D A T A S H E E T

Power Supplies

High Voltage
REGULATED
Output Ranges:
0-1 kVdc to 0-30 kVdc
MODULAR AC-DC & DC-DC
• Shipped Within 6 Days
• Five Year Warranty
(internal encapsulated module - One Year)

RACK MOUNTING AC-DC
• Shipped Within 9 Days
• Five Year Warranty
(internal encapsulated module - One Year)

Don’t forget these facts about Acopian....

• Fast Shipping? Acopian invented it! For over half a century, Acopian has built and shipped
thousands of power supplies within 3-DAYS after receipt of order. And we still do today!
View our 3-DAY Shipping Promise: www.acopian.com/3dayship.html
• You ALWAYS talk to a real person when you call Acopian.
• Acopian power supplies last a very long time!
• You can email [email protected] anytime for 24/7 product support.
• The Online System Builder (www.acopian.com/SystemBuilder) is a convenient way to
get your own custom power supply or power system (and they ship within 9 Days).
• You can order Acopian power supplies factory direct.
• ALL Acopian products are made in the USA.

POW ER SU P P L IE S

Easton, PA & Melbourne, FL

1-800-523-9478 • www.acopian.com
Order Factory Direct
Made in USA
 High Voltage AC-DC
MODULAR
HIGH VOLTAGE AC – DC & DC – DC

REGULATED

Output ranges:
0- 1 kVdc to 0 - 30 kVdc

• Shipped Within 6 Days

• Five Year Warranty
(internal encapsulated module - One Year)

These modular High Voltage supplies may be used as

constant voltage or constant current sources. They may
be remotely programmed by means of either voltage or
resistance, and have provisions for remote monitoring and
output inhibiting. All control and monitoring connections
are on a pluggable terminal block that functions as a
connector, providing wiring convenience and permitting
easy and rapid connect/disconnect. Outputs are arc/short
circuit protected.

SPECIFICATIONS
Input Voltage: 105-125 VAC, 50-400 Hz, single phase. Stability: 0.05% over eight hours, after 30 minute
warmup.
Output Polarity: Positive output is standard. For negative
output, change first letter of model number from P to N. Temperature Coefficient: 200 PPM/°C = 0.02%/°C
(Typical).
Regulation (constant voltage operation):
Line: ±0.05% Ambient Operating Temperature: –10 to +60°C.
Load: ±0.05% No derating required.
Regulation (constant current operation): Storage Temperature: –20 to +85°C.
Line: ±0.1%
Humidity: Maximum of 90% relative, non-condensing.
Load: ±0.1% plus 50 µA.
Connections: 24˝ flying lead for high side of output and
Ripple: 0.05%, peak-to-peak.
5-way binding post for return (ground) are at the rear. AC
Output Controls: Voltage and current may be controlled input connections on separate terminal strip. All other
by means of two 20-turn front panel adjustments, or by connections on pluggable terminal block.
using remotely located 1000 ohm potentiometers.
Mounting: Threaded mounting holes permit mounting to
Output Programming: Output voltage and current may a chassis, cabinet wall or bracket, or they may be used
be programmed from 0 to full rating by means of control on a test bench or tabletop. To mount from the power
voltage inputs of 0 to +5.1 Vdc. supply side of the mounting surface, see accessory
Mounting Kit GB8 on page H3.
Voltage Monitor Terminal: Permits monitoring output
voltage, stepped down by ratio shown. Accuracy is 2% of OPTIONS
maximum rated output voltage. Terminal Strip Cover: Clips on AC input terminal strip.
Current Monitor Terminal: Permits monitoring output To order, add suffix “M” to model number and $5.00 to
current at mV/mA ratio shown. Accuracy is 2% of price.
maximum rated output current. Output Connector: Models with an output of 5000 volts
Inhibit Terminal: Grounding inhibits output. or less can be provided with an MHV connector (and
8 long detachable shielded output cable with mating MHV
Input Protection: “Soft start” circuit minimizes start-up connector installed on one end) instead of the flying lead.
power stresses. To order, add suffix letter “ T” to the model number and
Output Protection: Current regulation circuit protects $50.00 to price.
power supply from short circuits, overload, and arcing. 230 Volt Input: For operation on inputs of 210-250 VAC,
Efficiency: Greater than 70% at full load. 50-400 Hz, single phase. To order, add suffix “–230” to
model number and $40.00 to price. The “–230” option
Response Time: Less than 5 mS for 100 µA load step
requires two additional days.
change.

