Scribd
Upload
460 views3 pages

Remedy For GPS Rollover in 2022: GP-80/90/150, GP-1650/1850, SC-50/110 and Others

For several Furuno GPS models, updates or retrofits are recommended to remedy the GPS rollover issue occurring on January 2nd, 2022. For some models a temporary fix is to activate the COLD START function, which will allow positioning but not restore the date. Some models will require attention at later rollover dates in 2028 and 2029 as well. The document provides update versions and procedures for initiating cold starts for various Furuno GPS models.

Uploaded by

Vikas Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
460 views3 pages

Remedy For GPS Rollover in 2022: GP-80/90/150, GP-1650/1850, SC-50/110 and Others

For several Furuno GPS models, updates or retrofits are recommended to remedy the GPS rollover issue occurring on January 2nd, 2022. For some models a temporary fix is to activate the COLD START function, which will allow positioning but not restore the date. Some models will require attention at later rollover dates in 2028 and 2029 as well. The document provides update versions and procedures for initiating cold starts for various Furuno GPS models.

Uploaded by

Vikas Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FURUNO HELLAS S.A.

10, Thetidos str.,


16675, Glyfada, Greece
GEMI Reg No: 44813407000
Phone: +30 210 4004426
Fax: +30 210 4004570
E-mail: [email protected]
[email protected]
www.furuno.gr

May 10th, 2021

Model GP-80/90/150, GP-1650/1850, SC-50/110 and others


Remedy for GPS Rollover in 2022

Take a remedy for the GPS Rollover that will occur on January 2, 2022.
When the rollover occurs, the date will be shown and output as May 19, 2002.
Note: When the rollover occurs, positions may not be calculated.
In such case, activate the COLD START function.

For the products of the models and GPS program numbers shown below, the
following remedy must be taken.

Model Built-in GPS core


GP-80
GP-90/DUAL,GP-150/DUAL
GP-1640/F
GN-8096C/D: 4850264***
GP-1650W/WD/WDF/WF,
GN-8097C/D: 4850296***
GP-1850W/WD/WDF/WF
GP-7000/F
GP-3500/F
GP-70MK2
GP-188
GP-280/380/680
GP-8000
PS-8000/MK2
FRS-1000 GB-97 (GN-8098): 4850311***
GP-1800
GP-500MK2
GP-3100/MK2
GP-3300
GP-32/37 GN-8093 chip set: 4850264***
GP-33 GN-8093D/E/F/G/H: 4850264***
GP-320B/ GP-330B/WS-200 GH-8299
FA-50/150 GN-8093D/E/F/G/H: 4850264***
SC-30/50/110 GS-8094C/D/E/F/G: 4850263***
FELCOM15/16 GN-8097B/C/D: 4850296***
FELCOM18/19
FURUNO HELLAS S.A.
10, Thetidos str.,
16675, Glyfada, Greece
GEMI Reg No: 44813407000
Phone: +30 210 4004426
Fax: +30 210 4004570
E-mail: [email protected]
[email protected]
www.furuno.gr

[Remedy]
For the following models, update the program.
Model Program version
GP-150/DUAL V.04.05
GP-3500/F V.06.03
GP-33 V.02.04
SC-30 V.03.03
SC-50/110 V.02.02 (Processor unit)
FA-50 V.02.02
FA-150 V.04.07
FELCOM15/16 V.03.11 / V.05.05
FELCOM18/19 V.01.20

For other models, retrofit is recommended.

[Temporary remedy]
Activate the COLD START function in accordance with the procedure in the appendix,
and then restart the system.
(Positions can be calculated after the COLD START function; however, the date will not
be restored.)

[Subsequent rollovers]

Occurrence date GPS core and program Model


Sep. 09, 2028 FGS3ELP-PX GP-25/27
Jan. 28, 2029 SUP500F GP-330B
FURUNO HELLAS S.A.
10, Thetidos str.,
16675, Glyfada, Greece
GEMI Reg No: 44813407000
Phone: +30 210 4004426
Fax: +30 210 4004570
E-mail: [email protected]
[email protected]
www.furuno.gr

(COLD START/MEMORY CLEAR Procedure)


Model Cold Start procedure
P-70MK2 [MENU]->[0]->[NEXT]->[NEXT]->[▼]->[Reverse mark]->[ENT]
GP-188 [MENU]->[9]->[9]->[0]->[9]->[1]->[8]->[8]->[ENT]
GP-80 [MENU]->[9]->[9]->[Clear GPS]->[Yes]->[ENT]
GP-90/DUAL [MENU]->[9]->[9]->[Clear GPS]->[Yes]->[ENT]
GP-150/DUAL [MENU]->[9]->[9]->[Clear GPS]->[Yes]->[ENT]
GP-1640/F [MENU]->[CONFIGURATION]->[SYSTEM MENU] ->[MEMORY/TRIP CLEAR]-
>[CLEAR GPS MEMORY]
GP-1650W/WD/WDF/WF [MENU]->[CONFIGURATION]->[SYSTEM MENU]-> [MEMORY/TRIP CLEAR]-
GP-1850W/WD/WDF/WF >[CLEAR GPS MEMORY]
GP-280/380/680 [MENU]->[9] System Setting->[2] GPS Setup->[Cold Start]->[Yes]
GP-1800 [MENU]->[9] [SYSTEM SETUP]->[CLEAR MEMORY]->[GPS]->[ENT] ->Turn
off and on the power.
GP-500MK2 [MENU]->[9]->[6]->[CLR]->[1]->[ENT]
FRS-1000 [PLTR MENU/ESC]->[0]->[7] SYSTEM SETTING->
[PAGE 4] BACK TO DEFAULTS->[GPS RCVR]->[ENT]->[ENT]
PS-8000/MK2 [PLTR MENU/ESC]->[0]->[7] SYSTEM SETTING-> CLEAR MEMORY->the
[Arrow] key->[GPS]->[ENT]->[ENT]
GP-7000/F MENU->ADVANCED->INPUT/OUTPUT->INTERNAL GPS SETUP-> RESTRT
GPS
GP-8000 [MENU]->[8]->[▼] CLEAR MEMORY->[ALL]->[ENT]
GP-3100/MK2/3300 [MENU]->[8] INITIAL SETTINGS->[↑]GPS INITIAL SETTINGS-> COLD
START->YES
GP-3500/F [MENU]->[0] SYSTEM SETUP->[6] TEST & MEMORY CLEAR ->[5] GPS
COLD START
GP-32/37 [MENU]->[ERASE]->[ENT]->[GPS DATA]->[ENT]->[ERASE GPS DATA?]-
>[YES]->[ENT]
GP-33 [Menu]->[System]->[ENT]->[Reset]->[ENT]->[GPS]->[ENT]->[On]-> [ENT]-
>[Yes]->[ENT]
GP-320B -When NAV1 is connected, it is available from [GPS SENSOR SETTINGS].
-When NAV1 is not connected, see FQ8-2020-001.

GP-330B/WS-200 Activate [COLD START] at every startup.

FA-50 COLD START from the MENU is unavailable.

FA-150 COLD START from the MENU is unavailable.

SC-30 Activate COLD START at every startup.

SC-50/110 [MENU]->[ERASE]->[ENT]->[GPS DATA?]->[YES]->[ENT]

FELCOM15/16 COLD START from the MENU is unavailable.

FELCOM18/19 COLD START from the MENU is unavailable.

You might also like