Scribd
Upload
85 views6 pages

Introduction To The Project: For The Design of The Structure, The Deadload, Live Loads, Seismic and Wind Load

The document discusses the design of a 7-story hospital building with a rectangular floor plan. Key details include a reinforced concrete structure with brick walls, concrete grades of M30 and M25, and rebar of grade Fe415. Structural analysis will be performed using ETABS software considering dead loads, live loads, seismic and wind loads. Design will follow IS456-2000 code and utilize limit state method. Literature review covers various methods for analyzing statically indeterminate structures like flexibility coefficient method, slope displacement method, and matrix method.

Uploaded by

Abdul Razzak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
85 views6 pages

Introduction To The Project: For The Design of The Structure, The Deadload, Live Loads, Seismic and Wind Load

The document discusses the design of a 7-story hospital building with a rectangular floor plan. Key details include a reinforced concrete structure with brick walls, concrete grades of M30 and M25, and rebar of grade Fe415. Structural analysis will be performed using ETABS software considering dead loads, live loads, seismic and wind loads. Design will follow IS456-2000 code and utilize limit state method. Literature review covers various methods for analyzing statically indeterminate structures like flexibility coefficient method, slope displacement method, and matrix method.

Uploaded by

Abdul Razzak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Hospital Building

Introduction to the project


Our main aim is to complete a Multi-storey building is to ensure that the structure is safe
and economical against all possible loading conditions and to fulfill the function for which they
have built.
Safety requirements must be so that the structure is able to serve it purpose with the
maintain cost.
Detailed planning of the structure usually comes from several studies made by town
planners, investors, users, architects and other engineers on that, and a structural engineer has
the main influence on the overall structural design and an architect is involved in aesthetic
details.
For the Design of the structure, the deadload, live loads, seismic and wind load

are considered.the analysis and design for the structure done by using a software package
ETABS
In this project multistoried construction, we have adoptedlimitstatemethodofanalysis
and design the structure. The design is in confirmation with IS456-2000.the analysis of Frame
is worked out by using ETABS

Statement of project
Salient Features: The design data shall be as follows.

1. Utility of Buildings: Hospital Building

3. No of Storey :(C+G+5).

4. Shape of the Building: Rectangular

5. No. Of Staircases: ONE

6. No. Of Lifts: One

7. Types of Walls: Brick Wall


8. Geometric Details

Ground Floor (G-2, G-1): 3.2 M

Floor-To-Floor Height: 3.0 M

Height of Plinth: 0.6 M above G.L

Depth of Foundation: 2 M below G.L

9. Material Details

Concrete Grade: M30, M25 (COLUMNS AND BEAMS)

All Steel Grades: HYSD REINFORCEMENT of Grade Fe415

Bearing Capacity of Soil: 200 KN/M2

10. Type of Construction: R.C.C FRAMED structure

ARCHITECTURAL LAYOUT DRAWINGS


STRUCTURAL ANALYSIS
procedure of structural analysis is simple in concept
but complex. In detail. It involves the analysis of a proposed structure to show that its resistance
or strength will meet or exceed a reasonable expectation. This expectation is usually expressed
by a specified load or the demand and an acceptable margined of safety that constitutes a
performance goal for a structure. The performance goals structural design is multifaceted.
Foremost, a structure must perform its intended function safely over its useful life.

The concept of useful life implies consideration of durability and established the basis for
considering the cumulative exposure to time varying risks (i.e. corrosive environments, that
performance is inextricably linked to cost, owners, builders, and designer must considers
economic limit to the primary goal of safety and durability.
In the view of the above discussion, structural designer may appear to have little control
over the fundamental goals of structural design except to comply with or exceed the minimum
limits established by law. While this is generally true, a designer can still do much to optimize
the design through alternative means and methods that can for more efficient analysis techniques,
creative design detailing, and the use of innovative construction materials and methods. In
summary the goal of structural design is defined by law and reflect the collective interpretation
of general public welfare by those involved in the development and local adoption of building
cloud
It is advantageous when kinematic indeterminacy< static indeterminacy. Alex Bendex first
formulated this procedure in 1914 based on the applications of compatibility and equilibrium of
compatibility and equilibrium conditions.
This method derives its name from the facts that supports and displacements are explicitly
computed. Set up simultaneous equation is formed from the solution of these parameters and the
Join moment in each or computed from these values.

E-TABS
6.1 Introduction
This chapter reviews about some of the fundamental concepts of structural
design and present them in a manner relevant to the design of light frame residential
structures. The concepts from the basis for understanding the design procedures and overall
design approach addressed in the remaining chapter of the guide. With this conceptual
background, it is hoped that the designer will gain a greater appreciation for creative and
efficient design of home, particularly the many assumptions that must be made.
The world is leading Structural Analysis and Design package for Structural
Engineers.

• Starting the Program.

• Creating a New Structure.

• Creating Joints and Members.

• Switching on Node and Beam Labels.

• Specifying Member Properties.

• Specifying Material Constants.

• Specifying Member Offsets.

• Printing Member Information.

• Specifying Supports.

• Specifying Loads.

• Specifying the Analysis type.

• Specifying Post-Analysis Print Commands.

• Specifying Steel Design Parameters.

Performing Analysis and Design


Literature Review

Method of analysis of statically indeterminate portal frame.

I. Method of Flexibility Coefficients.

II. Slope Displacement Method (IterativeMethods)

III. Moment Distribution Method.

IV. Kani’s Method (ApproximateMethod).

V. Cantilever Method.

VI. Portal Method.

VII. Matrix Method.

VIII. STADD Pro

IX. ETABS.

Methods of analyzing beams


Force method
Originally developed by James Clerk Maxwell in 1864, later developed by
Otto Mohr and Heinrich Muller-Breslau, the force method was one of the first methods available
for analysis of statically indeterminate structures. As compatibility is the basis for this method, it
is sometimes also called as compatibility method or the method of consistent displacements. In
this method, equations are formed that satisfy the compatibility and force-displacement
requirements for the given structure in order to determine the redundant forces. Once these
forces are determined, the remaining reactive forces on the given structure are found out by
satisfying the equilibrium requirements.

You might also like