E1 Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
011519
 HIGH VOLTAGE AC – DC & DC – DC
AC-DC MODELS
Output Output Output Monitor Ratio Model
($)
Range
kVdc
Current
mA Voltage
Current
mV/mA Price ( Positive
Output )* Case
Size
0-1 30 1,000:1 100:1 725 P01HA30 HA349
0-1 60 1,000:1 10:1 835 P01HA60 HA359
0-1.5 20 1,000:1 100:1 725 P01.5HA20 HA349
0-1.5 40 1,000:1 100:1 835 P01.5HA40 HA359
0-2 15 1,000:1 100:1 725 P02HA15 HA349
0-2 30 1,000:1 100:1 835 P02HA30 HA359
0-2.5 12 1,000:1 100:1 725 P02.5HA12 HA349
0-2.5 24 1,000:1 100:1 835 P02.5HA24 HA359
0-3.5 8.5 1,000:1 100:1 725 P03.5HA8.5 HA349
0-3.5 17 1,000:1 100:1 835 P03.5HA17 HA359
0-5 6 10,000:1 100:1 795 P05HA6 HA349
0-5 12 10,000:1 100:1 905 P05HA12 HA359
0-7.5 4 10,000:1 100:1 795 P07.5HA4 HA349
0-7.5 8 10,000:1 100:1 905 P07.5HA8 HA359
0-10 3 10,000:1 1,000:1 795 P010HA3 HA349
0-10 6 10,000:1 100:1 905 P010HA6 HA359
0-12 2.5 10,000:1 1,000:1 795 P012HA2.5 HA349
0-12 5 10,000:1 100:1 905 P012HA5 HA359
0-15 2 10,000:1 1,000:1 835 P015HA2 HA349
0-15 4 10,000:1 100:1 945 P015HA4 HA359
0-18 1.6 10,000:1 1,000:1 835 P018HA1.6 HA349
0-18 3.2 10,000:1 1,000:1 945 P018HA3.2 HA359
0-20 1.5 10,000:1 1,000:1 945 P020HA1.5 HA349
0-20 3 10,000:1 1,000:1 1050 P020HA3 HA359
0-22 1.3 10,000:1 1,000:1 945 P022HA1.3 HA349
0-22 2.6 10,000:1 1,000:1 1050 P022HA2.6 HA359
0-25 1.2 10,000:1 1,000:1 1050 P025HA1.2 HA349 Case Approx.
0-25 2.4 10,000:1 1,000:1 1160 P025HA2.4 HA359 Size L W M V Q R Weight
0-30 1 10,000:1 1,000:1 1050 P030HA1 HA349 HA349 8.82 4.13 6.00 3.50 2.00 3.25 6 lb. 8 oz.
0-30 2 10,000:1 1,000:1 1160 P030HA2 HA359 HA359 9.33 5.13 7.00 4.50 2.78 4.25 10 lb.
* Positive output is standard. For negative output, change first letter
of model number from P to N.

All dimensions in inches.

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
E2
011519
 High Voltage DC-DC
MODULAR
HIGH VOLTAGE AC – DC & DC – DC

REGULATED

Output ranges:
0- 1 kVdc to 0 - 30 kVdc

• Shipped Within 6 Days

• Five Year Warranty
(internal encapsulated module - One Year)

DC inputs from 21.6 to 32.0 volts may be used for these

versatile power supplies. Although their outputs are
continuously adjustable from 0 to their maximum ratings,
20-turn controls permit precise setability.
These supplies have been designed to withstand severe
arcing and short circuits without damage. They are
ruggedly constructed with quality components to provide
many years of reliable service.

