Scribd
Upload
65 views

Pump System Calculations

This document provides specifications for a LO-201 pump that can move 340 gallons per hour of #2 fuel oil at 50 PSI. It details the pump's suction and discharge parameters including pipe sizing and fittings, fluid properties, pressure and flow rates, and elevation details. The storage tank is below the pump with 1 foot of lift. The pump can provide the required 5 PSIG pressure at a 12 foot elevation at the end user.

Uploaded by

Pinak Projects
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
65 views

Pump System Calculations

This document provides specifications for a LO-201 pump that can move 340 gallons per hour of #2 fuel oil at 50 PSI. It details the pump's suction and discharge parameters including pipe sizing and fittings, fluid properties, pressure and flow rates, and elevation details. The storage tank is below the pump with 1 foot of lift. The pump can provide the required 5 PSIG pressure at a 12 foot elevation at the end user.

Uploaded by

Pinak Projects
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Firefox https://www.preferred-mfg.com/resources/tools/fos-print.

html&p=1531

Preferred Utilities Mfg Corp

Prepared for: abc


Project: abc
Contact: nil
Email: [email protected]

Suction Discharge
LO-201 (340 GPH of # 2 @ 50 PSI)
Fluid S.G. Temp Viscosity Temp Viscosity Altitude
#2 Fuel Oil 0.887 60℉ 45 SSU 60℉ 45 SSU 0 Ft. Actual: 340 GPH

Tank Below Pump

The storage tank is below the centerline of the pump. The piping never
runs above the centerline of the pump, before connecting to the pump.

A. Tank Height, feet 4


B. Top of Tank to Pump
1
centerline, feet
C. Pump Discharge to User
12
Elevation, feet
D. Pressure required at User,
5
PSIG

SUCTION

Primary Pipe: 1" Type K Copper, Brass or Lead Tubing


Temperature: 60℉

1 of 4 7/26/2020, 4:43 PM
Firefox https://www.preferred-mfg.com/resources/tools/fos-print.html&p=1531

Viscosity: 45 SSU
Specific Gravity: 0.887
Altitude: 0 ft.

Piping Friction Loss: 0.28 "Hg


Fitting Friction Loss: 1.24 "Hg
Strainer Friction Loss: 0.00 "Hg
Anti-Siphon Loss: 0.00 "Hg
Static Lift: 3.91 "Hg
Pump Suction: 5.42 "Hg

Priming Static Lift: 3.91 "Hg


Primary Velocity: 2.34 ft/s
NPSHa (Available): 30.21 ft of oil
NPSHa (Required): 4.40 ft of oil

DISCHARGE

Primary Pipe: 1-1/2" Type K Copper, Brass or Lead Tubing


Temperature: 60℉
Viscosity: 45 SSU

Required End Pressure: 5.00 psig


Piping Friction Loss: 0.59 psig
Fitting Friction Loss: 0.18 psig
Strainer Loss: 0.00 psig
Static Head: 4.61 psig
Pump Pressure: 10.37 psig

2 of 4 7/26/2020, 4:43 PM
Firefox https://www.preferred-mfg.com/resources/tools/fos-print.html&p=1531

Primary Velocity: 1.06 ft/s

Pipe & Fitting Data

Suction

Pipe: Primary Secondary


Size (in.) 1"
Type K
Length (ft.) 10
Strainer:
Size None
Mesh
Fittings:
90 deg Elbow 4 0
45 deg Elbow 0 0
Tee-flow thru run 0 0
Tee-flow thru branch 0 0
Single Poppet Foot Valve 1 0
Double Poppet Foot Valve 0 0
Hinged Foot Valve 0 0
Lever Gate Valve 0 0
Tank Selector Valve 0 0
Fusomatic Valve 3/4" or 1" 0 0
Gate Valve 0 0
Globe Valve 0 0
Ball Valve 0 0
Swing Check Valve 0 0
Lift Check Valve 0 0

3 of 4 7/26/2020, 4:43 PM
Firefox https://www.preferred-mfg.com/resources/tools/fos-print.html&p=1531

Discharge

Pipe: Primary Secondary


Size (in.) 1-1/2" 2"
Type K K
Length (ft.) 50 500
Strainer:
Size None
Mesh
Fittings:
90 deg Elbow 4 8
45 deg Elbow 0 0
Tee-flow thru run 2 10
Tee-flow thru branch 0 0
Single Poppet Foot Valve
Double Poppet Foot Valve
Hinged Foot Valve
Lever Gate Valve 0 0
Tank Selector Valve 0 0
Fusomatic Valve 3/4" or 1" 0 0
Gate Valve 2 10
Globe Valve 0 0
Ball Valve 0 0
Swing Check Valve 1 0
Lift Check Valve 0 0

4 of 4 7/26/2020, 4:43 PM

You might also like