completed
• Click OK to close this screen. When manufacture of an item has been completed, the Manufacture Complete window will
appear on the Cityscape Screen. This displays both the name of the item and the location at
Stopping Projects which it has been manufactured.
You may wish to reassign personnel to a more important project. In this case, you can
temporarily stop one project in favor of another.

• Go to the Research and Manufacture Screen (see above for details) and select the lab
where the project is in progress, from the Facilities Menu, i.e. Biochemistry, Quantum
Physics or manufacture (see above for details).

Note: each lab or engineering workshop can only have one project at a time, so selecting a
lab or workshop will automatically select the project being worked on.

• Click . All resources and personnel from that project are now free to be used
elsewhere. The progress of the project you have stopped will be retained should staff be
reassigned at a later date.

Research Completed
When work has finished on a project, the Research Completed window will appear on the
Cityscape Screen. Click No to return to the Cityscape or click Yes to view the result of the
research (all research reports are available at any time in the UFOpaedia).
• Click OK to exit from this screen, after reading the results of your research. The Research

148
p. p. 149
 HOSTILE VEHICLES TAB ORGANIZATIONS TAB

• Select the Hostile Vehicles Tab from the Central Information Panel in the Cityscape. • Select the Organizations Tab from the Central Information Panel in the Cityscape.

This Tab contains a scroll list of all hostile vehicles in Mega-Primus. The Hostile Vehicles Tab The Organizations Tab consists of the following features:
allows you to select and track hostile vehicles when they appear in Mega-Primus.
1. A Scroll List of organizations operating in Mega-Primus.
• Double-click on any of the vehicle icons to center them in the Cityscape Display. 2. Six filter buttons: All, Allied, Friendly, Neutral, Unfriendly and Hostile. These buttons
allow you to sort organizations in the Scroll List, according to their relationship with
X-COM (i.e. clicking Allied will only display Allied organizations in the Scroll List).
3. Offer Settlement—This button allows you to offer a cash settlement to another
organization in an attempt to patch up diplomatic relations. This is a useful tool,
particularly if you upset one of your arms suppliers such as Marsec or Megapol.

Clicking any of the organization icons will cause that organization to be selected. Further
clicks on the icon will cause the display to be centered on the buildings owned by that
organization. This feature is very useful for coordinating investigations when organizations
have been infiltrated by the Aliens.

Note: if you are in the Overhead Map View, any buildings owned by the selected organization
will be highlighted. Hostile organizations will be Red, Unfriendly will be Dark Red, Neutral will
be Purple, Friendly will be Dark Yellow and Allied will be Bright Yellow.

150
p. p. 151
 HOSTILE VEHICLES TAB ORGANIZATIONS TAB

• Select the Hostile Vehicles Tab from the Central Information Panel in the Cityscape. • Select the Organizations Tab from the Central Information Panel in the Cityscape.

This Tab contains a scroll list of all hostile vehicles in Mega-Primus. The Hostile Vehicles Tab The Organizations Tab consists of the following features:
allows you to select and track hostile vehicles when they appear in Mega-Primus.
1. A Scroll List of organizations operating in Mega-Primus.
• Double-click on any of the vehicle icons to center them in the Cityscape Display. 2. Six filter buttons: All, Allied, Friendly, Neutral, Unfriendly and Hostile. These buttons
allow you to sort organizations in the Scroll List, according to their relationship with
X-COM (i.e. clicking Allied will only display Allied organizations in the Scroll List).
3. Offer Settlement—This button allows you to offer a cash settlement to another
organization in an attempt to patch up diplomatic relations. This is a useful tool,
particularly if you upset one of your arms suppliers such as Marsec or Megapol.

Clicking any of the organization icons will cause that organization to be selected. Further
clicks on the icon will cause the display to be centered on the buildings owned by that
organization. This feature is very useful for coordinating investigations when organizations
have been infiltrated by the Aliens.

Note: if you are in the Overhead Map View, any buildings owned by the selected organization
will be highlighted. Hostile organizations will be Red, Unfriendly will be Dark Red, Neutral will
be Purple, Friendly will be Dark Yellow and Allied will be Bright Yellow.

150
p. p. 151
 THE TACTICAL GAME

X-COM: Apocalypse offers the X-COM Commander more scope for action than either of the
previous X-COM games. Tactical combat can be initiated in many different scenarios. EQUIPPING AGENTS
BEFORE A TACTICAL
MISSION
Raids—X-COM Agents can raid buildings, steal equipment, attack security guards and inflict
structural damage causing economic difficulties for the owning organization.
Investigate Building—News that Aliens have been sighted at buildings will warrant X-COM You can equip your Agents anywhere where there is equipment. It is best for you to equip
searching the building for Aliens and Alien artifacts. them with the appropriate weapons and equipment before sending any of them on a mission
UFO Crash Site—After UFOs have been downed in the Cityscape, X-COM may choose to (for full details on equipping X-COM Agents, see Equipping Agents in the Agent Tab section
send a squad to investigate. of the manual).
X-COM Base Invasion—Hostile organizations and Aliens can, and will, invade your Base in an
attempt to shut you down. X-COM Agents must be prepared and equipped to repel any such Tip: ensure your Agents have enough guns and ammo to survive any surprise encounters.
attempts.
Alien World Incursion—When you have developed your information and technological
expertise far enough, you will be able to take the battle into the Alien Dimension. On the other BRIEFING SCREEN
side, there will be a host of as yet unknown objectives for the Agents of X-COM to complete.

Any Tactical Combat Mission can also be played in either the Real-Time or Turn-Based modes. Whenever you begin a Tactical Combat Mission, you will be given a briefing detailing your
objectives.

Start Real-Time
Game

Start Turn-Based
Game

152
p. 153
p.
 THE TACTICAL GAME

X-COM: Apocalypse offers the X-COM Commander more scope for action than either of the
previous X-COM games. Tactical combat can be initiated in many different scenarios. EQUIPPING AGENTS
BEFORE A TACTICAL
MISSION
Raids—X-COM Agents can raid buildings, steal equipment, attack security guards and inflict
structural damage causing economic difficulties for the owning organization.
Investigate Building—News that Aliens have been sighted at buildings will warrant X-COM You can equip your Agents anywhere where there is equipment. It is best for you to equip
searching the building for Aliens and Alien artifacts. them with the appropriate weapons and equipment before sending any of them on a mission
UFO Crash Site—After UFOs have been downed in the Cityscape, X-COM may choose to (for full details on equipping X-COM Agents, see Equipping Agents in the Agent Tab section
send a squad to investigate. of the manual).
X-COM Base Invasion—Hostile organizations and Aliens can, and will, invade your Base in an
attempt to shut you down. X-COM Agents must be prepared and equipped to repel any such Tip: ensure your Agents have enough guns and ammo to survive any surprise encounters.
attempts.
Alien World Incursion—When you have developed your information and technological
expertise far enough, you will be able to take the battle into the Alien Dimension. On the other BRIEFING SCREEN
side, there will be a host of as yet unknown objectives for the Agents of X-COM to complete.

Any Tactical Combat Mission can also be played in either the Real-Time or Turn-Based modes. Whenever you begin a Tactical Combat Mission, you will be given a briefing detailing your
objectives.

Start Real-Time
Game

Start Turn-Based
Game

152
p. 153
p.
 The Tactical Game

The Briefing Screen allows you to choose between Real-Time and Turn-Based modes of play.
SQUAD ASSIGNMENT
SCREEN
• Click to start a Real-Time Game. This mode provides a much more realistic simulation
of individual combat. It is more challenging than the Turn-Based Game.
• Click this to start a Turn-Based Tactical Game.
Equip Agent
The Turn-Based system allocates an amount of Time Units to each of your Agents. Every Information
action you perform uses Time Units; this means that your Agents can only move a certain Panel
distance before they expend those Time Units. It also means you can only shoot, pick things Agent Icons
up or use equipment if you have enough Time Units to perform that action.

Players of previous X-COM games will be familiar with this method. The Turn-Based system
in X-COM: Apocalypse has been improved since Terror From The Deep and now features Squads
Opportunity Movement as well as Opportunity Fire (more on this later).

After you have selected your chosen game mode, you will be taken to the Squad Assignment
Screen.
This screen allows you to assign Agents into squads.

SQUADS AND AGENTS

Your Agents will already be assigned to squads; the game makes default assignments
depending on the number of Agents you have deployed to the Tactical Combat Mission.

The six possible squads are displayed in the center of the screen. Each squad has space for
up to six Agents.

154
p. p. 155
 The Tactical Game

The Briefing Screen allows you to choose between Real-Time and Turn-Based modes of play.
SQUAD ASSIGNMENT
SCREEN
• Click to start a Real-Time Game. This mode provides a much more realistic simulation
of individual combat. It is more challenging than the Turn-Based Game.
• Click this to start a Turn-Based Tactical Game.
Equip Agent
The Turn-Based system allocates an amount of Time Units to each of your Agents. Every Information
action you perform uses Time Units; this means that your Agents can only move a certain Panel
distance before they expend those Time Units. It also means you can only shoot, pick things Agent Icons
up or use equipment if you have enough Time Units to perform that action.

Players of previous X-COM games will be familiar with this method. The Turn-Based system
in X-COM: Apocalypse has been improved since Terror From The Deep and now features Squads
Opportunity Movement as well as Opportunity Fire (more on this later).

After you have selected your chosen game mode, you will be taken to the Squad Assignment
Screen.
This screen allows you to assign Agents into squads.

SQUADS AND AGENTS

Your Agents will already be assigned to squads; the game makes default assignments
depending on the number of Agents you have deployed to the Tactical Combat Mission.

The six possible squads are displayed in the center of the screen. Each squad has space for
up to six Agents.

154
p. p. 155
 The Tactical Game

To change an Agent’s current squad assignment, drag and drop them from one squad to
another. THE TACTICAL SCREEN

Note: you can assign and reassign Agents as much as you wish.
The Tactical Screen is split into two areas: the Tactical Display and the Control Panel.
INFORMATION PANEL
As you move the cursor over Agents, you will see their statistics displayed in the Information TACTICAL DISPLAY
Panel; the boxes below indicate any weapons being carried in the Agents’ left and right
hands.

EQUIP AGENT Tactical Display

• Click from the Menu Bar to access the Equip Agent Screen and take a more detailed
look at an Agent’s weapons allocation.

Note: you can pass equipment and weapons from one Agent to another by dragging items
onto the ‘ground’ for other Agents to pick up.
Control Panel
It is also possible to access the Equip Agent Screen for a particular Agent by clicking with the
LMB on an Agent icon.

• Click OK to accept all squad assignments and start the Tactical Combat Mission.
The Tactical Display always defaults to the Isometric Map View which allows you to view the
Tactical Area and control your squads and Agents.

156
p. 157
p.
 The Tactical Game

To change an Agent’s current squad assignment, drag and drop them from one squad to
another. THE TACTICAL SCREEN

Note: you can assign and reassign Agents as much as you wish.
The Tactical Screen is split into two areas: the Tactical Display and the Control Panel.
INFORMATION PANEL
As you move the cursor over Agents, you will see their statistics displayed in the Information TACTICAL DISPLAY
Panel; the boxes below indicate any weapons being carried in the Agents’ left and right
hands.