SPECIFICATIONS
Input Voltage: +21.6 to 32.0 Vdc. Efficiency: Greater than 70% at full load.
Output Polarity: Positive output is standard. For negative Response Time: Less than 5 mS for 100 µA load step
output, change first letter of model number from P to N. change.
Regulation (constant voltage operation): Stability: 0.05% over eight hours, after 30 minute
Line: ±0.05% warmup.
Load: ±0.05%
Temperature Coefficient: 200 PPM/°C = 0.02%/°C
Regulation (constant current operation): (Typical).
Line: ±0.1%
Load: ±0.1% plus 50 µA. Ambient Operating Temperature: –10 to +60°C.
No derating required.
Ripple: 0.05%, peak-to-peak.
Storage Temperature: –20 to +85°C.
Output Controls: Voltage and current may be controlled
by means of two 20-turn front panel adjustments, or by Humidity: Maximum of 90% relative, non-condensing.
using remotely located 1000 ohm potentiometers. Connections: 24˝ flying lead for high side of output
Output Programming: Output voltage and current may and 5-way binding post for return (ground). All other
be programmed from 0 to full rating by means of control connections on pluggable terminal block.
voltage inputs of 0 to +5.1 Vdc. Mounting: Threaded mounting holes permit mounting to
Voltage Monitor Terminal: Permits monitoring output a chassis, cabinet wall or bracket, or they may be used
voltage, stepped down by ratio shown. Accuracy is 2% of on a test bench or tabletop. To mount from the power
maximum rated output voltage. supply side of the mounting surface or for DIN rail
mounting, see accessory Mounting Kits on page H3.
Current Monitor Terminal: Permits monitoring output
current at mV/mA ratio shown. Accuracy is 2% of OPTIONS
maximum rated output current. Output Connector: Models with an output of 5000 volts
or less can be provided with an MHV connector (and 8
Inhibit Terminal: Grounding inhibits output. long detachable shielded output cable with mating MHV
Input Protection: “Soft start” circuit minimizes start-up connector installed on one end) instead of the flying lead.
power stresses. To order, add suffix letter “ T” to the model number and
$50.00 to price.
Output Protection: Current regulation circuit protects
power supply from short circuits, overload, and arcing.

E3 Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
011519
 HIGH VOLTAGE AC – DC & DC – DC
OPTIONAL OUTPUT CONNECTOR
Models with an output of 5000 volts or less can be
provided with an MHV connector (and 8 long detachable
output cable with mating MHV connector installed on one
end) instead of the flying lead. To order, add suffix letter
“T” to the model number and $50.00 to price.

