Scribd
Upload
168 views2 pages

OPMP-01-Kit Installation Instructions: Cabinet Panel Mounting Kit, OPMP-01 Shipping Package Includes

Uploaded by

leonardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views2 pages

OPMP-01-Kit Installation Instructions: Cabinet Panel Mounting Kit, OPMP-01 Shipping Package Includes

Uploaded by

leonardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

OPMP-01-Kit Installation Instructions

3AUA0000013204 / REVB / October 1, 2008


Cabinet Panel Mounting Kit, Shipping Package Includes:
OPMP-01
1. Mounting Template.
The Control Panel Mounting Platform alows remote 2. Cat5 Patch Cable 10 ft.
mounting of an ACS-CP-C/A operator Panel on a larger 3. Stainless Steel Compression Bracket.
enclosure or remotely. The kit maintains UL Type 12 4. Gaskets (for operator panel).
integrity of the mounting location. Adapters, 3 m (10 ft) 5. Plastic bag with 6 screws.
cable and mounting hardware are included in this kit. 6. Panel Platform (Interface board and 2
With this mounting arrangement, the operator panel is gaskets installed).
removable identical to a drive-mounted keypad. 7. Installation Instructions.


© 2008 ABB Inc. All Rights Reserved.
1. Take Operator Panel and Gaskets (# 4). 2. Turn your Operator Panel face down and separate ring 3. Place the Gasket around the Battery Compartment.
gasket from middle section.

6. Take the mounting template and make a hole exactly


4. Separate square gasket from middle section. 5. Place the Gasket around the Panel Connector. the same size as the template on the door or wall for
installation of the Panel Mounting Platform.
OPMP-01-Kit Installation Instructions (Cont.)

3AUA0000013204 / REVB / October 1, 2008


9. Align screw openings of the stainless steel bracket in
7. Insert the Panel Platform in the hole. 8. Insert the Stainless Steel Compression Bracket. the platform holes with screws. Screw six (6) screws in
place.

© 2008 ABB Inc. All Rights Reserved.


10. Attach the Cat5 Patch 10 ft Cable from the drive to the 11. Attach the Panel Connector from your drive to the Kit. 12. Insert your Operator Panel into the Panel Mounting
top panel connection on the interface board. Platform.

You might also like