EQUIP AGENT Tactical Display

• Click from the Menu Bar to access the Equip Agent Screen and take a more detailed
look at an Agent’s weapons allocation.

Note: you can pass equipment and weapons from one Agent to another by dragging items
onto the ‘ground’ for other Agents to pick up.
Control Panel
It is also possible to access the Equip Agent Screen for a particular Agent by clicking with the
LMB on an Agent icon.

• Click OK to accept all squad assignments and start the Tactical Combat Mission.
The Tactical Display always defaults to the Isometric Map View which allows you to view the
Tactical Area and control your squads and Agents.

156
p. 157
p.
 The Tactical Game

EXPLORING THE
TACTICAL DISPLAY

Moving the cursor to the edges of the screen will cause the display to scroll revealing more Overhead
Map View
of the Tactical Combat Area. At the start of each Tactical Combat Mission, time is
automatically paused so that you are able to look around and plan your initial moves.

Note: you can also use the cursor keys to scroll the Tactical Display.

LINE OF SIGHT
The Tactical Display will only show what is within your Agents’ line of sight. You must move
cautiously through the Tactical Area, seeking out hostile units and exploring unrevealed
terrain.
The Overhead Map View is an important strategic tool; it allows you to see a larger section of
Note: Agents may be deployed anywhere within the Tactical Area. the Tactical Area. Unlike the Isometric Map View, the Overhead Map View highlights
information and keeps you abreast of present activity—you are able to see at a glance the
OVERHEAD MAP VIEW location of hostile units, X-COM Agents and civilians. It is also used to show the waypoints
and destinations of all your Agents.
• Click to select the Overhead Map View. The Isometric Map View is replaced with
the Overhead Map View of the Tactical Area. Again, only the areas that your Agents have The Overhead Map View uses symbols to represent the following:
explored will be displayed.
X-COM Agents - Yellow
To scroll the Overhead Map View, move your cursor to the edge of the screen; the Overhead Hostile Units - Red
Map will now scroll in that direction. Neutral Units - Purple

Note: you can also use the cursor keys to scroll the map.

158
p. p. 159
 The Tactical Game

EXPLORING THE
TACTICAL DISPLAY

Moving the cursor to the edges of the screen will cause the display to scroll revealing more Overhead
Map View
of the Tactical Combat Area. At the start of each Tactical Combat Mission, time is
automatically paused so that you are able to look around and plan your initial moves.

Note: you can also use the cursor keys to scroll the Tactical Display.

LINE OF SIGHT
The Tactical Display will only show what is within your Agents’ line of sight. You must move
cautiously through the Tactical Area, seeking out hostile units and exploring unrevealed
terrain.
The Overhead Map View is an important strategic tool; it allows you to see a larger section of
Note: Agents may be deployed anywhere within the Tactical Area. the Tactical Area. Unlike the Isometric Map View, the Overhead Map View highlights
information and keeps you abreast of present activity—you are able to see at a glance the
OVERHEAD MAP VIEW location of hostile units, X-COM Agents and civilians. It is also used to show the waypoints
and destinations of all your Agents.
• Click to select the Overhead Map View. The Isometric Map View is replaced with
the Overhead Map View of the Tactical Area. Again, only the areas that your Agents have The Overhead Map View uses symbols to represent the following:
explored will be displayed.
X-COM Agents - Yellow
To scroll the Overhead Map View, move your cursor to the edge of the screen; the Overhead Hostile Units - Red
Map will now scroll in that direction. Neutral Units - Purple

Note: you can also use the cursor keys to scroll the map.

158
p. p. 159
 The Tactical Game

Solid arrows show units on the present level; large outline arrows show units above the 1. Message Bar—Any messages received by X-COM during Tactical Combat Missions will
current level; small outline arrows show units below the current level. The direction of the appear in the Message Bar.
arrow indicates the direction that a unit is facing. —Click this to center the Tactical Display on the subject of any message that appears
in the Message Bar.
White Diamond box—this outlines the area you will see when you return to the Isometric
—Click this to take you to the Message History Screen. This screen contains a list of
Map View.
messages you have received. Click to return to the Tactical Display. This display will
now be centered on the subject of the selected message.
• Click to return to the Isometric Map View.
2. —Click this to toggle the camera mode. Clicking once stops the display tracking units
in the Tactical Display. This allows you to center the display anywhere. Notice that the
THE CONTROL PANEL icon will change to show you that tracking is disabled. Clicking the button a second time
enables tracking again. Any selected unit will now be centered on in the Tactical Display.
3. —Click this to toggle between the Overhead Map View and the default Isometric
Squad Icons Message Bar Agent Icons Map View.
4. —Click this to display different levels of your choice.
—Level Mode 1 hides everything above and below the currently selected level, which
is why some rooms in the building appear to have no roof.
—Level Mode 2 (the default setting) displays the level you are on and any levels
below.
—Level Mode 3 displays all levels at once producing a complete 3-D picture.
5. —Click this to review your Mission Briefing.
Formations Time Controls
6. —Click this to take you to the Options Screen.

The Control Panel is located below the Tactical Display; it contains many icons and buttons
that allow you to manage your Agents while they are on Tactical Combat Missions.

160
p. p. 161
 The Tactical Game

Solid arrows show units on the present level; large outline arrows show units above the 1. Message Bar—Any messages received by X-COM during Tactical Combat Missions will
current level; small outline arrows show units below the current level. The direction of the appear in the Message Bar.
arrow indicates the direction that a unit is facing. —Click this to center the Tactical Display on the subject of any message that appears
in the Message Bar.
White Diamond box—this outlines the area you will see when you return to the Isometric
—Click this to take you to the Message History Screen. This screen contains a list of
Map View.
messages you have received. Click to return to the Tactical Display. This display will
now be centered on the subject of the selected message.
• Click to return to the Isometric Map View.
2. —Click this to toggle the camera mode. Clicking once stops the display tracking units
in the Tactical Display. This allows you to center the display anywhere. Notice that the
THE CONTROL PANEL icon will change to show you that tracking is disabled. Clicking the button a second time
enables tracking again. Any selected unit will now be centered on in the Tactical Display.
3. —Click this to toggle between the Overhead Map View and the default Isometric
Squad Icons Message Bar Agent Icons Map View.
4. —Click this to display different levels of your choice.
—Level Mode 1 hides everything above and below the currently selected level, which
is why some rooms in the building appear to have no roof.
—Level Mode 2 (the default setting) displays the level you are on and any levels
below.
—Level Mode 3 displays all levels at once producing a complete 3-D picture.
5. —Click this to review your Mission Briefing.
Formations Time Controls
6. —Click this to take you to the Options Screen.

The Control Panel is located below the Tactical Display; it contains many icons and buttons
that allow you to manage your Agents while they are on Tactical Combat Missions.

160
p. p. 161
 The Tactical Game

7. Double-click the Squad Icons to select and highlight squads. Each icon will display the Ammo Turn-Based
number of Agents in the squad. To deselect squads, simply click on the icon with the Type Hands Area Buttons
RMB.
8. Formations—There are two squad formations you can use:

—Click this to move your squads in Group-Formation so they cover a wide area.
—Click this to move your squads in Single-File.

9. Click the Agent Icons to select Agents. Each icon displays that Agent’s health. When Remaining Accuracy Level
hostile units are sighted by an Agent, a small indicator is displayed at the top of the Agent Ammo Display Indicator
Icon.
10. —This allows you to assign Agents to different squads during Tactical Combat 12. Hands Area—There are two ‘hand’ areas displaying the contents of the left and right
Missions. Select one or more Agents and then click . Now click on a Squad Icon hands. This area also contains these items:
and the selected Agents will be reassigned to that squad.
—Click this to go to the Equip Agent Screen.
11. Time Controls—Four buttons are provided to give you control over the pace of the game.
—Click this to pause the game. Accuracy display—The bar below each hand will show the accuracy of any weapons held in
—Click this to make time pass slowly, allowing you more time to react. that hand. The bars will become filled towards the center of the screen to indicate an Agent’s
—Click this to make time pass at its Normal Speed. accuracy with the currently held weapon. The closer the filled bar is to the center of the
—Click this to make time pass at Double-Speed. screen, the better an Agent’s accuracy.

Note: if you are playing the Turn-Based game, you will notice that there are an extra five Ammo Type—The box to the left/right of each hand displays the type of ammo that is loaded
buttons which replace the Time Controls. These are used to reserve Time Units for Shooting in the current weapon.
and Kneeling (see Turn-Based Tactical Game for details). There is also an End Turn button.

162
p. p. 163
 The Tactical Game

7. Double-click the Squad Icons to select and highlight squads. Each icon will display the Ammo Turn-Based
number of Agents in the squad. To deselect squads, simply click on the icon with the Type Hands Area Buttons
RMB.
8. Formations—There are two squad formations you can use:

—Click this to move your squads in Group-Formation so they cover a wide area.
—Click this to move your squads in Single-File.

9. Click the Agent Icons to select Agents. Each icon displays that Agent’s health. When Remaining Accuracy Level
hostile units are sighted by an Agent, a small indicator is displayed at the top of the Agent Ammo Display Indicator
Icon.
10. —This allows you to assign Agents to different squads during Tactical Combat 12. Hands Area—There are two ‘hand’ areas displaying the contents of the left and right
Missions. Select one or more Agents and then click . Now click on a Squad Icon hands. This area also contains these items:
and the selected Agents will be reassigned to that squad.
—Click this to go to the Equip Agent Screen.
11. Time Controls—Four buttons are provided to give you control over the pace of the game.
—Click this to pause the game. Accuracy display—The bar below each hand will show the accuracy of any weapons held in
—Click this to make time pass slowly, allowing you more time to react. that hand. The bars will become filled towards the center of the screen to indicate an Agent’s
—Click this to make time pass at its Normal Speed. accuracy with the currently held weapon. The closer the filled bar is to the center of the
—Click this to make time pass at Double-Speed. screen, the better an Agent’s accuracy.

Note: if you are playing the Turn-Based game, you will notice that there are an extra five Ammo Type—The box to the left/right of each hand displays the type of ammo that is loaded
buttons which replace the Time Controls. These are used to reserve Time Units for Shooting in the current weapon.
and Kneeling (see Turn-Based Tactical Game for details). There is also an End Turn button.

162
p. p. 163
 The Tactical Game

Remaining Ammo—The vertical bar next to the Agent’s hand indicates how much ammo is —Click this to order your selected Agent to Crawl. The advantages of crawling are that
left in the weapon carried in that hand. the Agent is a harder target to hit and a more accurate shot (when stationary).
—Click this to order your selected Agent to Walk.
—Click on this to throw any item currently held in the associated ‘hand.’
—Click this to order your selected Agent to Run.
—Click on this to drop any item currently held in the associated ‘hand.’
15. Attack Modes. There are three Attack Modes:
Level Indicator—Each numbered block in the bar represents a level of the Tactical Area. Click
any of these ‘blocks’ to change the level you are currently viewing. —Safe Mode. Click this to order your Agents to seek safety over confrontation.
—Cautious Mode. Click this to order your Agents to use cover and engage the enemy
13. —Click these to move the view up/down a level. with caution.
—Aggressive Mode. Click this to order your Agents to ignore risks and aggressively seek
confrontation.