DC-DC MODELS
Output Output Output Monitor Ratio Model
($)
Range
kVdc
Current
mA Voltage
Current
mV/mA Price (Positive
Output )* Case
Size
0-1 30 1,000:1 100:1 615 P01HD30 HD345
0-1 60 1,000:1 10:1 720 P01HD60 HD355
0-1.5 20 1,000:1 100:1 615 P01.5HD20 HD345
0-1.5 40 1,000:1 100:1 720 P01.5HD40 HD355
0-2 15 1,000:1 100:1 615 P02HD15 HD345
0-2 30 1,000:1 100:1 720 P02HD30 HD355
0-2.5 12 1,000:1 100:1 615 P02.5HD12 HD345
0-2.5 24 1,000:1 100:1 720 P02.5HD24 HD355
0-3.5 8.5 1,000:1 100:1 615 P03.5HD8.5 HD345
0-3.5 17 1,000:1 100:1 720 P03.5HD17 HD355
0-5 6 10,000:1 100:1 680 P05HD6 HD345
0-5 12 10,000:1 100:1 790 P05HD12 HD355
0-7.5 4 10,000:1 100:1 680 P07.5HD4 HD345
0-7.5 8 10,000:1 100:1 790 P07.5HD8 HD355
0-10 3 10,000:1 1,000:1 680 P010HD3 HD345
0-10 6 10,000:1 100:1 790 P010HD6 HD355
0-12 2.5 10,000:1 1,000:1 680 P012HD2.5 HD345
0-12 5 10,000:1 100:1 790 P012HD5 HD355
0-15 2 10,000:1 1,000:1 720 P015HD2 HD345
0-15 4 10,000:1 100:1 830 P015HD4 HD355
0-18 1.6 10,000:1 1,000:1 720 P018HD1.6 HD345
0-18 3.2 10,000:1 1,000:1 830 P018HD3.2 HD355
PLUGGABLE TERMINAL
0-20 1.5 10,000:1 1,000:1 830 P020HD1.5 HD345 BLOCK CONNECTIONS
0-20 3 10,000:1 1,000:1 940 P020HD3 HD355
0-22 1.3 10,000:1 1,000:1 830 P022HD1.3 HD345
0-22 2.6 10,000:1 1,000:1 940 P022HD2.6 HD355
0-25 1.2 10,000:1 1,000:1 940 P025HD1.2 HD345 Case Approx.
0-25 2.4 10,000:1 1,000:1 1045 P025HD2.4 HD355 Size W V R Weight
0-30 1 10,000:1 1,000:1 940 P030HD1 HD345
HD345 4.13 3.50 3.25 2 lb.
0-30 2 10,000:1 1,000:1 1045 P030HD2 HD355
HD355 5.13 4.50 4.25 2 lb. 12 oz.
* Positive output is standard. For negative output, change first letter
of model number from P to N.

All dimensions in inches.

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
E4
011519
 High Voltage AC-DC
RACK MOUNTING
HIGH VOLTAGE AC – DC & DC – DC

REGULATED

Output ranges:
0- 1 kVdc to 0 - 30 kVdc

• Shipped Within 9 Days

• Five Year Warranty
(internal encapsulated module - One Year)

Ideal for laboratory and instrumentation applications,

these rack mounting supplies have the same output
ratings and specifications as the modular supplies shown
on pages 70 and 71, but additionally feature calibrated
ten-turn controls (with locking vernier dials) for precisely
setting voltage and current. Voltmeter, ammeter and
handles are standard. An 8 long shielded output cable is
included.

SPECIFICATIONS
Input Voltage: 105-125 VAC, 50-400 Hz, single phase. Output Programming: Output voltage and current may
be programmed from 0 to full rating by means of control
Input Current:
voltage inputs of 0 to +5.1 Vdc, ±2%.
30 watt output ratings: 0.6A
60 watt output ratings: 1.2A Output Protection: Current regulation circuit protects
power supply from short circuits, overload, and arcing.
Output Polarity: Positive output is standard. For negative
output, change first letter of model number from P to N. Response Time: Less than 5 mS for 100 µA load step
change.
Regulation (constant voltage operation): Stability: 0.05% over eight hours, after 30 minute
Line: ±0.05% warmup.
Load: ±0.05%
Temperature Coefficient: 200 PPM/°C = 0.02%/°C
Regulation (constant current operation): (Typical).
Line: ±0.1%
Ambient Operating Temperature: –10 to +60°C.
Load: ±0.1% plus 50 µA.
No derating required.
Ripple: 0.05%, peak-to-peak. Storage Temperature: –20 to +85°C.
Output Controls: Voltage and current may be controlled Humidity: Maximum of 90% relative, non-condensing.
by means of two 10-turn front panel adjustments with
Connections:
locking vernier dials. Control linearity is 1% of full rated Input, Control and Monitoring: Screw terminals.
output. Calibration accuracy is 1% of rated output Output: High voltage connector (Type varies with
plus 1% of setting. (Remotely located 1000 ohm model number). An 8 shielded output cable, with
potentiometers may alternately be used for output control.) mating connector installed, is provided.
Metering: Voltmeter and ammeter are standard. Accuracy OPTIONS
is 2% of full scale. Terminal Strip Cover: Clips on AC input terminal strip.
Voltage Monitor Terminal: Permits remote monitoring of To order, add suffix “M” to model number and $5.00 to
output voltage, stepped down by ratio shown. Accuracy is price.
2% of maximum rated output voltage. 230 Volt Input: All models can be alternately furnished for
operation on inputs of 210-250 VAC, 50-400 Hz,
Current Monitor Terminal: Permits remote monitoring of single phase. To order, add suffix “–230” to model number
output current, at mV/mA ratio shown. Accuracy is 2% of and add $40.00 to price. The “–230” option requires two
maximum rated output current. additional days.
Inhibit Terminal: Grounding inhibits output.
Input Protection: “Soft start” circuit minimizes start-up
power stresses.

