MHT-X 10130

Created on June 16, 2021 at 10:04:32 AM UTC

Technical sheet :

MHT-X 10130
 MHT-X 10130 - Created on June 16, 2021 at 10:04:32 AM U TC

Capacities Metric
Max. capacity Q 13000 kg
Load centre of gravity c 600 mm
Max. lifting height h3 9.65 m
Max. Reach l4 5.17 m
Weight and dimensions
Unladen weight (with forks) 18490 kg
Ground clearance m4 0.44 m
Wheelbase y 3.37 mm
Overall width b1 2.51 m
Overall height h17 2.99 m
Overall cab width b4 0.93 m
Tilt-down angle a5 117 °
Tilt-up angle a4 18 °
External turning radius (over tyres) Wa1 5.34 m
Outer turning radius (with forks) b15 6.15 m
Forks length / width / section l/e/s 1200 mm x 200 mm / 70 mm
Frame levelling corrector a9 10 °
tires
Standard tyres Aeolus - A2233 - 17.5 R25
Number of front wheels / rear wheels 2/2
Steering wheels (front / rear) 2/2
Drive wheels (front / rear) 2/2
Steering mode 2 wheel steer, 4 wheel steer, Crab mode
Engine
Engine brand Mercedes
Engine norm Stage III A
Engine model OM 904 LA. E3A/1
Number of cylinders / Capacity of cylinders 4 - 4250 cm³
I.C. Engine power rating / Power (kW) 176 Hp / 129 kW
Max. torque / Engine rotation 675 Nm@1200 rpm
Engine cooling system Water
Number of batteries 2
Battery / Batteries capacity 12 V / 120 Ah
Drawbar pull (Laden) 10800 daN
Transmission
Transmission type Hydrostatic
Number of gears (forward / reverse) 2/2
Max. travel speed 31 km/h
Parking brake Automatic Negative Hand-brake
Service brake Hydraulic
Hydraulics
Hydraulic pump type Variable pump
Hydraulic flow - Pressure 180 l/min - 300 Bar
Tank capacities
Engine oil 21 l
Hydraulic oil 290 l
Fuel tank 315 l
Noise and vibration
Noise at driving position (LpA) 80 dB(A)
Noise to environment (LwA) 107 dB(A)
Vibration on hands/arms < 0 m/s²
Miscellaneous
Safety / Safety cab homologation Standard EN 15000 - ROPS - FOPS cab (level 2)
Controls JSM
 MHT-X 10130 - Created on June 16, 2021 at 10:04:32 AM U TC

Dimensional drawing

Load chart
Machine on tyres with forks LC 1200 mm Metric Machine on tyres with jib Metric
 MHT-X 10130 - Created on June 16, 2021 at 10:04:32 AM U TC

Machine on tyres with platform Metric

Siège Social
430 rue de l’Aubinière - 44150 Ancenis Cedex - France
Tel: +33(0)2 40 09 10 11 - Fax: +33 (0)2 40 09 10 97
www.manitou.com

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment.
The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves
the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable
for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product
descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the
company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams
contained in thisbrochure are provided for information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,668,399 euros - 857 802 508 RCS Nantes