WL8200-X4

Indoor 802.11ax Wi-Fi 6 Dual Band Enterprise AP

Product Overview
WL8200-X4 is a dual-band high-performance gigabit
wireless access point device based on the 802.11ax
standard launched by DCN, it could offer maximum
2975Mbps access rate. WL8200-X4 works in the
2.4GHz and 5GHz frequency bands and supports
advanced wireless technologies such as MU-MIMO,
OFDMA, spatial multiplexing, and TWT. The first radio
of WL8200-X4 works in the 2.4GHz frequency band
and can provide a maximum access rate of 575Mbps; the
second radio works in the 5GHz frequency band and can
provide a maximum access rate of up to 2400Mbps.

802.11a/b/g/n/ac /ax 2975Mbps, 4*4 MIMO concurrent user 300+

anti-thief standard PoE input cloud management

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
1
Key Features and Highlights
Entry-level enterprise-class indoor 802.11ax Wi-Fi 6 that you want.
wireless access point
WL8200-X4 supports the 802.11ax standard, operates Anti-thief
in both 2.4 GHz and 5 GHz band, and provides an WL8200-X4 can work with Kensington technology to
access bandwidth up to 2975 Mbps. This model is the protect the investment of customers, which is very
best choice for middle-level office or company as it important to the specific customer.
can support concurrent users up to 300+.
Good PoE compatibility
Wireless user management at a fine granularity WL8200-X4 can work well with all PoE switch (cisco,
WL8200-X4 can support a maximum of 32 WLANs to HUAWEI, juniper, etc.) which support 802.3af & at
implement multi-layer multi-service management of standard, this allows to power up WL8200-X4 directly,
wireless users at a fine granularity. Each WLAN a power adapter is not required anymore.
supports access control and uplink/downlink rate limit
based on MAC or IP addresses. These WLANs may be Dual-mode fit & fat
bound to virtual local area networks (VLANs). WL8200-X4 can work in fit or fat mode and can
flexibly switch between the fit mode and the fat mode
Flexible installation according to network planning requirements.
WL8200-X4 supports wall mounting, ceiling mounting,
T-keel mounting, you can deploy it almost everywhere

Product Specifications
Hardware Specifications
Item WL8200-X4
Dimensions (L*W*D)
201 x 195 x 41
(mm)
2 x 10/100/1000/2500Mbps ethernet ports
Physical port t
1 x BLE module
Console port (RJ-45) 1
USB 2.0 2
Power supply 802.3at and External power adapter (Input: 100～240V AC , Output: 12 V DC)
Maximum power
<20W
consumption
RF port Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna
802.11b/g/n/ax: 2.4GHz-2.483GHz
Working frequency band
802.11a/n/ac/ax : 5.725~5.850GHz ; 5.150~5.350GHz；5.47~5.725GHz
11b：DSS: [email protected]/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g：OFDM:64QAM@48/54Mbps,16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
Modulation technology 11n：MIMO-OFDM: BPSK, QPSK,16QAM,64QAM
11ac：MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM
11ax: MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM,1024QAM
2.4GHz: 23dBm (Per Chain)
Transmit power 5GHz: 23dBm (Per Chain)
(Note: final output power comply with deployment regulation might be different)
Power adjustment
1 dBm
granularity
Working/Storage –10°C to +55°C
temperature –40°C to +70°C
Working/Storage RH 5% to 95% (non-condensing)