E5 Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
011519
 HIGH VOLTAGE AC – DC & DC – DC
AC-DC MODELS
Output Output Output Monitor Ratio Model
($)
Range
kVdc
Current
mA Voltage
Current
mV/mA Price (Positive
Output )* Voltage Adjust Current Adjust

0-1 30 1,000:1 100:1 1175 P01HP30

0-1 60 1,000:1 10:1 1280 P01HP60 31⁄2
Voltmeter Ammeter
0-1.5 20 1,000:1 100:1 1280 P01.5HP20 conn

0-1.5 40 1,000:1 100:1 1390 P01.5HP40

Power Switch Handles(2) 5.6
0-2 15 1,000:1 100:1 1175 P02HP15
19.0" 1.25 .78
0-2 30 1,000:1 100:1 1280 P02HP30
0-2.5 12 1,000:1 100:1 1175 P02.5HP12
0-2.5 24 1,000:1 100:1 1280 P02.5HP24
External control connections REAR VIEW 1.375
0-3.5 8.5 1,000:1 100:1 1175 P03.5HP8.5
.375

0-3.5 17 1,000:1 100:1 1280 P03.5HP17 5 E ADJ. 10 SIG GND

OUTPUT
3 1⁄2
4 E PRGM 9 E MONTR
0-5 6 10,000:1 100:1 1230 P05HP6 .375
3 I ADJ. 8 I MONTR AC AC
L N
2 I PRGM 7 PRGM REF
1.937 2.4
0-5 12 10,000:1 100:1 1340 P05HP12 1 INHIBIT 6 PRGM GND
OUTPUT RTN FUSE .69
0-7.5 4 10,000:1 100:1 1230 P07.5HP4
0-7.5 8 10,000:1 100:1 1340 P07.5HP8 1.75
0-10 3 10,000:1 1,000:1 1230 P010HP3 3.88
0-10 6 10,000:1 100:1 1340 P010HP6 12.8
0-12 2.5 10,000:1 1,000:1 1230 P012HP2.5 15.3
0-12 5 10,000:1 100:1 1340 P012HP5
17.0
0-15 2 10,000:1 1,000:1 1280 P015HP2
0-15 4 10,000:1 100:1 1390 P015HP4
0-18 1.6 10,000:1 1,000:1 1280 P018HP1.6
0-18 3.2 10,000:1 1,000:1 1390 P018HP3.2 Case Size HP36
0-20 1.5 10,000:1 1,000:1 1280 P020HP1.5 Approx. Weight: 10 lb. 2 oz. to 13 lb. 13 oz.
0-20 3 10,000:1 1,000:1 1390 P020HP3
0-22 1.3 10,000:1 1,000:1 1340 P022HP1.3
0-22 2.6 10,000:1 1,000:1 1445 P022HP2.6 All dimensions in inches.
0-25 1.2 10,000:1 1,000:1 1390 P025HP1.2
0-25 2.4 10,000:1 1,000:1 1500 P025HP2.4
0-30 1 10,000:1 1,000:1 1390 P030HP1
0-30 2 10,000:1 1,000:1 1500 P030HP2

* Positive output is standard. For negative output, change first

letter of model number from P to N.

