0% found this document useful (0 votes)
1K views14 pages

Nyquist Criterion

(1) The Nyquist criterion for zero intersymbol interference (ISI) in baseband binary transmission is that the Fourier transform P(f) of the pulse-shaping filter satisfies ∑n=-∞+∞ P(f - n/T) = T. (2) The ideal Nyquist channel uses a sinc pulse and achieves the minimum possible bit period T = 1/(2B0). (3) The raised cosine spectrum allows T > 1/(2B0) and has better convergence than the ideal sinc pulse.

Uploaded by

leorom1234
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
1K views14 pages

Nyquist Criterion

(1) The Nyquist criterion for zero intersymbol interference (ISI) in baseband binary transmission is that the Fourier transform P(f) of the pulse-shaping filter satisfies ∑n=-∞+∞ P(f - n/T) = T. (2) The ideal Nyquist channel uses a sinc pulse and achieves the minimum possible bit period T = 1/(2B0). (3) The raised cosine spectrum allows T > 1/(2B0) and has better convergence than the ideal sinc pulse.

Uploaded by

leorom1234
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

4.

Nyquist Criterion for Distortionless


Baseband Binary Transmission

Objective: To design hT (t ) and hd (t ) under the


following two conditions:

(a). There is no ISI at the sampling instants (Nyquist


criterion, this section ).

(b). A controlled amount of ISI is allowed (correlative


coding, next section)

@G. Gong 1
Design of Bandlimited Signals for Zero
ISI - Nyquist criterion
Recall the output of the receiving filter,
sampled at t = kT, is given by


y (kT ) = µbk + µ bn p( kT − nT ) + no (kT )
n≠ k

Thus, in time domain, a sufficient condition for µp(t) such


that it is ISI free is
1 n=0
p ( nT ) =  (1)
0 n≠0
Question. What is the condition for P(f) in order for p(t) to
satisfy (1) (Nyquist, 1928)?

@G. Gong 2
Theorem. (Nyquist) A necessary and and sufficient
condition for p(t) to satisfy (1) is that the Fourier
transform P(f) satisfies


n
P( f − ) = T (2)
n
T

This is known as the Nyquist pulse-shaping criterion or


Nyquist condition for zero ISI.
Proof.

@G. Gong 3
Proof. When we sample p (t ) at On the other hand
t = kT , k = 0, ± 1, ± 2,L ,
we have the following pulses
Pδ ( f ) =
k

p (kT ) F (δ (t − kT ))


pδ (t ) ≡ p(t ) δ (t − kT )
k
( p(kT ) is constant for t.)

= ∑ p(kT )δ (t − kT )
k
= ∑ p(kT ) exp(− j 2πfkT )
k

The Fourier transform of pδ (t ) = 1 ( from (1) ) ( 4)


is given by
From (3) and (4), ISI free ⇔
Pδ ( f ) = F ( pδ (t ))
 

1 k
= F

 k
∑ p ( kT )δ (t − kT ) 


T k
P( f − ) = 1
T

which gives the result in (2).



1 k
= P( f − ) ( 3)
T k
T
Investigate possible pulses which
satisfy the Nyquist criterion
Suppose that the channel has a bandwidth of W, then

H c ( f ) = 0 for | f |> W
Since P( f ) = H T ( f ) H c ( f ) H d ( f ) , we have

P ( f ) = 0 for | f |> W

We write Z ( f ) = ∑ P ( f − n / T )
n

and distinguish the following three cases:

@G. Gong 5
Z(f)

-1/T-W -1/T -1/T+W -W W 1/T-W 1/T 1/T+W f


Fig. 4.1 Z(f) for the case T < 1/(2W)
Z(f)

1
-1/T W= 1/T f
2T

Fig. 4.2 Z(f) for the case T = 1/(2W)


Z(f)

-1/T -W 1/T-W W 1/T f


-1/T+W

Fig. 4.3 Z(f) for the case T > 1/(2W)


1 1
1. T< , or > 2W
(i.e., bit rate > 2W, impossible!) No
2W T
choices for P(f) such that Z(f) = 0.

1 1
2. T= , i.e., W= (the Nyquist rate)
2W 2T
In this case, if we choose
T | f| ≤ W  f 
P( f ) =  i.e., P ( f ) = T ⋅ rect  
0 otherwise  2W 
t
which results in p (t ) = sin c  
T 
This means that the smallest value of T for which the
transmission with zero ISI is possible is
1 1 This is called the ideal
T= ( R≡ = 2W, bit rate )
2W T Nyquist channel.
@G. Gong 7
In other words,

Ideal Nyquist channel :


1
R = 2 Bo =
T
W = Bo ( R = Rb , T = Tb )

@G. Gong 8
Disadvantages:

(a) an ideal LPF is not physically realizable.

(a) Note that


t  1
p (t ) = sin c   ∝
T  |t |

Thus, the rate of convergence to zero is slow since the


tails of p(t) decay as 1/|t|.

Hence, a small mistiming error in sampling the output


of the matched filter at the demodulator results in an
infinite series of ISI components.

@G. Gong 9
1
T>
1 < 2W
3. For , i.e,
2W
, in this case, there exists
T
numerous choices for P(f) such that Z(f) = T. The
important one is so called the raised cosine spectrum.

The raised cosine frequency characteristic is given by

 1
 2B 0 ≤ f < (1 − α ) B0
 0
 1  π (| f | −(1 − α ) B0 ) 
P( f ) =  1 + cos  (1 − α ) B0 ≤ f < (1 + α ) B0
 4 B0  2αB0 
0 f ≥ (1 + α ) B0



where α ∈ [0,1] is called the rolloff factor and


R
B0 =
2
1
( i.e., B0 = ) .
2T
@G. Gong 10
1
2B0

− B0 B0 f
− (1 + α ) B0 − (1 − α )B0 (1 − α ) B0 (1 + α ) B0

Z(f) = T by the following sum of three terms at any


interval of length 2Bo:

P( f ) + P( f − 2 B0 ) + P ( f + 2 B0 ) = T − B0 ≤ f ≤ B0

P( f ) + P( f − 2 B0 ) + P( f + 2 B0 ) = T B0 ≤ f ≤ 3B0


The time response p(t), the inverse Fourier transform of
P(f), is given by

cos2παB0t
p (t ) = sinc 2 B0t (5)
1 − 16α B0 t
2 2 2

This function has much better convergence property than


the ideal Nyquist channel. The first factor in (5) is
associated with the ideal filter, and the second factor that
decreases as 1/|t|2 for large |t|. Thus

1
p (t ) ∝ 3
t

@G. Gong 12
@G. Gong 13
Summary:

Nyquist Criteria
+∞
1

n = −∞
P ( f − nR) = T , R =
T

-Bo Bo

Ideal Nyquist Channel


Raised Cosine Spectrum

@G. Gong 14

You might also like