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
1
Protection level IP41

Software Specifications

Item Feature WL8200-X4

Product positioning Indoor dual-frequency
Working frequency band 2.4 GHz and 5 GHz
Bandwidth performance 2975Mbps
Virtual AP (BSSID) 32
Concurrent user 300+
Number of spatial streams 2.4GHz:2, 5GHz:4
Dynamic channel adjustment (DCA) Yes
Transmit power control (TPC) Yes
Blind area detection and repair Yes
WLAN
SSID hiding Yes
RTS/CTS Yes
RF environment scanning Yes
Hybrid access Yes
Restriction on the number of access users Yes
Link integrity check Yes
Intelligent control of terminals based on
Yes
airtime fairness
High-density application optimization Yes
Space streams 2.4GHz:2, 5GHz:4
Frequency band 2.4GHz +5GHz
80 MHz bundling Yes
Frame aggregation (A-MPDU) Yes
Frame aggregation (A-MSDU) Yes
802.11ax
Maximum likelihood demodulation (MLD) Yes
Transmit beamforming (TxBF) Yes
Maximum ratio combining (MRC) Yes
Space-time block coding (STBC) Yes
Low-density parity-check code (LDPC) Yes
Encryption 64/128 WEP, TKIP, and CCMP encryption
802.11i Yes
WAPI Yes
MAC address authentication Yes
LDAP authentication Yes
PEAP authentication Yes
WIDS/WIPS Yes
Security
Protection against DoS attacks Anti-DoS for wireless management packets
Frame filtering, white list, static blacklist,
Forwarding security
and dynamic blacklist
AP L2 forwarding suppression
User isolation
Isolation between client
Periodic SSID enabling and disabling Yes
Access control of free resources Yes

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
2
Item Feature WL8200-X4
Wireless SAVI Yes
Access control of various data packets such
ACL
as MAC, IPv4, and IPv6 packets
Secure access control of APs, such as MAC
authentication, password authentication, or
Secure access control of APs
digital certificate authentication between an
AP and an AC
802.11W Yes, encryption of management frames
Static IP address configuration or dynamic
IP address setting
DHCP address allocation
IPv6 forwarding Yes
IPv6 portal Yes
Local forwarding Yes
Forwarding Multicast IGMP snooping
Roaming Yes
Signal strength, bit error rate, RSSI, S/N,
AP switching reference whether neighboring APs are normally
operating, etc.
WDS Yes
WMM Yes
Ethernet port 802.1P identification and
marking
Priority mapping
Mapping from wireless priorities to wired
priorities
Mapping of different SSIDs/VLANs to
different QoS policies
QoS policy mapping Mapping of data streams that match with
different packet fields to different QoS
policies
L2-L4 packet filtering and flow classification Yes: MAC, IPv4, and IPv6 packets
Load balancing based on the number of users
QoS Load balancing Load balancing based on user traffic
Load balancing based on frequency bands
Bandwidth limit based on APs
Bandwidth limit based on SSIDs
Bandwidth limit Bandwidth limit based on terminals
Bandwidth limit based on specific data
streams
Call admission control (CAC) CAC based on the number of users
Power saving mode Yes
Automatic emergency mechanism of APs Yes
Intelligent identification of terminals Yes
Multicast enhancement Multicast to unicast
BYOD Identification of terminals
Centralized management through an AC;
Network management
both fit and fat modes
Maintenance mode Both local and remote maintenance

Management Log function Local logs, Syslog, and log file export
Alarm Yes
Fault detection Yes
Statistics Yes

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
3
Item Feature WL8200-X4
An AP working in fit mode can switch to the
fat mode through a wireless AC;
Switching between the fat and fit modes An AP working in fat mode can switch to the
fit mode through a local control port or
Telnet.
Remote probe analysis Yes

Dual-image (dual-OS) backup mechanism Yes

Watchdog Yes

Typical Application
WL8200-X4 is ideal AP for indoor Wi-Fi coverage, with zero touch provisioning, advanced RF control and
cost-effective design, it could offer best indoor Wi-Fi experience for customers.

Class room Medium-sized Meeting room Office

WL8200-X4
⚫ 802.11ax, Wi-Fi 6
⚫ Access bandwidth 2975Mbps
⚫ 802.3at PoE
⚫ Anti-thief
⚫ Concurrent user 300+

Hospital

Order Information
Product Description
WL8200-X4 DCN Indoor Wi-Fi 6 AP, 802.11a/b/g/n/ac/ax supported (2.4GHz:2*2, 5GHz:4*4),

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
4
 max 2975Mbps access rate, fat & fit, 802.3at PoE, default no power adapter, managed
by DCN hardware controller & cloud platform

Tel: +86-10-82707033 Fax: +86-10-82705112

Email: [email protected], [email protected] Website://www.dcnglobal.com
5