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
E6
011519
 WALL MOUNTING KITS ...$10
These kits provide a way of mounting power supplies on a wall or panel when the other side of the .375
1.5
1.125
.125

mounting surface is inaccessible. Each kit consists of four aluminum brackets and four machine screws
for fastening them to the power supply, effectively adding mounting flanges to the power supply. .75
OTHER PRODUCTS & INFO

For ‘Gold Box’ and (modular) ‘High Voltage’ power supplies: .171 dia .375

GB8 Mounting Kit (#8-32 mounting holes) All dimensions in inches.

Can be used on these case sizes:

CM6, CM9, CM13, CH11, CH16, DG5, DG6, DG9, G3, G5, G5D, G6, G9, G13, GT5, GT6, GT9,
GT13, H8, H11, H16, HD345, HD355, HA349, HA359, HT11, HT16, LM6A*, LM8A*, LM10A*, M6,
M9, M13, RM6, RW6 TG5, TG6, TG9, TG13, TH11, WG7, WM6, WM9, Y3, Y5, Y6, YH11, YA
*For rear mounting brackets horizontally on LM cases only, use GBR Mounting Kit...$15
For ‘Narrow Profile’ power supplies: BOTTOM
MOUNTING
NP6 Mounting Kit (#6-32 mounting holes)
Can be used on these case sizes:
AMC, CN8T, DN6B, DN6A, DN8A, DN8, F6T, F8T, N8T,
WL9, WN6A, WN6B, WN8, WN8A, WN8B, TN6T
NP6L Mounting Kit (#6-32 mounting holes) SIDE
MOUNTING

Can be used on these case sizes:

CN8H, N8H, TN8H REAR
MOUNTING
Model NP6L consists of two brackets 1.5” long as shown above, and two 2.5” long brackets (to extend beyond heat sink).

DIN RAIL MOUNTING KITS ...$15*

CH35DIN Mounting Kit (Horizontal mounting) NPV35DIN Mounting Kit (Vertical mounting)
Can be used on these case sizes: RM6, RW6 Can be used on these case sizes:
GH35DIN Mounting Kit (Horizontal mounting) CN8H DN6A F6T N8H TN6T WN6A
Can be used on these case sizes: CN8T DN6B F8T N8T TN8H WN6B
CM6 DG5 G3 GT5 M6 TG5 Y3 DN8 WN8
CM9 DG6 G5 GT6 M9 TG6 Y5 DN8A WN8A
CM13 DG9 G5D GT9 M13 TG9 Y6 WN8B
G6 GT13 TG13 WH35DIN Mounting Kit (Horizontal mounting)
G9 Can be used on these case sizes: WM6, WM9
G13
WL35DIN Mounting Kit (Vertical mounting)
GR35DIN Mounting Kit (Rear mounting) WLH35DIN Mounting Kit (Horizontal mounting)
Can be used on these case sizes: Can be used on these case sizes: WL7, WL9
CM6 DG5 G3 GT5 HD345 M6 RM6 TG5 Y3
CM9 DG6 G5 GT6 HD355 M9 RW6 TG6 Y5
DG9 G5D GT9 TG9 Y6
(GR35DIN can be used, but is
G6 not recommended on case sizes:
G9 G13, GT13, M13, TG13)

LR35DIN Mounting Kit (Rear mounting)*

*
LV35DIN Mounting Kit (Vertical mounting) GH35DIN LH35DIN NPH35DIN

*
LH35DIN Mounting Kit (Horizontal mounting)
Can be used on these case sizes: LM6A, LM8A, LM10A Locking

