SPECIFICATIONS

Recorder Unit Standard Configuration

Measuring system Ultrasonic echo sensing system Recorder unit DMR-602R (DM-602R) Contained in box 41 kg
Recording system DM-602R Direct recording in two directions (X-X' or Y-Y') DMR-604R (DM-604R) Contained in box 41 kg
DM-604R Direct recording in four directions (X-X' and Y-Y') Power supply DMT-000R For 100 VAC, contained in box 9 kg
Recording paper Electrosensitive recording paper 250 mm x 20 m (DMP-250) (Built into DMT-001R For 110 VAC, contained in box 9 kg
Measuring 0.5 m 1.0 m 2.0 m 4.0 m Recorder unit) DMT-002R For 220 VAC, contained in box 9 kg
range Shift 0% 0 to 0.5 m 0 to 1.0 m 0 to 2.0 m 0 to 4.0 m Winch unit DMW-001R (DM-602R) With a sensor unit and cable 121 kg
(radius) 50% 0.25 to 0.75 m 0.5 to 1.5 m 1.0 to 3.0 m 2.0 to 6.0 m DMW-002R (DM-604R) With a sensor unit and cable 121 kg
100% 0.5 to 1.0 m 1.0 to 2.0 m 2.0 to 4.0 m 4.0 to 8.0 m Connecting cable CW-558R With 15-pin connectors 10 m
Paper Constant speed 7.5 mm/min, 15 mm/min, 30 mm/min and 60 mm/min AC power cable CW-71R With a 3-pin connector and 10 m
feed Synchronized 1/4 025 mm/m of sensor up/down movement one end plain
rate with 1/50 20 mm/m of sensor up/down movement Spare parts kit Included in Recorder unit 1 set
the depth 1/100 10 mm/m of sensor up/down movement Operation manual Contained in Recorder unit 1
1/200 5 mm/m of sensor up/down movement Brief operation for DM-602R Contained in Recorder unit 1
Measuring accuracy ±2% at full scale card for DM-604R Contained in Recorder unit 1
Depth mark
PC display and storage
A depth mark is printed every 1 m and depth is automatically printed numerically every 5 m
Serial data output provided (RS 232C cable)
Spare Parts List
Recording paper DMP-250 250 mm x 20 m (A3-560) 2
Koden promotes intelligent foundation work.
Power supply protection circuit Equipped with two built-in non-fuse breakers (2 A and 8 A), Recording stylus DMS-001 Included in a vinyl bag 2
a leakage breaker (20 A) and an overvoltage protection circuit
Current feed stylus DMS-002 Included in a vinyl bag 2
Power supply 100 VAC, 50/60 Hz 110 VAC, 50/60 Hz 220 VAC, 50/60 Hz
Power consumption 700 VA 700 VA 700 VA
(At 100 VAC) (At 110 VAC) (At 220 VAC)
Operating temperature -10°C to +50°C (14°F to 122°F)
Winch Unit
Up/down speed 0 to 20 m / min
Up/down movement distance 100 m maximum
Bottom and casing sensing system Automatic sensing by limit switch
Operating temperature -10°C to +50°C (14°F to 122°F)

DIMENSIONS AND WEIGHT

Recorder Unit Winch Unit

DMR-602R (DM-602R) DMW-001R (DM-602R)
DMR-604R (DM-604R) DMW-002R (DM-604R)
486 (19 9/64)

400 (15 3/4)

784 (30 55/64)
397 (15 5/8)
457 (17 63/64)

90 (3 9/16)
90 (3 9/16)

Sensor unit

Weight: 50 kg (111 lb) (for 100/110/220 VAC)

1390 (54 3/4) 660 (26)
1050 (41 11/32)
750 (29 17/32)

Weight: 121 kg (267 lb)

Unit: mm (inch)

• Design and specifications are subject to change without notice.