16. Shot-Types. The four different Shot Types control how your Agents will use their
weapons.

Movement Attack
—Click this to prevent your Agents from taking a shot.
Shot-Types Orders Modes —Click this to make your Agent favor an Aimed-Shot. This is more accurate than Snap or
Auto-shots, but the rate of fire is slower.
14. Movement Orders—There are four movement orders:
—Click this to make your Agent favor a Snap-Shot. This is an unaimed shot in the
target’s general direction. It is most useful at short range.
—Click this to order your selected Agent to assume a kneeling position when they are not
—Click this to make your Agent fire a short burst of shots in the target’s general direction.
moving. Click the button again and Agents will now return to the position dictated by their
Again, this is most useful at short ranges.
current Movement Orders. The advantage of kneeling is that your Agent is less visible to
hostile units and can fire more accurately.

164
p. p.165
 The Tactical Game

Remaining Ammo—The vertical bar next to the Agent’s hand indicates how much ammo is —Click this to order your selected Agent to Crawl. The advantages of crawling are that
left in the weapon carried in that hand. the Agent is a harder target to hit and a more accurate shot (when stationary).
—Click this to order your selected Agent to Walk.
—Click on this to throw any item currently held in the associated ‘hand.’
—Click this to order your selected Agent to Run.
—Click on this to drop any item currently held in the associated ‘hand.’
15. Attack Modes. There are three Attack Modes:
Level Indicator—Each numbered block in the bar represents a level of the Tactical Area. Click
any of these ‘blocks’ to change the level you are currently viewing. —Safe Mode. Click this to order your Agents to seek safety over confrontation.
—Cautious Mode. Click this to order your Agents to use cover and engage the enemy
13. —Click these to move the view up/down a level. with caution.
—Aggressive Mode. Click this to order your Agents to ignore risks and aggressively seek
confrontation.

16. Shot-Types. The four different Shot Types control how your Agents will use their
weapons.

Movement Attack
—Click this to prevent your Agents from taking a shot.
Shot-Types Orders Modes —Click this to make your Agent favor an Aimed-Shot. This is more accurate than Snap or
Auto-shots, but the rate of fire is slower.
14. Movement Orders—There are four movement orders:
—Click this to make your Agent favor a Snap-Shot. This is an unaimed shot in the
target’s general direction. It is most useful at short range.
—Click this to order your selected Agent to assume a kneeling position when they are not
—Click this to make your Agent fire a short burst of shots in the target’s general direction.
moving. Click the button again and Agents will now return to the position dictated by their
Again, this is most useful at short ranges.
current Movement Orders. The advantage of kneeling is that your Agent is less visible to
hostile units and can fire more accurately.

164
p. p.165
 The Tactical Game

SELECTING SQUADS MOVING SQUADS

In X-COM: Apocalypse, you can control Agents individually or collectively as squads. You may After selecting a squad, you can move it in Single-File or in a ‘Group’ Formation. ‘Group’
have up to six squads in the Tactical Area at any one time. Formation is selected as the default movement mode because it allows your Agents to cover a
wider area, aiding the exploration of unrevealed terrain.
The Squad Icons indicate the number of Agents in each squad; each squad can contain up to
six Agents. In the Tactical Game, the cursor is accompanied by a green box as you move it around the
Isometric Map View. You may notice that the box turns yellow if you move it over a square
• Double-click a Squad Icon to select a squad. To deselect the squad, simply click the icon occupied by one of your Agents. This box is used to set the destinations for your Agents.
again with the RMB.
• Select a squad (as above). Now, move the cursor to a position a short way in front of the
When you select a squad, an orange marker is displayed above each Agent in that squad (in squad and click the LMB. Yellow arrows will appear to mark the destination of your
the Isometric Map View). The squad number is displayed in the center of the markers. The Agents.
Agent’s present state of health is shown by the Health Bar positioned along the top of the
marker. In the lower half of the marker, the Agent’s Attack Mode is indicated by a colored bar. Note: if you are playing in the Real-Time Game and your Agents don’t move when you have
Blue represents Safe Mode, Green is used to show Cautious Mode and Red indicates given them orders, check to see if time is paused. Click if this is the case. Beware! The
Aggressive Mode. Aliens can now move and your Agents may be attacked at any time.

One of the Agent markers will be yellow; this is the Agent whose equipment appears centrally • To stop your Agents before they reach their designated destinations, simply click the RMB
in the Hands Area. The currently displayed Attack Mode, Shot-Type and movement orders in the Tactical Display.
refer to this unit only.
• Move the cursor to a position away from your Agents and press the Right Mouse Button.
Note: in the Turn-Based Game, the number of Time Units an Agent has is displayed above Your Agents will turn to face the direction of the cursor. This feature is very useful when
the marker. As Agents use Time Units, this number will diminish. When this number is 0 or exploring the Tactical Areas.
too low to perform any actions, you will be told that the Agent has run out of Time Units.

166
p. p. 167
 The Tactical Game

SELECTING SQUADS MOVING SQUADS

In X-COM: Apocalypse, you can control Agents individually or collectively as squads. You may After selecting a squad, you can move it in Single-File or in a ‘Group’ Formation. ‘Group’
have up to six squads in the Tactical Area at any one time. Formation is selected as the default movement mode because it allows your Agents to cover a
wider area, aiding the exploration of unrevealed terrain.
The Squad Icons indicate the number of Agents in each squad; each squad can contain up to
six Agents. In the Tactical Game, the cursor is accompanied by a green box as you move it around the
Isometric Map View. You may notice that the box turns yellow if you move it over a square
• Double-click a Squad Icon to select a squad. To deselect the squad, simply click the icon occupied by one of your Agents. This box is used to set the destinations for your Agents.
again with the RMB.
• Select a squad (as above). Now, move the cursor to a position a short way in front of the
When you select a squad, an orange marker is displayed above each Agent in that squad (in squad and click the LMB. Yellow arrows will appear to mark the destination of your
the Isometric Map View). The squad number is displayed in the center of the markers. The Agents.
Agent’s present state of health is shown by the Health Bar positioned along the top of the
marker. In the lower half of the marker, the Agent’s Attack Mode is indicated by a colored bar. Note: if you are playing in the Real-Time Game and your Agents don’t move when you have
Blue represents Safe Mode, Green is used to show Cautious Mode and Red indicates given them orders, check to see if time is paused. Click if this is the case. Beware! The
Aggressive Mode. Aliens can now move and your Agents may be attacked at any time.

One of the Agent markers will be yellow; this is the Agent whose equipment appears centrally • To stop your Agents before they reach their designated destinations, simply click the RMB
in the Hands Area. The currently displayed Attack Mode, Shot-Type and movement orders in the Tactical Display.
refer to this unit only.
• Move the cursor to a position away from your Agents and press the Right Mouse Button.
Note: in the Turn-Based Game, the number of Time Units an Agent has is displayed above Your Agents will turn to face the direction of the cursor. This feature is very useful when
the marker. As Agents use Time Units, this number will diminish. When this number is 0 or exploring the Tactical Areas.
too low to perform any actions, you will be told that the Agent has run out of Time Units.

166
p. p. 167
 The Tactical Game

Note: in the Turn-Based Game, if the Agent hasn’t enough Time Units or if Time Units are There are also several ways to select groups of multiple Agents:
reserved for other actions, the Agent will not be able to complete the move until X-COM’s
next Turn. If the destination is a long distance away, it may take the Agent several Turns to • Click and hold the LMB and move the Green cursor box over a number of your Agents in
complete. the Tactical Display.

Whenever your Agents have run out of Time Units, simply click . After the Aliens have • Hold down c and click the Agents of your choice in the Isometric Map View.
taken their Turn, your Agents will have all of their Time Units returned to them, allowing you
• Hold down c and click individual Agent Icons in the Control Panel.
to play on. During the Aliens’ Turn, the Hidden Movement Screen will appear when Aliens are
moving out of sight of X-COM Agents, although any Alien units sighted by X-COM Agents will
be shown. MOVING INDIVIDUAL
AGENTS
Tip: it is best to end your Turn when your Agents are in cover, close to pipes, tables or other
large objects. After selecting an Agent (see above), you are now ready to move them.

SELECTING INDIVIDUAL • Click on a destination a short way in front of the Agent.

AGENTS
A single yellow arrow will appear to show the Agent’s destination.
There are two ways to select an Agent from the current squad.
Note: Aliens or hostile units may be encountered at any time. Beware: ensure you keep an eye
on your squad!
• Click on any of the Agent Icons (faces) on the right of the Control Panel; a yellow marker
is displayed above the head of the Agent in the Isometric Map View indicating who is
selected. To deselect other Agents, simply right-click on their Agent icons.

• Move the green cursor box over an unselected Agent in the Isometric Map View and the
box should change to yellow. Click on the Agent. The marker should disappear from the
first Agent and now appear above the second Agent. Clicking on a single Agent in the
Isometric Map View automatically causes all other Agents to be deselected.

168
p. p. 169
 The Tactical Game

Note: in the Turn-Based Game, if the Agent hasn’t enough Time Units or if Time Units are There are also several ways to select groups of multiple Agents:
reserved for other actions, the Agent will not be able to complete the move until X-COM’s
next Turn. If the destination is a long distance away, it may take the Agent several Turns to • Click and hold the LMB and move the Green cursor box over a number of your Agents in
complete. the Tactical Display.

Whenever your Agents have run out of Time Units, simply click . After the Aliens have • Hold down c and click the Agents of your choice in the Isometric Map View.
taken their Turn, your Agents will have all of their Time Units returned to them, allowing you
• Hold down c and click individual Agent Icons in the Control Panel.
to play on. During the Aliens’ Turn, the Hidden Movement Screen will appear when Aliens are
moving out of sight of X-COM Agents, although any Alien units sighted by X-COM Agents will
be shown. MOVING INDIVIDUAL
AGENTS
Tip: it is best to end your Turn when your Agents are in cover, close to pipes, tables or other
large objects. After selecting an Agent (see above), you are now ready to move them.

SELECTING INDIVIDUAL • Click on a destination a short way in front of the Agent.

AGENTS
A single yellow arrow will appear to show the Agent’s destination.
There are two ways to select an Agent from the current squad.
Note: Aliens or hostile units may be encountered at any time. Beware: ensure you keep an eye
on your squad!
• Click on any of the Agent Icons (faces) on the right of the Control Panel; a yellow marker
is displayed above the head of the Agent in the Isometric Map View indicating who is
selected. To deselect other Agents, simply right-click on their Agent icons.

• Move the green cursor box over an unselected Agent in the Isometric Map View and the
box should change to yellow. Click on the Agent. The marker should disappear from the
first Agent and now appear above the second Agent. Clicking on a single Agent in the
Isometric Map View automatically causes all other Agents to be deselected.

168
p. p. 169
 The Tactical Game

• If you want your Agent to move to a square occupied by another Agent, simply hold down Note: the blue cross will appear as a blue circle if the selected destination is above or below
a and click the destination. If the Agent occupying the square is not moved, then the the level currently being viewed.
second Agent will move as close as possible. Only when the first Agent moves can the
second Agent move into that position. This is useful for moving Agents strategically along Agents will take the most direct route to their new destination (depending on their orders),
a corridor. which may not be in line with your strategy. The Overhead Map View allows you to select
waypoints for your Agents. A waypoint is a fixed map position that an Agent will travel
• To stop Agents before they reach their designated destinations, simply click the RMB in through before moving on to the next waypoint or the final destination. This allows you to
the Tactical Display. move your Agent to a Destination by your own route.
• To make the selected Agent turn around, move the cursor to a position within the Tactical
Display and click the RMB. The Agent will now turn to face the direction of the cursor. The procedure for adding waypoints is as follows:

Note: doors will open automatically, when you stand next to them. • Select an Agent or group of Agents.