*
Screw
All DIN Kits for LM cases $20
NPH35DIN Mounting Kit (Horizontal mounting)
Can be used on these case sizes:
CN8H DN6A F6T N8H TN6T WN6A
GR35DIN LR35DIN NPV35DIN
CN8T DN6B F8T N8T TN8H WN6B
DN8 WN8
DN8A WN8A
WN8B
NPR35DIN Mounting Kit (Rear mounting)
Can be used on these case sizes:
CN8H F6T N8H TN6T
CN8T F8T N8T TN8H WLH35DIN WH35DIN NPR35DIN

H3 Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
011519
ACOPIAN SELLS FACTORY DIRECT WORLDWIDE: We do not use representatives or distributors. Contact Acopian for technical information or a quote.
WARRANTY: Acopian power supplies are warranted to be free from defects in material and workmanship for a period of five years (encapsulated devices, for
one year) from date of original shipment. Acopian’s obligation under this warranty is limited to repairing any power supply returned to the factory Service
Department in Easton, PA or Melbourne, FL, and replacing any defective parts. Mini Encapsulated power supplies are not repairable. Authorization must be
obtained from Acopian before a power supply may be returned for repair. Units must be well packed when shipping to Acopian; the repair of any damage incurred

OTHER PRODUCTS & INFO

during shipment will be charged. Transportation charges are to be paid by the purchaser. A reinspection and handling charge will be applied to returned units
found to have no defects. If a failure has been caused by misuse, operation in excess of specifications, or modification by the customer, repairs will be billed
at cost; in such cases, a cost estimate will be submitted before work is started.
Acopian reserves the right to make changes or improvements in its products without incurring any obligation to install the same on products previously
manufactured.
This warranty is in lieu of all other warranties, obligations, and liabilities, expressed or implied, and is the purchaser’s exclusive remedy. Acopian makes
no warranty, either express or implied, of merchantability, fitness for a particular purpose or otherwise. In no event shall Acopian be liable whether in contract,
tort, or negligence, for special, indirect, incidental or consequential damages of any kind, including loss of business or profits, or any other losses incurred by
the purchaser or any third party, the Customer’s remedies being limited, at Acopian’s option, to replacement, repair or credit at the price on the date of claim.
The validity, performance and construction of all terms and conditions and any sale made by Acopian shall be determined by the law of Pennsylvania,
without regard to its conflict of law principles, and all parties to the transaction expressly consent to the jurisdiction of such courts and consent to the venue of
the Court of Common Pleas for Northampton County, Pennsylvania.
PRICES: The prices shown are F.O.B. our factory; Easton, PA or Melbourne, FL. (‘EXW Factory’ if outside the 50 United States.) All prices and specifications
are subject to change without notice.
TERMS: Net 30 days, subject to credit approval. Visa, MasterCard and American Express also accepted.
SHIPPING: Location permitting, small shipments are made by United Parcel Service, FedEx, DHL (international orders) or by Parcel Post; larger shipments,
by insured motor freight collect. Shipments can be made by air upon request. Risk of loss shall be F.O.B. Our Factory, even in cases where freight may be
prepaid or allowed to destination by Acopian. If equipment is received in damaged condition, it is the customer’s responsibility to contact the carrier and file a
claim for damages.
TIME FOR DELIVERY: The time for delivery quoted by Acopian is the time required to ship from our plants. We will not be liable for delays in delivery caused
by any reason beyond our control, including but not limited to acts of God, casualty, civil disturbance, labor disputes, transportation or supply difficulties, or any
interruption of our facilities, and the quoted time for delivery shall be extended during the continuance of such conditions and for a reasonable time thereafter.
In no event will Acopian be liable for any premium transportation, reprocurement, or similar costs incurred by the Customer as a result of conditions beyond
Acopian’s control resulting in Acopian’s inability to deliver product in accordance with customer’s requested delivery schedules.
QUANTITY DISCOUNTS: Discounts are available to quantity buyers and are dependent upon the order quantity and the manufacturing scheduling anticipated