Deeper excavation measurement in high accuracy
Clear recording even in slurry contaminated with dirt and sand
Safety To ensure proper and safe use of the equipment, please carefully
precaution read and follow the instructions in the Operation Manual. High quality excavation work reducing time and cost
Tamagawa Office: For details, please contact:
2-13-24 Tamagawa, Ota-ku, Tokyo, 146-0095 Japan
Tel: +81-3-3756-6501 Fax: +81-3-3756-6509
Uenohara Office:
5278 Uenohara, Uenohara-shi, Yamanashi, 409-0112 Japan
Tel: +81-554-20-5860 Fax: +81-554-20-5875 www.koden-electronics.co.jp
[email protected]

www.koden-electronics.co.jp
15.03 Printed in Japan
The DM-602R/604R helps improve the quality of a drilled hole and reduces working time and cost!
General Main controls/switches RANGE switch
Used for switching the measuring
GAIN switch
Used for switching the gain con-
range (radius) in four steps of 0.5 m, trol method to AUTO or
1 m, 2 m and 4 m MANUAL
(Photograph shown is DM-604R operation panel)
Recent progress and development in foundation engineering has resulted in great strides in excavation techniques. CALIBRATION control
Used for calibrating the dis-
By using artificial slurry of high density and specific gravity, deeper excavation has been made possible. The DM- tance between the sensor and
602R/604R series Drilling Monitor system has been developed in compliance with the user’s needs arisen from the the wall face to the actual mea-
sured distance.
recent construction environment to accurately measure and record the shape of a drilled hole of greater depth. It can STC control (outer control)
be easily positioned and set up for measurement to provide quick and accurate recordings of excavations. The DM- Used for adjusting or eliminat-
ing irregular reflections near the
602R/604R series Drilling Monitor provides the following advantages. oscillation line.
Helps improve the quality of a drilled hole and reduces working time and cost. GAIN control (inner control)
Used for adjusting the receiving
Provides on site records of the perpendicularity of drilled holes and the shape of cross sections in high accuracy. gain.
Provides numerical measurement data that can be easily imported into various Windows applications (Excel, DEPTH RESET switch
Used to reset the depth record
Word, PowerPoint, etc.) for work reports, etc. to 0 m.
SPEED/DEPTH display
window
Used to display the speed and
the depth of the sensor.
Features External
Power Supply MANUAL MARK switch
Input As long as it is set to ON, the
manual mark is recorded on the
The DM-602R/604R supplies clear records of a drilled hole even in slurry, heavily contaminated with dirt and sand. POWER recording paper.
switch with PAPER SPEED switch
The DM-602R/604R supplies clear and precise records thanks to its unique signal processing technique that circuit breaker (MENU)
discriminates wall echoes from the noise. WINCH connector Used to change the paper
speed in 4 steps in CONSTANT
The DM-602R/604R has the facility to cancel the oscillation line echo that often prevents very close echo Voltage meter UP/STOP/DOWN switch WINCH UP/DOWN SPEED control and PROPORTIONAL speed
Used for selecting sensor move- Used for controlling the sensor up or down modes.
recordings. POWER connector ment between up, down or stop. speed (turning it to the right increases the
DATA PRINT/RECORD
The sensor device is automatically controlled to stop at the casing and at the bottom of the hole. An emergency Non-fuse breaker
speed).
START & STOP switch
return function is also included. DRILLING HOLE MARK WIDTH switch Used to start and stop recording
RECORDER Used for setting the reference value (diameter) as well as print text data.
Depth range mark, depth mark, drilled hole mark, date, time, etc. can be printed on the recording paper. POWER switch of the drilling hole on the wall face (in cm).
Limit switches are provided to avoid possible wire breakage or entanglement of the wire and cable.
The recorded result can be output to an external PC via a built-in RS 232C output port.
A non-fuse circuit breaker is used for circuit protection, eliminating the need for cumbersome fuse replacement Recording Examples
at the construction site.
X       X' Y'   Y      X'   X
DM-602R DM-604R

Drilling hole mark

Wall face

Depth mark (in 1-meter intervals)

Depth mark (in 5-meter intervals)

The winch unit and recorder unit on site

Recording the echo of a drilled hole