• To add waypoints, hold down c while clicking destination points on the map.
MOVING AGENTS AND
SETTING WAYPOINTS IN Your Agent will now move to the new destination only after following the route outlined by the
THE OVERHEAD MAP VIEW
waypoints.

• Click to enter the Overhead Map View. Note: you can select multiple Agents by pressing and holding c while you click the Agents
you wish to select. You can also select Agents by clicking on the Agent Icons in the Control
• Click any of your X-COM Agents. They will be highlighted with a yellow box. Panel. To deselect Agents, right-click on the Agent Icon(s).

• Click a destination on the map to move the selected Agent. A blue cross will appear at the
destination; the yellow line shows the Agent’s distance left to travel and the route they are
taking. You can change the target destination simply by selecting a new one.

170
p. 171
p.
 The Tactical Game

• If you want your Agent to move to a square occupied by another Agent, simply hold down Note: the blue cross will appear as a blue circle if the selected destination is above or below
a and click the destination. If the Agent occupying the square is not moved, then the the level currently being viewed.
second Agent will move as close as possible. Only when the first Agent moves can the
second Agent move into that position. This is useful for moving Agents strategically along Agents will take the most direct route to their new destination (depending on their orders),
a corridor. which may not be in line with your strategy. The Overhead Map View allows you to select
waypoints for your Agents. A waypoint is a fixed map position that an Agent will travel
• To stop Agents before they reach their designated destinations, simply click the RMB in through before moving on to the next waypoint or the final destination. This allows you to
the Tactical Display. move your Agent to a Destination by your own route.
• To make the selected Agent turn around, move the cursor to a position within the Tactical
Display and click the RMB. The Agent will now turn to face the direction of the cursor. The procedure for adding waypoints is as follows:

Note: doors will open automatically, when you stand next to them. • Select an Agent or group of Agents.

• To add waypoints, hold down c while clicking destination points on the map.
MOVING AGENTS AND
SETTING WAYPOINTS IN Your Agent will now move to the new destination only after following the route outlined by the
THE OVERHEAD MAP VIEW
waypoints.

• Click to enter the Overhead Map View. Note: you can select multiple Agents by pressing and holding c while you click the Agents
you wish to select. You can also select Agents by clicking on the Agent Icons in the Control
• Click any of your X-COM Agents. They will be highlighted with a yellow box. Panel. To deselect Agents, right-click on the Agent Icon(s).

• Click a destination on the map to move the selected Agent. A blue cross will appear at the
destination; the yellow line shows the Agent’s distance left to travel and the route they are
taking. You can change the target destination simply by selecting a new one.

170
p. 171
p.
 The Tactical Game

To move an entire squad, simply select a squad by double-clicking a Squad Icon. A yellow
highlighter box will appear around each member of that squad. As before, just click a ENGAGING THE ENEMY
AND WINNING TACTICAL
destination and the Agents will move towards it. COMBAT MISSIONS

• Click to return to the Isometric Map View.

USING COVER
Using the available cover in the terrain is essential for improving your tactics. The best
MAKING AN AGENT method is to position your Agents next to a space which provides cover from enemy fire.
JUMP
The Attack Modes are used to influence the way Agents react to their surroundings. Agents in
If there is a hole in the floor or some other obstruction caused by an explosion, providing it is Cautious Mode will duck in and out of cover automatically, if it is nearby. (If they are
not huge, the Agent will be able to jump across. positioned behind low cover, Agents may kneel down to avoid enemy fire and stand to return
fire.)
• To order an Agent to jump, hold down J and click on the adjacent square. The Agent
should now jump. Agents using Aggressive Mode will favor confrontation, regardless of safety.

Note: Use this carefully, as jumping down multiple levels may cause Agents to damage Agents in Safe Mode will always attempt to find cover.
themselves (depending on the armor that they are wearing).
Tip: set up ambushes for the Aliens; try to use areas where Agents can only be attacked from
one direction and use Agents to cover each other.
FLYING
USING THE MOTION SCANNER
The motion scanner can be used to help you track down enemy units. To use it, make sure
If an Agent is equipped with the Marsec Elerium Body Armor, they will be able to fly. The that it is in one of your Agent’s hands.
Agent will fly if it helps get to a destination more quickly. To make an Agent fly, simply select
a destination in the air.

172
p. p.173
 The Tactical Game

To move an entire squad, simply select a squad by double-clicking a Squad Icon. A yellow
highlighter box will appear around each member of that squad. As before, just click a ENGAGING THE ENEMY
AND WINNING TACTICAL
destination and the Agents will move towards it. COMBAT MISSIONS

• Click to return to the Isometric Map View.

USING COVER
Using the available cover in the terrain is essential for improving your tactics. The best
MAKING AN AGENT method is to position your Agents next to a space which provides cover from enemy fire.
JUMP
The Attack Modes are used to influence the way Agents react to their surroundings. Agents in
If there is a hole in the floor or some other obstruction caused by an explosion, providing it is Cautious Mode will duck in and out of cover automatically, if it is nearby. (If they are
not huge, the Agent will be able to jump across. positioned behind low cover, Agents may kneel down to avoid enemy fire and stand to return
fire.)
• To order an Agent to jump, hold down J and click on the adjacent square. The Agent
should now jump. Agents using Aggressive Mode will favor confrontation, regardless of safety.

Note: Use this carefully, as jumping down multiple levels may cause Agents to damage Agents in Safe Mode will always attempt to find cover.
themselves (depending on the armor that they are wearing).
Tip: set up ambushes for the Aliens; try to use areas where Agents can only be attacked from
one direction and use Agents to cover each other.
FLYING
USING THE MOTION SCANNER
The motion scanner can be used to help you track down enemy units. To use it, make sure
If an Agent is equipped with the Marsec Elerium Body Armor, they will be able to fly. The that it is in one of your Agent’s hands.
Agent will fly if it helps get to a destination more quickly. To make an Agent fly, simply select
a destination in the air.

172
p. p.173
 The Tactical Game

• Click on the Motion Scanner in the Hands Area. The Motion Scanner Display will appear • Click to pause and center on the hostile unit.
in the top right corner of the screen.
Note: you can prevent the game from pausing by switching the Message Panel off from the
The Motion Scanner Display shows moving objects as bright white blips. The arrow in the Options Screen. Active messages are accompanied by a Tick. To switch the Message Panel
center of the display shows the current facing of the Agent holding the scanner. off for that message, click on the Tick and a Cross will appear in its place indicating that the
message is now disabled. All messages will still appear in the Message Bar but will not cause
Note: the scanner shows moving objects. It does not discriminate between hostile units and the game to pause when they appear.
X-COM.
Hostile units will be spotted if there is no terrain obstructing your Agent’s line of sight.

ENEMY SIGHTED! Note: smoke may obstruct line of sight depending on how thick it is.

When a hostile unit is spotted, ‘Alien Sighted’ Indicators will appear above the Agent’s icon SHOOTING
in the Control Panel. The number of small circles represents the number of Aliens spotted by
that Agent.
Your Agents will automatically shoot at enemy units if they see them. You must, of course,
• Click the ‘Alien Sighted’ Indicators to center the Tactical Display on the relevant Alien. make sure that there is a loaded weapon in one of the Agent’s hands. The way in which an
Agent reacts during engagements is heavily influenced by their currently selected Attack
The game will also pause and the Message Panel will inform you of the current situation. It is Mode.
recommended that you take advantage of this to reorder your Agents to cope with the new
situation. Giving your Agents regularly updated orders will keep them alive longer! If an Agent has more than one potential target, then that Agent will try to select the most
appropriate target. To order your Agent to attack a specific target, move the cursor over the
hostile unit and click the RMB. To deselect the target, click the RMB on any of your Agents in
the Tactical Display.

174
p. p. 175
 The Tactical Game

• Click on the Motion Scanner in the Hands Area. The Motion Scanner Display will appear • Click to pause and center on the hostile unit.
in the top right corner of the screen.
Note: you can prevent the game from pausing by switching the Message Panel off from the
The Motion Scanner Display shows moving objects as bright white blips. The arrow in the Options Screen. Active messages are accompanied by a Tick. To switch the Message Panel
center of the display shows the current facing of the Agent holding the scanner. off for that message, click on the Tick and a Cross will appear in its place indicating that the
message is now disabled. All messages will still appear in the Message Bar but will not cause
Note: the scanner shows moving objects. It does not discriminate between hostile units and the game to pause when they appear.
X-COM.
Hostile units will be spotted if there is no terrain obstructing your Agent’s line of sight.

ENEMY SIGHTED! Note: smoke may obstruct line of sight depending on how thick it is.

When a hostile unit is spotted, ‘Alien Sighted’ Indicators will appear above the Agent’s icon SHOOTING
in the Control Panel. The number of small circles represents the number of Aliens spotted by
that Agent.
Your Agents will automatically shoot at enemy units if they see them. You must, of course,
• Click the ‘Alien Sighted’ Indicators to center the Tactical Display on the relevant Alien. make sure that there is a loaded weapon in one of the Agent’s hands. The way in which an
Agent reacts during engagements is heavily influenced by their currently selected Attack
The game will also pause and the Message Panel will inform you of the current situation. It is Mode.
recommended that you take advantage of this to reorder your Agents to cope with the new
situation. Giving your Agents regularly updated orders will keep them alive longer! If an Agent has more than one potential target, then that Agent will try to select the most
appropriate target. To order your Agent to attack a specific target, move the cursor over the
hostile unit and click the RMB. To deselect the target, click the RMB on any of your Agents in
the Tactical Display.

174
p. p. 175
 The Tactical Game

Note: to shoot in the Turn-Based Game, simply target a hostile unit and click the RMB In all cases, the Agent will continue to use Time Units in the normal way; however, the Agent
(ensure that your Agent is carrying a loaded weapon). To select a specific weapon when your will always retain enough for the reserved Shot-Type. If you try to move when you are in this
Agent is carrying two, simply click the LMB on that weapon in the Hands Area. Move the position, you will be informed that the Time Units are reserved.
cross hairs cursor over your selected target and click. Alternatively, press and hold s and
click the LMB on the target. Click each time you wish to make a shot. You can also reserve Time Units to make an Agent kneel down at the end of a move. In
combat, you may want to leave your Agent in the kneeling position to make them less visible
To shoot at terrain in both the Real-Time and Turn-Based Games, players must use the Shift in Hidden Movement.
key method (as above).
• Click to reserve enough Time Units for your Agent to Kneel.
OPPORTUNITY FIRE (TURN-BASED ONLY)
If you end your Turn leaving Agent’s with enough Time Units to fire a shot, your Agents can Opportunity Fire can be crucial to mission success. Remember, if you can leave your Agents
automatically fire during the Alien’s Turn at any hostile unit who strays into their line of sight. with enough Time Units at the end of X-COM’s turn, your Agents might even be able to take a
This is called Opportunity Fire. shot before any Aliens move, if their reactions and Time Units are high enough.

