Authorised distributor of:

Technical specification

MV ELINE ENTERPRISE
Dry Dock

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

08/11/2020 Page: 1
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Summary

The paint specification(s) include(s) the following positions and areas

Position Area (sq.m)
Flat Bottom (From bilge keel to bilge keel) 1,600
Side bottom (From bilge keel to scantling draft) 650
Topside & Ext Bulwark 760
Internal Cargo holds (Except Top) 1,700
Crane Pondation 100
Total: 4,810

Summary of products and volumes

Product Color Consumption (ltr)

JOTAMASTIC 80 ALUMINIUM 860

SAFEGUARD UNIVERSAL ES PLUM 378
SEAFORCE SHIELD DARK RED 422
JOTAFIX PU TOPCOAT Blue 138 166
JOTAFIX PU TOPCOAT GREY RAL 7001 371
JOTAFIX PU TOPCOAT RAL 1002 22
Jotun Thinner No. 17 248
Jotun Thinner No. 7 84
Jotun Thinner No. 10 112

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 2
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Total: 2,663

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 3
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Position: Flat Bottom (From bilge keel to bilge keel) Area (sq.m): 1600

Surface preparation: Remove oil, grease, salt and other contaminants with a suitable detergent followed by fresh water cleaning. When the surface is dry: Abrasive blast cleaning to Sa 2 ½ (ISO 8501-1).

My Product List - System no: NA

Filmthickness (µm) Recoating intervals
Area 5 (°C) 10 15 23 40
Coat to Vol. Wet (°C) (°C) (°C) (°C) Spread rate Consumption
Product Color Dry Film Loss Thinner
no solids Film (sq.m/ltr) inc. loss
paint
% % Min Spec. Max Spec. % Min Min Min Min Min No. Max (%) Theor. Pract. (ltr)
1 JOTAMASTIC 80 ALUMINIUM 50 80 75 150 200 188 20 24 h 10 h 4h 17 20 5.33 4.26 188
SAFEGUARD
2 PLUM 100 62 50 80 200 129 20 24 h 18 h 10 h 6h 17 20 7.75 6.20 258
UNIVERSAL ES
SEAFORCE
3 DARK RED 100 63 75 80 175 127 20 9h 7h 6h 7 20 7.88 6.30 254
SHIELD
Total: 200 310 575 Total: 700
* please refer to the relevant technical datasheets for recoating and curing conditions
Antifouling details

Dry dock interval (months) Voyage factor (%) Average sea water temperature (°C) Average vessel speed (knots)
36 70 29 10

Remarks:

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 4
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Position: Side bottom (From bilge keel to scantling draft) Area (sq.m): 650

Surface preparation: Remove oil, grease, salt and other contaminants with a suitable detergent followed by fresh water cleaning. When the surface is dry: Abrasive blast cleaning to Sa 2 ½ (ISO 8501-1).

My Product List - System no: NA

Filmthickness (µm) Recoating intervals
Area 5 (°C) 10 15 23 40
Coat to Vol. Wet (°C) (°C) (°C) (°C) Spread rate Consumption
Product Color Dry Film Loss Thinner
no solids Film (sq.m/ltr) inc. loss
paint
% % Min Spec. Max Spec. % Min Min Min Min Min No. Max (%) Theor. Pract. (ltr)
1 JOTAMASTIC 80 ALUMINIUM 50 80 75 150 200 188 30 24 h 10 h 4h 17 20 5.33 3.73 87
SAFEGUARD
2 PLUM 100 62 50 80 200 129 30 24 h 18 h 10 h 6h 17 20 7.75 5.43 120
UNIVERSAL ES
SEAFORCE
3 DARK RED 100 63 75 130 175 206 20 9h 7h 6h 7 20 4.85 3.88 168
SHIELD
Total: 200 360 575 Total: 375
* please refer to the relevant technical datasheets for recoating and curing conditions
Antifouling details

Dry dock interval (months) Voyage factor (%) Average sea water temperature (°C) Average vessel speed (knots)
36 70 29 10

Remarks:

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 5
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Position: Topside & Ext Bulwark Area (sq.m): 760

Surface preparation: Remove oil, grease, salt and other contaminants with a suitable detergent followed by fresh water cleaning. When the surface is dry: Abrasive blast cleaning to Sa 2 ½ (ISO 8501-1).

