Scribd
Upload
97 views2 pages

9700 Sanitary Seal: Machined Entirely Split To Make Installation A Cinch..

Uploaded by

Abd Al-Rahmman Al-qatanani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views2 pages

9700 Sanitary Seal: Machined Entirely Split To Make Installation A Cinch..

Uploaded by

Abd Al-Rahmman Al-qatanani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9700 Sanitary Seal

Machined entirely split to make


installation a Cinch...

The model 9700 CinchSeal® is


designed to seal mixing and blending
equipment. It is manufactured entirely
out of stainless steel to handle dry
powder and slurry products in the
food service, pharmaceutical and
chemical industries where stainless
steel is required.

• Eliminates product leakage, house


keeping issues, bearing and drive failure

• Installation requires no equipment


removal

• Shaft damage and wear is totally


eliminated due to the unique elastomer
design that turns with the shaft

• Eliminates product contamination caused


by the breaking down of braided packing

• Seals hazardous vapors and dust

• Consumes less power than braided


packing

• Will not damage or undercut shaft

CinchSeal • 731 Hylton Road • Pennsauken, NJ • 08110


856.662.5162 • 856.662.5264 • www.cinchseal.com
Exploded view of
How the 9700 Works
CinchSeal 9700
The heart of the 9700 CinchSeal is the FDA
Stainless Housing approved elastomer which is designed to create
an interference fit on the shaft. This tight fit al-
lows the elastomer to turn with the shaft and
thereby eliminating shaft damage or wear. The
elastomer seals the shaft and stops product
Elastomer Boot
from migrating past while also turning a set of
mineral filled PTFE rotor cups. As the elastomer
and rotor cups turn with the shaft they are com-
pressed with the optimum amount of face pres-
sure against a stationary face. The rotating face
against a stationary face is what creates the pri-
mary seal that stops product from getting by.
The PTFE rotor cups are designed to be the
wearable part of the seal and repair kits are
available. The repair kit consists of two new
PTFE split rotor cups and new split elastomer.
PTFE Rotor Cups The seal is designed to be purged with air 5 to
8 PSI over vessel pressure to keep rotating seal
faces cool and free of material. The 9700 seal is
O’Ring Stainless Plate easy to take apart, clean, and re-assemble for
daily maintenance.

Applications Available Accessories


The 9700 CinchSeal is proven effective in •Seal Repair Kits
sealing ribbon blenders, driers, and paddle
mixers used in processing dry powder, semi- •Air Pressure Regulators
solid and slurry applications. Among the par-
ticularly challenging materials we have been •CIP Option available
successful in sealing are: cement, spices,
cocoa powder, liquid chocolate, plastics and • Additional Elastomers
resins, salt, sugar, etc.

Purge Options Installation

All CinchSeals should be purged with ei- The 9700 CinchSeal should not be installed
ther plant air, nitrogen, or silicone grease. For on severely worn equipment. Damaged
best results, each seal should have an indi- shafts or excessive float or misalignment
vidual air regulator and not share. Air purg- should be corrected prior to installation. The
ing the seal creates a higher pressure inside seal must be mounted square to the shaft.
the seal cavity which creates an air barrier Please refer to installation guide when
that helps keep material inside the tank and mounting your seal. Call or visit our website
out of the seal which adds to the life of the if help is needed.
wearable parts of the seal.

You might also like