You can set your Agents to reserve Time Units for specific actions: In previous X-COM games, Agents have been unable to move during Opportunity Fire. In
X-COM: Apocalypse, Agents are able to take advantage of Opportunity Movement. Agents use
• Click . As long as this is selected, the Agent will always retain enough Time Units to Opportunity Movement in accordance with their current Attack Mode. Agents in Aggressive
perform an Aimed-Shot in the event of Opportunity Fire. Mode will be trigger-happy and only attempt to fire (they will not use Opportunity
• Click . As long as this is selected, the Agent will always retain enough Time Units to Movement). In Cautious Mode Agents will fire and then use Opportunity Movement to seek
perform a Snap-Shot in the event of Opportunity Fire. cover. Agents in Safe Mode will not fire and always use Opportunity Movement to seek cover.
• Click . As long as this is selected, the Agent will always retain enough Time Units to
perform an Auto-Shot in the event of Opportunity Fire. There may be several exchanges of fire in each Opportunity Fire confrontation.

176
p. p. 177
 The Tactical Game

Note: to shoot in the Turn-Based Game, simply target a hostile unit and click the RMB In all cases, the Agent will continue to use Time Units in the normal way; however, the Agent
(ensure that your Agent is carrying a loaded weapon). To select a specific weapon when your will always retain enough for the reserved Shot-Type. If you try to move when you are in this
Agent is carrying two, simply click the LMB on that weapon in the Hands Area. Move the position, you will be informed that the Time Units are reserved.
cross hairs cursor over your selected target and click. Alternatively, press and hold s and
click the LMB on the target. Click each time you wish to make a shot. You can also reserve Time Units to make an Agent kneel down at the end of a move. In
combat, you may want to leave your Agent in the kneeling position to make them less visible
To shoot at terrain in both the Real-Time and Turn-Based Games, players must use the Shift in Hidden Movement.
key method (as above).
• Click to reserve enough Time Units for your Agent to Kneel.
OPPORTUNITY FIRE (TURN-BASED ONLY)
If you end your Turn leaving Agent’s with enough Time Units to fire a shot, your Agents can Opportunity Fire can be crucial to mission success. Remember, if you can leave your Agents
automatically fire during the Alien’s Turn at any hostile unit who strays into their line of sight. with enough Time Units at the end of X-COM’s turn, your Agents might even be able to take a
This is called Opportunity Fire. shot before any Aliens move, if their reactions and Time Units are high enough.

You can set your Agents to reserve Time Units for specific actions: In previous X-COM games, Agents have been unable to move during Opportunity Fire. In
X-COM: Apocalypse, Agents are able to take advantage of Opportunity Movement. Agents use
• Click . As long as this is selected, the Agent will always retain enough Time Units to Opportunity Movement in accordance with their current Attack Mode. Agents in Aggressive
perform an Aimed-Shot in the event of Opportunity Fire. Mode will be trigger-happy and only attempt to fire (they will not use Opportunity
• Click . As long as this is selected, the Agent will always retain enough Time Units to Movement). In Cautious Mode Agents will fire and then use Opportunity Movement to seek
perform a Snap-Shot in the event of Opportunity Fire. cover. Agents in Safe Mode will not fire and always use Opportunity Movement to seek cover.
• Click . As long as this is selected, the Agent will always retain enough Time Units to
perform an Auto-Shot in the event of Opportunity Fire. There may be several exchanges of fire in each Opportunity Fire confrontation.

176
p. p. 177
 The Tactical Game

SHOOTING FROM THE OVERHEAD MAP 2. Risk to other Agents. Explosive ammunition will not be fired at a target if the blast radius
will affect another Agent (this includes the Agent making the shot). Also, Agents will not
To shoot from the Overhead Map: fire if other Agents are too close to the path of the shot, although an Agent in Aggressive
Mode will take more risks than an Agent in Cautious Mode.
• Click on the target of your choice, while holding down s. Each Agent will fire a shot in
that direction. MAXIMIZING ACCURACY
The bar below each hand will show the accuracy of any weapons held in that hand. The bars
• Click repeatedly to take more than one shot. will become filled towards the center of the screen to indicate an Agent’s accuracy with the
currently held weapon. The closer the filled bar is to the center of the screen, the better an
Note: some weapons have guided munitions which will adjust their course as they move Agent’s accuracy. The following things affect accuracy:
towards the target.
• An Aimed-Shot will increase the accuracy, whereas automatic fire will decrease the
REACTIONS accuracy.
There are some occasions when an Agent does not fire at an enemy even though there is a • Kneeling Agents will be more accurate.
clear line of sight. There can be several reasons for this: • A Wounded Agent will be less accurate.
• Using a two-handed weapon (such as a sniper rifle) with an object in the other hand will
1. There is a delay between spotting an enemy and being able to shoot at it. This delay reduce accuracy.
depends on the reaction rating of the firing Agent, the firing rate of the weapon and the • Walking Agents will have reduced accuracy.
Agent’s selected Shot-Type. An Agent with good reactions and a quick firing machine gun
using Auto-fire will shoot quicker at a newly spotted Alien than an Agent with poor Principles that are true to real-life combat also affect accuracy:
reactions and a sniper rifle. This delay could be long enough for the hostile unit to take
cover again! • The larger the target, the easier it is to hit.
• A stationary target is easier to hit than a moving target.
Note: once an Agent has fired, there will be no delays for any successive shots. • The closer the target, the easier it is to hit.

178
p. p. 179
 The Tactical Game

SHOOTING FROM THE OVERHEAD MAP 2. Risk to other Agents. Explosive ammunition will not be fired at a target if the blast radius
will affect another Agent (this includes the Agent making the shot). Also, Agents will not
To shoot from the Overhead Map: fire if other Agents are too close to the path of the shot, although an Agent in Aggressive
Mode will take more risks than an Agent in Cautious Mode.
• Click on the target of your choice, while holding down s. Each Agent will fire a shot in
that direction. MAXIMIZING ACCURACY
The bar below each hand will show the accuracy of any weapons held in that hand. The bars
• Click repeatedly to take more than one shot. will become filled towards the center of the screen to indicate an Agent’s accuracy with the
currently held weapon. The closer the filled bar is to the center of the screen, the better an
Note: some weapons have guided munitions which will adjust their course as they move Agent’s accuracy. The following things affect accuracy:
towards the target.
• An Aimed-Shot will increase the accuracy, whereas automatic fire will decrease the
REACTIONS accuracy.
There are some occasions when an Agent does not fire at an enemy even though there is a • Kneeling Agents will be more accurate.
clear line of sight. There can be several reasons for this: • A Wounded Agent will be less accurate.
• Using a two-handed weapon (such as a sniper rifle) with an object in the other hand will
1. There is a delay between spotting an enemy and being able to shoot at it. This delay reduce accuracy.
depends on the reaction rating of the firing Agent, the firing rate of the weapon and the • Walking Agents will have reduced accuracy.
Agent’s selected Shot-Type. An Agent with good reactions and a quick firing machine gun
using Auto-fire will shoot quicker at a newly spotted Alien than an Agent with poor Principles that are true to real-life combat also affect accuracy:
reactions and a sniper rifle. This delay could be long enough for the hostile unit to take
cover again! • The larger the target, the easier it is to hit.
• A stationary target is easier to hit than a moving target.
Note: once an Agent has fired, there will be no delays for any successive shots. • The closer the target, the easier it is to hit.

178
p. p. 179
 The Tactical Game

Note: proximity grenades will have an extra Slider Bar for distance setting. Sliding the bar
USING GRENADES left or right will increase or decrease the grenade’s detection range.

Each hand is accompanied by two icons, (throw) and (drop).

• Click to take you to the Equip Agent Screen.
• Click and Drag a grenade into an empty ‘hand.’ • Click if you wish to drop the grenade.

• Click OK again to return you to the Tactical Screen. If you drop a grenade, ensure that you have allowed yourself enough Time Units to move the
• Click the grenade to open the Prime Grenade ‘window.’ Agent away from the blast area.

• Click if you wish to throw the grenade.

• Click a target in the Isometric Map View. The grenade will now be thrown in that
direction.
Slider Bar
Note: if you are unable to throw the grenade for any reason, the cursor will change to signify
Cancel Priming that an area cannot be targeted.
The Grenade
Tip: you can pause the game while you prime and throw a grenade. As soon as you restart
time, the grenade will be thrown.

• ‘Click and drag’ the Slider Bar, in the Prime Grenade ‘window’, to the left or right to If an Agent already has a grenade in their hand and you need them to throw it quickly, simply
decrease or increase the grenade’s delay time. select the grenade with the RMB in the Hands Area. Click a target in the Isometric Map View.
The grenade will now be thrown at its intended target and explode on contact with the floor.
• Click Tick to accept the grenade settings, or click the Cross icon to cancel the whole
operation.

180
p. p.181
 The Tactical Game

Note: proximity grenades will have an extra Slider Bar for distance setting. Sliding the bar
USING GRENADES left or right will increase or decrease the grenade’s detection range.

Each hand is accompanied by two icons, (throw) and (drop).

• Click to take you to the Equip Agent Screen.
• Click and Drag a grenade into an empty ‘hand.’ • Click if you wish to drop the grenade.

• Click OK again to return you to the Tactical Screen. If you drop a grenade, ensure that you have allowed yourself enough Time Units to move the
• Click the grenade to open the Prime Grenade ‘window.’ Agent away from the blast area.

• Click if you wish to throw the grenade.

• Click a target in the Isometric Map View. The grenade will now be thrown in that
direction.
Slider Bar
Note: if you are unable to throw the grenade for any reason, the cursor will change to signify
Cancel Priming that an area cannot be targeted.
The Grenade
Tip: you can pause the game while you prime and throw a grenade. As soon as you restart
time, the grenade will be thrown.

• ‘Click and drag’ the Slider Bar, in the Prime Grenade ‘window’, to the left or right to If an Agent already has a grenade in their hand and you need them to throw it quickly, simply
decrease or increase the grenade’s delay time. select the grenade with the RMB in the Hands Area. Click a target in the Isometric Map View.
The grenade will now be thrown at its intended target and explode on contact with the floor.
• Click Tick to accept the grenade settings, or click the Cross icon to cancel the whole
operation.

180
p. p.181
 The Tactical Game

Don’t be surprised if your Agents are not always on target, as this is dependent on their • Psionic Attack—This represents the ability to carry out successful attacks against a
accuracy rating. Check that this rating is high in their stats when you are recruiting! particular target.
• Psionic Defense—This represents the ability of the Agent to fend off any Psionic attacks.
Grenades are not the only object you can throw; other objects can be thrown in the same way.
The distance an object can be thrown depends on the weight of the object and strength of the Note: if Agents are taken over by an Alien Mind Control Device, you will find that they
thrower. disappear from your list of available units. If you manage to succeed in your mission or you
kill all of the Aliens, that Agent will return to normal. During the time Agents are under Alien
Note: once an object has been thrown, the throwing icons are deactivated for a short period control, they will do anything the Alien wills them to do. The Agent can only regain control
of time. when the Alien focuses its attention elsewhere or if the Alien is killed.