by the order, and apply only to the quantity and delivery ordered. Partial shipments are considered as separate orders for discounting purposes.
EXPORT ORDERS: A minimum export documentation charge of $60.00 applies. (A minimum charge of $25.00 applies on orders to certain U.S. territories
requiring customs forms.)
MOISTURE/FUNGUS PROOFING: Power supplies can be furnished with a moisture and fungus resistant varnish applied to interior surfaces. To order, add
the suffix letter F to the model number. This option requires two additional days and is not available on High Voltage, Mini Encapsulated, Rack Mounting, and
Gold Box Switching models.
TAGGING: Add $10.00 to price.
TEST DATA: Cost, $35.00 or 2% of order, whichever is greater.
SPECIAL MODELS/MODIFICATIONS: Cataloged models can be altered at the factory to meet special requirements. Contact the Applications Engineering
Department to discuss your needs.
PARTS: The designs used in Acopian power supplies utilize standard components to the greatest practical extent. When replacements are required, the types
originally used, or their equivalents, can usually be obtained most quickly from a local electronic components distributor.
Special components, such as transformers, are stocked at the factory warehouses. Contact the Applications Engineering Department for information on
the parts required, referencing the model number of the power supply, the circuit designation of the component, and a description.
PURCHASE ORDER ACCEPTANCE: Orders are accepted subject to Acopian’s Terms and Conditions. Any Terms and Conditions of any Purchaser’s order,
agreement, or understanding which are in addition to or inconsistent with Acopian’s shall not be binding upon Acopian unless made in writing and accepted
over the signature of an authorized officer of Acopian. Orders shall not be considered accepted until entered into production at our plant. Acopian reserves the
right to refuse any order. All typographical and clerical errors are subject to correction by Acopian.
RETURNED GOODS: Acopian products are built on a per-order basis, and ordinarily no credit can be extended for their return. No goods will be accepted for
return unless authorized in writing by Acopian.
CHANGES: The customer may, by a written notice, request changes within the general scope of the order, in the drawings, designs or specifications; method
of shipment; and place of delivery. If any such change causes an increase or decrease in the cost, or the time required for the processing of any part of the
order, an equitable adjustment shall be made in the price or delivery schedule, or both, and the order shall be modified in writing accordingly.
CANCELLATION: Suspension or cancellation of orders may be made only upon our written approval and on terms that will indemnify us against all loss.
OVERTIME: It is anticipated that any order will be processed during regular working hours on regular working days. If for any reason the Purchaser requests
Acopian to process the order, or any portion of it, outside of such regular working hours, any overtime or other additional expense occasioned thereby shall be
billed to and paid by the Purchaser as an extra cost. Acopian reserves the right to decline to process the order outside regular working hours.
CUSTOMER DELAY OF WORK: If the performance of all or any part of the work is delayed or interrupted by Customer’s failure to act within the time specified
(or within a reasonable time if no time is specified) and such act is not expressed or implied by the order, an adjustment shall be made in the cost of performance
of the order caused by such delay or interruption and the order modified in writing accordingly. Adjustment will also be made in the delivery or performance
dates and any other contractual provisions affected by such delay or interruption.
GOVERNMENT SPECIFICATIONS: Pricing is based upon industrial-grade construction, marking, packing, and packaging. Exception is taken to any MIL
specifications, and to any requirements for the use of special forms, documentation other than quoted, and Government Source Inspection. Acopian must decline
to quote on any other basis.
APPLICATIONS ASSISTANCE: Questions regarding the specifications, features, and use of any Acopian product should be directed to the
Applications Engineering Department. A staff of power supply specialists will be pleased to assist you.
ACOPIAN IS AN ISO 9001 CERTIFIED COMPANY

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
H8
011519