My Product List - System no: NA

Filmthickness (µm) Recoating intervals
Area 5 (°C) 10 15 23 40
Coat to Vol. Wet (°C) (°C) (°C) (°C) Spread rate Consumption
Product Color Dry Film Loss Thinner
no solids Film (sq.m/ltr) inc. loss
paint
% % Min Spec. Max Spec. % Min Min Min Min Min No. Max (%) Theor. Pract. (ltr)
1 JOTAMASTIC 80 ALUMINIUM 50 80 75 150 200 188 30 24 h 10 h 4h 17 20 5.33 3.73 102
JOTAFIX PU
2 Blue 138 100 61 50 80 80 131 40 24 h 14 h 7h 4h 10 20 7.63 4.58 166
TOPCOAT
Total: 125 230 280 Total: 268
* please refer to the relevant technical datasheets for recoating and curing conditions

Remarks:

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 6
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Position: Internal Cargo holds (Except Top) Area (sq.m): 1700

Surface preparation: Remove oil, grease, salt and other contaminants with a suitable detergent followed by fresh water cleaning. When the surface is dry: Abrasive blast cleaning to Sa 2 ½ (ISO 8501-1).

My Product List - System no: NA

Filmthickness (µm) Recoating intervals
Area 5 (°C) 10 15 23 40
Coat to Vol. Wet (°C) (°C) (°C) (°C) Spread rate Consumption
Product Color Dry Film Loss Thinner
no solids Film (sq.m/ltr) inc. loss
paint
% % Min Spec. Max Spec. % Min Min Min Min Min No. Max (%) Theor. Pract. (ltr)
1 JOTAMASTIC 80 ALUMINIUM 100 80 75 150 200 188 30 24 h 10 h 4h 17 20 5.33 3.73 456
JOTAFIX PU GREY RAL
2 100 61 50 80 80 131 40 24 h 14 h 7h 4h 10 20 7.63 4.58 371
TOPCOAT 7001
Total: 125 230 280 Total: 827
* please refer to the relevant technical datasheets for recoating and curing conditions

Remarks:

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 7
 Authorised distributor of:

Technical specification

Customer: PT Laju Perkasa Abadi Contact person: Mr. Dadang Expiry date: 08/02/2021
Project title: MV ELINE ENTERPRISE Location: PT. GAMATARA Cirebon Version: 1
Issued by: PT. MITRA WARNA UTAMA Prepared by: Yuzaldhi Hartlan

Position: Crane Pondation Area (sq.m): 100

Surface preparation: Remove oil, grease, salt and other contaminants with a suitable detergent followed by fresh water cleaning. When the surface is dry: Abrasive blast cleaning to Sa 2 ½ (ISO 8501-1).

My Product List - System no: NA

Filmthickness (µm) Recoating intervals
Area 5 (°C) 10 15 23 40
Coat to Vol. Wet (°C) (°C) (°C) (°C) Spread rate Consumption
Product Color Dry Film Loss Thinner
no solids Film (sq.m/ltr) inc. loss
paint
% % Min Spec. Max Spec. % Min Min Min Min Min No. Max (%) Theor. Pract. (ltr)
1 JOTAMASTIC 80 ALUMINIUM 100 80 75 150 200 188 30 24 h 10 h 4h 17 20 5.33 3.73 27
JOTAFIX PU
2 RAL 1002 100 61 50 80 80 131 40 24 h 14 h 7h 4h 10 20 7.63 4.58 22
TOPCOAT
Total: 125 230 280 Total: 49
* please refer to the relevant technical datasheets for recoating and curing conditions

Remarks:

Attachments

Images
Image title Image description File name Image

Specification remark

Any technical advice and/or technical specifications involving Jotun products - created and submitted a customer by a Jotun approved dealer- are the sole responsibility of the dealer. Drying times and paint
consumptions will depend on conditions outside the manufacturer's control. For updated product information please check Jotun's web site www.jotun.com

08/11/2020 Page: 8