USING PSIONIC To use the Mind Bender in a Tactical Combat Mission, simply ensure that it is in one of your
WEAPONS Agent’s hands. Click on it in the Hands Area of the Control Panel.

In addition to standard guns and grenades, your Agents also have the ability to use Psionic
Weapons. These weapons allow you to take over Aliens, panic enemies, probe minds for
information or simply stun your Agents’ target.
Psi-Stats
Before you can perform any of these Psionic attacks you will need to purchase a device called
the Mind Bender. Only those Agents with good Psionic powers should attempt to use the Panic Unit Stun Unit
Mind Bender. Agents Psionic abilities are measured as follows:
Control Body Probe Unit

• Psionic Energy—This represents the mental stamina of the Agent. As Psionic powers are
used, the energy level will fall. If the Agent rests, energy will be recovered gradually. If
Psionic Energy falls to zero, then no further Psionic attacks are possible and any attacks
currently in progress will stop.

182
p. p. 183
 The Tactical Game

Don’t be surprised if your Agents are not always on target, as this is dependent on their • Psionic Attack—This represents the ability to carry out successful attacks against a
accuracy rating. Check that this rating is high in their stats when you are recruiting! particular target.
• Psionic Defense—This represents the ability of the Agent to fend off any Psionic attacks.
Grenades are not the only object you can throw; other objects can be thrown in the same way.
The distance an object can be thrown depends on the weight of the object and strength of the Note: if Agents are taken over by an Alien Mind Control Device, you will find that they
thrower. disappear from your list of available units. If you manage to succeed in your mission or you
kill all of the Aliens, that Agent will return to normal. During the time Agents are under Alien
Note: once an object has been thrown, the throwing icons are deactivated for a short period control, they will do anything the Alien wills them to do. The Agent can only regain control
of time. when the Alien focuses its attention elsewhere or if the Alien is killed.

USING PSIONIC To use the Mind Bender in a Tactical Combat Mission, simply ensure that it is in one of your
WEAPONS Agent’s hands. Click on it in the Hands Area of the Control Panel.

In addition to standard guns and grenades, your Agents also have the ability to use Psionic
Weapons. These weapons allow you to take over Aliens, panic enemies, probe minds for
information or simply stun your Agents’ target.
Psi-Stats
Before you can perform any of these Psionic attacks you will need to purchase a device called
the Mind Bender. Only those Agents with good Psionic powers should attempt to use the Panic Unit Stun Unit
Mind Bender. Agents Psionic abilities are measured as follows:
Control Body Probe Unit

• Psionic Energy—This represents the mental stamina of the Agent. As Psionic powers are
used, the energy level will fall. If the Agent rests, energy will be recovered gradually. If
Psionic Energy falls to zero, then no further Psionic attacks are possible and any attacks
currently in progress will stop.

182
p. p. 183
 The Tactical Game

The Mind Bender window should open in the center of the Control Panel. There will be four
Psi-Attack Buttons for you to use. They are: ENCUMBRANCE

• Control Body—After using this attack successfully, you will be able to control the target as
though it were one of your Agents (you can make Aliens shoot Aliens!). Equipping your Agents with a lot of heavy objects will reduce their speed because the Agent is
• Panic Unit—This makes the target panic, rendering it useless for a short period of time. encumbered. An Agent with a high strength rating is able to carry more objects than a weaker
• Stun Unit—This stuns the unit so that you can take live Aliens back to your containment Agent without being affected by encumbrance.
facility for Biochemistry research. You can only bring back Aliens (alive or dead) if you
have a Bio-Transport Module.
• Probe Unit—Using the ‘Mind Probe’ allows you to find out more information about the EXHAUSTION
selected target.
If Agents are running they will use up their stamina until they become exhausted. An
• Click one of the four Psi-Attack Buttons.
exhausted Agent will not be able to run, but can still walk and perform other actions. The
• Click on a target Alien in the Tactical Area. The attack will be launched against that Alien. Agent can rest to regain stamina (i.e. remain stationary). If an Agent is walking, stamina will
The effectiveness of the attack will depend on the target’s statistics—if it has strong neither be used nor recovered.
Psi-Defense, then the attack may not succeed.

Any attack attempted will drain the attacker’s Psionic energy depending on the power of the MORALE
attack. If the attack is successful, there will also be a continuous drain as the attack takes
effect.
At the start of each mission, each Agent’s morale starts at 100%. This will decrease as an
Agent is wounded or if fellow Agents are killed. Morale will recover if an Agent successfully
kills hostile units. The decline in morale is lessened by an Agent’s bravery rating.

184
p. p. 185
 The Tactical Game

The Mind Bender window should open in the center of the Control Panel. There will be four
Psi-Attack Buttons for you to use. They are: ENCUMBRANCE

• Control Body—After using this attack successfully, you will be able to control the target as
though it were one of your Agents (you can make Aliens shoot Aliens!). Equipping your Agents with a lot of heavy objects will reduce their speed because the Agent is
• Panic Unit—This makes the target panic, rendering it useless for a short period of time. encumbered. An Agent with a high strength rating is able to carry more objects than a weaker
• Stun Unit—This stuns the unit so that you can take live Aliens back to your containment Agent without being affected by encumbrance.
facility for Biochemistry research. You can only bring back Aliens (alive or dead) if you
have a Bio-Transport Module.
• Probe Unit—Using the ‘Mind Probe’ allows you to find out more information about the EXHAUSTION
selected target.
If Agents are running they will use up their stamina until they become exhausted. An
• Click one of the four Psi-Attack Buttons.
exhausted Agent will not be able to run, but can still walk and perform other actions. The
• Click on a target Alien in the Tactical Area. The attack will be launched against that Alien. Agent can rest to regain stamina (i.e. remain stationary). If an Agent is walking, stamina will
The effectiveness of the attack will depend on the target’s statistics—if it has strong neither be used nor recovered.
Psi-Defense, then the attack may not succeed.

Any attack attempted will drain the attacker’s Psionic energy depending on the power of the MORALE
attack. If the attack is successful, there will also be a continuous drain as the attack takes
effect.
At the start of each mission, each Agent’s morale starts at 100%. This will decrease as an
Agent is wounded or if fellow Agents are killed. Morale will recover if an Agent successfully
kills hostile units. The decline in morale is lessened by an Agent’s bravery rating.

184
p. p. 185
 The Tactical Game

EFFECTS OF RANK
High ranking officers help maintain the morale of your Agents. The amount an Agent’s morale WOUNDING
is reduced depends on:

• The rank of the most senior Agent in the Agent’s squad. If an Agent takes a direct hit, they may well receive critical wounds. These afflict parts of the
• The rank of the most senior Agent in the Tactical Area. body as follows:

The higher the rank, the less morale is reduced. Head, Left/Right Arm—Each critical wound reduces the Agent’s weapon accuracy.

Note: if an officer is killed during a mission, it will have a worse effect on morale than if a Torso—Each critical wound reduces the Agent’s rate of energy recovery.
Rookie had been killed.
Each critical wound also reduces an Agent’s health gradually, so that it is possible for an
If things are going badly, Agents may Panic or be Wounded. Agent to die from a hit received much earlier in the mission. If an Agent does receive a critical
wound, there are three things you can do to save that person:
PANIC
When morale falls, the likelihood of panic increases. The braver an Agent is, the less likely • Use a Medi-kit. The Medi-kit can heal critical wounds.
they are to panic. When an Agent panics, one of three things can happen: • Leave the Tactical Area. Arrows represent the areas and direction by which an Agent can
leave the Tactical Area. The Agent must return to the base medical facility to heal the
• The Agent freezes and can do nothing. wound.
• Kill all hostile units quickly before the Agent dies. If all hostile units are killed, then the
• The Agent runs away, searching for a hiding place. mission will be completed and the Agents will all leave the Tactical Area automatically. In
• The Agent goes berserk and starts firing at random. this situation, the Agents must return to Base to receive treatment for their wounds.

The lower an Agent’s morale, the longer they will Panic.

186
p. p. 187
 The Tactical Game

EFFECTS OF RANK
High ranking officers help maintain the morale of your Agents. The amount an Agent’s morale WOUNDING
is reduced depends on:

• The rank of the most senior Agent in the Agent’s squad. If an Agent takes a direct hit, they may well receive critical wounds. These afflict parts of the
• The rank of the most senior Agent in the Tactical Area. body as follows:

The higher the rank, the less morale is reduced. Head, Left/Right Arm—Each critical wound reduces the Agent’s weapon accuracy.

Note: if an officer is killed during a mission, it will have a worse effect on morale than if a Torso—Each critical wound reduces the Agent’s rate of energy recovery.
Rookie had been killed.
Each critical wound also reduces an Agent’s health gradually, so that it is possible for an
If things are going badly, Agents may Panic or be Wounded. Agent to die from a hit received much earlier in the mission. If an Agent does receive a critical
wound, there are three things you can do to save that person:
PANIC
When morale falls, the likelihood of panic increases. The braver an Agent is, the less likely • Use a Medi-kit. The Medi-kit can heal critical wounds.
they are to panic. When an Agent panics, one of three things can happen: • Leave the Tactical Area. Arrows represent the areas and direction by which an Agent can
leave the Tactical Area. The Agent must return to the base medical facility to heal the
• The Agent freezes and can do nothing. wound.
• Kill all hostile units quickly before the Agent dies. If all hostile units are killed, then the
• The Agent runs away, searching for a hiding place. mission will be completed and the Agents will all leave the Tactical Area automatically. In
• The Agent goes berserk and starts firing at random. this situation, the Agents must return to Base to receive treatment for their wounds.

The lower an Agent’s morale, the longer they will Panic.

186
p. p. 187
 The Tactical Game

USING THE MEDI-KIT STUNNING

You can use the Medi-kit to heal critical wounds. In order to use the Medi-kit, ensure that it is Agents or Aliens can be stunned if hit by a Stunning Weapon, caught in an explosion blast
placed in one of your Agent’s hands. radius, or if suffering from smoke or dust/debris inhalation following an explosion.

Medi-Kit Display COMPLETING TACTICAL

COMBAT MISSIONS

The Tactical Combat Mission will end under any of the following circumstances:

Medi-Kit
• All hostile units are unconscious or dead—you win.

In this case all equipment and Alien corpses left in the combat zone are recovered by X-COM.
(Live chrysalis and Alien eggs are recovered automatically if everything else is killed or
stunned. You do not have to kill them to complete a Tactical Combat Mission.) However,
equipment can only be taken back to base if there is a vehicle with a Cargo Module at the
building (you must make sure this is the case before a Tactical Combat is initiated). Live
• Click on the Medi-kit in the Hands Area. The Medi-kit Display will appear in the top corner Aliens and corpses can only be taken back to Base if there is a vehicle with a Bio-Transport
of the screen. Wounded parts of the body will appear highlighted in red. Module at the building.

• Click on the affected body part in the display and it will change color to green to indicate • All X-COM Agents are unconscious or dead—you lose.
that healing has been started (in Real-Time Mode).
Any equipment left in the Tactical Area is lost. Any equipment carried by Agents who have left
You must now wait while the Agent’s wound heals, which will take some time. If you move the Tactical Area is retained.
the Agent, the healing process is cancelled and you will have to use the Medi-kit again.
• All hostile units panic and flee the combat area—you win.

188
p. p. 189
 The Tactical Game

USING THE MEDI-KIT STUNNING

You can use the Medi-kit to heal critical wounds. In order to use the Medi-kit, ensure that it is Agents or Aliens can be stunned if hit by a Stunning Weapon, caught in an explosion blast
placed in one of your Agent’s hands. radius, or if suffering from smoke or dust/debris inhalation following an explosion.

Medi-Kit Display COMPLETING TACTICAL

COMBAT MISSIONS

The Tactical Combat Mission will end under any of the following circumstances:

Medi-Kit
• All hostile units are unconscious or dead—you win.

In this case all equipment and Alien corpses left in the combat zone are recovered by X-COM.
(Live chrysalis and Alien eggs are recovered automatically if everything else is killed or
stunned. You do not have to kill them to complete a Tactical Combat Mission.) However,
equipment can only be taken back to base if there is a vehicle with a Cargo Module at the
building (you must make sure this is the case before a Tactical Combat is initiated). Live
• Click on the Medi-kit in the Hands Area. The Medi-kit Display will appear in the top corner Aliens and corpses can only be taken back to Base if there is a vehicle with a Bio-Transport
of the screen. Wounded parts of the body will appear highlighted in red. Module at the building.

• Click on the affected body part in the display and it will change color to green to indicate • All X-COM Agents are unconscious or dead—you lose.
that healing has been started (in Real-Time Mode).
Any equipment left in the Tactical Area is lost. Any equipment carried by Agents who have left
You must now wait while the Agent’s wound heals, which will take some time. If you move the Tactical Area is retained.
the Agent, the healing process is cancelled and you will have to use the Medi-kit again.
• All hostile units panic and flee the combat area—you win.

188
p. p. 189
 The Tactical Game

In this case, all equipment and Alien corpses left in the Tactical Area are recovered by Leadership Bonus—A bonus attributed for leadership performance. This bonus will be high if
X-COM. you have killed many Aliens and received few casualties. The bonus will be higher still if no
Agents are killed during a mission.
• All Agents leave the Tactical Area using Exit Points. Live Aliens Captured—A score for Live Aliens you have captured during a Tactical Combat
Mission.
In this case, unconscious Agents and Agents under mind control are considered killed. Any Equipment Captured—Displays a score representing the value of artifacts captured from the
equipment left in the combat zone is lost. Any equipment carried by Agents who have left the enemy.
Tactical Area is retained. Equipment Lost—Any equipment/objects not carried by X-COM will only be returned if
X-COM has a Cargo Module fitted to one of their vehicles; otherwise it will be lost. This
• You can press q to terminate a mission manually. In this case Agents left in the combat number reflects a penalty for all objects captured by the enemy or destroyed in combat.
zone may be killed depending on the situation. Agents surrounded by Aliens are unlikely to Total—The Total Score for the mission, representing your overall performance.
survive. Any Agent close to an Exit Point may survive. Equipment and Aliens will not be
recovered from the Tactical Area if the mission is terminated in this way. PROMOTIONS
At the end of each mission, subject to their mission performance, Agents may be promoted.

DEBRIEFING The rank to which the Agent is promoted is dependent on the following:

Rookie—Each new recruit begins at this level.

The debriefing screen is displayed at the end of the Tactical Combat Mission, giving you a
breakdown of your performance as follows: Squaddie—In order to be promoted to a Squaddie, a Rookie must have some combat
experience.
Combat Rating—Total score for enemy units killed. If you kill civilians, then your score will
be reduced for each one killed. Squad Leader—There is one Squad Leader per five Agents. If a position is vacant, the best
Casualty Penalty—A penalty score based on the number of X-COM Agents killed in action. Squaddie is promoted.

190
p. p. 191
 The Tactical Game

In this case, all equipment and Alien corpses left in the Tactical Area are recovered by Leadership Bonus—A bonus attributed for leadership performance. This bonus will be high if
X-COM. you have killed many Aliens and received few casualties. The bonus will be higher still if no
Agents are killed during a mission.
• All Agents leave the Tactical Area using Exit Points. Live Aliens Captured—A score for Live Aliens you have captured during a Tactical Combat
Mission.
In this case, unconscious Agents and Agents under mind control are considered killed. Any Equipment Captured—Displays a score representing the value of artifacts captured from the
equipment left in the combat zone is lost. Any equipment carried by Agents who have left the enemy.
Tactical Area is retained. Equipment Lost—Any equipment/objects not carried by X-COM will only be returned if
X-COM has a Cargo Module fitted to one of their vehicles; otherwise it will be lost. This
• You can press q to terminate a mission manually. In this case Agents left in the combat number reflects a penalty for all objects captured by the enemy or destroyed in combat.
zone may be killed depending on the situation. Agents surrounded by Aliens are unlikely to Total—The Total Score for the mission, representing your overall performance.
survive. Any Agent close to an Exit Point may survive. Equipment and Aliens will not be
recovered from the Tactical Area if the mission is terminated in this way. PROMOTIONS
At the end of each mission, subject to their mission performance, Agents may be promoted.

DEBRIEFING The rank to which the Agent is promoted is dependent on the following:

Rookie—Each new recruit begins at this level.

The debriefing screen is displayed at the end of the Tactical Combat Mission, giving you a
breakdown of your performance as follows: Squaddie—In order to be promoted to a Squaddie, a Rookie must have some combat
experience.
Combat Rating—Total score for enemy units killed. If you kill civilians, then your score will
be reduced for each one killed. Squad Leader—There is one Squad Leader per five Agents. If a position is vacant, the best
Casualty Penalty—A penalty score based on the number of X-COM Agents killed in action. Squaddie is promoted.

190
p. p. 191
 The Tactical Game

INFORMATION SCREENS

Sergeant—There is one Sergeant per four Squad Leaders. If a position is vacant, the best There are various Information Screens that will appear during your campaign. These include:
Squad Leader is promoted.
• Weekly Funding Assessment
Captain—There is one Captain per three Sergeants. If a position is vacant, the best Sergeant • Diplomatic Rift
is promoted. • Alien Takeover

Colonel—There is one Colonel per two Captains. If a position is vacant, the best Captain is
WEEKLY FUNDING
promoted. ASSESSMENT

Commander—This is the leader of X-COM forces. If the position is vacant, the best Colonel is
promoted. At the end of each week, X-COM will receive a report from the Senate informing you of your
progress. This will comprise the following:
Generally, the higher the rank, the better the Agent.
• A written statement of your progress.
MISSION EXPERIENCE • Your present funding.
When Agents return from a mission, their abilities may be increased. For a skill to benefit • A funding adjustment, in light of your recent performance. Funding can be adjusted
from experience, it must be used during combat as much as possible. For example, if an upwards as well as downwards.
Agent uses a Laser Rifle many times, then accuracy is likely to improve. Reactions, accuracy,
stamina, health, speed and bravery all benefit from mission experience. • Click OK to close this screen.

• Click OK to return to the Cityscape Screen.

DIPLOMATIC RIFT SCREEN
Note: any artifacts acquired during a Tactical Combat Mission will be available for research
when the craft and Agents arrive back at your base.
In Mega-Primus, the X-COM Commander should be wary of city diplomacy. Your actions can
both please and upset the other organizations in the city. Be aware of the ways in which you
can upset other organizations:

192
p. p. 193
 The Tactical Game

INFORMATION SCREENS

Sergeant—There is one Sergeant per four Squad Leaders. If a position is vacant, the best There are various Information Screens that will appear during your campaign. These include:
Squad Leader is promoted.
• Weekly Funding Assessment
Captain—There is one Captain per three Sergeants. If a position is vacant, the best Sergeant • Diplomatic Rift
is promoted. • Alien Takeover

Colonel—There is one Colonel per two Captains. If a position is vacant, the best Captain is
WEEKLY FUNDING
promoted. ASSESSMENT

Commander—This is the leader of X-COM forces. If the position is vacant, the best Colonel is
promoted. At the end of each week, X-COM will receive a report from the Senate informing you of your
progress. This will comprise the following:
Generally, the higher the rank, the better the Agent.
• A written statement of your progress.
MISSION EXPERIENCE • Your present funding.
When Agents return from a mission, their abilities may be increased. For a skill to benefit • A funding adjustment, in light of your recent performance. Funding can be adjusted
from experience, it must be used during combat as much as possible. For example, if an upwards as well as downwards.
Agent uses a Laser Rifle many times, then accuracy is likely to improve. Reactions, accuracy,
stamina, health, speed and bravery all benefit from mission experience. • Click OK to close this screen.

• Click OK to return to the Cityscape Screen.

DIPLOMATIC RIFT SCREEN
Note: any artifacts acquired during a Tactical Combat Mission will be available for research
when the craft and Agents arrive back at your base.
In Mega-Primus, the X-COM Commander should be wary of city diplomacy. Your actions can
both please and upset the other organizations in the city. Be aware of the ways in which you
can upset other organizations:

192
p. p. 193
 • If X-COM damages buildings belonging to other organizations, either with vehicles or with Note: if an organization is hostile to X-COM, you will have to fight the security forces of a
Agents during a Tactical Mission, then that organization will become less friendly to building you investigate as well as any Aliens present.
X-COM.
• If you investigate a building with no prior Alert, there will be a small diplomatic penalty
ALIEN TAKEOVER
(organizations are understandably alarmed at a squad of heavily armed Agents walking SCREEN
around their buildings).
• Raiding an organization will make that organization hostile to X-COM. It is also possible
that you can upset the allies of that organization. Watch out! As Alien infiltration into the city escalates, you will find that organizations fall under the
control of the Aliens. This screen will warn you when this happens and to which organization.
The initial state of diplomatic relations in Mega-Primus can determine which organizations are
more likely to become hostile. For a guide to the relationships between organizations at the Once a corporation is under Alien control, it will attempt to assist the Aliens in whatever way
start of the game, you should examine the descriptions in the UFOpaedia. it can. You may decide to destroy some of its buildings to deplete its resources and reduce
the possibility of Aliens spreading into nearby buildings.
Whenever an organization becomes unfriendly to X-COM (but not actually hostile), it may
cause a Diplomatic Rift. Organizations who feel they have been unfairly treated will ask for
money to keep relationships amicable.

The Diplomatic Rift screen allows you the opportunity to pay the organization or not. If you
refuse to pay the sum, the organization may become hostile towards X-COM and you may be
attacked by that organization in the future. There are also other penalties for hostility:

• You will not be able to buy goods from a hostile organization.

• You will receive no further funding from the Senate if it becomes hostile.
• You cannot recruit Alien hybrids if the Mutant Alliance is hostile.
• You cannot recruit Androids if the Sentient Engine Liberation Front is hostile.

194
p. p.195
 • If X-COM damages buildings belonging to other organizations, either with vehicles or with Note: if an organization is hostile to X-COM, you will have to fight the security forces of a
Agents during a Tactical Mission, then that organization will become less friendly to building you investigate as well as any Aliens present.
X-COM.
• If you investigate a building with no prior Alert, there will be a small diplomatic penalty
ALIEN TAKEOVER
(organizations are understandably alarmed at a squad of heavily armed Agents walking SCREEN
around their buildings).
• Raiding an organization will make that organization hostile to X-COM. It is also possible
that you can upset the allies of that organization. Watch out! As Alien infiltration into the city escalates, you will find that organizations fall under the
control of the Aliens. This screen will warn you when this happens and to which organization.
The initial state of diplomatic relations in Mega-Primus can determine which organizations are
more likely to become hostile. For a guide to the relationships between organizations at the Once a corporation is under Alien control, it will attempt to assist the Aliens in whatever way
start of the game, you should examine the descriptions in the UFOpaedia. it can. You may decide to destroy some of its buildings to deplete its resources and reduce
the possibility of Aliens spreading into nearby buildings.
Whenever an organization becomes unfriendly to X-COM (but not actually hostile), it may
cause a Diplomatic Rift. Organizations who feel they have been unfairly treated will ask for
money to keep relationships amicable.

The Diplomatic Rift screen allows you the opportunity to pay the organization or not. If you
refuse to pay the sum, the organization may become hostile towards X-COM and you may be
attacked by that organization in the future. There are also other penalties for hostility:

• You will not be able to buy goods from a hostile organization.

• You will receive no further funding from the Senate if it becomes hostile.
• You cannot recruit Alien hybrids if the Mutant Alliance is hostile.
• You cannot recruit Androids if the Sentient Engine Liberation Front is hostile.

194
p. p.195
 APPENDIX A - KEYBOARD
AND MOUSE CONTROLS

CITYSCAPE DISPLAY Fire Weapon LMB

GENERAL MESSAGE PANEL
Pause on/off z Continue q
Time Controls 0, 1, 2, 3, 4, 5 Center On e
Switch Map View t Toggle Message on/off z
Options O
UFOpaedia 1 TACTICAL GAME
Scroll W, A, S, Z GENERAL
Quit Game q Switch Map View t
VEHICLE ORDERS Up Level Arrow U
Go To Building s + LMB Down Level Arrow Y
Attack Vehicle a + LMB Toggle Map Level Display V
Switch Camera Mode C
SETTING DESTINATIONS
Set Safe Mode 9
Cancel q
Set Cautious Mode 0
Add Waypoint c + LMB
Set Aggressive Mode -
MANUAL CONTROL (VEHICLES) Crawling 2
Activate Manual Control M Walking 3
Cancel q Running 4
Increase Speed U Don’t Fire 5
Decrease Speed Y Aimed-Shot 6
Increase Altitude (flying vehicles) h Snap-Shot 7
Decrease Altitude (flying vehicles) j Auto-Shot 8
U-Turn (road vehicles) h Kneel B
Overtake (road vehicles) j Message History M
Set Direction RMB Center on Message h

196
p. 197
p.
 APPENDIX A - KEYBOARD
AND MOUSE CONTROLS

CITYSCAPE DISPLAY Fire Weapon LMB

GENERAL MESSAGE PANEL
Pause on/off z Continue q
Time Controls 0, 1, 2, 3, 4, 5 Center On e
Switch Map View t Toggle Message on/off z
Options O
UFOpaedia 1 TACTICAL GAME
Scroll W, A, S, Z GENERAL
Quit Game q Switch Map View t
VEHICLE ORDERS Up Level Arrow U
Go To Building s + LMB Down Level Arrow Y
Attack Vehicle a + LMB Toggle Map Level Display V
Switch Camera Mode C
SETTING DESTINATIONS
Set Safe Mode 9
Cancel q
Set Cautious Mode 0
Add Waypoint c + LMB
Set Aggressive Mode -
MANUAL CONTROL (VEHICLES) Crawling 2
Activate Manual Control M Walking 3
Cancel q Running 4
Increase Speed U Don’t Fire 5
Decrease Speed Y Aimed-Shot 6
Increase Altitude (flying vehicles) h Snap-Shot 7
Decrease Altitude (flying vehicles) j Auto-Shot 8
U-Turn (road vehicles) h Kneel B
Overtake (road vehicles) j Message History M
Set Direction RMB Center on Message h

196
p. 197
p.
 CUSTOMER SUPPORT

Select Squad 1, 2, 3, 4, 5, 6 If you have any questions about X-COM: Apocalypse or any of our other products, please
Assign Selected contact MicroProse Customer Support at:
Units to Squad c + 1, 2, 3, 4, 5, 6
Abort mission q ■ MicroProse
2490 Mariner Square Loop
‘HAND’ AREA
Alameda, CA 94501
Equip Unit Screen e
ATTN: Customer Support
Throw (left hand) [
Throw (right hand) ]
■ (510)522-1164
Drop (left hand) '
9:00 AM to 5:00 PM Pacific Time
Drop (right hand) \
Monday through Friday
PRIME GRENADE WINDOW
Accept Settings Y ■ Fax
Cancel N (510)522-9357
REAL-TIME ONLY
Pause on/off z ■ World Wide Web
www.microprose.com
TURN-BASED ONLY
End Turn E ■ FTP
LOADING AND SAVING ftp.microprose.com
Saving A Game S
Loading A Game L

GAME SCREENS
OK/Cancel e/q
Scroll Bars W, A, S, Z

198
p. 199
p.
 CREDITS

Mythos Games Ltd.

Game Design Julian Gollop
Lead Programmer Nick Gollop
Programming Dave Bostock
Thaddaeus Frogley
Andy Greene
Julian Gollop
Map Editor Simon Watson
Ian Tory
Product Manager Helmut Watson
Lead Map Designers Mark Simmons
Steve Moorhouse
Jason Grace
Map Designers Phil Davies
Dave Moore
Karli Watson
Dave Kemsley
Kevin Tucker
Helmut Watson
Marc Walton
Dave Watson
MicroProse
Art Coordinator Guy Jeffries
Artists Erol Kentli
Greg Shill
Pete Austin
Kevin Wicks
Guy Jeffries
Martin Severn
Matthew Knott

202
p. 203
p.
 Additional Art Drew Northcott Mapping Marc Curtis
Paul Truss Guy Jeffries
Gavin Cooper
Lead Quality Assurance Darren Kirby
Martin Smillie
Eddie Garnier Quality Assurance Don Witcombe
Jonathan Rowe Paul Coppins
Paul Varney Phil McDonnell
Amanda Roberts Dan Luton
Terry Greer Stuart Poole
Nick Cook Jamie Toghill
Jane Barnett Martin Crompton
Pietro Lantro Neil McEwan
Julian Madle Anton Lorton
Andrew Morriss Matt Bridges
Chris Briggs
3D Scanning Steve Edwards
Alameda, CA
Alien World and Models Designed
Compatibility Group Hoi Nguyen
by Tim White
William Hom
Music and Sound Designed and Produced by John Broomhall Khoi Nguyen
Lead Composer Richard Wells U.S. Quality Assurance Lead Stewart Stanyard
Additional Music Dave Punshon
U.S. Quality Assurance Anthony Constantino XXVII
John Broomhall
Chris Evans
Sound Design Steve Cowell for Steve Head
PC Music Ltd. Brian King
Audio Post Production Matt Vowles for Stewart Holbrook
Sprockets and Bytes Jeffrey Wilkinson

Vocal Artists Valentina Britten Manual Author/Editor Justin Manning

Patrice Stauder Managing Editor Alkis Alkiviades
Julian Holman
Manual Artwork Jessica Crawley
Drew Northcott
Eddie Garnier Senior Product Manager Adrian Turner
Additional Audio Engineering Martin Severn U.S. Product Manager Tom Nichols
Darren Lambourne
Producer James Hawkins
A/V Systems incorporate HMI's Sound Operating System and RAD Stuart Whyte
Software's Smacker Video Technology Steve Goss
Grant Dean

204
p. 205
p.
 Additional Art Drew Northcott Mapping Marc Curtis
Paul Truss Guy Jeffries
Gavin Cooper
Lead Quality Assurance Darren Kirby
Martin Smillie
Eddie Garnier Quality Assurance Don Witcombe
Jonathan Rowe Paul Coppins
Paul Varney Phil McDonnell
Amanda Roberts Dan Luton
Terry Greer Stuart Poole
Nick Cook Jamie Toghill
Jane Barnett Martin Crompton
Pietro Lantro Neil McEwan
Julian Madle Anton Lorton
Andrew Morriss Matt Bridges
Chris Briggs
3D Scanning Steve Edwards
Alameda, CA
Alien World and Models Designed
Compatibility Group Hoi Nguyen
by Tim White
William Hom
Music and Sound Designed and Produced by John Broomhall Khoi Nguyen
Lead Composer Richard Wells U.S. Quality Assurance Lead Stewart Stanyard
Additional Music Dave Punshon
U.S. Quality Assurance Anthony Constantino XXVII
John Broomhall
Chris Evans
Sound Design Steve Cowell for Steve Head
PC Music Ltd. Brian King
Audio Post Production Matt Vowles for Stewart Holbrook
Sprockets and Bytes Jeffrey Wilkinson

Vocal Artists Valentina Britten Manual Author/Editor Justin Manning

Patrice Stauder Managing Editor Alkis Alkiviades
Julian Holman
Manual Artwork Jessica Crawley
Drew Northcott
Eddie Garnier Senior Product Manager Adrian Turner
Additional Audio Engineering Martin Severn U.S. Product Manager Tom Nichols
Darren Lambourne
Producer James Hawkins
A/V Systems incorporate HMI's Sound Operating System and RAD Stuart Whyte
Software's Smacker Video Technology Steve Goss
Grant Dean

204
p. 205
p.
CITYSCAPE DISPLAY Set Safe Mode 9
GENERAL Set Cautious Mode 0
Pause on/off z Set Aggressive Mode -
Time Controls 0, 1, 2, 3, 4, 5 Crawling 2
Switch Map View t Walking 3
Options O Running 4
UFOpaedia 1 Don’t Fire 5
Scroll W, A, S, Z Aimed-Shot 6
Quit Game q Snap-Shot 7 ®
VEHICLE ORDERS Auto-Shot 8
Go To Building s + LMB Kneel B
Attack Vehicle a + LMB Message History M
Center on Message h
SETTING DESTINATIONS
Select Squad 1, 2, 3, 4, 5, 6
Cancel q
Assign Selected Units to Squad
Add Waypoint c + LMB
c + 1, 2, 3, 4, 5, 6
MANUAL CONTROL (VEHICLES) Abort mission q
Activate Manual Control M
‘HAND’ AREA
Cancel q
Equip Unit Screen e
Increase Speed U
Decrease Speed Y Throw (left hand) [ ™
Increase Altitude (flying vehicles) h Throw (right hand) ]
Decrease Altitude (flying vehicles) j Drop (left hand) '
U-Turn (road vehicles) h Drop (right hand) \
Overtake (road vehicles) j PRIME GRENADE WINDOW
Set Direction RMB Accept Settings Y
Fire Weapon LMB Cancel N
MESSAGE PANEL REAL-TIME ONLY
Continue q Pause on/off z
Center On e
TURN-BASED ONLY
Toggle Message on/off z
End Turn E
TACTICAL GAME LOADING AND SAVING
GENERAL Saving A Game S
Switch Map View t Loading A Game L
Up Level Arrow U
Down Level Arrow Y GAME SCREENS
Toggle Map Level Display V OK/Cancel e/q
Switch Camera Mode C Scroll Bars W, A, S, Z

0-517-47-202
6-97